i hav four cells that display
startdate       | %completed|   taskname    | indicator
[startdate value]|[%completed]|[taskname value]|[indicatorfield value]
task name and indicator are grouped by years and months
i want all these in a single cell with a separator.
I have a cell in one of my reports that displays both a begin time and an end time. The problem is that the times are stored in military time and I need to display them in AM/PM format.
Currently I am doing the following:
CASE
WHEN DATEPART(HH, start_time) < 13 THEN RIGHT(CAST(100 + DATEPART(HH, start_time) AS CHAR(3)), 2)
ELSE CAST(DATEPART(HH, start_time) - 12 AS CHAR(2)) END + ':' + RIGHT(CAST(100 + DATEPART(MI, start_time) AS CHAR(3)), 2) +
CASE
WHEN DATEPART(HH, start_time) < 13 THEN ' AM' ELSE ' PM'
END
+ ' - ' +
CASE
WHEN DATEPART(HH, end_time) < 13 THEN RIGHT(CAST(100 + DATEPART(HH, end_time) AS CHAR(3)), 2)
ELSE CAST(DATEPART(HH, end_time) - 12 AS CHAR(2)) END + ':' + RIGHT(CAST(100 + DATEPART(MI, end_time) AS CHAR(3)), 2) +
CASE
WHEN DATEPART(HH, end_time) < 13 THEN ' AM' ELSE ' PM' END AS 'TIMES',
in order to present the two times in one cell in AM/PM format. While this works, I'm wondering if there is a way in Reporting Services layout mode to give a date or time format mode to a cell that will work for two times with a dash in between them, rather than simply for one time. Then I could pull the times in the format that they are stored on the database and use Reporting Services to format them. Does anyone have any suggestions?
Hi,
I'm working with MRS and I've got a table with a lot of entries. For each value in the table I'm trying to get the text colour to be set to 'red' when the value of the cell is less than 0. Otherwise remain black.
I can do this by setting the colour property cell by cell. But I have a lot of cells in the table. Is there a way to set the statement to apply to ALL cells in the table?
Basically I'm asking if there is a way to set the property in bulk instead of going through tediously cell by cell.
Any help would be much appreciated. Thanks!
I would like to display a portion of report where there is data or no data
There is data subreport  display  Â
   Product Name Latex Gloves Â
   Product ID   Â
xxxx5678
 There NO data in the subReport
Â
  Product Name             Â
  Product ID  Â
Is it possible to format a single cell with many lines of data. For instance, if I wanted to list an entire address in one cell like this:
123 Main St.
Apt. 1
Austin, TX 78759
Would that be possible through some kind of special formatting? Maybe with <br /> or something like that?
 I have created an SSIS package which processes daily financial information to a sql server database.  These processes are to be outputted to excel spreadsheets to a readable report format for management to review.  Some of these reports are laid out in a way that is not just tabular output but requires customized placement of data on an excel spreadsheet to specific cells. Â
I am able to place an initial resultset of a query output from the database in a tabular excel template through SSIS but the issue is at the end of that placement in the spreadsheet I am required to place another output below that tabular output in a different format from the initial output which I have shown below.
I have a database that yield 50 different reason codes
=Fields!Reasons_Type.Value
Each reasons code yields a total
i.e.
Appeal 4
Loss 5
Won 0
How can I display all 50 rows of data regardless if there is a total value.
I want a ssrs report with two tables adjacent,using same data set. I want to start row number/records in second table where rownumber of first table ends.and in second page first table should start where second table of first page ends.
View 10 Replies View RelatedMy stored procedure give me top 3 activities. My SSRS report design, I am able to display first activity when I select the Activity field from the Stored procedure, how to display 3 activities for each category.. Also I need a solution to sort the categories based on the requirement below.
View 2 Replies View RelatedHow can I merge two cells in the same column?Â
example   Â
ColmAAAA
cell001
cell002
I want to merge cell001 and cell002Â
I am trying to split cells that are merged as part of a grouped report. Am using the right-button menu and pressing "Split Cells" when it appears but it just splits into two parts and not into single cells or rows. When I right-button on one of the parts that came out of the split, I do not get a "Split Cells" to break it down further. Want to be able to split the grouped cells into individual cells or rows and have the rows be different colors. How can I do this?
View 4 Replies View Relatedi have a ssrs report in which i have creating rows with heading of months name from jan to dec i.e. jan|feb|mar|apr|....i have a parameter start date.i want when i enter start date from march supoose i enter date 03/22/2015 then display months from mar to dec.
View 5 Replies View RelatedI have to display the data in the below said formats..Current sample Data in the table and the data type is numeric(23,10)
50.00
0.50
0.00
0.00
To be displayed in the below format
1.25
0.75
0
0
1
I have to map this column in teh report and should dipslay like above.I think if 0.00 is available then it should display as 0..If 1.0 is available then it should display 1.Any value that has postive number after the decimal should display all the values  example : 2.25,3.75,5.06, So in general the solution to display values like 1.75,1,0 we should not dispaly 0 as 0.00 and 1 as 1.00 and 2 as 2.00 and so on...Any Solutions in terms of SQL query  or SSRS expression.
I am new to ssrs super scripts. I want to display superscript as B with bold & red colour for one column data
o/p:
Name:
America B
India B
UAE B
Here B is super script & red color....
i have to to combine two dataset in single matrix my sample scenario in below attached for reference.
in this first matrix values from one server and second one is another one server.
how to connect these to for getting desired result of thrid matirx.
in this 1,2,3,4,5,6 is in column grouping
how to solve this in using LOOKUP or CUSTOM CODE
I have 3 columns and here are 2 possible ways:
1. In all of them are values
2. Only col1 keeps value (col2 and col3 NULL)
For now It looks like:
| col1 | col2 | col3 |
----------------------
| val1 | | |
| val2 | val3 | val4 |
| val5 | val6 | val7 |
| val8 | | |
It should be like this:
| col1 | col2 | col3 |
----------------------
| val1 | -- merged cells, because col2 and col3 empty
| val2 | val3 | val4 |
| val5 | val6 | val7 |
| val8 | -- merged cells, because col2 and col3 empty
If I need to create groups (I've tried row/column grouping, but really unsuccessfully, far away from what I need).
As I think I need to write expression something like:
IFF(col2 & col3 = NULL) MERGE(col1, col2, col3)
Just I can't get success with expression's structure.
Is that possible to merge adjacent cells conditionally in SSRS 2008?
For Example
Col AÂ ColB
Col C ColD ColE ColF
If condtion is true
ColC and Col DÂ to be under Col A and ColE and Colf to be under Col B
Or Col C to be under Col ColA and Cold to ColF to be undercol B
I am new in SSRS 2012.I have created a rdl,in this rdl, am having a row group.In this report, other two columns has multiple rows and some rows having data and some other rows doesn't have data.So I want to create rows when the row of that particular column has any data or need to merge vertically with the row having data and row don't have data of particular column along with the Common Row Group Data
View 5 Replies View RelatedHopefully, someone has figured this out:
I've implemented and tested cell level security on the cube. It's testing certain level conditions, and returns #N/A (as normal) when the user is not supposed to see the cell value. Since I always use .FormattedValue in my reports, works fine in Report Services (and Excel and ProClarity, etc.)
Here's the problem:
When RS parameters encounter this situation, the parameter dataset "breaks" (The following system error occurred: Type mismatch.) This is happening, because the parameter fields (ParameterValue, ParameterCaption, ParameterLevel) are being replaced by #N/A, due to the cell level security. This is happening, because these are actually defined as members, and hence passing through cell level security.
What I need to do is find a way to have these specific members bypass the cell level security, so that the parameter datasets still work. (Failing that, a new way of specifying parameters in MSRS.)
I've tried the following a a cell level security rule, but it doesn't seem to work:
[Measures].CurrentMember is [Measures].[ParameterValue] or [Measures].CurrentMember is [Measures].[ParameterCaption] or
[Measures].CurrentMember is [Measures].[ParameterLevel] or
[Measures].[Is Visible]
Any ideas?
Hi,
I€™ve build a report in reporting services 2005, based on a MOLAP cube (Analysis Services 2005). In the cube I€™ve enabled drillthrough.
I know that we can define drillthrough in the report by clicking on one of the members of the dimension hierarchy, but that€™s not what I want. I want to be able to drillthrough on a cell. Is there any way how to do that in Reporting Services 2005?
Thanks,Abdel
Hi all
I have two cells,having first cell 0 and other cell 5.
How can i add these two cell values.
I used following expression
=Fields!LITMIN.Value + Fields!NUMMIN.Value
But i am getting Concatenated result ie:05
But i need 5.
How can i do it.Pls help me
I have a report with 3 groups, and a toggle on the first cell in the group header, and group totals on that line also. So it renders as:
- Group 1 G1Total G1Total G1Total
- Group 2 G2Total G2Total G2Total
- Group 3 G3Total G3Total G3Total
Detail DAmt DAmt DAmt
I would like to save some space and render more like
- Group 1 G1Total G1Total G1Total
- Group 2 G2Total G2Total G2Total
- Group 3 G3Total G3Total G3Total
Detail DAmt DAmt DAmt
I haven't been able to find a way to have the first group cells overlap each other. Is there a way to do that and am I missing something obvious?
I have the following result set that I am putting into a SSRS 2012 Matrix:
RowNum RowLabel Val Title
1.00 Advance 10000.0000 TestTitle1
4.00 List Price 18.0000 TestTitle1
5.00 Units Shipped 20000 TestTitle1
6.00 Return Units -8125 TestTitle1
7.00 Net Sales Units 11875 TestTitle1
8.00 Return %Â 45.0%/10.0%Â TestTitle1
*Note: The data in Val for 'Return %' is a text field - informational only and necessary.
When setting it up such that the Columns are Title, and the Rows are RowLabel, I get the following:
TestTitle1
I am trying to create an SSRS report to display a single row of Household information (from CRM Dynamics) Household being the Parent Entity, with 1:N relationship with Contact Entity.
How would I go about showing all the Firstnames (from Contact) in the same cell like the below?
on this report, am having ids separated by '^'.when I export to excel, I wrote the expression as
=Replace(Fields!Id.Value,"^",Environment.NewLine)
It is working fine, but the problem is if I have only one id in some scenario, then this case that cell is showing an error "The Number in this cell formatted as text or precedence by apostrophe" .But in other scenario,If the ids are separated by "^", then this case that cell wont show any error. So I need to display the cell wont have any error symbol  if I have only one id .How can I achieve this?.
I have an SSRS report with groups that when exported to excel contains drill-in's (plus marks on left side). The issue I have is that for all the groups in the drill-in, those cells become merged. I want to keep the group drill-in but have the cells UNMERGED. I have heard this can be done with the RDL XML but I don't know what to modify to accomplish this.Â
View 4 Replies View RelatedI have a table with only one column as
Emp_Name
A
B
C
D
E
I want to display this data as
Emp_Name
A, B, C, D, E
Is this possible? I am using SQL server 2005.
Any help is appreciated.
Regards,
Vinesh
I am using VS 2010 and the SSRS that came with it. I am sure its SSRS 2008. Anyway, I added a report file to the project, added an ObjectDataSource and connected this to SQLServer 2008, and display the dataset on the report. The report is using ScriptManager, ReportViewer1, and Report1.rdlc file. I preview the dataset and I have multiple row returned. The problem is I only have one row displayed on the report. Maybe I did a quick and dirty report? What setting of properties did I missed?
View 8 Replies View Related
I have a file directory of tiff images that I need to display dynamically with reporting services. I receive the following error message: "The value of the MIMEType property for the image €˜image1€™ is €œimage/tiff€?, which is not a valid MIMEType." After looking it up sure enough tiff is not a valide type. Does anyone know of a way to display tiff images in reporting services.
Thanks,
Ross
I have Successfully deployed the report in Report Server.
And i also successfully called it from Web application using VS 2005.
But the problem is,I am able to view only half of the report in Web Browser.It was Shrinked to Left side of the browser.
I am getting total report when i browse from Report Server URL directly.
Any body pls help me to solve this.
I have a report where in I want to show each record on a separate page.
So, to achieve that I took a single cell from table control, expanded it and used all the controls in that single cell. This looks nice so far.
Now, I also have to show a sub grid on each record. So I took a table control and added on the same single cell and tried to add a parent group to the table row.
When I preview, it throws this error.
"The tablix has a detail member with inner members. Detail members can only contain static inner members."
What am I doing wrong? How can I achieve table grouping inside a table cell?
I have a report created in Business Intelligence Project.I want to trigger my report result. If it has no returned value, it creates error message displayed on the screen. How could I do this?
Any guidance please.
thanks
-Ron-
I have created a table and want to display a datset. One of the fields in the dataset is 'month' which I need displayed across the top of the report. The other information should make up the rows.
How do I get it to list the Month across the page rather than down?