When a user runs the report after a minute or 3 the user gets a timeout message, if an administrator runs te same report he will get the results. No errors in log. report timeout on 1800 seconds
View 2 RepliesAfter publishing report on server and accessing it from URL its prompting for the USER ID and pAssword of Admin user of the server. Have tried to find the Virtual Directory of the Reporting server on IIS - which is not available. or unable to find the same. Apart from this have saved the Database credential in the report itself.
View 5 Replies View RelatedI just setup a developer as a site admin in SSRS, he has administration rights to the site and also rights on folders that contain reports. He can access the reports folders no problem, however when he tries to access the "Home" folder he get's the error shown below.
UAC is switched off an other people are able to access this ok.
What is the best approach for turning the report below into a PivotTable report in SSRS 2008 R2?The PivotTable has the following characsteristics:
Filters: None
Columns: Mat_Month
Rows: Level1, Level2
Values: MaturingBalances
We have an SSAS Cube with the same data (in a dimensional schema).The report (currently sourced via SQL from our data warehouse):The Pivot Table - currently in Excel but needs to be ported to SSRS
I have database fields that contain RTF text. If I use the default Textbox in SSRS 2008 Report Designer, I get all the RTF formating characters, which makes for a VERY ugly report.Is there another control I can place on my report that will take the RTF formated text and display it properly? I can do this in Crystal Reports, but I'm converting to SSRS 2008 so I need to be able to handle RTF formated text.
View 4 Replies View RelatedI have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedWe have recently upgraded to SP1 of SSRS 2008. As a result, when we export a blank report to CSV, we now get a line of commas below the headings. Or found a way to not include the commas?
New SSRS Output
Portfolio_Reference,Portfolio_Name,R,TR,TD,TC,D,
Old SSRS Output
Portfolio_Reference,Portfolio_Name,R,TR,TD,TC,D,
I need to know is there any way to end user customization with SSRS, we are using ASP.Net page, we need to create SSRS report with end user customization like mail merge, but we don't want end user to use Report Builder or Report Designer.
View 6 Replies View RelatedI am using SSRS 2008 and the reports we have use parameters of type Date/Time. The reports work well when the parameter values are entered correctly.
When entering an invalid date format for one of the Date/Time parameters the following error is displayed "The value provided for the report '<parameter name>' is not valid for its type. (rsReportParameterTypeMismatch). This seems to be working correctly as well. However, when the correct date format is then entered for the report parameter for which the report threw an error, the error persists and the report doesn't run again. Setting the parameter to "NULL" doesn't work either.
The only way to get the report to run again is to refresh the entire report. Of course, if at that point one has entered a bunch of other parameter values, those values all disappear.
Created Prod order status report, in status, we have different status
created =0
start =4
released =3
reported as finished =5
ended =7
I have the report, in report don't want to show the Prod order for ended status, how can I add the filter for this so it can show for all the other status not ended status. when I did on filter <7 , it did not work
I have a parameter that chooses its available items from a query (with a label and a value column). I set the default for the parameter to the a particular value.
It works in Preview from design mode, but when I deploy it and run the report, it does not set the default.
I made one report in SSRS 2008 in which getting data from one SharePoint List.
three parameters in report :
Country
StartDate
EndDate
I am using query which I created with CAML.
query is running well and data is coming correctly if I run this on Query designer.and date format must be YYYY-MM-DD.but when I try to run through on run time then the date control is showing format dd/mm/yyyy.
I change the regional settings of windows and SharePoint site to English(United States). and when I select date control it is also putting date in format like "YYYY-MM-DD'. and in that format report is working well in Query designer view.But on run time still it is not working.
I am creating matrix report with grouping on WEEK and Fiscalyearweek,I need to calculate of difference between FY14W01,FY15W01 ande percentage of those..how to calculate in ssrs level.
View 13 Replies View RelatedI need to create an report from SSRS and then exported it in excel for the user. It has dynamic header/footer and dynamic excel sheet name. The developer told that it is not possible to have both the things dynamic.
View 2 Replies View RelatedI have created a new SSRS Server and done all of the basic security setup for the site but I am having trouble with client machine access...At first I had an issue with being able to access report manager from any client and ended up having to shut off windows authentication on the client IE settings to get it to work. Now I am trying to run Report Builder from a client machine and it will not download. The client machine is on the same domain and my user id is set as an administrator within SSRS and as a local admin on the 2008 server.
I had the thought that without windows auth in the browser maybe it can't permit me access to the application but if I turn it on I can't get to it to download it. I have set Full Control rights to the folder as well. Most of the info out there is for 2005 and that uses IIS to host the pages where as 2008 does not. Here is the details of the error:
PLATFORM VERSION INFO Windows : 6.1.7600.0 (Win32NT) Common Language Runtime : 2.0.50727.4927 System.Deployment.dll : 2.0.50727.4927 (NetFXspW7.050727-4900) mscorwks.dll : 2.0.50727.4927 (NetFXspW7.050727-4900) dfdll.dll : 2.0.50727.4927 (NetFXspW7.050727-4900) dfshim.dll : 2.0.50727.4927 (NetFXspW7.050727-4900)
[URL] ....
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I have a matrix in one of my SSRS report data is like below
Row as Branch
Column as Tasks (Progress, Completed , cancelled, In Complete)
Branch Progress Completed cancelled In Complete Total %(Complete/Total)
Aus 1 2 3 4 9 22.2%
NZ 1 2 3 5 11 18.88%
US 0 0 3 3 6 0.00%
How can do in the SSRS matrix %(Completed/Total) percentage calculation ?
Is there anyway in SSRS 2008 to sort the Legend on a chart? Right now I am unsure as to how it is currently sorting. I see a property to Reverse the order, but I don't see anything to alphabetize it.
View 8 Replies View RelatedI have 2 datasets, dataseta is a list of tickets and their relevant owner and databsetb is a list of owners and a days worked first against them.I have a table with a detail grouping on ticketid and a normal grouping on owner which works well... all straight forward to this point. In this table on the owner grouping level I also have a lookup to datasetb which pulls back the days worked per owner which works fine as well. But what I now need to do is total the days worked over all owners, which sounds simple but doesn't work. This is the expression on the days worked for each owner -
=lookup (Fields!owner. Value, Fields!owner.Value, Fields!Days_worked.Value,"datasetb")
If I add a sum around this then it uses the figure above but multiplies it by the amount of tickets in the detail grouping.
Below is my navigation URL link ..I want the drill through to open in new tab rather than new window..I believe i need to change the newwin.
="javascript:void(window.open('"+ Globals!ReportServerUrl + "?" + Globals!ReportFolder + "%2fReportName&rs:Command=Render" +"&YQM='+escape('"+Parameters!YQM.Value.ToString() +"') +'&Status='+escape('"+Parameters!Status.Value.ToString()
+"') + '', 'newwin', 'screenX=0,left=0,screenY=0,top=0,status=1,menubar=1,resizable=1,scrollbars=1,toolbar=1,location=1'))"
I have a RS 2008 R2 SP3 Service in SharePoint Integrated Mode.
Since 5 days my Subscriptions were not sent anymore. I did no changes to these machines. There were some data driven subscriptions in pending state. I delete these entries via SharePoint.
When I look at Report server Execution Logs, there is no error, that i can associate to subscriptions. New Subscription are created and deleted in the Log, but they will never been processed.
I have done a Reboot to the RS Box but, that was not the solution.
I've got an SSRS 2008 report with 4 nested groups on rows. Report requirements are that each new group at each level have a subtotal. I've gotten this to work just fine. After the users saw the report, they had a new request - if the SubTotal has only 1 row to Subtotal, do not display the Subtotal. If there are 2 or more rows, display the Subtotal line.I know I can go to the Grouping Properties, and on the Visibility properties select the "Show or hide based on the expression" - I am struggling with the experssion. How can I check to see if there are more than one row at this group level? The query is SQL with 2 sub selects, and 7 tables in various join clauses.
View 15 Replies View RelatedI need to have a report that will have formulas in excel. I understand that the limited support for exporting excel formulas has been dropped in SSRS 2008. Is there any way to work around this and still output formulas?obvioulsy the way to do it in previous versions of SSRS are not working (using report items). I tried to add my formulas in my dataset (I can know which excel cells I need in the formulas) but they end up being displayed as text. I then have to get in the excel file and enter and exit each cell so that it "becomes" a formula.
View 11 Replies View RelatedHow to enable ADFS for SSRS 2008?
View 4 Replies View RelatedIs it possible to hide the entire toggle line and the symbol but still shows the children? I must keep the children in this container.
Before:
After:
I'm using SQL Server 2008 SP3 with Reporting Services 2008 SP3.
By opening my web application in IE9 and running report, i can print and show then print preview by clicking the "Print preview" button in printing dialog.
By opening my web application in IE11 and running report, i can print the report but if I click on the print preview on the print dialog nothing appears... Why?
I have a dataset in my report that pulls 10 fields. One of the tablixes on report should display only 8 of the 10 fields and this is causing the duplicate records to show up on the tablix.I tried hide duplicates option for the entire details row and have set the scope to "Details". It did not work. I am getting the data from a stored procedure and cannot do much on that.
View 7 Replies View RelatedVS 2008. I have the following set up. Group1, Group2, Group3 header, Group 3 detail rows..When I set the row visibility (hide based on Group2) on the Detail row, it still shows up when the report is originally rendered.
It should be: Group1 expanded, Group2 collapsed, Group3 header hidden and detail rows hidden
It is showing: Group1 expanded, Group2 collapsed, Group3 header hidden, Group3 detail row visible.
I never had this trouble in 2005. Is there something different about row visibility in 2008?
we need the list suppliers in a text box,if it were a parameter, we can do it by =join(parameters!Supplier_ID.Value,",")but if the Supplier Id is a field , join (Fields!Supplier_ID.Value,",") doesnt work!how to achieve this.
View 9 Replies View RelatedPresently I have a main report and subreport, with the subreport having values for a carbon copy contact, which when it is displayed it shows these values:
Peter Piper #Error #Error peterpiper@mycompany.com #Error
Donald Duck #Error #Error donaldduck@mycompany.com #Error
etc.
When I run the subreport directly, it correctly returns all the values:
Peter Piper 123-345-6789 Calgary peterpiper@mycompany.com T
Donald Duck 987-654-3210 Calgary donaldduck@mycompany.com F
Here are the details on SQL Server 2008:
Microsoft SQL Server 2008 (SP2) - 10.0.4064.0 (X64) Feb 25 2011 13:56:11 Copyright (c) 1988-2008 Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2)
why the #Error is showing up the the main report?
I've had a SSL wildcard certificate successfully in use, unless it had to be replaced because of its age. Now I've imported a new certificate, but unfortunately I'm unable to set it up in the SSRS Configuration Manager Console (Web Service URL / Report Manager URL), because "We were unable to create the certificate binding".
Here is the Error Message:
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 80070520
---> System.Runtime.InteropServices.COMException (0x80070520): A specified logon session does not exist. It may already have been terminated. (Exception from HRESULT: 0x80070520)
--- End of inner exception stack trace ---
I've also deleted the existing bond in the netsh console with "netsh>http delete sslcert ipport=0.0.0.0:443", but this still doesn't fix the issue.