SSIS Central Server?
Sep 20, 2007
We have about 150 SQL servers and basically we're considering the pros and cons of installing SSIS on a central SSIS server - that is responsible for all DTS jobs - as opposed to installing SSIS on the local SQL instance.
On the plus side so far:
1./ Central administration, alerting, change management etc
2./ Possible performance gain on the local instance not having SSIS installed?
On the negative side:
1./ Central point of failure
2./ Possibility that it would need to be a clustered...
3./ Compatibility issues may mean having to make the central SSIS server 32-bit?
4./ Possible performance cost of remote SSIS?
5./ With multiple DTS packages running at different times, when would we take the server down for maintenace...?
Would appreciate your thoughts.
View 7 Replies
ADVERTISEMENT
Nov 7, 2000
I am attempting to centrally register all of my sql server so I can go to any workstation and open enterprise manager and select to read the sql server registration from the remote server.
I followed all of the steps in books on line about going to the central server, turning off the store/user independent option, registering all of the servers and then going to a workstation and selecting the option to read from the central server.
I get error messages like registry read error: 5 and registry read error: 2
This is getting frustrating because we have a lot of servers in our environment and re-registering them everytime is getting to be quite a pain. If the central store will not work, is there a way to write a script to register all servers in an enterprise.
Thanks,
PJ
View 2 Replies
View Related
Jun 26, 2001
Has anyone had any luck trying to use a central store for server registration information? I'm following the steps but it doesn't seem to work.
I receive the following error: The Server Registration Information could not be loaded - Registry read error:2
Any help is appreciated.
View 1 Replies
View Related
Jun 3, 2015
As CM doesn't support SQL authentication, and if access SQL Server on another domain with no trust, we cannot use Windows authentication as well.
CM only supports Windows authentication, but for large organizations which will have multi domains.
I am thinking if there is no proper way/tool, we will develop one then.
View 0 Replies
View Related
Apr 2, 2015
Is there anyway we could retrieve the job history for all the jobs in all the sql server using Central Management Server?
View 0 Replies
View Related
Jun 4, 2015
As CM doesn't support SQL authentication, and if access SQL Server on another domain with no trust, we cannot use Windows authentication as well.
CM only supports Windows authentication, but for large organizations which will have multi domains...
View 2 Replies
View Related
Apr 12, 2007
I'm not quite sure where to post this question, so I'll try here. We've been struggling getting SQL2005 reporting services integrated with Share Point Services 3.0 for several days now.
We've installed SQL Reporting Services with SP2 and run the SharePoint Reporting Services add-in. We've been able to go through the SQL Reporting Services Configuration and now were at the last step in the SharePoint Application Management Reporting Services configuration.
The first two steps of Manage Integration Settings and Grant Database Access was sucessful. The final step of "Set Server Defaults" gives us a 404 error message. There is nothing in the Event Log to suggest that there was a problem, and the SQL2005 Server is in SharePoint Integration mode. I've searched but can't find a solution. Can anyone steer me in the right direction please?
View 27 Replies
View Related
Apr 29, 2015
i have used CMS in SQL 2008 R2. i have added couple of servers in its group. i have executed a query & i need to send the query output in the form of email.
basically query is checking the rows count from couple of user tables in servers.
issue here is how to copy the data that is used by CMS? i need to work on automate the rows count in difft user table in db servers.
View 2 Replies
View Related
Nov 1, 2007
Hi I would like to use SQL Express as a central database in a project but I have few things in my mind needs to be answered.
I need to create a parts table and when a user opens a part in the client application no other user should be able to modify that part info. Is this taken care by database or should I use a flag in the parts table which indicates particular part is opened and in use?
If a row (a part) in part table is read by a client how this effects the other related tables? For instance if I open part1 info in my client application and also accessed to part1 properties in another table, how can I prevent other clients to make modification in related tables related rows?
What is the best way for submiting an image for a part in part table? I dont want to store images in the database. Do I need some file transfer code which takes care of transferring image and returns the path to the database?
Thanks
View 7 Replies
View Related
Mar 5, 2008
Hello,I faced a problem while reading some strings from the database (SQL 2005). Some letters are encoded with html codes making the sorting really difficult. I tried to use IComparer objects with different CultureInfo information, but it doesn't do any good.I am quite new to the web development, so I don't really have any clue if there is a recommended and clean way of solving this problem. It could be that it's something really simple, but I only came up with an idea of search and replace in all strings. If possible, I would like to omit this. :) If not, please let me know.Thanks in advance.
View 1 Replies
View Related
Jan 5, 2005
I have a question about MS sql 2000 and hope someone can give me a hand though this may not be the most suitable place to post.
I have created multiple databases storing multi-country data. Tables and store proc in each db are exactly the same except they are placed and run in different dbs in runtime.
My question is:
Is it possible to centralize all the store proc and function into a central db (or a dummy db) for easy maintenance but it allows us to point to the desired database environment in runtime even I run the store proc in central database.
I find the "Use database" command but it does allow us to use it in store proc. Any advice or suggestions???
Thanks in advance
bryan
View 4 Replies
View Related
Apr 26, 2007
Hi,
I am trying to acheive the central subscriber model for Sql server 2005 replication. I have two publishers and the centrol subscriber. Both publishers are Sql server 2005 Workgroup edition. The following table shows the Software I have used for the test.
SQL version
Service pack
HotFix
Publishers
SQL Server 2005 Workgroup edition
2
1
Subscriber
SQL Server 2005 Enterprise edition
2
1
I have encountered an obstacle in the replication process to achieve the Central subscriber model. I have configuration table, It exists on servers TB1 and TB2 and want to amalgamate the data to a central subscriber. There are two duplicate primary key and overlapping values existing across the 2 publisher tables. These records need to be updated during the process of replication.
TB1
Guid Name CreatDate EditDate
34a.. TEST02F 3/6/2007 3/6/2007
775.. EP109F 1/29/2007 1/29/2007
ffe.. EP109G 1/26/2007 1/26/2007
TB2
Guid Name CreatDate EditDate
d008.. MS060F 7/20/2005 11/21/2006
775.. EP109F 1/29/2007 1/29/2007
ffe.. EP109G 1/26/2007 1/26/2007
Normally, the default Article properties settings are used 'DROP existing table and re-create it', however here we don't want this setting, because the one table records will then be removed, leaving just the data from the other table. So, we modify the article properties on the snapshot tab to 'Keep the existing table unchanged'€™. As result we got the PK violation error.
I have tried using -SkipError option in distribution job Replication Agent Profiles, that did not work.
Thank you for your help
View 2 Replies
View Related
Jul 21, 2006
Hi, I've spend quite a bit of time on this but no luck. so any help is really appreciated.
I'm writing a class library dll that would pull data from a central db to offsite comps, manipulated then updated it back to the central db, much like systems salemen would use. Please keep in mind that i'm talk about LARGE amount of data. I want downloaded data to be manipulated on the client computer(without direction connection to db server) with EXCEL or something of the likes then upload changes back to the central DB.
Is there anything in SQL Integration Services that would help me? please keep in mind that data are distributed to computers over the internet, not on the same LAN. Please be as specific as possible
i'd really appreciate any help you guys can provide, thanks.
Vu,
View 4 Replies
View Related
Dec 11, 2014
SQL Server service accounts; the default (and recommended) service account is NT ServiceMSSQLServer virtual service account - which is shown as MSSQLSERVER locally - if you want to assign permissions to a local location. Fine, that's OK, works.
For network resources, as far as I understand it (or think I do, anyway), a virtual service on a box is made visible to the network using the <Domain><Computer>$ credential. Eg for box Bimble on Domain Wimble - if I want to give access to a directory on backupServer1, I simply assign rights to WimbleBimble$ and SQL Server should get those rights.
This, or so I thought, should allow SQL Server access to that location. The thing is, when trying to access that location, it's throwing an access denied error. But it works fine with LocalSystem.
Do I need to do some additional configuration to allow the Virtual Service account to be shown via <Domain><Computer>$ ?
View 1 Replies
View Related
Dec 6, 2005
Dear group,i have the following setting:satellite databases in different locations with the same structure (andsometimes identical data) need to be replicated into one centraldatabase. The databases hold information on machine results andmachines are numbered from 1 to n.Results for machine 1 in location 1 should be entered in the centraldatabase whereas results for machine 1 in location 2 should also beentered.Thus i would need a copy of the tables in the satellite database whichadds one column for "location id" (or something like that).Is there an easy way to accomplish this ? Seems to me that thereplication scenarios in the "replication wizard" for SQL-Server missout this case.Some hint at documentation or websites would be extremely helpful.Thanks + Greetings from ViennaUli
View 1 Replies
View Related
Jan 16, 2007
I installed the Reporting Service for Share Point just fine but when I go to central admin I do not see the reporting service section. Any Ideas?
View 4 Replies
View Related
Mar 7, 2007
I downloaded and installed SQL Server 2005 SP2 update on my reporting services server. I think downloaded and installed the share point reporting services admin to my share point dev server. I open up the central administration and there is no reporting services menu option under the Application menu. The sharepoint server is a farm with backend database on one server and all the web apps on the other (where the add-in was installed). The reporting server is a separate server running its own instance of SQL 2005.
Am I missing something with this setup?
View 1 Replies
View Related
Feb 27, 2007
Hi
I had the following setup:
Farm Server 1
* Sharepoint 2007 full install
Farm Server 2
* SQL Server 2005
I installed the following:
* SP2 for SQL Server 2005 on Server 2
* Web-front end install of Sharepoint 2007 on Server 2 - to install the object model
* SSRS2005 reporting services add-in for Sharepoint technologies on Server 2
Since doing that, I can no longer get to central administration on Server 1 - I now get the following error when navigating to central admin:
Server Error in '/' Application.
Runtime Error Description:
An application error occurred on the server. The current custom error
settings for this application prevent the details of the application error from
being viewed remotely (for security reasons). It could, however, be viewed by
browsers running on the local server machine.
Which web.config do I have to edit to get the full error to show, and has anyone else experienced this?
This happened to me when my servers were fully configured and had data - so I rebuilt them from scratch and the same problem occured again!
Adam
View 8 Replies
View Related
May 18, 2015
We are planning to move all of our System Center Databases that reside on front end servers to each system center application to a centrally located SQL 2012 server. We'd like to centralize everything and have our DBA care for the server. here is our setup:
SCOM has 1 monitoring and 1 Data warehouse server. SCCM has 1 server with all roles on it. DPM database is on the same server as Application. Same with SCVMM. I have 2 questions regarding this move:
1. Can I have all these databases running on 1 SQL instance?
2. Is there a best practice document that highlights steps and "gotchyas"
View 4 Replies
View Related
Aug 29, 2015
there are several remote locations where sql is running, my company has asked me to find a way to collect all the data from the remote locations to a central location automatically,for example day to day data should be synced at night time from 2am to 7 am and it should be compressed automatically before data transfers to the central location. NOTE there is no domain only standalone workstations
View 3 Replies
View Related
Sep 25, 2006
Hi all,
I am new to replication and have a few questions.
1) Are there any "hooks" available to insert processing when a subscriber is about to copy data from a replicating site?
2) Is it possible for a subscriber to change only his local copy of the data - without replicating the changes back to the publisher?
I realise that once the data changes in one place it isn't really replicated anymore, and I realise that my limited knowledge of the subject might well mean I'm not even asking the right questions. Therefore, I shall try to describe as best I can my scenario.
I wish to use many servers for transactional input (to distribute the workload) and use replication to publish the inputted data to a subscribing central site. One of the tables I wish to replicate has an identity column as primary key, but the records should otherwise be unique - i.e. no two records should differ only in the value of the key. Another table, which should also be replicated, uses this id value as a foreign key.
I can use the identity increment and seed to guarantee no key violations will occur when copying data to the central server. However, there is another issue: Several servers can create the same record but with different id values.
I need to "merge" such records by deleting duplicate entries in the table with the identifier as primary key, and update the foreign keys correspondingly. To clarify (I hope!), here's an example of what data I might have on the central site after copying data from two input sites:
TRANSACTION table
amount = 200, metadata_id = 1001 // Replicated from server INPUT_1
amount = -117, metadata_id = 2001 // Replicated from server INPUT_2
METADATA table:
id=1001 Actitiy=Sales, Country=USA
id=2001 Activity=Sales, Country=USA
What I would like is basically for the central site to identify that metadata 2001 is really the same as metadata 1001, update the foreign key in the TRANSACTION record accordingly and not import (or delete, if this "merging" is done in a post-treatment) the duplicate metadata record.
If anyone can offer any advice on how to achieve this I would appreciate your input.
View 3 Replies
View Related
Sep 2, 2015
We need to replicate multiple databases (publications) to one central subscriber. The schema of those articles are identical in all publications and also the primary keys in publications do not have any overlap.
Is this possible?If yes is there any specific thing that I should consider for it's implementation? Should each publication has it's own dedicated distributor or all of them can share one distributor?
View 2 Replies
View Related
Oct 15, 2015
Is it possible to replicate data from 3 publishers to a single/central subscriber transactionally? In other words I have Server A, Server B, Server C with databases A,B,C respectively. I need to replicate 2 articles from A,2 from B and 2 from C to a central Server D that hosts database D. D will have only 6 articles. The replication is Transactional Replication.
If it is possible what will be the drawbacks of such implementation? (if one server goes down will the whole replication break?) If not possible then what is the best way of implementing this?
View 3 Replies
View Related
Nov 2, 2007
Greetings:
I am trying to gather into a central location the missing index data from the sys DMV's for dynamic index creation in the next step. In trying to use a cursor, I get the following errors:
Msg 154, Level 15, State 3, Line 20
variable assignment is not allowed in a cursor declaration.
Msg 102, Level 15, State 1, Line 94
Incorrect syntax near 'Get_Data'.
Msg 16916, Level 16, State 1, Line 2
A cursor with the name 'Get_Server' does not exist.
Msg 16916, Level 16, State 1, Line 3
A cursor with the name 'Get_Server' does not exist.
Here is the SQL:
--CREATE PROCEDURE usp_Get_Missing_Index_Data
--AS
--Declare @Sql2 nvarchar(4000)
Declare @Sql nvarchar(4000)
DECLARE Get_Server Cursor -- gets a server name from a list of servers
for
Select MachineName from rsqlaudit1.DBStatistics.dbo.servers
Open Get_Server
Declare @Server nchar(20)
Fetch Next from Get_Server Into
@Server
While (@@FETCH_STATUS = 0) --and (@@FETCH_STATUS <> -2)
BEGIN
DECLARE Get_Data Cursor
FOR
select @sql= 'select distinct id.*
, gs.avg_total_user_cost
, gs.avg_user_impact
, gs.last_user_seek
,gs.unique_compiles
from '+@Server+'.master.sys.dm_db_missing_index_group_stats gs
,'+@Server+'.master.sys.dm_db_missing_index_groups g
,'+@Server+'.master.sys.dm_db_missing_index_details id
where gs.group_handle = g.index_group_handle
and id.index_handle = g.index_handle
order by gs.avg_user_impact desc'
exec (@Sql)
Open Get_Data
DECLARE @Handle int,
@database smallint,
@object int,
@equality nvarchar(4000),
@inequality nvarchar(4000),
@Included nvarchar(4000),
@statement nvarchar(4000),
@avg_user_cost float,
@avg_user_impact float,
@last_seek datetime,
@compiles bigint
Fetch NEXT FROM Get_Data INTO
@Handle,
@database,
@object,
@equality,
@inequality,
@Included,
@statement,
@avg_user_cost,
@avg_user_impact,
@last_seek,
@compiles
While (@@FETCH_STATUS = 0) --and (@@FETCH_STATUS <> -2)
BEGIN
insert into rsqlaudit1.DBStatistics.dbo.Missing_Index_data
values (@Server,
@Handle,
@database,
@object,
@equality,
@inequality,
@Included,
@statement,
@avg_user_cost,
@avg_user_impact,
@last_seek,
@compiles)
FETCH NEXT FROM Get_Data into
@Server,
@Handle,
@database,
@object,
@equality,
@inequality,
@Included,
@statement,
@avg_user_cost,
@avg_user_impact,
@last_seek,
@compiles
Fetch Next from Get_Server Into
@Server
END
CLOSE Get_Data
DEALLOCATE Get_Data
GO
CLOSE Get_Server
DEALLOCATE Get_Server
GO
Any suggestions are appreciated.
Thanks,
Derek
View 3 Replies
View Related
Jan 22, 2007
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
View 18 Replies
View Related
Nov 16, 2006
Hi,
Just want to ask if there will be any difference if I start to develeope a a package from the SSIS dev? rather than the enterprise edition?
View 3 Replies
View Related
Jul 7, 2015
I have two calls to stored procedures that in an SSIS package fails silently. They are simply not executed in production but works fine in test, nothing happens and the sql server agent reports that everything has gone just fine.
In test they have 1 server with db A and B. No issue here.
In prod they have 2 servers with db A and B. On server 1 sql server agent executes a job that includes an SSIS package that on server 2 runs a couple of sp's. That user is db owner on server 2 db B and yet nothing happens. The sp's are not executed.
If I in prod run the job manually then it works, but not when run with the sql server agent account that as said is even db owner.
View 2 Replies
View Related
Feb 7, 2007
I can't find 'SQL Server: SSIS Pipeline' performance object in performance monitor on a 64-bit SQL Server. I see it on a 32-bit. Does anybody know why?
Thanks
View 3 Replies
View Related
Mar 8, 2008
Hi,
I€™ve developed a BI system using the SQL Server 2005 Developer€™s Edition.
SSAS, SSIS and SSRS have been added to a SQL Server 2005 Standard Edition Server in preparation for delivering the developed database to this live environment.
So I am able to connect directly to the Database Engine, SSAS, SSIS and SSRS successfully from the actual SQL Server 2005 Standard Edition box which is sat on a Windows 2003 Server operating system.
However when I launch SQL Server Management Studio from a desk top PC which is connected to the SQL Server Standard Edition box I can€™t connect to either SSIS or SSRS, however I can connect to the Database Engine and it also seems that I can connect to SSAS OK.
I am using Windows Authentication where the I used a SQL Server account which exists with €śsysadmin€? permissions and this SQL Server account has the same login name as the Windows Server 2003 desktop login.
What do I do next please?
View 4 Replies
View Related
Nov 8, 2006
I created an SSIS package for a client that does data importing. When I run the pacakge from Visual Studio there is an error window showing all the errors and warnings. A good example of an error is if the import file is in the wrong format.When there is a error or warning can I write the error log to a file OR notify someone of the errors so they can make corrections and rerun the package OR any ideas that the client can find out what went wrong and then make corrections accordingly? Thanks
View 1 Replies
View Related
May 26, 2015
I have table which consists of images. I am trying to export those images to a folder.
declare @path varchar(100)= 'c:images'
SELECT [PICTURE]
,@path+[PICTURE] AS Path
FROM [A].[dbo].[PICTURE]
I am getting this error: The data types varchar and varbinary(max) are incompatible in the add operator.
View 1 Replies
View Related
Apr 9, 2007
Can I access SQL Server 2000 tables via SSIS/SQL Server 2005?
View 1 Replies
View Related
Dec 20, 2007
Sql server agent is running under a domain account that is a member of administrators and domain users amongst others, and the package is executed as the service account. Connecting to servers on the same domain works and when I run it from the msdb package store in ssis (ssis runs under the network service account ...) it will connect to the pop server as well. Permissions, fiddly proxies .. the answer's out there somewhere
View 3 Replies
View Related
