there can be more than one Parentobject so I want to concatenate them so I have them on one line
for example
901 Joe Dow 901 Jane Dow
I want one line - | 901 | Joe Dow, Jane Dow
I found something similar as below but I'm getting dups like
901 |Joe Dow , Joe Dow 901 | Jane Dow, Jane Dow
DECLARE @Delimiter VARCHAR(10) = ' '; -- this is the delimiter we will use when we concatenate the values SELECT DISTINCT ParentObject, (SELECT STUFF( (SELECT @Delimiter + s1.[View As] FROM Signatures s2
I have a requirement where in I have to concatenate the fields based on their sequence given in another table along with respect to their lengths. eg..
Input 1:
Table A: (below are the fields and their respective values, not all fields will have values) ----------- KSCHL - ZIC0 (KEY) KOTABNR - 521 (KEY) MATNR KUNNR-->1234567890 LIFNR VKORG-->a234 PRCTR KUNRE-->4355325363 LIFRE-->88390234 PRODH
Table BIt contains the same fields as in table A and will have sequence number in which the concatenation should happen. The length field(LEN) will have corresponding field lengths(pipe delimited) should be considered in concatenation)
Note: If the field length given in Table B doesn't match with actual size of the fields then, the field should be filled with 2 left spaces while concatenation.. Eg. In above example say LIFNR value = 88390234(len =icon_cool.gif then after concat the value should be like below:
12345678904355325363a234 88390234
Note:The fields are not constant..I have around 40 fields like that in which any combination of fields can be possible...eg..
I am not sure which field has the value 1, 2 etc.. and how many fields are forming the combination..It can be sometimes 3/40 fields or it can be 10/40 fields...I have to dynamically get those values and concat...
I can have any number of fields for concatenation..above example is just for 4...it should be dynamic enough to handle any number of fields..
I have a query that produces seperate rows for people, but I want to combine them into one place. I tried doing this in SQL but apparently it's not very easy in SQL Server. You need to loop through a table using cursors. I'm not quite that advanced with SQL Server and was wondering if there might be an easier way just using SSRS.
In other words I have a table as such:
1 John Smith 2 Jane Doe 3 Matthew Jones
And I'd like to create one textbox that contains the following:
Table BSadIt contains the same fields as in table A and will have sequence number in which the concatenation should happen. The length field(LEN) will have corresponding field lengths(pipe delimited) should be considered in concatenation)
Note: If the field length given in Table B doesn't match with actual size of the fields then, the field should be filled with 2 left spaces while concatenation.. Eg. In above example say LIFNR value = 88390234(len =icon_cool.gif
then after concat the value should be like below:
12345678904355325363a234 88390234
Note:The fields are not constant..I have around 40 fields like that in which any combination of fields can be possible...eg..
I am not sure which field has the value 1, 2 etc.. and how many fields are forming the combination..It can be sometimes 3/40 fields or it can be 10/40 fields...I have to dynamically get those values and concat...
I can have any number of fields for concatenation..above example is just for 4...it should be dynamic enough to handle any number of fields..
I concatenate multiple rows from one table in multiple columns like this:
--Create Table CREATE TABLE [Person].[Person_1]( [BusinessEntityID] [int] NOT NULL, [PersonType] [nchar](2) NOT NULL, [FirstName] [varchar](100) NOT NULL, CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
how to use like operator select statement to retrieve multiple column names in sql server DB...for ex: I have a table say employees where in I want to get all column names like emp_,acc_ etc using '%' And what is this below query used for?
SELECT column_name as 'Column Name', data_type as 'Data Type', character_maximum_length as 'Max Length' FROM information_schema.columns WHERE table_name = 'tblUsers'
How to combine multiple rows to single rows for the below sql query.
SELECT dbo.AccessLog.RCDID, dbo.AccessLog.EMPLOYEEID, dbo.AccessLog.LOGDATE, LEFT(dbo.AccessLog.LOGTIME, 5) AS LOGTIME, dbo.AccessLog.INOUT FROM dbo.AccessLog LEFT OUTER JOIN dbo.LogType ON dbo.AccessLog.INOUT = dbo.LogType.INOUT LEFT OUTER JOIN dbo.viwEmployee ON dbo.AccessLog.EMPLOYEEID = dbo.viwEmployee.Employee_ID WHERE dbo.AccessLog.EMPLOYEEID='10763' AND (dbo.AccessLog.LOGDATE BETWEEN '01/04/2015' AND '01/04/2015') ORDER BY dbo.AccessLog.EMPLOYEEID
I am trying to figure out if there is a way to convert (unlimited numberof) rows into columns in SQL Server? Can this be done using a SQL query and without creating any extra tables or procedures?
Part 1: When there is ~ (tilde) and has any value after it then it goes into a new row and duplicating the other columns like the facility in the screenshot attached and new column having the sequence.
Part 2: When there is ^ (Caret) its a new column irrespective of a value present or not
CREATE TABLE [dbo].[Equipment]( [EQU] [VARCHAR](50) NOT NULL, [Notes] [TEXT] NULL, [Facility] [VARCHAR](50) NULL) INSERT INTO [dbo].[Equipment] ([EQU] ,[Notes] ,[Facility]) SELECT '1001','BET I^BOBBETT,DAN^1.0^REGULAR^22.09^22.090~BET II^^^REGULAR^23.56^0~','USA' union SELECT '998','BET I^JONES, ALANA^0.50^REGULAR^22.09^11.0450~BET II^^^REGULAR^23.56^0~','Canada' UNION select '55','BET I^SLADE,ADAM F.^1.5^REGULAR^27.65^41.475~','USA' SELECT * FROM dbo.Equipment
I created the table in excel and attached the screenshot for a clear picture as to what is required. I use text to Columns in excel to achieve this not sure if there is anything similar in sql.
ID Description ParentID Level B.01 Parent 1 H B.01.01 Parent 1.1 B.01 H B.01.01.01 Parent 1.1.1 B.01.01 H B.01.01.01.01 Detail 1 B.01.01.01 D B.01.01.01.02 Detail 2 B.01.01.01 D
[Code] .....
That means, only select Level=H, and display the last record of H with concatenated the description of each rows delimited with comma.
I have a single table that consist of 4 columns. Entity, ParamName, ParamsValue and ParamiValue. This table stores normalized Late Fee related parameters for apartments. The Entity field contains a code that identifies the apartment complex. The ParamName in a textual field that contains the name of the parameter that the other 2 fields define the value for; ParamsValue and ParamiValue. If the Late Fee parameter (as named in ParamName is something numerical then the value for that parameter can be found in ParamiValue else its in ParamsValue.
I don't know if 'Pivot' is the correct term to use for describing what I am trying to do because I've looked at the Pivot examples and I don't see how that will work for this. Using the Table and data as provided below, how would I construct a query so that I get 1 row per Entity in which the columns are the ParamsValue or ParamiValue for the ParamName listed in the column header (for the query)?
Below is the DDL to create the table and populate it.
USE [DBA_UTIL] CREATE TABLE [dbo].[PARAMEXAMPLE]( [Entity] [varchar](16) NULL,
Deciding whether or not to use a CTE or this simple faster approach utilizing system tables, hijacking them.
SELECT s.ORDER_NUMBER, s.PRODUCT_ID, 1 AS QTY, s.VALUE/s.QTY AS VALUE FROM @SPLITROW s INNER JOIN master.dbo.spt_values t ON t.type='P' AND t.number BETWEEN 1 AND s.QTY
Just wanted to know if its okay to use system tables in a production environment and if there are any pit falls of using them ?
I'm working on a script to merge multiple columns(30) into a single column separated by a semicolons, but I'm getting the following error below. I tried to convert to the correct value. but I'm still getting an error.
Error: "Conversion failed when converting the varchar value ';' to data type tinyint".
Hello, I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row: user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3 For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer): user1 answer1 answer2 answer3user2 answer1 answer2 answer3 How can this be done? How can all answers of a user appear on a single row Thanx,Danny.
I am rather new to reporting on SQL Server 2005 so please be patient with me.
I need to create a report that will generate system information for a server, the issue im having is that the table I am having to gather the information from seems to only allow me to pull off data from only one row.
For example,. Each row contains a different system part (I.e. RAM) this would be represented by an identifier (1), but I to list each system part as a column in a report
The table (System Info) looks like:-
ID | System part | 1 | RAM 2 | Disk Drive 10| CPU 11| CD ROM |
Which
So basically I need it to look like this.
Name | IP | RAM | Disk Drive| ---------------------------------------------- A | 127.0.0.1 | 512MB | Floppy
So Far my SQL code looks like this for 1 item SELECT SYSTEM PART FROM System Info WHERE System.ID = 1
How would I go about displaying the other system parts as columns with info
I have an Parent table (Parentid, LastName, FirstName) and Kids table (Parentid, KidName, Age, Grade, Gender, KidTypeID) , each parent will have multiple kids, I need the result as below:
I previously posted a problem with result set bindings but I have not been able to resolve my problem. I guess all this comes with being new to programming in this environment! Anyway, I am trying to figure out how to process from an ADO.NET connection multiple rows with multiple columns. I have to read and manipulate each row. I was originally looking at using a foreach loop but have not been able to get it to work. One reply to my previous thought I should be using a data task to accomplish this. Could someone tell me the best way to handle this situation? As a note, I am new to programming in SSIS and basically trying to learn it as I go so please bear with me! Thanks in advance!
Hi All,I'm using the sample table:ID | CODE | V1 | V2 | V3----------------------------------------------------------------1 3 10 3 431 4 9 8 221 2 6 2 551 5 57 12 6I want to get for a given ID the MAX(V1), MAX(V2), MAX(V3)and their respective CODEs.For the above table the returned record for ID=1 should be:v1=57, v2=12, v3=55, code_v1=5, code_v2=5, code_v3=2currently I've got a very messy solution, I'mlooking for an elegant way to do this.10x,Assaf.
Hi, I want to convert multiple rows to one row and multiple columns. I saw some examples with PIVOT but i could not get them to work. Heres what i want to do:
This is the how the table is: EmpID Designation
678 CFA
679 CFA
680 CFA
685 CFP
685 CIMA
685 IMCA
I want it to display as: EmpID Designation1 Designation2 Designation3 678 CFA 679 CFA 680 CFA 685 CFP CIMA IMCA
I am working with a MS SQL database associated with SCCM 2007. SCCM collects software product usage data, and I am tasked with generating a report that will return results between two user-chosen date ranges. I set up prompts for month, year, endmonth, endyear. They would enter 2, 2014, 4, 2014 for example. Timekey would equal 201402, endtimekey = 201404. The tables I am concerned about look like this:
The problem is I only know how to grab one timekey, but I need to combine multiple timekeys to sum up the usage counts for each workstation.
Here is the full query.
declare @TimeKey int declare @months float declare @endTimeKey int set @TimeKey=100*@Year+@Month set @endTimeKey=100*@endYear+@EndMonth select @months=DATEDIFF(d,@timekey,@endTimeKey)
