where uidate is a calculated field in my dataset that always has the value of 05/29/2012 (using formatdatetime("05/29/2012",dateformat.ShortDate))
Everything else is set to Auto, with stripwidth=0
I'm trying to display a single vertical line at the x-axis value of 05/29/2012
I have previously tried setting the interval offset to "05/29/2012" but that didn't work. I've also tried setting the value of a hidden text box on the report to "05/29/2012" and setting the interval offset to the value of that text box, but that gave me a "text box not declared" error.
How I can simply display a vertical stripline on my line graph at the x-axis value of 05/29/2012 ?
I'm putting Interval 50 and Maximum 100 in Vertical Axis Property but by default 0 is coming. I unchecked mark of Always include Zero Box and Minimum is Auto. But still I'm getting 0 in Vertical Axis Chart in SSRS.
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select /* Set Week End date as Sunday */ DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate +1 AS DATE)) as[WeekEnd] ,count(t.TaskBaseline0FinishDate) as Baseline ,count(t.TaskFinishDate) as Finish
When I tried to create a bar chart using SSRS 2012, the vertical axis values are repeating for smaller data sets values. It's only happening when the data labels are below 5, when the data is above 5 this chart represents data fine.
I tried specifying the custom intervals and this option all together eliminated the bar for value 1, instead it only showed the value 1 as text on the chart.
I tried changing the data interval type as number and the data type is of Integer, these are counts which I am showing in the chart.
i need to create a 32 tile Heatmap in SSRS 2008 R2,I am not too concerned with adjusting colours by values, I just need to get the 32 tiles in place in the report initially, then extend it with more functionality later on.
We want to create interactive dashboards using SSRS 2008 R2. We currently has Report Server installed in Native mode. I see that we can build some good dashboards using SSRS, SharePoint 2010 and PerformancePoint. But I wanted to find out if we can build that level of dashboard using just SSRS. We are still convincing the management for getting SharePoint license. In case if they don't agree for the Sharepoint license, can we build some good dashboards just using SSRS?
I made one report in SSRS 2008 in which getting data from one SharePoint List.
three parameters in report :
Country StartDate EndDate
I am using query which I created with CAML.
query is running well and data is coming correctly if I run this on Query designer.and date format must be YYYY-MM-DD.but when I try to run through on run time then the date control is showing format dd/mm/yyyy.
I change the regional settings of windows and SharePoint site to English(United States). and when I select date control it is also putting date in format like "YYYY-MM-DD'. and in that format report is working well in Query designer view.But on run time still it is not working.
I have a requirement to display the total of a Group after subtracting a specific value from the same Group.
Example: Say the below data is grouped on a particular column
Group Values Month
Jan-15 Feb-15 Mar-15
A 10 20 30 B 5 10 25 C 1 2 3 D 5 10 15
Total 11 22 33
Formula is : Sum(A+C+D)- Sum(B)
What is the best way to Group the above scenario from SSRS level and display the result as shown above. I am able to display all the values except the last total row where am displaying the complete total i.e. 21 42 73.
How do I dynamically subtract the values for row B which is one of the group values.
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I'm using SSRS 2005 which connects to SQL Server 2005. I need to pass Multi valus for single parameter...
E.g. Command type : Text SELECT * FROM COUNTRY where CountryId IN ( @CountryID)
If i tried to preview using single parameter, it shows the record without any problem. However when i tried to put multi values, it gives error message?? I read somewhere which says, need to set to multivalue. But, i could not find the place to set the multi value option...
How to solve it?? Your suggestion/recommendations greatly appreciated.
I have report where i should create a report which is multivalued parametr report,but here my condition is i want to see only one county name in my output that is Ex: Asia Specific (CountryName),I dnt want to see the other Country names,So how should we create for this condition .
I have 2 datasets, dataseta is a list of tickets and their relevant owner and databsetb is a list of owners and a days worked first against them.I have a table with a detail grouping on ticketid and a normal grouping on owner which works well... all straight forward to this point. In this table on the owner grouping level I also have a lookup to datasetb which pulls back the days worked per owner which works fine as well. But what I now need to do is total the days worked over all owners, which sounds simple but doesn't work. This is the expression on the days worked for each owner -
I've got an SSRS 2008 report with 4 nested groups on rows. Report requirements are that each new group at each level have a subtotal. I've gotten this to work just fine. After the users saw the report, they had a new request - if the SubTotal has only 1 row to Subtotal, do not display the Subtotal. If there are 2 or more rows, display the Subtotal line.I know I can go to the Grouping Properties, and on the Visibility properties select the "Show or hide based on the expression" - I am struggling with the experssion. How can I check to see if there are more than one row at this group level? The query is SQL with 2 sub selects, and 7 tables in various join clauses.
I need to have a report that will have formulas in excel. I understand that the limited support for exporting excel formulas has been dropped in SSRS 2008. Is there any way to work around this and still output formulas?obvioulsy the way to do it in previous versions of SSRS are not working (using report items). I tried to add my formulas in my dataset (I can know which excel cells I need in the formulas) but they end up being displayed as text. I then have to get in the excel file and enter and exit each cell so that it "becomes" a formula.
I have database fields that contain RTF text. If I use the default Textbox in SSRS 2008 Report Designer, I get all the RTF formating characters, which makes for a VERY ugly report.Is there another control I can place on my report that will take the RTF formated text and display it properly? I can do this in Crystal Reports, but I'm converting to SSRS 2008 so I need to be able to handle RTF formated text.
I have a dataset in my report that pulls 10 fields. One of the tablixes on report should display only 8 of the 10 fields and this is causing the duplicate records to show up on the tablix.I tried hide duplicates option for the entire details row and have set the scope to "Details". It did not work. I am getting the data from a stored procedure and cannot do much on that.
VS 2008. I have the following set up. Group1, Group2, Group3 header, Group 3 detail rows..When I set the row visibility (hide based on Group2) on the Detail row, it still shows up when the report is originally rendered.
It should be: Group1 expanded, Group2 collapsed, Group3 header hidden and detail rows hidden It is showing: Group1 expanded, Group2 collapsed, Group3 header hidden, Group3 detail row visible.
I never had this trouble in 2005. Is there something different about row visibility in 2008?
we need the list suppliers in a text box,if it were a parameter, we can do it by =join(parameters!Supplier_ID.Value,",")but if the Supplier Id is a field , join (Fields!Supplier_ID.Value,",") doesnt work!how to achieve this.