SQL mail has stopped functioning. I have checked the profile in exchnage. All is ok. I have tested the MAPI profiles in SQLAgent and SQLMail they all give success. When I run xp_sendmail the process just runs and runs without sending a mail. I end up having to kill the prorcess. Any ideas?
TableDiff Stop Functioning on 2million records with 1.8milion changes on a particular row. Only happen if "-f" is specified. Anyway to work around this?
I have a problem with SQL mail on SQL 6.5 with SP 5a . I have created a job called as mailtest and is scheduled to run every morning . The task was running successfully till last week when suddenly it stopped responding on some of the SQL 6.5 Servers .
When i stop the SQL Mail and start again through the Enterprise Manager , and then run the task , it shows as successful . Every morning i have to do it to check whether the mailtest is O.K .
But the automated mailtest task has stopped suddenly . I have checked the MAPI profile and is correct as the same is configured on other servers on which my mailtest runs successful.
can somebody tell me whats wrong with this sp..................when i pass lname only or fname only it does not return any data, but when i passs both lname and fname it returns the correct data.....when i rearrange the structure to where it checks the lname only it works also but fname doesn't .........any help is greatlly appreciated
CREATE PROCEDURE [dbo].[temp_search] ( @lname varchar(50) = null, @fname varchar(50) = null, @date1 datetime = null, @date2 datetime = null) /*set @lname = null -- 'aaa'set @fname = null --'ddd'set @date1 = '2/25/2003'set @date2 = '9/30/2004'*/ as set nocount on if not @lname is null or @lname = '' and not @fname is null or @fname = ''begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and temp_user_info.lname like @lname and temp_user_info.fname like @fnameendelse if not @lname is null or @lname = '' begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON cir_temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and temp_user_info.lname like @lname end else if not @fname is null or @fname = '' begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and temp_user_info.fname like @fname end else if not @date1 = null and not @date2 = null begin select cir_temp_user_info.*, dateTime1 FROM cir_temp_user_info INNER JOIN temp_seq ON cir_temp_user_info.temp_seq = temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and dateTime1 between @date1 and @date2 end else if not @date1 = null begin select temp_user_info.*, dateTime1 FROM temp_user_info INNER JOIN temp_seq ON temp_user_info.temp_seq = cir_temp_seq.temp_seq WHERE temp_user_info.temp_seq = temp_seq.temp_seq and dateTime1 like @date1 endGO
I have a .NET application with a sql server database backend. Ourclient has been having problems lately with data being returned fromthe database with wrong data. We have error logging in our storedprocedures and even this is reporting wrong. In every stored procedurewe have the following:IF @@Error <> 0BEGINEXEC dbo.HandleError@ErrorNum = @@Error,@ProcID = @@PROCIDENDThen, HandleError looks like:CREATE PROCEDURE dbo.HandleError@ErrorNum int,@ProcID intAS/************************************************** ****************** PROCEDURE: HandleError* PURPOSE: Handles logging an error* CALLED FM: Other stored procedures************************************************** ******************/SET NOCOUNT ONDECLARE @UserID intDECLARE @Host varchar(50)DECLARE @Len intDECLARE @SPName VARCHAR(100)DECLARE @ErrorMsg varchar(500)DECLARE @ErrorTrace varchar(4000)-- Get our host nameSET @Host = HOST_NAME()SET @Len = LEN(@Host) - CHARINDEX(':', @Host)IF @Len > 0 AND CHARINDEX(':', @Host) > 0SET @UserID = RIGHT(@Host, LEN(@Host) - CHARINDEX(':', @Host))ELSESET @UserID = NULLSET @SPName = OBJECT_NAME(@ProcID)SET @ErrorMsg = 'SQL Error: ' + @SPNameSET @ErrorTrace = 'Error: '+ CAST(@ErrorNum AS VARCHAR(50))EXEC dbo.InsertApplicationErrors@ErrorMessage = @ErrorMsg,@ExceptionMessage = '',@ErrorStackTrace = @ErrorTrace,@UserID = @UserID,@HostID = @Host,@Logfile = '';SET NOCOUNT OFFGOInsertApplicationErrors inserts a log into a table we have that wemonitor. We got an error back in the ErrorStackTrace column with'Error: 0'. That shouldn't happen, as the only time we log error is ifit is not 0.Does anyone have any ideas on what might be wrong?Steve
I have a package that executes a number of tasks includng executing other packages. In one of the sub-packages, I am looping through a directory, processing files in that directory, and copying the files to another directory after completion using a for each file enumerator and file system task. The file system task has a failure precedence constraint leaving it going into a script task which simply pops up a message box saying that an error occurred.
What I am trying to do is to allow the sub package (and parent package) to continue execution if there is an error during the file system task. This question really is unrelated to the file system task specifically... in general, how can an error be ignored and execution not stop?
On the file system task, I've set MaxErrorCount = 0 and FailParentOnFailure and FailPackageOnFailure are set to False. With MaxErrorCount = 0, the file system task itself does not fail but its parent container (the for each file enumerator) does. This failure then propogates all the way up to the parent package and execution stops. I have gotten around this by setting MaxErrorCount = 0 also on the for each file enumerator, the execute package task, and all its ancestors going all the way up to the root of the main package. This works, but maintaining this would be a nightmare. Setting MaxErrorCount = 0 and FailParentOnFailure = False at the point only where I expect the error seems like it should be enough but it obviously is not. What am I missing here?
The MSDN Library topic Using the sqlcmd utility(SQL Server Express) states "To access the sqlcmd utility, click Start, click Run, and type sqlcmd.exe."
A command prompt window opens with "SQLCMD" in the title bar. I cannot enter anything in the command prompt window and the window remains open for only about five or six seconds.
The version I have installed is MS SQL Server 2005 Express with SP2. The cumulative updates package 3 does not list this problem, so I did not install it.
-MS Server 2012 R2. -SQL 2014 EE. -All windows updates. -Clean install of both OS and SQL, all 3 nodes are identical. -SQL Server is running on an alternate port, which I've opened in the firewall. Connections from all network locations are working swimmingly; including connections between all 3 nodes. -I've got the groups up and running; Listener is set up correctly. Connections work great. -One node is synchronous, one is asynchronous. Both show synchronized, and synchronizing respectively. -Data added at the primary node is moved across to all 3 with lightning speed.
When I attempt a manual failover it hangs..and hangs...then pops up an error 41131 and rolls back the failover. Leaving the cluster perfectly intact and working just as it did prior to the failover attempt. What I've checked so far:
-There is absolutely NOTHING in the cluster events log. -Windows event log shows no errors, just the standard stuff of the primary nodes state changing from primary to resolving and then back again. -SQL Event log has a few things in there, but nothing that's leading me to a solution, I've attached the log from start to finish on an attempted manual failover:
We have a Report Server integrated with SharePoint. A month ago we deployed a report (rdl file) in SharePoint, but the person who deployed it was no longer connected with us. So we decided to deactivate it in our Active Directory. Yesterday, our users returned issues regarding they are unable to access their report. I believe the issue was "object reference not set to an instance of an object".
So I tried to download the rdl file and redeployed it but i am getting error upon deploying to SharePoint. My workaround is to delete the rdl file in SharePoint, redeploy the shared datasource and shared datasets and the rdl file. It went and was now able to run the report in SharePoint.
Is there something relation/happened when deactivating the account in AD that users unable to access the report in SharePoint?
I have a report problem. I'm using a parameter to dynamically control visibility for two tables. If the parameter is set to one value, I want to switch one of the tables to invisible, if the parameter is set to another, I want the other table to be invisible instead.
This all works fine in Visual Studio. When I publish it to my report server, the visibility controls no longer function and both tables always display. Any ideas here?
please i need your help on that sudenly me SQLserveragent stopped and when i try to start it again it give me that error: Event Type:Error Event Source:SQLSERVERAGENT Event Category:Service Control Event ID:103 Date:2/27/2006 Time:11:00:19 AM User:N/A Computer:EGDC2 Description: SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent cannot start).
Dear Experts, i've tried to add two new articles to the publisher.i failed there. now i've dropped the articles, but still replication is not working. please let me know what should i do
Arnav Even you learn 1%, Learn it with 100% confidence.
I have sql server installed on my laptop..It is a student evaluation version. Today morning,the sql server did not start and when attempted to start..I get the following message: " SQL server started and stopped immediately. Some services stop automatically if they have no work to do , for example the performance logs and alerts."
This might be kinda long so please bear with me. I have a SSIS package that creates 2 other packages to pull in data from our as400. To do this I have a SQL 2005 table setup with as400 table names and columns and the matching sql tables names (I reuse the column names). I also use a flag to determine if the table name should be added to the data retreival that way if there is a need I can just run the procedure for a specific as400 table instead of all of them. The main SSIS package loops through the table to create the package to pull in the as400 data and put it into staging database. Then the main package creates another package that pushes the data from the "staging" sql to the "live" tables. This has been working great for about 5 months now. Yesterday I went to create a new job that would allow me to run the same jobs just with making change to the flags so that only certain tables are pulled in at certain times. This works very well in our test environment. For some reason it appears that it has corrupted the production packages. I can not get them to run at all now. The untouched jobs all of a sudden quit. I changed the new job to run as operating system and not SSIS and it says that it can not find it. I can see the file, I am using the SSIS on the file system. I can open the file and see all of the properties, I can copy and paste the file. I just can not run it. I was able to finally get the package to run using the command line but now there is something odd that it is sending to the as400. The kicker to me is that nothing changed with the SSIS package and nothing changed with the existing jobs I just added new ones and now it does not work. Could this be some corruption? Anyone else seen similar behaviors?
I've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM Log Database Mail (Database Mail Log)
Log ID 402 Process ID 3936 Last Modified 2/2/2007 8:35:00 AM Last Modified By NT AUTHORITYSYSTEM
Message 1) Exception Information =================== Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException Message: Could not retrieve item from the queue. Data: System.Collections.ListDictionaryInternal TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession) HelpLink: NULL Source: DatabaseMailEngine
StackTrace Information =================== at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession) at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession) at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db) at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
I am using nt4.0 sp5 with sql7.0 sp3 and exchange client. Does anyone know how to keep xp_sendamil form putting a copy of the mail message in the sent mail folder or an automated process for deleting all mail in the sent folder? As it stands now I must manually delete all messages from the sent mail folder on a daily basis.
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.). ),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
I tried to stop SQLServer romotely through Enterprice Manager. It used to work. But, this time I got a message "a error 5 - (Access is denied) occurred while perfrming this service oetation on the MSSQLServer service." and it could not be stopped.
I'm running an SSIS package and I want to be able to skip instances that are stopped. Is there anyway that I can do a SELECT on some SERVERPROPERTY that would tell me if the instance is stopped?
Also, I was wondering about a delete from each table. I have each row timestamped in multiple tables. What could I do to set up a job to delete from each table rows after a certain timestamp?
Hi! I have an dbcc shrinkfile (emptyfile) running for more than one day now. But soon I have to restart db service. Would it give trouble, if I stop service? I assume, I must run shrinkfile command again? Thank your for help ;-)
Hello, The Database Mail feature is already enabled on the server, also I have a mail account on the other server. The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ? Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account? The mail should be sent from my SQL Server. Thank You.
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com) B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com) C - Just the end portion of the SMTP properties: (abcd.efgh.company.com) D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
I'm hoping someone can explain to me exactly what the SQLConnection.Open() method does, especially when the database is stopped. I'm trying to include some error processing in my program, specifically to ensure the database is up and running. But even with the database stopped, the Open() statement works fine. Later, when I try to read from the database, I get the error. I'd like to stop it before it gets any further. Why is the Open() statement "working" even with the database stopped?
Our stored procedure error handling is not working now but did before.
When a severity level 16 (Miscellaneous user error) occurs the batch (stored procedure) exits without processing the next statement which is the error check routine. This is a simple error processing routine and used to work. What could have changed?
I have searched books online and have found nothing on abnormal termination of a SQL batch. I would appreciate some help here.