Reporting Services :: Dataset Query Result Not Reflecting In The Report?
Nov 4, 2015
I'm using Report builder 3.0 to create a report. In the design, datatset query i have a sql to calculate difference between two dates (date1-date2) as processing time. I have this (processing time ) ONLY in my ORDER by clause and when i execute the statement it does exactly what i was looking for , however when i run the report the sort order is not delivered. I checked each column tablix properties and the sorting order is set for Processing Time.
So I have a report that uses an MDX query to fetch the main data for the tablix. Then I have a custom row added which pulls data in via a Lookup function and references a different dataset. The report has 3 parameters. Each dataset uses those 3 parameters in its underlying query. However, the dataset referenced in the lookup function doesnt seem to be updating when change the parameters and re-run the report.
I would like to display different addresses in the same list:
I have the query for married couples working, Also, I have a separate query of non-married people working.I would like to create a separate datasets for unmarried people in the same report.-Is there way to setup another the second data set without duplicating the fields from the first datasource. I tried to use alias on the second datasets and it did not work okay.
I have a dataset with rows that I normally would display in a table control. I have too many columns and I would like each data row to be display on many lines. How is that possible?
I have created multiple data sources and datasets in my SSrS project. I created the datasets so I could use them as the basis for reports. However, when I open the wizard to create a new report, I am always asked for a data source, and then have to renter the SQL code that I have stored in one of my datasets. How can I have a report use an existing dataset as it source of data? Otherwise, the datasets I created seem useless . . .
I have a report with 6 parameters..in that first 3 param having 23,000 values and last 3 are having 50 values each. If i see preview the report is coming fine and result is displayed properly. But, if i deploy the report in server and click the report ..then all parameters taking values but nothing is seen in report body ...its blank..
in any browser its blank.. atleast table structure also not displayed ..simply page blank.
I have used my parameter value in where clause of my dataset control SQL query. When I choose a single value in my multiple-value parameter then I get output as expected. Hovewer when I choose multuple values I get an arror:
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS. ---------------------------- Query execution failed for dataset 'DATABASE'. (rsErrorExecutingCommand) ---------------------------- An error has occurred during report processing. (rsProcessingAborted)
I am convinced that it's a syntax problem. Is there a way I can change syntax of data output from query:
select @parameter
I need output to be like: value, value, value ... etc.
The dataset control query looks something like the following:
select ID, a, b, c, d from DATASET.dbo.Table where ID in (select @parameter)
I have been searching through google for weeks to solve this and got this far and got stuck. Is it possible at all to achieve what I am looking for?
I have report which has 5 columns. User want to export report file in Excel format. when exported report then by default 2 columns will be hidden in excel and user can unhide columns after export in excel.I did column hide on report level and show in result set in excel sheet by using Global render format.
I have a report that prompts the user to select a parameter, for simplicity, let's say the parameter is for color choice, options are Red, Yellow, Blue or *. The * is for include all colors. I am passing that parameter back to the dataset query which, again for simplicity is
select Hue from AvailableColors whereColor = @ColorParam.
For a specific color this works fine, for the "*" selection it returns a null. It would seem that I need to convert the * to % but I am not sure how.....
When I click on the DataSet Query Desginer there is an Error Source:.NetSqlClient Data Provider. why this error comes and I have executed the SQL query in SSMS succesfully and the result comes. However this is causing the report from the report manager to fail.
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters.
I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
I found out the data I need for my SQL Report is already defined in a dynamic dataset on another web service. Is there a way to use web services to call another web service to get the dataset I need to generate a report? Examples would help if you have any, thanks for looking
I am creating a simple SSRS table report through Report Builder. My dataset is looking for the stored procedure . When I execute the Stored procedure through SSMS I get resutset for certain parameters. I execute the dataset (Store procedure) through query designer in dataset properties and I get results back. But when I try to run the report and see the preview, I do not get any results displayed. I been looking on the same issue form last 3-4 days and have not found any clue.
Following is the stored procedure I am using. Also I am passing multivalued parameter through report as well, and I am using spilt function to seperate the libraryid I am reading from parameter values. This works fine. I have similar kind of four other reports and with different stored procedure which exactly follow the same method , like multivalue parameters and other criteria are also very similar. All other reports works just fine.. This perticular report has issue for displying results, following is the stored procedure I am using
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
I have the SQL code for one of the select list columns as shown below in the SSRS Data set query level.
Example : Select IsNUll(max(ET.[# Utilizations by Utilization Method]),0) as [Employee Period Total]
SQL Result Set Output :
0 0 0
The above code when run in SQL displays correctly with zeroes if NULL values are available from the Source tables.Now at the SSRS Report level design I have grouped with more than one values.Even at the expression I have given =Fields!Employee_YTD_Total.Value but report output displays blank In order to evaluate 0 from the SQL result set I even tried equating the values to 0 like = Iif(Fields!Employee_YTD_Total.Value = 0 ,0,Fields!Employee_YTD_Total.Value) but still the report outputs is blank.
Issue/Query : Why it displays blank and I should have this as 0 in the report output to eliminate blank as this would be not appropriate to the end users to validate. What has to be changed either at the SSRS level or at the SQL level.
Trying to create a dataset for a report. I need to bring back percentage in the result set. The fields that I am using to get the percentage have valid data but the result field is 0.00%. Is there reason I cant bring back a percentage field?
Code: SELECT JobNum, Mailed, LT_7, BT_6_10, GT_10, Format([LT_7]/[Mailed], 'p') AS PctScaned1, Format([BT_6_10]/[Mailed], 'p') AS PctScaned2, Format([GT_10]/[Mailed], 'p') AS PctScaned3,
I need to display something like "Results x-y of z." The problem is, I can't figure out how to get the right value for z.I am using SqlDataAdapter and Fill()ing a DataSet with subset x through y of the result set. How can I get the right value for z?
I was wondering on a question that : exporting a report to xlsx is feature of SSRS server or of Report viewer control itself.I have multiple report servers (eg 2008 R2, 2012 and 2014) . I am using a windows application and reportviewer version 9.0.So when I use report server 2008 R2 its not showing the xlsx export option but working fine with other report servers.Again I changed the control to 11.0 (also 12.0) and checked the same scenario and same results with Reporting server 2008 R2 but working fine with 2012 and 2014. if its worth to change the Report Viewer control or just changing the server is okay to achieve the functionality of exporting to xlsx.
I am a beginner with Report Designer (and with Reporting Services). Following the tutorials 'Adding parameters to filter Reports ...' I tried using the @symbol to add a parameter to my query: where code = @code_value...I get the error: ORA -000936 missing expression (msorlib) Is there another syntax that I should use to define a parameter/variable in query for my oracle dataset?
I have a very frustrating problem. But given that this is a development forum, I'll keep that for my 'Envelope Lickers Rehab' and instead talk about an issue I'm having.
I have a very large query (line-wise) that executes in less than a minute when run from the SQL Management Studio as well as via Excel Services.
It is a stored procedure with one parameter. When I try to prime the designer with this query it gives me the following message:
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The statement has been terminated."
I've considered cracking open the xml source and manually creating the fields, but I'd rather not go there.
I am attempting to pass report parameters to my query. My report's data source is a WCF web service. I can run normal queries fine, but I have found that without the know-how to pass parameters to my query I am limited with my capabilities.
Assume a string parameter named "Name" with a specified default value of "Jmachol90", how would I pass that into the following query at the designated place:
=CountDistinct(IIF(Fields!Released_DT.Value = Fields!Date2.Value, Fields!Name.Value, Nothing)) Released_DT = a date - 09/03/2015 or 09/02/2015 Date2 = returns another date value in this case 09/03/2015
What I'm trying to do is: count distinct number of people (Fields!Name.Value) if the Relased_DT = Date2.My IIF statement is returning a zero value.
hi, i want to execute a finctionX() based on the returned resultset of SQLDataSource. For example, if the SELECT command returns nothing based on a specific search criteria then I want to execute functionX(). Currently, I have a string that displays "No Result" in the GridView in such case. How to catch the resultset of SQLDataSource? -nero
Currently, I want to get images of an item in my report for illustration purpose.
Below is my query to get image for item 'GL-10000' in the database. However, I would like to pass a parameter value, '@sItem', from my report so that it would get all related pics of items.
SQL Query:
Select top 1 item_picture_mst.picture from item_picture_mst where item_picture_mst.item in (select item_all.item from item_all where item_all.item = 'GL-10000') ORDER BY item_picture_mst.picture DESC;
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
I would like to have a parameter on my report to Select by Order_Taken_By. My attempt at that is here:
Dataset called OrderTaken:
select distinct SO_Header.Order_Taken_By from SO_Header Under the report Parameter Properties named @Order, under Available Values Selected "Get Values from a query"
I have DataSet: OrderTaken
Value Field: Order_Taken_By Label Field: Order_Taken_By
The values of the field Order_Taken_By is all text characters, no integer values.
Running the inital Query by itself yields results. When I add the parameter, I can make a selection, but now I get no results, even though there should be values for the choice I've chosen.
I am trying to figure out whether it is a possible or not to have a stored procedure that can return 2 dataset what I mean returning 2 selects and then manipulated within RS? If it's possible, can someone show me how?
The reason I am asking this due to have 2 return table view if you like that I manipulated each one of them differently and I rather do it one process instead of calling the same query for different view.
I am using RS 2005 and I am trying to figure out whether it is a possible or not to have a stored procedure that can return 2 dataset what I mean returning 2 selects and then manipulated within RS? If it's possible, can someone show me how?
The reason I am asking this due to have 2 return table view if you like that I manipulated each one of them differently and I rather do one query manipulation instead of calling the same query for different view.
I've seen questions similar to this posted, but I'm unable to find a clear answer to what I need to do.
We are currently using Crystal Reports, generating a dataset in our application and passing it to Crystal. Due to the many problems we have with Crystal we are now looking to move to Reporting Services 2005, but I can't find out how to pass it a dataset.
Although we do use SQL Server for data storage, we have many reports with calculations that are way too complicated to use calculated fields, and which change too often to want to store them in the database. One solution might be to store the data temporarily and regenerate it each time it's required, but this doesn't seem very elegant. So please could someone tell me if there is a way to do what I'm after and point me at a page that gives a nice clear explanation.
I use transact sql and a cursor in the dataset of my reporting services report. There is no error on the dataset but i can't add the dataset fields in the layout section (Visual studio business intelligence).
My dataset request :
-- Variable contenant le nom de la Base de Données
DECLARE @name nvarchar(50),
@DB1 nvarchar(50),
@DB2 nvarchar(50),
@DB3 nvarchar(50),
@RQT nvarchar(4000)
-- déclaration du curseur contenant le DataSet avec l'ensemble des DB
DECLARE DB_cursor SCROLL CURSOR FOR
-- RQT -> récupération du nom des DB selon un filtre (WHERE)
SELECT name
FROM master.dbo.sysdatabases
WHERE name LIKE 'SHP_CONTENT%' -- BDs de contenu SHP
ORDER BY name
-- Ouverture du curseur
OPEN DB_cursor
-- Récupération du premier élément du curseur
FETCH NEXT FROM DB_cursor INTO @name
-- Récupération des données des différentes BD
WHILE @@FETCH_STATUS = 0 BEGIN
-- création du nom des tables
SET @DB1 = @name + '.dbo.' + 'Sites'
SET @DB2 = @name + '.dbo.' + 'UserInfo'
SET @DB3 = @name + '.dbo.' + 'Webs'
-- LISTE DES GESTIONNAIRES
SET @RQT = 'SELECT Distinct(Webs.SiteID),UserInfo.tp_login,UserInfo.tp_Title, UserInfo.tp_Email,
