Reporting Services :: PivotTable Report In SSRS 2008 R2

Jun 17, 2015

What is the best approach for turning the report below into a PivotTable report in SSRS 2008 R2?The PivotTable has the following characsteristics:

Filters:     None
Columns: Mat_Month
Rows:      Level1, Level2
Values:    MaturingBalances

We have an SSAS Cube with the same data (in a dimensional schema).The report (currently sourced via SQL from our data warehouse):The Pivot Table - currently in Excel but needs to be ported to SSRS

View 3 Replies


Reporting Services :: Displaying RTF Text In SSRS 2008 Report

Nov 8, 2009

I have database fields that contain RTF text. If I use the default Textbox in SSRS 2008 Report Designer, I get all the RTF formating characters, which makes for a VERY ugly report.Is there another control I can place on my report that will take the RTF formated text and display it properly? I can do this in Crystal Reports, but I'm converting to SSRS 2008 so I need to be able to handle RTF formated text.

View 4 Replies View Related

Reporting Services :: SSRS 2008 CSV Export Blank Report With Commas?

Sep 1, 2011

We have recently upgraded to SP1 of SSRS 2008. As a result, when we export a blank report to CSV, we now get a line of commas below the headings. Or found a way to not include the commas?
New SSRS Output

Old SSRS Output


View 4 Replies View Related

Reporting Services :: SSRS 2008 Report Timeout For User Not For Admin?

Sep 17, 2015

When a user runs the report after a minute or 3 the user gets a timeout message, if an administrator runs te same report he will get the results. No errors in log. report timeout on 1800 seconds

View 2 Replies View Related

Reporting Services :: SSRS 2008 Report Invalid Parameter Warning Not Clearing Out

Jul 16, 2015

I am using SSRS 2008 and the reports we have use parameters of type Date/Time.  The reports work well when the parameter values are entered correctly.

When entering an invalid date format for one of the Date/Time parameters the following error is displayed "The value provided for the report '<parameter name>' is not valid for its type. (rsReportParameterTypeMismatch).  This seems to be working correctly as well.  However, when the correct date format is then entered for the report parameter for which the report threw an error, the error persists and the report doesn't run again.  Setting the parameter to "NULL" doesn't work either.

The only way to get the report to run again is to refresh the entire report.  Of course, if at that point one has entered a bunch of other parameter values, those values all disappear.

View 2 Replies View Related

Reporting Services :: SSRS 2008 Wants To Filter The Prod Order Status Report

Jul 9, 2015

Created Prod order status report, in status, we have different status

created =0
start =4
released =3
reported as finished =5
ended =7

I have the report, in report don't want to show the Prod order for ended status, how can I add the filter for this so it can show for all the other status not ended status. when I did on filter  <7 ,  it did not work

View 4 Replies View Related

Reporting Services :: SSRS 2008 Report Parameter Default Value Doesn't Work When Deployed

May 12, 2010

I have a parameter that chooses its available items from a query (with a label and a value column). I set the default for the parameter to the a particular value.

It works in Preview from design mode, but when I deploy it and run the report, it does not set the default.

View 5 Replies View Related

Reporting Services :: Start And End Date Parameters Report In SSRS 2008 Is Not Running On Runtime?

Aug 27, 2015

I made one report in SSRS 2008 in which getting data from one SharePoint List.

three parameters in report :


I am using query which I created with CAML.

query is running well and data is coming correctly if I run this on Query designer.and date format must be YYYY-MM-DD.but when I try to run through on run time then the date control is showing format dd/mm/yyyy.

I change the regional settings of windows and SharePoint site to English(United States). and when I select date control it is also putting date in format like "YYYY-MM-DD'. and in that format report is working well in Query designer view.But on run time still it is not working.

View 3 Replies View Related

Reporting Services :: How To Calculate Percentage And Difference Of Two Values In Matrix Report In Ssrs 2008

Dec 2, 2014

I am creating matrix report with grouping on WEEK and Fiscalyearweek,I need to calculate of difference between FY14W01,FY15W01 ande  percentage of to calculate in ssrs level.

View 13 Replies View Related

Reporting Services :: SSRS 2008 - Report Builder Download To Domain Level Clients Not Working

Feb 5, 2010

I have created a new SSRS Server and done all of the basic security setup for the site but I am having trouble with client machine access...At first I had an issue with being able to access report manager from any client and ended up having to shut off windows authentication on the client IE settings to get it to work.  Now I am trying to run Report Builder from a client machine and it will not download. The client machine is on the same domain and my user id is set as an administrator within SSRS and as a local admin on the 2008 server. 

I had the thought that without windows auth in the browser maybe it can't permit me access to the application but if I turn it on I can't get to it to download it.  I have set Full Control rights to the folder as well. Most of the info out there is for 2005 and that uses IIS to host the pages where as 2008 does not. Here is the details of the error:

PLATFORM VERSION INFO Windows    : 6.1.7600.0 (Win32NT) Common Language Runtime  : 2.0.50727.4927 System.Deployment.dll   : 2.0.50727.4927 (NetFXspW7.050727-4900) mscorwks.dll    : 2.0.50727.4927 (NetFXspW7.050727-4900) dfdll.dll    : 2.0.50727.4927 (NetFXspW7.050727-4900) dfshim.dll    : 2.0.50727.4927 (NetFXspW7.050727-4900)

[URL] ....

View 2 Replies View Related

Reporting Services :: Adding Dataset Parameter Doesn't Add Report Parameter In Visual Studio 2008 SSRS

Apr 22, 2015

I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter.  If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank.  However, sometimes this will automatically add. 

Is this a bug in Visual Studio?  How do I get around this? 

View 3 Replies View Related

Reporting Services :: SSRS 2008 R2 - HTTP Error 503 - The Services Is Unavailable

Jul 23, 2010

We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2.  It works nicely.  Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production).  After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable."  I can't connect via http, or SSMS.

We have tried:

* Running SSRS config tool (several times)

* Running with/without the IIS Server Role

* Dropping & recreating the SSRS keys

* Recreating the ReportServer database, etc

* Checking all of the accounts, permissions, etc

* Running SQL Repair

* Going through the registry to fix any references to the machine's old name

* Uninstalling, reinstalling SSRS

* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.

None of this has worked.  SSRS [R2] is still 503 on our test box.

the SSRS [NT] service seems to run, without error.  The Event Viewer doesn't seem to be recording any errors.  The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine.  The other SQL Logs say something about not being able to contact the service.  However, as I said, the [NT] service seems to be working fine.

View 4 Replies View Related

Reporting Services :: Row Percentage Calculation In SSRS 2008 R2

May 11, 2015

I have a matrix in one of my SSRS report data is like below

Row as Branch
Column as Tasks (Progress, Completed , cancelled, In Complete)

Branch   Progress  Completed  cancelled  In Complete    Total    %(Complete/Total)
Aus           1             2               3                 4                    9                      22.2%
NZ            1             2               3                5                    11                      18.88%
US           0              0               3                 3               6                          0.00%

How can do in the SSRS matrix %(Completed/Total) percentage calculation ?

View 4 Replies View Related

Reporting Services :: SSRS 2008 Legend Sorting?

Jun 10, 2009

Is there anyway in SSRS 2008 to sort the Legend on a chart?  Right now I am unsure as to how it is currently sorting.  I see a property to Reverse the order, but I don't see anything to alphabetize it.

View 8 Replies View Related

Reporting Services :: SSRS 2008 - Trying To Sum Lookup Values

Feb 13, 2012

I have 2 datasets, dataseta is a list of tickets and their relevant owner and databsetb is a list of owners and a days worked first against them.I have a table with a detail grouping on ticketid and a normal grouping on owner which works well... all straight forward to this point. In this table on the owner grouping level I also have a lookup to datasetb which pulls back the days worked per owner which works fine as well. But what I now need to do is total the days worked over all owners, which sounds simple but doesn't work. This is the expression on the days worked for each owner -

=lookup (Fields!owner. Value, Fields!owner.Value, Fields!Days_worked.Value,"datasetb")

If I add a sum around this then it uses the figure above but multiplies it by the amount of tickets in the detail grouping.

View 6 Replies View Related

Reporting Services :: Open URL In New Tab Rather Than New Window In SSRS 2008 R2

Dec 18, 2012

Below is my navigation URL link ..I want the drill through to open in new tab rather than new window..I believe i need to change the newwin.

="javascript:void('"+ Globals!ReportServerUrl + "?" +  Globals!ReportFolder + "%2fReportName&rs:Command=Render" +"&YQM='+escape('"+Parameters!YQM.Value.ToString() +"') +'&Status='+escape('"+Parameters!Status.Value.ToString()
+"') +  '',  'newwin', 'screenX=0,left=0,screenY=0,top=0,status=1,menubar=1,resizable=1,scrollbars=1,toolbar=1,location=1'))"

View 12 Replies View Related

Reporting Services :: SSRS 2008 R2 Not Processing Subscriptions?

Apr 29, 2015

I have a RS 2008 R2 SP3 Service in SharePoint Integrated Mode.

Since 5 days my Subscriptions were not sent anymore. I did no changes to these machines. There were some data driven subscriptions in pending state. I delete these entries via SharePoint.

When I look at Report server  Execution Logs, there is no error, that i can associate to subscriptions. New Subscription are created and deleted in the Log, but they will never been processed.

I have done a Reboot to the RS Box but, that was not the solution.

View 4 Replies View Related

Reporting Services :: SSRS 2008 Conditional SubTotal

Apr 23, 2010

I've got an SSRS 2008 report with 4 nested groups on rows.  Report requirements are that each new group at each level have a subtotal.  I've gotten this to work just fine.  After the users saw the report, they had a new request - if the SubTotal has only 1 row to Subtotal, do not display the Subtotal.  If there are 2 or more rows, display the Subtotal line.I know I can go to the Grouping Properties, and on the Visibility properties select the "Show or hide based on the expression" - I am struggling with the experssion.  How  can I check to see if there are more than one row at this group level? The query is SQL with 2 sub selects, and 7 tables in various join clauses. 

View 15 Replies View Related

Reporting Services :: Excel Formulas In SSRS 2008

Jul 20, 2010

I need to have a report that will have formulas in excel. I understand that the limited support for exporting excel formulas has been dropped in SSRS 2008. Is there any way to work around this and still output formulas?obvioulsy the way to do it in previous versions of SSRS are not working (using report items). I tried to add my formulas in my dataset (I can know which excel cells I need in the formulas) but they end up being displayed as text. I then have to get in the excel file and enter and exit each cell so that it "becomes" a formula.

View 11 Replies View Related

Reporting Services :: How To Enable ADFS For SSRS 2008

Aug 3, 2009

How to enable ADFS for SSRS 2008?

View 4 Replies View Related

Reporting Services :: SSRS 2008 R2 Toggle Display?

Sep 25, 2015

Is it possible to hide the entire toggle line and the symbol but still shows the children? I must keep the children in this container.



View 5 Replies View Related

Reporting Services :: SSRS 2008 - Print Preview In IE 11

Nov 16, 2015

I'm using SQL Server 2008 SP3 with Reporting Services 2008 SP3.

By opening my web application in IE9 and running report, i can print and show then print preview by clicking the "Print preview" button in printing dialog.

By opening my web application in IE11 and running report, i can print the report but if I click on the print preview on the print dialog nothing appears... Why?

View 3 Replies View Related

Reporting Services :: How To Remove Duplicate Rows In SSRS 2008

Dec 21, 2011

I have a dataset in my report that pulls 10 fields. One of the tablixes on report should display only 8 of the 10 fields and this is causing the duplicate records to show up on the tablix.I tried hide duplicates option for the entire details row and have set the scope to "Details". It did not work. I am getting the data from a stored procedure and cannot do much on that.

View 7 Replies View Related

Reporting Services :: SSRS 2008 - Row Visibility Is Not Working Correctly

Mar 2, 2012

VS 2008. I have the following set up. Group1, Group2, Group3 header, Group 3 detail rows..When I set the row visibility (hide based on Group2) on the Detail row, it still shows up when the report is originally rendered.

It should be: Group1 expanded, Group2 collapsed, Group3 header hidden and detail rows hidden
It is showing: Group1 expanded, Group2 collapsed, Group3 header hidden, Group3 detail row visible.

I never had this trouble in 2005. Is there something different about row visibility in 2008?

View 3 Replies View Related

Reporting Services :: Using Join Function For Fields In SSRS 2008

Jun 30, 2009

we need the list suppliers in a text box,if it were a parameter, we can do it by =join(parameters!Supplier_ID.Value,",")but if the Supplier Id is a field , join (Fields!Supplier_ID.Value,",") doesnt work!how to achieve this.

View 9 Replies View Related

Reporting Services :: SSRS 2008 Subreport Showing Error

Sep 12, 2011

Presently I have a main report and subreport, with the subreport having values for a carbon copy contact, which when it is displayed it shows these values:
Peter Piper      #Error      #Error      #Error
Donald Duck    #Error      #Error    #Error
When I run the subreport directly, it correctly returns all the values:
Peter Piper      123-345-6789      Calgary      T
Donald Duck    987-654-3210      Calgary     F
Here are the details on SQL Server 2008:
Microsoft SQL Server 2008 (SP2) - 10.0.4064.0 (X64)   Feb 25 2011 13:56:11   Copyright (c) 1988-2008 Microsoft Corporation  Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2) 
why the #Error is showing up the the main report?

View 3 Replies View Related

Reporting Services :: Unable To Bind A New Certificate In SSRS 2008 R2

Feb 22, 2011

I've had a SSL wildcard certificate successfully in use, unless it had to be replaced because of its age. Now I've imported a new certificate, but unfortunately I'm unable to set it up in the SSRS Configuration Manager Console (Web Service URL / Report Manager URL), because "We were unable to create the certificate binding". 
Here is the Error Message: 
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 80070520
 ---> System.Runtime.InteropServices.COMException (0x80070520): A specified logon session does not exist. It may already have been terminated. (Exception from HRESULT: 0x80070520)
   --- End of inner exception stack trace ---
I've also deleted the existing bond in the netsh console with "netsh>http delete sslcert ipport=", but this still doesn't fix the issue.

View 3 Replies View Related

Reporting Services :: Create 32 Tile Heatmap In SSRS 2008 R2?

Dec 23, 2011

i need to create a 32 tile Heatmap in SSRS 2008 R2,I am not too concerned with adjusting colours by values, I just need to get the 32 tiles in place in the report initially, then extend it with more functionality later on.

View 4 Replies View Related

Reporting Services :: Can Grow Property Is Not Working In Ssrs 2008 R2

Jan 31, 2011

Currently i am working on SSRS 2008 R2.The issue is that it is wrapping long words and not growing. I set the property can grow to True.

How to prevent the word wrapping?

For example, the column will have the word "information" in it. Instead of the column showing:


it shows:


The "n" gets wrapped to the next line. Is there a way to prevent this from happening.

How to prevent the word wrapping?

View 4 Replies View Related

Reporting Services :: Tablix Headers Not Repeating In SSRS 2008

Nov 3, 2008

I have created a new report & add a table to it. When I select "Tablix Properties" and check on Columns Headers -> "Repeat Cheader columns on each page" the header columns do not repeat on each page. I also tried "Repeat header rows on each page". "Add page break before" seems to work ok. I am using VS 2008 9.0.30729.1 SP..I also tried deploying but it still does not work on the deployed version.

View 69 Replies View Related

Reporting Services :: Get Report Toolbar Using SOAP API In SSRS Reporting?

Nov 3, 2015

Is there any way to get the report toolbar using SOAP Api  in SSRS reporting.

View 6 Replies View Related

Reporting Services :: Domain User - Unable To Run Report In SSRS Report Manager?

Oct 9, 2015

I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting. 

View 6 Replies View Related

Reporting Services :: SSRS Report Runs In Visual Studio But Not Report Manager

Jul 5, 2012

I have written a report visual studio.  The report has 10 multi-value parameters that pull data from their individual data sets within the reports.  When running the report from within Visual Studio it renders fine.  There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing.  None of the headers or static text is displayed.  The results window is blank.

The report defaults all the parameter values.  In trying to debug the issue I have found by reducing the number of parameter values the report will render.  Once I have all the values added, the report does nothing.Below is the query being used for the report.  The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.

a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,


View 7 Replies View Related

Copyrights 2005-15, All rights reserved