SQL Server 2012 :: Rows To Columns Conversion
Aug 28, 2014
I would like to reach out in converting rows to cols.
Format:
NodeName|upsBasicIdentName|upsBasicIdentModel | upsAdvIdentSerialNumber | upsAdvIdentDateOfManufacture | upsBasicBatteryLastReplaceDate
I have this query. the values of each are under status.
SELECT
Nodes.Caption AS NodeName, CustomNodePollers_CustomPollers.MIB AS MIB, CustomNodePollerStatus_CustomPollerStatus.Status AS Status
FROM
((Nodes INNER JOIN CustomPollerAssignment CustomNodePollerAssignment_CustomPollerAssignment ON
[Code] ....
View 3 Replies
ADVERTISEMENT
Jan 29, 2014
Is there a efficient way to compare two different columns of 2 different rows in a data set as shown below.
For eg: I would like to DateDiff between Date2 of RowID 1 and Date1 of RowID 2 of IDNo 123. After this comparision , if datediff between two dates are <=14 then i want to update 1 else 0 in IsDateDiffLess14 of RowID1 . In below example its 0 because datediff of two dates >=14. So, want to compare the Date2 and Date1 in this sequence for the same IDNo. For RowID 6 there is only 1 row and no other row to compare, in this case IsDateDiffLess14 should be updated with 0.
RowID IDNo Date1 Date2 IsDateDiffLess14
1 123 04/10/2013 04/12/2013 0
2 123 05/10/2013 05/11/2013 1
3 123 05/21/2013 05/25/2013 0
4 112 01/10/2013 01/14/2013 1
5 112 01/27/2013 01/28/2013 0
6 120 03/10/2013 03/12/2013 0
View 4 Replies
View Related
Nov 13, 2014
I have 5 columns in my database. 1 column is coming like a dynamic.
I want to convert records from rows to columns. Currently I have a data like this.
Race AgeRange Amount
W 17-20 500
W 21-30 400
W 31-40 200
A 17-20 100
H 41-50 250
H 51-60 290
So age range is not fixed and it can be any and I have one separate relational table for age range where it's coming from. Now I want to convert it into columns like
Race 17-20 21-30 31-40 41-50 51-60
W 500 400 200 0 0
A 100 0 0 0 0
H 0 0 0 250 290
View 1 Replies
View Related
Feb 18, 2015
What I need to be able to find is any records where the Discontinue_Date is greater than the Effective_Date on the next row for a given Customer ID and Part_ID. This is a customer pricing table so the Discontinue_Date of row 53 for example should never be greater than the Effective_Date of row 54130, these are the records I'm looking to find. So I'm looking for a SELECT query that would look for any records where this is true. Obviously the last Discontinue_Date row for a Customer_ID will not have a next row so I wouldn't want to return that.
View 9 Replies
View Related
Mar 26, 2015
I currently have data stored in a temporary table and I would like to transpose the data into a better format. I would like for the query to be dynamic since one of the tables currently has over 500 columns.
The attached file provides an example of the table structure along with sample data. Below the first set of data is the desired final format.
View 2 Replies
View Related
Aug 15, 2015
I need to pivot my records in columns into rows. Here is sample data:
create table #columnstorows
(
Payervarchar (5),
IDvarchar (5),
ClMvarchar (2),
Paid1float,
[Code] ....
Desired result:
Payer1Payer2ID1ID2Paid1APaid1BPaid2APaid2BPaid3APaid3B
U001 U002 00100276.58 19.53 153.4896.43 53.48 200
View 6 Replies
View Related
Nov 12, 2014
I am working on a sql data that has a list of product names, shipment type and the count of shipments. The values are listed as rows in the database. it will be in the below format.I want to transpose only the shipment type and the corresponding count of each product name in the below format.I tried to do this but i am not able to achieve in the correct format.
View 6 Replies
View Related
Oct 28, 2015
I have the following results:
CustomerProductName ValueChargesNewCharges
13AZ 40005056
13BY 30023
13BX 50003536
13BW 16001312
13BV 107009392
13BU 7000109110
And would like to get my results in 1 row with the Customer then 2 columns for Products, 6 columns for Name/Value/Charges/NewCharges.
View 9 Replies
View Related
Feb 3, 2015
I have this query:
SELECT TOP (100) PERCENT dbo.Filteredfs_franchise.fs_franchiseid AS FranchiseId, dbo.Filteredfs_franchise.fs_brandidname AS Brand,
dbo.Filteredfs_franchise.fs_franchisetypename AS [Franchise Type], dbo.Filteredfs_franchise.fs_franchisenumber AS [Franchise Number],
dbo.Filteredfs_franchise.fs_transactiontypename AS [Transaction Type], dbo.Filteredfs_franchise.fs_franchisestatusname AS [Status Code],
[Code] ....
I need to pivot this so I can get one row per franchiseID and multiple columns for [Franchisee Name Entity] and [Franchise Name Individual]. Each [Franchisee Name Entity] and [Franchise Name Individual] has associated percentage of ownership.
This has to be dynamic, because each FranchiseID can have anywhere from 1 to 12 respective owners and those can be any combination of of Entity and Individual. Please, see the attached example for Franchise Number 129 (that one would have 6 additional columns because there are 3 Individual owners with 1 respective Percentage of ownership).
The question is how do I PIVOT and preserve the percentage of ownership?
View 3 Replies
View Related
Oct 16, 2014
I am trying to create a calendar style report that will have 12 months (as columns) and store opening listing in rows. I have created a matrix, but the problem that I have is that the store opening listing displays in the right period, but they are not in any order. I would like to have the openings always on top, right under the header in the matrix. Now I have them scattered randomly all over the matrix. I tried numerous way of sorting and that does not work.
I am attaching a sample of what I would like to accomplish (months are columns).
View 0 Replies
View Related
Aug 5, 2014
I concatenate multiple rows from one table in multiple columns like this:
--Create Table
CREATE TABLE [Person].[Person_1](
[BusinessEntityID] [int] NOT NULL,
[PersonType] [nchar](2) NOT NULL,
[FirstName] [varchar](100) NOT NULL,
CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
View 1 Replies
View Related
Mar 2, 2015
I have the following results:
ID, Office1
1, Testing
1, Hello World
What i am trying to do is to get this result:
ID, Office1, Office2
1, Testing, Hello World
how i can accomplish this task.
View 3 Replies
View Related
Apr 18, 2014
write a query which retrieves only unique rows excluding some columns.
IdStatusmanager Team Comments Proj number Date
19391New XUnassigned One 3732.0 16-Apr-14
19392Can YCustomer Two 3732.0 17-Apr-14
19393Can YCustomer Two 3732.0 17-Apr-14
19394Can YCustomer One 3732.0 18-Apr-14
19395New YCustomer One 3732.0 19-Apr-14
19396New YCustomer One 3732.0 21-Apr-14
19397New ZCustomer One 3732.0 20-Apr-14
In the above table project number and id shouldn't be considered and I should get the unique rows considering rest of columns and sorted based on date. Expected result is
IdStatusmanager Team Comments Proj number Date
19391New XUnassigned One 3732.0 16-Apr-14
19392Can YCustomer Two 3732.0 17-Apr-14
19394Can YCustomer One 3732.0 18-Apr-14
19395New YCustomer One 3732.0 19-Apr-14
19397New ZCustomer One 3732.0 20-Apr-14
19396New YCustomer One 3732.0 21-Apr-14
View 4 Replies
View Related
Jun 15, 2015
I have attached SQL File which Gives me the below resultset Excel.xlsx
But the problem is i am not able to round off the dynamic columns in side my PIVOT, how to rewrite the dynamic query.
View 4 Replies
View Related
Nov 4, 2014
I am in need of converting serial date to regular date ie...735510.40461 and only need the hours, minutes and seconds, I have used the examples I've seen on different forums,
DATEADD(d, -1, DATEADD(m, DATEDIFF(m, '1900-1-1', getdate()) + 1, '1900-1-1'))
View 9 Replies
View Related
Dec 15, 2014
How do I pass a variable to an INT calculation?
CREATE PROC CLEAR_MY_TABLE
@TableStat varchar(30)
AS
If OBJECT_ID('MyDB.dbo.' + @TableStat + '') is not null
BEGIN
---PRINT 'I FOUND THE TABLE'
DECLARE @count INT = -1;
SELECT @count = (Select COUNT(*) FROM [dbo]. + @TableStat);
IF (@count > 0)
BEGIN
TRUNCATE TABLE @TABLESTAT
END
View 8 Replies
View Related
Aug 14, 2015
I have column moddat which is of varchar(10,null)
Here is my data:
20020415
20020508
19991104
19990701
20040514
20021112
20020124
19990628
20020514
20010822
I want those data in this format YYYY-MM-DD
How to convert varchar to datetime?
View 2 Replies
View Related
Dec 19, 2013
Within in Visual Studio 2012 solution, I have several projects, one of which is a Database project. I am defining several tables. The one in question is:
CREATE TABLE [dbo].[tblKppHierarchyPcl]
(
[ID] NUMERIC(18,0) NOT NULL,
[Name] VARCHAR(500),
[PartStructureKey] NUMERIC(18,0) NOT NULL,
[PartNumber] VARCHAR(500) NOT NULL,
[ParentPartNumber] VARCHAR(500) NULL,
[code]...
Error SQL72014: .Net SqlClient Data Provider: Msg 245, Level 16, State 1, Line 76 Conversion.failed when converting the varchar value 'Coolant Quick Disconnect' to data type int.So it has a problem with inserting 'Coolant Quick Disconnect' into the Name column. The Name column is CLEARLY a varchar column but somehow it thinks it's an int column.
View 8 Replies
View Related
Feb 20, 2014
I have a table ("MyData") with string columns that have nvarchar data that looks like this:
ColA
--------
42/90
78/109
I plan to do a mathematical grouping on the numerator (eg: 0-10,11-20,21-30, etc... ), So I need to grab the numerator and turn it into an int. For reasons I can't get into, I have to do this in pure T-SQL.
So my question: How would I write a select statement that regex pattern matches "^([0-9]+)/" on ColA and returns integers instead of text?
E.g. THis Query:
SELECT [magic t-sql syntax] as Converted_ColA from MyData
should return this set of int values:
42
78
View 8 Replies
View Related
Oct 30, 2014
I have been trying to convert datetime but keep getting this error(Conversion failed when converting date and/or time from character string.It works just fine if I don't use execute sp_executesql,.
<code>
DECLARE @tablename AS nvarchar(max)
DECLARE @SQLQuery AS NVARCHAR(MAX)
DECLARE @ParameterDefinition AS NVARCHAR(100)
DECLARE @startdate datetime
[code]....
View 5 Replies
View Related
Sep 15, 2015
In a stored procedure, the following code is causing a huge read and CPU load when it really shouldn't. The @IDParameter below is coming in as a parameter to the proc.
Here's the snippet of code where the problem is coming in:
DECLARE @ID INT;
SET @ID = (SELECT ID From OtherTable WHERE FKID = @IDParameter);
SELECT COUNT(*)
FROM LargeTable
WHERE MostlyZeroID = @ID AND MostlyZeroID > 0Most (90+%) of the MostlyZeroID rows are 0 (hence the name) but regardless of distribution this should evaluate with minimal work on SQL Server's part to 0. However, when this was run, it is using a ton of CPU and doing a ton of Reads as it seeks through the entire index. When I look at the execution plan, I see under the seek predicate a Scalar Operator(CONVERT_IMPLICIT(int,[@1],0)) which is what is destroying the performance.
I've confirmed that the MostlyZeroID column in the LargeTable is defined as an INT NOT NULL. I also tested the scenario outside the stored procedure without any variables as the following to make sure it wasn't some kind of strange parameter sniffing scenario:
SELECT COUNT(*)
FROM LargeTable
WHERE MostlyZeroID = 0 AND MostlyZeroID > 0
However, this query also did the implicit conversion. I then tried this out on a temp table populated with a similar number of records (100 million) with a similar distribution and I didn't get the implicit conversion (I got a constant scan as I would've expected) when I did this:
SELECT COUNT(*)
FROM #TestTable
WHERE MostlyZero = 0 AND MostlyZero > 0
I also tried the same on several other tables that are set up similarly (large amount of zeros in an INT column) and I always got a constant scan and didn't do an implicit conversion.
why the query engine is interpreting this 0 as something other than an INT and doing an implicit conversion when getting the count in the scenario above? What can be done to protect against it? In the above scenario, an IF @ID > 0 statement was placed before the code including the count since there was no reason to even run the code if the @ID was equal to zero.
View 9 Replies
View Related
Oct 19, 2015
I'm working on a script to merge multiple columns(30) into a single column separated by a semicolons, but I'm getting the following error below. I tried to convert to the correct value. but I'm still getting an error.
Error: "Conversion failed when converting the varchar value ';' to data type tinyint".
select
t1.Code1TypeId + ';' +
t1.Code2TypeId + ';' +
t1.Code3TypeId + ';' +
t1.Code4TypeId as CodeCombined
from Sampling.dbo.account_test t1
where t1.Code1TypeId = 20
or t1.Code2TypeId = 20
or t1.Code3TypeId = 20
or t1.Code4TypeId = 20
View 4 Replies
View Related
May 15, 2014
Is there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.
I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.
View 5 Replies
View Related
Aug 12, 2014
I am doing a Case statement to create a unified field for account type and vendor, in the code below I am receiving the error in the subject, because the account numbers have alpha characters in the string, I need to make them as OTHER if the first 2 left chars are Alpha, I thought how I have ISNUMERIC would do that but I am still getting the error.
I am also including example of how the account_numbers are formatted.
R222209
R222220
R222222
R222212
R221123
F707768
[Code] .....
View 5 Replies
View Related
Dec 12, 2014
I run the following statement and it will not update beyond 7 million plus rows and I have about 38 million to complete. I keep checking updated row counts and after 1/2 day it's still the same so I know something is wrong because it was rolling through no problem when I initiated it. I need to complete ASAP so it's adding to my frustration. The 'Acct_Num_CH' field is an encrypted field (fyi).
SET rowcount 10000
UPDATE [dbo].[CC_Info_T]
SET [Acct_Num_CH] = 'ayIWt6C8sgimC6t61EJ9d8BB3+bfIZ8v'
WHERE [Acct_Num_CH] IS NOT NULL
WHILE @@ROWCOUNT > 0
BEGIN
SET rowcount 10000
UPDATE [dbo].[CC_Info_T]
SET [Acct_Num_CH] = 'ayIWt6C8sgimC6t61EJ9d8BB3+bfIZ8v'
WHERE [Acct_Num_CH] IS NOT NULL
END
SET rowcount 0
View 5 Replies
View Related
Jan 27, 2004
Hello!
I am trying to figure out if there is a way to convert (unlimited numberof) rows into columns in SQL Server? Can this be done using a SQL query and without creating any extra tables or procedures?
Please let me know.
Thanks much.
-PV
View 5 Replies
View Related
Oct 29, 2015
I am struggling with doing what should be a fairly simply transpose of columns to rows. I have found some examples but nothing I could get working.
I have data in the form of:
Brand, Model, Color1, Color2, Color3, Color4, Color5, Color6
Honda, Accord, Red, Grey, Black, White,,,
Toyota, Corolla, White, Black,,,,,
The output should look like:
Brand, Model, Color
Honda, Accord, Red
Honda, Accord, Grey
Honda, Accord, Black
Honda, Accord, White
Toyota, Corolla, White
Toyota, Corolla, Black
View 2 Replies
View Related
May 16, 2007
Hi,
I have the following data in a table called "Products" :
Product Qty LHinging RHinging
-------- ----- -------- --------
Panel_1 1 R
Panel_1 1 L
Panel_1 1 R
Panel_1 1 R
Panel_2 1
Panel_2 1 L
I need to group this data like this :
Product Qty LHinging RHinging
-------- ----- -------- --------
Panel_1 3 L R
Panel_2 1
Panel_2 1 L
How can I do that ???
Thanks !
View 3 Replies
View Related
Jan 29, 2015
Currently I have a table that looks like the one below and I need to concatenate the description column and keep the rest of the row the same.
current:
IDSeq Desc DateOpen DateClose
1 AA description 1 1/1/2015 12/31/2015
1 AB description 2 1/1/2015 12/31/2015
Desired outcome:
ID Desc DateOpen DateClose
1 description 1,description 2 1/1/2015 12/31/2015
View 4 Replies
View Related
Jun 14, 2007
I'm using Visual Studio 2005 and SQL Server 2005. I am creating a report to put on the Internet using C# and other .NET features. I'm building several charts using database information extracted from Microsoft Excel. I can make charts based on the data from columns using the categories, series, and values on the Data tab of chart properties. However, when I create a query that grabs a record ( a row) from a database, it forces me to use the field values even though each field contains only one value.
Basically, I want to take a row from a database and make it my x-axis data values and another row (record) from a database and make it my y-axis data values.
I'd prefer not to change the format in the database, if possible. Thanks in advance.
View 1 Replies
View Related
Dec 25, 2005
Hello,
I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row:
user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3
For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer):
user1 answer1 answer2 answer3user2 answer1 answer2 answer3
How can this be done? How can all answers of a user appear on a single row
Thanx,Danny.
View 1 Replies
View Related
Aug 5, 2014
I managed to transpose rows into columns.
;WITH
ctePreAgg AS
(
select top 500 act_reference "ActivityRef",
row_number() over (partition by act_reference order by act_reference) as rowno,
t3.s_initials "Initials"
from mytablestuff
order by act_reference
[code]...
But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..
ref, initials
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view
ref, init1,init2
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
View 6 Replies
View Related
Jan 24, 2008
I have a report which is a list of items and I display everything about the item. It is great. My report table in the layout tab is simple. Header,Detail,Footer. Each Item has 65 columns. The number of items (rows) vary upon what you want to see. Example data.
Item#, Description, CaseSalePrice, Cost, BottleSalePrice, Discount
123, Grenadine, 100.00, 75.00, 15.50, 2.00
456, Lime Juice, 120.00, 81.00, 17.25, 2.00
There could be 1 item or 4000 items.
What I want to see is.
Item # - 123, 456
Description - Grenadine, Lime Juice
CaseSalePrice - 100.00, 120.00
Cost - 75.00, 81.00
BottleSalePrice - 15.50, 17.25
Discount - 2.00, 2.00
What I am actually doing is running this the top example and saving to excel. Then copying the sheet. Creating a new sheet then doing a paste special transpose and this gives the users what they want to see.
I want to grab that table object in the report layout tab and twist it 90degrees so the header is on the left, detail is in the middle and the footer is on the right. It would be perfect.
The dynamic column need is really the problem here. I never know how many items will be in the report. They all have the same basic information like description and pricing.
I am all out of creative ideas, any help would be appreciated.
View 6 Replies
View Related
