If I stop and start SQLAgent and SQMail the job works fine.
SQLAgent and SQLMail are running under a valid domain account. When I test the MAPI profile(via Enterprise manager) in SQLAgent and SQLMail I get no errors.
I have checked the event log and the SQL error log and have found no errors.
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
I'm working on SSIS Package, I messing with one problem. I have a sequence container as a parent & it has 4 data flow task. In that data flow task data is ETL in another database server. According to my requirement, if any of the task is failed then i have to send a mail to the concern person describe the cause of failure. Currently i'm doing this by event handler onerror condition. but for one error it sending 4 mail. becuase for one error it's giving 4 error message. i had used another alternative, on failure of task i connect it to another task that sending mail. but it works only when i use logical OR. But i'm not getting whether it's a correct method or not.
When I am execute the SSIS packages in my machine, it is working fine,
The SSIS package contains Send Mail task, but if the same application is executed by my colleague,
he is getting the error "Failure Sending mail", but he was able to execute the same application successfully previouly. but he can able to send the mail from his outlook.
The send mail task in ssis was failing with following error
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
The firewall for SMTP server was opened.
And successful in sending mail using Database Mail task from the sql server
Do any one have idea why this difference is? Do any one ever faced similar issue?
One reason I could found is McAfee virus scan policy is stopping the SSIS Send mail task.
(source: 9/25/2007 9:00:04 AM Blocked by port blocking rule C:Program FilesMicrosoft SQL Server90DTSinnDtsDebugHost.exe Anti-virus Standard Protection : Prevent mass mailing worms from sending mail 10.237.5.105:25)
What happens if any of the extended stored procs below can't connect to the Exchange server? Is the failure logged? Does it back off and try again later?
i have a package that contains a foreach loop container, in this container i have sql tasks, and execute package tasks, that end with a send mail task. if there something wrong with the smtp server, or it's down, the send mail task fails the package. i don't want this to happen, what i want that if the send mail taks fails, the package will continue it's execution.
--i thought of using the event handler... but i don't know if it works...
I have multiple task flows with precedence constraints and i have changed the constraint as completion to execute the package even though there is failure in one of the tasks in the package but every time the send mail success is executed instead of Send mail Failure task.
When using a subscription to send mail, I find that the report can be sent in any format apart from Excel, which gives me the error: "Failure sending mail: Unspecified error". As you can imagine, this doesn't give me much to go on!
I want to use Excel format as it retains the drilldown functionality (hiding / unhiding rows). The ExecutionLog has the status as rsSuccess, but Subscription tab for the report shows the error.
I have SQL Server Reporting services on Windows 2000.
The reports seem to be working well, but I cannot get a subscription to work. The error I get is the one in the subject line.
I look into my log files and see these lines.
ReportingServicesService!emailextension!ab0!12/07/2007-15:02:07:: Error sending email. Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> System.Runtime.InteropServices.COMException (0x80090005): Bad Data.
More and more often, I am seeing this error message in RS subscriptions. I would assume it means the IIS server can't connect to the corporate exchange server. However I was wondering if there is some timeout setting/configuration in RS or the IIS server (or any other kind of setting) I can change to help alleviate this problem.
Has anyone else experienced this? Or know how to fix it?
Thanks,
Jeff
UPDATE: After looking closer at the subscriptions, I have noticed that subscriptions set up by a RS Admin (who is also a server admin) seem to be working fine. It is the subscriptions that are set up by ordinary users that are failing...
I am Getting this error in SSRS Report Subscription. I went to Subscription table Checked the Laststatus. The LastStatus is :Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will not be resent.
I am new to asp.net 2.0, although I have some experience with asp.net 1.1. In my new machine I have VS 2005, SQL Server 2000 and Sql Server 2005 installed. I wanted to connect to a database in SqlServer 2000 from a simple asp.net 2.0 project. I used the following connection string: string strConn = "Data Source=xyz/abc;Initial Catalog=dbname;UID=abc;PWD=efg;"; xyz/abc is the name displyed in the enterprise manager, under SQLServer Group. When I run the app, I am getting the following error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) The error indicates that it is trying to connect to SQL Server 2005, although my xyz/abc is a SqlServer 2000 instance. Not sure how to force the connection to the SqlServer 2000 database. Thanks
Hello Everyone and thanks for your help in advance. I have set up a new installation of SQL Server 2005 and VS 2005. I am trying to get some web applications up and working, but am experiencing problems with the database connection. I am tring to use the the sa account to connect, but am receiving the error "Login for user 'sa' failed. Not associated with at trusted account...". I am familiar with this error and have made sure that the SQL Server is using SQL Server and Windows Authentication Mode. The connection string I am passing to it is: server=(local);uid=sa;pwd=password;database=Northwind which I believe is correct. So I'm confused as to what the problem is. Any help on this topic would be greatly appreciated. Thanks.
I am running sql server 7, since friday my users are not unable to access their database on the server. NT group authentication is the mode of accessing the data on the server, the temporary soluton I have found so far is to create individual login. Which means creating login for every user on the network. NT4 Group membership that has always worked no longer functions.
Hi experts, my server was having windows as well as sql login authentication. Once i checked the deny access for BUILTAdministrators . . I'am unable to login as SA and also I'am also unable to change that check as well. . .any solutions in this regard will be appreciated
Hello , this is my first posting in this group.I am running SQL server 2000 on my windows 2000 server box. I use itfor my Siebel database.When ever I launch Query Analyzer and chose SQL Server AuthenticationI get the error message below:[Microsoft][ODBC SQL Server driver][SQL Server]Login failure "SA" Not associated with a trusted SQL serverconnection.The funny thing is that if I use Windows Authentication the loginworks.I checked Enterprise Manager and the SA account is present.Any help appreciated .SQL newbieThanks.
There have been other similar posts, but this is my issue: I have set up database mirroring with a witness, and failover works properly. I have also installed the login id's and their original SID's onto the mirror server. When I run a Reporting Services report against the primary database, it runs properly. When I failover to the mirror server and run the report again, I get a "login failed for user" error. As I have already said, the SQL login that the Reporting Services report uses was installed on the mirror server with the original SID. Any ideas as to what else might be wrong?
I have the default instance of sql server (2005 express) installed on my machine. I can log on with no problems using the windows authentication but I had to create a new login account with a username and password.
I have added the new user using the Management Studio under the Security>Logins folder. I have assigned this new user has a server role of sysadmin and I have mapped the user as the db_owner of each current database on the server (default system db's). When I try to connect to this server (keeping in mind it works fine with the windows account) using sql server Authentication and the new username and password, I get an error that says "Login failed for user 'WblsUser'. The user is not associated with a trusted SQL Server connection. (.Net SqlClient Data Provider)"
There seem to be lots of posts regarding this issue but I was surprised that it should happen when you use the management studio as apposed to a connection string in an application (where the connection string could be typed incorrectly).
I have checked that the protocols for TCP/IP, Named Pipes and Shared Memory are all enabled for both the server and the client.
I would like a guest to view some items on the application.
And I recently intalled SQL Server 2000 on my machine. Will integrate Access when ready.
I can access or simply read data from a db if I specify User ID and Password.
Such as....
Dim nwindConn As SqlConnection = New SqlConnection("Data Source=localhost;User Id=sa;Password=xxxxx;Initial Catalog=Northwind;")
Yes, testing first, then adjusting all my code for the SQL instead of Access.
If I leave the id and pw out, it won't read - login failure. I have read so much on authentication and some posts here, even the one on login failure, but that didn't help.
Keep in mind, just installed, only users are the default ones by the installation.
What setting in the SQL Server is there, and I have looked, that if it's a guest, no id or pw, allow read only to items such as datagrids which only read from tables?
HelloI have just completed the first part of my first intranet project, using MS Access. Next step is to transfer it to SQL Server 2000 on a Windows 2003 Server.The ASP.NET code resides on an XP workstation.I get this error: "Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.".The connection string:Dim DbConn As New SQLConnection("Server=RDDSRV1; DataBase=Serialnrs; Integrated Security=SSPI").I have also tried the same string, with user id and password for a domain adminstrator. No difference.The database has Windows security with among others ASPNET as user (login?)I have searched throu the my own litterature and this Forum, but can´t find any answer to my problems.Hope I can get a quick anwer.Rolf Dahlström
1. I Dump my Database into a dump device 2. I Rebuild my mater Database 3. I Restore my User Database. 4. At the end of the above exercise I find my relationship between sysusers (User Database) and syslogins (master) is totally screwed up. This has been causing logon problems to my User Database… 5. I tried using sp_change_users_login …but it does not seem to work.
I have several dts packages that run just fine through a third party scheduler. I then put a mail task on them to tell me if the package succeeded or failed. Every time the scheduler gets to the mail task it fails and logs a mapi login failure error. When I execute the dts package on my local box it sends the email with no problems. is it a problem with the robot login or is it associated to the profile? any help would be greatly appreciated.
I have a situation where a SQL Maintenance Task is running, and suppose to email a report to the sys admin. Currently I am getting a Microsoft SQL-DMO Error 17903, Mapi Login Failure.
I have tested the Outlook 98 application and the profile is set correctly. I have tried to send an email within SQL and I receive the error above. I have carried all activities suggested by Microsofts Online Books. Can anyone suggest where to go from here. All Service Packs have been applied.
Hi everybody, good morning !!! Im trying to open a database mounted in SQL Server Express from a code-behind file with the following connection string: "Data Source=localhostsqlexpress;Initial Catalog=DB_Name;Integrated Security=True" But I receive the following error: Cannot open database 'DB_Name'. Login failure. Login failure for user 'machine_nameASPNET' I'd really appreciate any help, suggestion or comment. Thanks a lot in advance.
Over the weekend, I attempted to move six databases from an older server to a newer one. I have installed SQL 6.5 on both with identical configurations. After migrating the data, bringing down the old server, renaming the new server and configuring the ip address, I ran into a problem. Two applications that access databases on the server were unable to login using any id other than the system administrator id. Each of these applications have been tested on a test server with the same configuration as the new and old production servers. Each installation is on an NT server with SP6 and each SQL install is using SP4. One of the applications gives an OLE DB error. Any suggestions would be appreciated. Thanks in advance.
I am not able to login to the SSMS, while I am logging I got this error, how to troubleshoot..
Cannot connect to LAASYA.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
[URL]
------------------------------ The system cannot find the file specified ------------------------------ BUTTONS: OK ------------------------------
I have a stored procedure that retrieves data via a linked server that is running on a local instance of SQL Express 2005. This has been working without problems for some time.
We are now trying to move the database with the links to either SQL Express 2005 running on a server, or an instance of SQL Server 2005. In both cases I can successfully link the servers but when the stored procedure executes it fails on the select statement from the linked server with the following message:
OLE DB provider "SQLNCLI" for linked server "mosier" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18452, Level 14, State 1, Line 0
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Why is the user name null? I've tried explicitly setting login information by running the sp_addlinkedsrvlogin procedure but get the same results. In all cases logins should be using windows authentication and all the servers are inside the corporate firewalls.
I presume there is some property somewhere that is different between the SQL instances that work and the ones that don't but I haven't been able to find anything.
