Hi all
I have two cells,having first cell 0 and other cell 5.
How can i add these two cell values.
I used following expression
=Fields!LITMIN.Value + Fields!NUMMIN.Value
But i am getting Concatenated result ie:05
But i need 5.
How can i do it.Pls help me
Hi all
I want to show two values in one cell.is it possible.
I need to display number and percentage in one cell
Like ---- Number and percentage in Brakets.
10 (20%)
How can i do it?
Pls help me
I have a report where in I want to show each record on a separate page.
So, to achieve that I took a single cell from table control, expanded it and used all the controls in that single cell. This looks nice so far.
Now, I also have to show a sub grid on each record. So I took a table control and added on the same single cell and tried to add a parent group to the table row.
When I preview, it throws this error.
"The tablix has a detail member with inner members. Detail members can only contain static inner members."
What am I doing wrong? How can I achieve table grouping inside a table cell?
Hopefully, someone has figured this out:
I've implemented and tested cell level security on the cube. It's testing certain level conditions, and returns #N/A (as normal) when the user is not supposed to see the cell value. Since I always use .FormattedValue in my reports, works fine in Report Services (and Excel and ProClarity, etc.)
Here's the problem:
When RS parameters encounter this situation, the parameter dataset "breaks" (The following system error occurred: Type mismatch.) This is happening, because the parameter fields (ParameterValue, ParameterCaption, ParameterLevel) are being replaced by #N/A, due to the cell level security. This is happening, because these are actually defined as members, and hence passing through cell level security.
What I need to do is find a way to have these specific members bypass the cell level security, so that the parameter datasets still work. (Failing that, a new way of specifying parameters in MSRS.)
I've tried the following a a cell level security rule, but it doesn't seem to work:
[Measures].CurrentMember is [Measures].[ParameterValue] or [Measures].CurrentMember is [Measures].[ParameterCaption] or
[Measures].CurrentMember is [Measures].[ParameterLevel] or
[Measures].[Is Visible]
Any ideas?
Hi,
I€™ve build a report in reporting services 2005, based on a MOLAP cube (Analysis Services 2005). In the cube I€™ve enabled drillthrough.
I know that we can define drillthrough in the report by clicking on one of the members of the dimension hierarchy, but that€™s not what I want. I want to be able to drillthrough on a cell. Is there any way how to do that in Reporting Services 2005?
Thanks,Abdel
I have a cell in one of my reports that displays both a begin time and an end time. The problem is that the times are stored in military time and I need to display them in AM/PM format.
Currently I am doing the following:
CASE
WHEN DATEPART(HH, start_time) < 13 THEN RIGHT(CAST(100 + DATEPART(HH, start_time) AS CHAR(3)), 2)
ELSE CAST(DATEPART(HH, start_time) - 12 AS CHAR(2)) END + ':' + RIGHT(CAST(100 + DATEPART(MI, start_time) AS CHAR(3)), 2) +
CASE
WHEN DATEPART(HH, start_time) < 13 THEN ' AM' ELSE ' PM'
END
+ ' - ' +
CASE
WHEN DATEPART(HH, end_time) < 13 THEN RIGHT(CAST(100 + DATEPART(HH, end_time) AS CHAR(3)), 2)
ELSE CAST(DATEPART(HH, end_time) - 12 AS CHAR(2)) END + ':' + RIGHT(CAST(100 + DATEPART(MI, end_time) AS CHAR(3)), 2) +
CASE
WHEN DATEPART(HH, end_time) < 13 THEN ' AM' ELSE ' PM' END AS 'TIMES',
in order to present the two times in one cell in AM/PM format. While this works, I'm wondering if there is a way in Reporting Services layout mode to give a date or time format mode to a cell that will work for two times with a dash in between them, rather than simply for one time. Then I could pull the times in the format that they are stored on the database and use Reporting Services to format them. Does anyone have any suggestions?
I am converting a site from asp to .net and the previus writer did something I never saw.(I am somewhat new to programming all together). He put multiple values in a single cell of the database. I have always learned to use a seperate column for each value.
Is this a classic asp thing and there are better ways now? Or is this something I should do myself? The columns type is text and the contents look like this:<Details Expertise="bla bla" Description="We are a three-divisional company ...," WebSite="www.blabla.com" AccountLevel="Free" AccountStatus="Active" WorkHomeZIP="22222" ContractStartDate="01/01/2003" ContractEndDate="12/31/2003"><Address Location="Work" State="Oh" ZIP="22222"/><Email Location="Work" Value=""/><Phone Location="Fax" Code="9801" Ext=""/></Details>
i hav four cells that display
startdate       | %completed|   taskname    | indicator
[startdate value]|[%completed]|[taskname value]|[indicatorfield value]
task name and indicator are grouped by years and months
i want all these in a single cell with a separator.
Is it possible to format a single cell with many lines of data. For instance, if I wanted to list an entire address in one cell like this:
123 Main St.
Apt. 1
Austin, TX 78759
Would that be possible through some kind of special formatting? Maybe with <br /> or something like that?
I have the following result set that I am putting into a SSRS 2012 Matrix:
RowNum RowLabel Val Title
1.00 Advance 10000.0000 TestTitle1
4.00 List Price 18.0000 TestTitle1
5.00 Units Shipped 20000 TestTitle1
6.00 Return Units -8125 TestTitle1
7.00 Net Sales Units 11875 TestTitle1
8.00 Return %Â 45.0%/10.0%Â TestTitle1
*Note: The data in Val for 'Return %' is a text field - informational only and necessary.
When setting it up such that the Columns are Title, and the Rows are RowLabel, I get the following:
TestTitle1
I am trying to create an SSRS report to display a single row of Household information (from CRM Dynamics) Household being the Parent Entity, with 1:N relationship with Contact Entity.
How would I go about showing all the Firstnames (from Contact) in the same cell like the below?
on this report, am having ids separated by '^'.when I export to excel, I wrote the expression as
=Replace(Fields!Id.Value,"^",Environment.NewLine)
It is working fine, but the problem is if I have only one id in some scenario, then this case that cell is showing an error "The Number in this cell formatted as text or precedence by apostrophe" .But in other scenario,If the ids are separated by "^", then this case that cell wont show any error. So I need to display the cell wont have any error symbol  if I have only one id .How can I achieve this?.
What would be an equivalent expression for ISNULL(datafield, 0) for a table/matrix cell? I am using iif( Len().. to find out if there is something in the cell, and displaying zero in the cell if the length of cell item is 0, however am wondering if there is any better/elegant way of doing that?
I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA :  abc,cde,efg  Â
ColumnB : cde,xyz,abc  Â
the result in  Â
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies View Related
Hi,
I'm working with MRS and I've got a table with a lot of entries. For each value in the table I'm trying to get the text colour to be set to 'red' when the value of the cell is less than 0. Otherwise remain black.
I can do this by setting the colour property cell by cell. But I have a lot of cells in the table. Is there a way to set the statement to apply to ALL cells in the table?
Basically I'm asking if there is a way to set the property in bulk instead of going through tediously cell by cell.
Any help would be much appreciated. Thanks!
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red  - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red  - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
          red   blue  green
  pen       2    0    1
  marker    0    1    0
  pencil      1    3    0
  highlighter  1    1    1Â
We tried Sum but not able to display in single row.
The data source is Fetch XML - so all the values are string.I need to sum the values but getting an error:
Warning  1      [rsAggregateOfNonNumericData] The Value expression for the textrun ‘Textbox25.Paragraphs[0].TextRuns[0]’ uses a numeric aggregate function on data that is not numeric.  Numeric aggregate functions (Sum, Avg, StDev, Var, StDevP, and VarP) can only aggregate numeric data.I tried converting it to INT but it returns a large number which does not match what I'm expecting.
I have row group created here on Due Month & Sales Region & added total after Due Month. When a user clicks on particular amount I would like to send the Sales Region value to the new report as Parameter. So Instead of Total text , I would like to have all the sales regions concatenated and sent to the new report. writing an expression to get the report parameter? I have added the picture of how I want the values to be concatenated , instead of Total . Is this not possible in SSRS?
View 5 Replies View RelatedI have an ssrs (report builder) with 2 dataset. the first dataset is a summary if records which the report has a column name qty and i put also a total qty summary in the last rows. the second dataset is a raw data and have a column name qty, also i put a total qty summary in the last row. The requirements is to be able to evaluate or check the total qty under dataset1 from total qty of dataset2 if equal else if not equal i have to make the font as red so that the user will inform that the total qty has a discrepancy. the users will validate from raw data which are the one items that have a missing qty. How to work on this or is this appilcable in report builder.
View 4 Replies View Related@partno is defined a multivalue parameter.when I enter a single part number or leave it empty data is properly returned.when I enter multiple part numbers data is not returned. I have tried: 604-02394, 604-03492 in the parameter prompt.I have tried entering those parts on separate lines in the parameter prompt:
604-02394
604-03492
my sql query : and (fpartno in (@Partno) or '' in (@Partno))...I only want to see those two parts in the report.
I using TOP N filter in my report to fetch top 20 Projects as per expense done.
Expression- Project_name
Operator- TOP N
value- 20
However it is not fetching the correct values. It is giving me 20 records but those are not the TOP 20.
It is missing few values from between.
I want to round 0.356 to 1? How can i do a round up in SSRS reporting services.Â
I am using this code:
The Sum of the Price_Call here is  0,3965 ---> I want to round it to one!
= Round (   Sum(Fields!Price_Call.Value), MidpointRounding.AwayFromZero  ) --- > This is always giving me 0
I am using SQL server 2012 and Report builder 3.0 to build my report. I have build a report which product the following table
What I try to achieve is to add 2 calculated field at the bottom of the table which will represent 2 Total value based on a condition
OutTotal field should show the SUM of the Quantity only for ItemStatus=0
InTotal field should show the SUM of the Quantity only for ItemStatus=1
IMPORTANT : I cannot group my data because I need to shown them in a time Wise flow
I have try to insert the first field and define an expression but it gives an #Error. The expression I used is as below
=SUM(IIF(Fields!ItemStatus.Value = 0, Fields!ItemQuantity.Value*Fields!ItemUnitWeight.Value,0))
Â
The Quantity filed in my table is calculated from expression Fields!ItemQuantity.Value*Fields!ItemUnitWeight.Value
I have a bubble map which contains negative values for the data field.
If I Preview a bubble map report within Visual Studio, I can get the expected result.
However, once I deploy this report I cannot get any data back from the report (see screenshot below)
Once Deployed and viewed in IE:
Why this is occurring?
Also, the data field options in the Layer Wizard are SUM and COUNT. Can these be changed?
Data
10 13 15 3 26
10 13 20 35 29
10 13 5 26 2
10 15 27 34 33
Query
Declare @num1 char(5)
Set @num1 = (SELECT ltrim(Substring(ltrim(number2), 8, CHARINDEX(' ', ltrim(number2)))) FROM Num2played)
SELECT @num1 FROM Num2played
Error
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Any suggestions or fix?
Thank you.
=========================================
The data above is in one colum. I would like to rearange the
numbers in order. e.g. from "10 13 15 3 26" to "3 10 13 15 26".
I'm building a report that has a column in the table called countries of origin, that column can contain data like "USA","China" ( normal countries) but some rows can also contain "USA, China, Australia" ( multiple counties in one row).
I'm trying to build a filter to filter my results :
-I have a data set created with a list of all world countries
-I've Build a Parameter containing a drop down list with all countries
--- My problem is when I want to create the filter in my main data set , I can so it , but when I search for example for "USA" , I don't get the lines where there are multiple countries and "USA" is one of them...
There must be an expression in the filter that will be able to search through all the values in the string and return me my correct results.
I am having SQL query which has inner join table from another Database. The below highlighted query shows its values.
/*Trend and Capacity Report*/
SELECT MEA.DisplayName AS Cloud, MEB.DisplayName AS VM, OS.PropertyValue AS OS, CONVERT(varchar(17),PD.DateTime,113) AS Date,Â
VM3.VirtualCPUCount AS VCPU
FROM Perf.vPerfDaily AS PD
INNER JOIN vPerformanceRuleInstance AS PRI ON PD.PerformanceRuleInstanceRowId = PRI.PerformanceRuleInstanceRowId
INNER JOIN vPerformanceRule AS PR ON PRI.RuleRowId = PR.RuleRowIdÂ
[code]....
My request is to calculate total capacity of all available Virtual CPUs, Memory and Storage from 4 separate clouds: Â 'cloud1','cloud2','cloud3','cloud4'
Whenever I select =Sum(Fields!VCPU.Value) expression in Report Properties and assign it to a variable and assign that variable to a Text Box field I get the value as VCPU * (Number of VMs) which is not correct.
I am looking to get the value of VCPU from all 4 clouds above.
I am using 2 charts in my SSRS Report. Requirement is to load the Right side chart based on the click event from left chart.
I can achieve it using go to report option. But the issue is total page getting refreshed while using this option. I feel bookmark option will be the best. But I don't think I can pass a value to Bookmarks.
I have a table that contains some data.Â
LabelName
LabelValue
TotalForRetire
10337
dummy1
0
TotalForRelatives
5850
dummy2
0
TotalForDisability
7337
TotalForOrange
23
I have a pie chart and a bar chart.
In the pie chart I want to plot only TotalForRetire and TotalForDisability and TotalForOrange
In the bar chart I want to plot only TotalForRetire,dummy1,TotalForRelatives.
Also, here I want the horizontal axis not to show the label  for dummy1 as the value is 0. How can i do that for each chart?
I am trying to build a report using SSRS.I need to retrieve a distinct value from my initial query and place this in the header or group row.The detail lines are hidden but may be expanded(shown).I then have another group row in which I require the sum of all distinct values from my previous group row.To explain pictorially I have the following:
-Scroll right to see the pink squares.Note that the total in the pink square is the sum of the individual var3 values distinct so 10 even when var3 =4 in euro currency.
-I have tried using sum(var5) but this will give the incorrect value as it sums all detail lines not just the distinct values.
-I have tried using another dataset but when referenced the grouping behaviour expected is non existent so where I expect 40 I get 80 i.e. sum disregarding values of var1 and var2 although these are the grouping variables.
-I need it to be dynamic so I am unable to use IIF(...).
If I could get var4 or var6 to be the totals I require I could work with that.I have also tried the following custom code:
Dim public unitLimit as Double
Public Function Getcpvalue(ByVal limit_amount1 AS Double) AS Double
unitLimit = unitLimit+ limit_amount1
return limit_amount1
End Function
[code]...
I am new to SSRS. I created a reporting services with 3 groups. I would like to know how to create different colors for each group so that all my values displayed by color group ?.
View 4 Replies View RelatedI have 2 datasets, dataseta is a list of tickets and their relevant owner and databsetb is a list of owners and a days worked first against them.I have a table with a detail grouping on ticketid and a normal grouping on owner which works well... all straight forward to this point. In this table on the owner grouping level I also have a lookup to datasetb which pulls back the days worked per owner which works fine as well. But what I now need to do is total the days worked over all owners, which sounds simple but doesn't work. This is the expression on the days worked for each owner -
=lookup (Fields!owner. Value, Fields!owner.Value, Fields!Days_worked.Value,"datasetb")
If I add a sum around this then it uses the figure above but multiplies it by the amount of tickets in the detail grouping.