SSIS Unfamiliar Errors VS_NeedSNEWMETADATA

May 2, 2008



Hello rooom,

I tried to execute SSIS package that created by a sql developer contractor.

There are several errors that i am not familiar with:

-Error at Get results to faw file [DTS Pipeline]: input column "" (221) has lineage ID 32 that was not previously used in the Data Flow task.

- Error at Get results to raw file [DTS.Pipeline]: "component "Raw File Destination" (208) failed validation and returned validation status "VS_NEEDSNEWMETADATA".

-Error at Get result to raw file (DTSipeline): One or more components failed validation.

(Microsoft Data TransformationServices VsIntegration).

Can someone guide me since I am consider myself a newbie to SSIS.

Regards,
TJ

View 1 Replies


ADVERTISEMENT

Package Config Errors - VS_NEEDSNEWMETADATA

Oct 4, 2005

Hi everyone,

View 14 Replies View Related

Need Help With VS_NEEDSNEWMETADATA Error

Sep 14, 2007

Hello:
I need some help figuring out the true source of the following error:

"

Executed as user: EPSILONSYSTEM. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 12:53:09 PM Error: 2007-09-14 12:53:09.59 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-09-14 12:53:10.50 Code: 0xC020837F Source: Data Flow Task Source - icsp [1] Description: The data type of "output column "user2" (138)" does not match the data type "System.String" of the source column "user2". End Error Error: 2007-09-14 12:53:10.50 Code: 0xC004706B Source: Data Flow Task DTS.Pipeline Description: "component "Source - icsp" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA". The package execution fa... The step failed."

Reading the error it appears that the issue is with a datatype mismatch with field "user2". It is coming in as a unicode string and being sent into a varchar field. But so are a whole bunch of other userX fields as well. So why is my package having an issue with this specific field. Moreoever the package was running fine until a few days ago and runs successfully in BIDS!

I first figured that the source has changed, as there was some work being performed on the source ERP system. The package had failed a month ago and when I updated the metadata I thought it fixed the problem.

I appreciate your assistance in helping me resolve this issue!

View 9 Replies View Related

VS_NEEDSNEWMETADATA - SECURITY

Jan 22, 2008


I've made a SSIS-package in which I collect SQL-server metadata from different SQL-servers, all SQL2005, same edition.
This package works under the SQLagent account of 1 particular server.(all sql-servers have a different account under which sql-agent runs)
So there is 1 connection which must be changed to connect to the different SQL-servers.
The problem is that I receceive an error VS_NEEDSNEWMETADATA on the OLE-DB datasource which I use to connect to the different sql servers. The fact is that this happens on a stored procedure which is exactly the same on all servers.
So the metadata must be Equal.
The problem must be a security issue, because when I make the account under which the SSIS-package runs sysadmin on all the servers this package works fine.
=> I don't like it to let this account be sysadmin on all SQL-servers.

=> does anyone know which are the strict necessary rights which I must give to this account.

View 6 Replies View Related

Recurring VS_NEEDSNEWMETADATA Error...whats Wrong?

Aug 11, 2007

Hi guys, wonder if you could help.

Ok, basically, my SSIS flow gets data from different excel worksheets and puts in the db.

For some reason its being very incosistent. I fixed all the problems I was having but one component keeps coming up with the [ component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA" ] error.

So, I click on the component, it asks if i want to fix the metadata stuff, I say yes, it fixes it, I run the app, everything's cool.

The I run the app again and again it comes up with this f** error?

Is there anyway SSIS can't just ignore this metadata stuff??

thanks!

View 5 Replies View Related

SSIS Errors!!help

Aug 1, 2007

hi,

I am trying to use SSIS package to trasfer data and hitting road block for



[SQL Server Destination [37]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT' could not be opened. Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server via Windows security.".


How can i resolve this!!

thanks

View 2 Replies View Related

Script Errors In SSIS

Sep 10, 2007

I have been getting a recurring error while running the folowing script from an SSIS package. I have bolded the parts that I think may be of use. I didn't know if this would be a T-SQL or SSIS question, but thanks in advance for help.

Error: 0xC002F210 at Execute SQL Task 1, Execute SQL Task: Executing the query "declare @dbname varchar(200)declare @mSql1 varchar(8000)

DECLARE DBName_Cursor CURSOR FOR
select name
from master.dbo.sysdatabases
where name not in ('mssecurity','tempdb')
Order by name

OPEN DBName_Cursor

FETCH NEXT FROM DBName_Cursor INTO @dbname

WHILE @@FETCH_STATUS = 0
BEGIN
Set @mSQL1 = ' Insert into [tempdb].[dbo].[DBROLES] ( DBName, UserName, db_owner, db_accessadmin,
db_securityadmin, db_ddladmin, db_datareader, db_datawriter,
db_denydatareader, db_denydatawriter )
SELECT '+''''+@dbName +''''+ ' as DBName ,UserName, '+char(13)+ '
Max(CASE RoleName WHEN ''db_owner'' THEN ''Yes'' ELSE ''No'' END) AS db_owner,
Max(CASE RoleName WHEN ''db_accessadmin '' THEN ''Yes'' ELSE ''No'' END) AS db_accessadmin ,
Max(CASE RoleName WHEN ''db_securityadmin'' THEN ''Yes'' ELSE ''No'' END) AS db_securityadmin,
Max(CASE RoleName WHEN ''db_ddladmin'' THEN ''Yes'' ELSE ''No'' END) AS db_ddladmin,
Max(CASE RoleName WHEN ''db_datareader'' THEN ''Yes'' ELSE ''No'' END) AS db_datareader,
Max(CASE RoleName WHEN ''db_datawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_datawriter,
Max(CASE RoleName WHEN ''db_denydatareader'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatareader,
Max(CASE RoleName WHEN ''db_denydatawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatawriter
from (
select b.name as USERName, c.name as RoleName
from ' + @dbName+'.dbo.sysmembers a '+char(13)+
' join '+ @dbName+'.dbo.sysusers b '+char(13)+
' on a.memberuid = b.uid join '+@dbName +'.dbo.sysusers c
on a.groupuid = c.uid )s
Group by USERName
order by UserName'

--Print @mSql1
Execute (@mSql1)

FETCH NEXT FROM DBName_Cursor INTO @dbname
END

CLOSE DBName_Cursor
DEALLOCATE DBName_Cursor
" failed with the following error: "Line 15: Incorrect syntax near '2003'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Execute SQL Task 1

View 4 Replies View Related

SQL 2K5 SSIS DTS.Pipeline Errors

Nov 27, 2006

We have deployed an SSIS package successfully to production. We needed to apply SP1 to fix a different issue and now have encountered a new problem. We have numerous Data Reader Sources in different Data Flow Tasks that connect to a IBM iSeries (DB2) source. Pretty simple extracts that have worked fine in the past. They pump the data into staging tables on the SQL2K5 instance running the package (64-bit).

After we applied SP1 however, all of the Data Reader tasks fail AFTER they successfully copy the records with the following error.

[iSeries Invoice Details [1]] Error: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)

If I delete the source and destination and recreate identical transforms, they work fine, but I don't feel like rebuilding all of the extracts. Any ideas! The problem occurs in all environments that we've tried.

TIA,
Michael Shugarman
P.S. I just tried the SP2 CTP, but that doesn't fix the problem.

View 2 Replies View Related

Handling Errors In SSIS

Sep 20, 2006

When I have an alternet Data Flow in an event handler, caused by a record failing to be inserted due to a unique-key constraint violation, does this increment the number of errors, counting towards the MaximumErrorCount? How can I NOT count it as an error?

The thing is, I need to insert 300,000+ records each day, and some may be duplicates from data already in the table. So I set a unique key constraint on the table, and if during the load, it fails, it will trigger an alernate data flow to load the error records into another table. But if someone tries to load a file that already has been loaded, for example, all the records would be duplicates, which would be equivelant to 300,000+ errors, and I don't want to keep setting the MaximumErrorCount property higher and higher.

Is there any way to treat the error as "being handled" in the dataflow, so therefore doesn't treat it as an error? Or conversely, can I set the MaximumErrorCount property to 0 or -1 to accept all errors, no matter how many?

View 6 Replies View Related

Strange SSIS Errors

Sep 24, 2007



Hello,

I'm getting the following error running a package...

Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message

ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
09/24/2007 15:00:00,Hourly Extract From OReSA,Error,0,INHSCTSTTOMVM82,Hourly Extract From OReSA,(Job outcome),,The

job failed. The Job was invoked by Schedule 7 (Hourly). The last step to run was step 1 (OReSA

Extract).,00:00:59,0,0,,,,0
09/24/2007 15:00:01,Hourly Extract From OReSA,Error,1,INHSCTSTTOMVM82,Hourly Extract From OReSA,OReSA

Extract,,Executed as user: INENVts_hia. hod call failed. End Error Error: 2007-09-24 15:00:58.93 Code:

0xC0047017 Source: dtProduceExtractFiles DTS.Pipeline Description: component "ole_srcExtractDB" (22) failed

validation and returned error code 0xC020801C. End Error Error: 2007-09-24 15:00:58.93 Code: 0xC004700C

Source: dtProduceExtractFiles DTS.Pipeline Description: One or more component failed validation. End Error

Error: 2007-09-24 15:00:58.93 Code: 0xC0024107 Source: dtProduceExtractFiles Description: There were

errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started:

3:00:01 PM Finished: 3:00:58 PM Elapsed: 57.75 seconds. The package execution failed. The step

failed.,00:00:58,0,0,,,,0


But it works on other machines and other SSIS packages are running ok on the offending box.
Any ideas?

Thanks in advance,
Tony.

View 4 Replies View Related

Script Errors In SSIS

Sep 10, 2007

I have been getting a recurring error while running the folowing script from an SSIS package. I have bolded the parts that I think may be of use. I didn't know if this would be a T-SQL or SSIS question, but thanks in advance for help.

Error: 0xC002F210 at Execute SQL Task 1, Execute SQL Task: Executing the query "declare @dbname varchar(200)declare @mSql1 varchar(8000)

DECLARE DBName_Cursor CURSOR FOR
select name
from master.dbo.sysdatabases
where name not in ('mssecurity','tempdb')
Order by name

OPEN DBName_Cursor

FETCH NEXT FROM DBName_Cursor INTO @dbname

WHILE @@FETCH_STATUS = 0
BEGIN
Set @mSQL1 = ' Insert into [tempdb].[dbo].[DBROLES] ( DBName, UserName, db_owner, db_accessadmin,
db_securityadmin, db_ddladmin, db_datareader, db_datawriter,
db_denydatareader, db_denydatawriter )
SELECT '+''''+@dbName +''''+ ' as DBName ,UserName, '+char(13)+ '
Max(CASE RoleName WHEN ''db_owner'' THEN ''Yes'' ELSE ''No'' END) AS db_owner,
Max(CASE RoleName WHEN ''db_accessadmin '' THEN ''Yes'' ELSE ''No'' END) AS db_accessadmin ,
Max(CASE RoleName WHEN ''db_securityadmin'' THEN ''Yes'' ELSE ''No'' END) AS db_securityadmin,
Max(CASE RoleName WHEN ''db_ddladmin'' THEN ''Yes'' ELSE ''No'' END) AS db_ddladmin,
Max(CASE RoleName WHEN ''db_datareader'' THEN ''Yes'' ELSE ''No'' END) AS db_datareader,
Max(CASE RoleName WHEN ''db_datawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_datawriter,
Max(CASE RoleName WHEN ''db_denydatareader'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatareader,
Max(CASE RoleName WHEN ''db_denydatawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatawriter
from (
select b.name as USERName, c.name as RoleName
from ' + @dbName+'.dbo.sysmembers a '+char(13)+
' join '+ @dbName+'.dbo.sysusers b '+char(13)+
' on a.memberuid = b.uid join '+@dbName +'.dbo.sysusers c
on a.groupuid = c.uid )s
Group by USERName
order by UserName'

--Print @mSql1
Execute (@mSql1)

FETCH NEXT FROM DBName_Cursor INTO @dbname
END

CLOSE DBName_Cursor
DEALLOCATE DBName_Cursor
" failed with the following error: "Line 15: Incorrect syntax near '2003'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Execute SQL Task 1

View 5 Replies View Related

SSIS Runtime Errors

Feb 4, 2008



Hi, I'm trying to set up an SSIS which uses a few VB scripts. I'm having an issue with the connections.

I have an existing SSIS which runs a few SQL stored proceedures and this works fine.

The script I am having an issue with returns the following error

'

at System.Data.Common.DbConnectionOptions.ParseInternal(Hashtable parsetable, String connectionString, Boolean buildChain, Hashtable synonyms, Boolean firstKey)

at System.Data.Common.DbConnectionOptions..ctor(String connectionString, Hashtable synonyms, Boolean useOdbcRules)

at System.Data.SqlClient.SqlConnectionString..ctor(String connectionString)

at System.Data.SqlClient.SqlConnectionFactory.CreateConnectionOptions(String connectionString, DbConnectionOptions previous)

at System.Data.ProviderBase.DbConnectionFactory.GetConnectionPoolGroup(String connectionString, DbConnectionPoolGroupOptions poolOptions, DbConnectionOptions& userConnectionOptions)

at System.Data.SqlClient.SqlConnection.ConnectionString_Set(String value)

at System.Data.SqlClient.SqlConnection.set_ConnectionString(String value)

at System.Data.SqlClient.SqlConnection..ctor(String connectionString)

at ScriptTask_dbe60b31acf14201b5f012a4f1c608c2.ScriptMain.GetAppParameterCMD(String strParamaterName) in dts://Scripts/ScriptTask_dbe60b31acf14201b5f012a4f1c608c2/ScriptMain:line 49

at ScriptTask_dbe60b31acf14201b5f012a4f1c608c2.ScriptMain.Main() in dts://Scripts/ScriptTask_dbe60b31acf14201b5f012a4f1c608c2/ScriptMain:line 27

'

connection string is as follows.


ConnectionInfo= "Data Source=SQLM002Cdev;User ID=SQLCallManUser;Initial Catalog=Callmanager;Provider=SQLNCLI.1;Persist Security Info=True;Auto Translate=False;



I have checked the UserID has the correct permissions on the dbo

Any ideas?

View 1 Replies View Related

SSIS Debugging Errors

Jul 20, 2006

Hi All,

I am having a couple of problems with an SSIS package. The first is whenever I add a Data Viewer to one of my data flow tasks it crashes Visual Studio. This happens every single time. I have tried rebooting, but that didn't help. The second error I am getting is whenever I call ComponentMetaData.GetErrorDescription(Row.ErrorCode) from within a data flow script task it generates a "Catastrophic Failure" and indicates that it occurred when calling the GetErrorDescription method. I am not sure if something is corrupted or what the issue is. Does anyone have any insight?

Thanks,

Justin

View 3 Replies View Related

What Errors Normally Should I Log For My SSIS Package?

Oct 16, 2006

I got an SSIS package



that first "truncate the product table" then populate the table with new rows....if there is an error then i will invoke the send email task. However in the "truncate the product table" task, the sql i put "truncate dbo.product" instead of "truncate table dbo.product" but this error is not captured in the text file that I m going to send an email to the appropriate personnel.



Under logging, and when i go into "truncate product table" tasks , "Details", i saw "OnError", "OnWarning" and other error handlers...which should i tick in order for the text file to ONLY show errors I encounteered during the running of the SSIS package?

View 8 Replies View Related

Errors When Trying To Build SSIS Packages

Oct 18, 2007

II am using file system for the SSIS Packages. I have several packages in a project. Most of these packages use configuration files. Infact there are several packages which use the same configuration files. Now when I try to run the build utility, it errors out saying that the name.dtsconfig file already exists. Seems like this is a bug. I would really like to use this utility.I know if the config file is not used in any other pacakge probably the build will not fail. But it is not good practice to have one config file for each package, it is redundancy, does not make sense to that. Is there any way I can use the build and deployment utility without this error.

Please advice.

Thank you.

View 4 Replies View Related

SSIS Package Hanging Without Errors?

Jun 22, 2007

Hi folks,



I have a simple SSIS package I built to migrate data from a SQL db on one server to another SQL db on another server. All it does is: Execute SQL task to disable some triggers on the target table, Data Flow Task to pull the data from the source (a simple sql query) into the destination table (using OLEDB), then another Execute SQL task to re-enable the triggers.



This package ran fine several times during my testing. However, this morning it's not working anymore. When I run it and check its progress, the "Validation has started" is the only thing runs, then nothing else happens... no error messages, no timeouts, nothing in the output window besides "DTS.Pipeline: Validation phase is beginning".



The only thing that has changed is one change to a date in the where clause of my source query, so I'm baffled on why it no longer runs.



I'm pretty new to SSIS, so I could easily be missing something obvious here.



Anyone have any ideas on what's up, or who can point me in the right direction? I'm currently reading up on how to debug and add more comprehensive error handling, in hopes of finding a better description of the problem.



Thanks in advance,

Geoff

View 4 Replies View Related

4 Errors When Using SSIS Scripting Component

Nov 7, 2006



Hi guys, I got these errors when writing a scripting component. Anyone encounteer these errors before?

Warning 1 The dependency 'EnvDTE' could not be found.
Warning 2 The dependency 'Microsoft.SqlServer.VSAHosting' could not be found.
Warning 3 The dependency 'Microsoft.SqlServer.DtsMsg' could not be found.
Warning 4 The dependency 'Microsoft.SqlServer.VSAHostingDT' could not be found.



-Daren

View 4 Replies View Related

Code Page Errors In SSIS

Nov 21, 2007



Hi All,
we have a set of packages which has to to be implemented across differnet environments.
the packages invariable uses OLEDB Source/Destination Components.
In these two components the Code Page Property is not Configurable.
so if the package has to be Deployed in a different environment than,where it is Developed it gives a Validation Error.
Is there a Workaround for this problem.
if anybody have faced the problem earlier,please post it.
thanks in advance.
cheers
srikanth

View 1 Replies View Related

SSIS Email Timeout Errors

Aug 15, 2007

I continue to receive intermittent timeout errors from the SendMail task in my SSIS packages. I know that the SMTP server I am connecting to is often slow to respond to due other business needs, so my question is what property is available to increase the waiting period before a tiemout occurs with the SendMail task. I have not found a property in the task that allows me to say, wait 120 seconds for the SMTP server before throwing a timeout error.

Any thoughts?

Thanks in advance.

Mike

View 1 Replies View Related

SSIS Job Is Running With No Errors, But Doesn't Do Anything

Oct 4, 2007

I have a SSIS package that I have scheduled to run (under SQL Server Agent jobs) and when I check its history, it shows it being invoked regularly, and with no errors. The problem is, nothing is actually happening. I can load up the job in MS Visual Studio, and run it, and it runs fine, and takes care of the data transfer. The data is not getting transferred when it runs as a job under SQL Server Agent though the logs show that job was run, and completed with no errors.

I have another package that is similarly configured and does run correctly, and I have been checking the two packages to see what the difference in configuration is, but I don't see anything. All the package in question is, is a single foreach container that gets all the files in a directory, adds them as flatfiles to a database, and then moves them to an archiving directory.

View 3 Replies View Related

Errors Deploying An SSIS Package

Feb 14, 2007

Hi All,

I hope someone can help becuase this problem is issue us several headaches.

We are currently trying to deploy an SSIS package to a production server. The deployment goes fine, the package runs ok when executed manually. The issues start when we try and execute it under the SQL agent.

Having gone back to the drawing board and spent much of the day reading various articles and applying the various options (especially those within the MS KB article 918760), we are still no closer to a resolution.

The SSIS package was created under an Administrator, and the SQL agent runs under a different Domain Admin account.

When we set up the Schedule to read from SQL Server or the SSIS Store the standard "Executed as user: DOMAINUSERNAME. The package execution failed. The step failed" in the history.

We tried to create the package as a file access and now get "Package could not be found" even though you can browse to i in the schedule list. The Domain account as full access to the folder where the package resides.

Has anyone else come across this issue, or have a workable solution?

Many TIA.













View 6 Replies View Related

SSIS Errors During Connection To Pervasive V9.11

May 23, 2007

We just upgraded our accounting packages database from Pervasive 8.1 to V9.11. MY SSIS extract packages were working just fine. Now I am getting several erros stating that some columns cannot be found:



For example, in the [sysdtslog90] table, I have these errors:



Column "CreditLimitAmt" cannot be found at the datasource. or

Column "RsrvRptky" cannot be found at the datasource. (from a different pkg)



The table schemas did not change, the columns still exist. The SQL I use also runs just fine in the client interface.



Has anyone experienced this? The bottom line is that now the extract packages are broken.



TIA.

View 7 Replies View Related

SSIS - Can Not Trap Package Task Errors

Jan 29, 2007

I have an SSIS package that fires an OnTaskFailed event whenever any of my tasks fail.
I would like to put any SSIS task failure message into a user defined variable.
Any idea how to do this?
Any help appreciated.
Regards,
 Paul.

View 1 Replies View Related

Anyone Else Have Errors When Checking Out SSIS Package From SourceSafe Or TFS?

Aug 10, 2007

I get errors when I check out an SSIS package from source control (both Source Safe and TFS) relating to the connection objects where I was not the original developer who checked it in. Is there a solution to this other than altering the connection loginpassword for every connection object in the package before deploying?

View 4 Replies View Related

Errors From Training Mining Models In SSIS

Jul 2, 2007

I am in the process of creating an Integration Services package to automate the process of training mining models and getting predictions. Until recently, I have been processing the models directly from Business Intelligence Studio without any problems. However, when I try to use the exact same training set as an input to the Data Mining Model Training destination, I get several errors. Here is the output:


[Mining Models [1]] Error: Parser: An error occurred during pipeline processing.
[Mining Models [1]] Error: Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
[Mining Models [1]] Error: Errors in the OLAP storage engine: An error occurred while the 'CPT MODIFIER' attribute of the 'BCCA DMS ~MC-CLAIM LIN~5' dimension from the 'BCCA LRG DMS TEST' database was being processed.
[Mining Models [1]] Error: File system error: The record ID is incorrect. Physical file: . Logical file: .
[Mining Models [1]] Error: Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
[Mining Models [1]] Error: Errors in the OLAP storage engine: An error occurred while the 'BILL TYPE' attribute of the 'BCCA DMS ~MC-CLAIM LIN~5' dimension from the 'BCCA LRG DMS TEST' database was being processed.
[Mining Models [1]] Error: File system error: The record ID is incorrect. Physical file: . Logical file: .
[DTS.Pipeline] Error: The ProcessInput method on component "Mining Models" (1) failed with error code 0x80004005. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.



I have not been able to find an answer as to why this is happening. I found a post regarding a similar problem with processing an OLAP cube in SSIS, but it seems that the author of that post never found an answer. Has anyone else here seen similar errors when processing mining models from Integration Services?



Also, if I process the mining models manually then try to run only predictions in SSIS, I get many of the same errors. I'll keep looking into the problem myself, but I would be very grateful if someone in this forum could shed some light on this issue.

View 4 Replies View Related

Integration Services :: How To Handle Errors In SSIS

Oct 30, 2015

I am trying to handle errors occurred in SSIS package.

I have created flat file destination task in Data flow to handle the error records,configured the output columns with redirect row option.I am getting below error when I execute the package.

Error: 0xC0202009 at DTSTask_DTSDataPumpTask_2, OLE DB Source [1]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.An
OLE DB record is available.  Source: "Microsoft OLE DB Provider for SQL Server"  Hresult: 0x80004005  Description: "The statement has been terminated.".An OLE DB record
is available.  Source: "Microsoft OLE DB Provider for SQL Server"  Hresult: 0x80004005  Description: "Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.".

Package execution is stopping and none of the error records are logged in the error file task.

View 3 Replies View Related

DTS To SSIS Conversion (ActiveX Script Has Compilation Errors)

Oct 12, 2015

I am re-writing old DTS packages(from sql 2005) to convert them to SSIS packages(sql 2014) and in one of the script task, the old activex script does not run.

The script is :

'************************
' Visual Basic ActiveX Script
'************************
Function Main()
mydate = now()
yrs = ""
mth = ""
mth = Month(mydate) - 1
yrs = Right(Year(mydate), 4)
If Month(mydate) = 1 Then mth = "12"

[code].....

Not sure how to proceed forward? I am quite new to package migration

View 0 Replies View Related

Catching Errors In SSIS Backup Database Task

Aug 28, 2006

Hi,

In my SSIS package, I have a backup database task. When I run the package with DestinationAutoFolderPath set to a folder ("Network Service" account has full permission on this folder) and DestinationCreationType set to Auto, the task works just fine creating a backup with its own name. (similar to database_date<count>).

But what I want is in my front-end I am allowing the user to specify the name of the backup file. So I want the task to create the backup file in the name I supply. I set the DestinationCreationType to manual and in the application code added the DestinationManualList with the path from the UI.

Now the pacakge runs fine but does not take any backup. There is no errors as well. If I set the FailPackageOnFailure and FailParentOnFailure to true, then I am getting the DTSExecResult.Failure but I am not getting the actual error from the backup database task.

Am I missing anything here?

Thanks in advance,
Srikanth.

View 4 Replies View Related

Errors While Running Ssis Packages From The Command Prompt.

Dec 23, 2005

I have created ssis package. It has been successfully running at UI level.

But when i am trying to execute it from the command prompt by using dtexec utility it is showing the following error messages.

Error: 2005-12-23 17:01:57.67
   Code: 0xC00470FE
   Source: Data Flow Task DTS.Pipeline
   Description: The product level is insufficient for component "Flat File Source" (1).
End Error
Error: 2005-12-23 17:01:57.67
   Code: 0xC00470FE
   Source: Data Flow Task DTS.Pipeline
   Description: The product level is insufficient for component "Script Component" (9).
End Error


i have entered the command as follows.

dtexec /f "c:somefolderpackage1.dtsx"

 

Any points regarding this issue would be helpful.

 

View 7 Replies View Related

How To Force A SQL Server Job To Always Succeed Even When SSIS Packages Have Errors

Jan 11, 2008


I have added an email task to the ON Error Event of my SSIS package, so that I will always know when there are errors.
However I would like the SQL Server job executing the package to succeed even if the package fails.
What setting do I change in the SSIS packageto achieve this? MaximumErrorCount?




View 1 Replies View Related

Importing Data And Script-processing Errors In SSIS

Mar 18, 2008

I'm currently trying to pull data from a ProvideX database and replicate it in a collection of SQL Server tables. However, I'm having a heck of a time trying to convert some strange decimals stored by the ProvideX database. As an example of the data I'm trying to retrieve, I'll see something like [. 1] or [. 1] ([]'s are to show the bounds of the field). After analyzing the data, it seems the decimal in the field represents a 1,000 placeholder. Thus [. 1] really means 1, and [. 1] really means 10. Something like .100 would be 100. 6.500 would be 6500.

As you can imagine, the spaces are causing errors when trying to pull the data, and I can't for the life of me figure out to just pull it as a string, run a script to convert it to a correct number, and then save the transformed data into SQL Server. When running the import wizard, it seems I'm being forced to pull these columns as decimals. Currently I'm trying to just pull the data out "as is" and throw it in a raw file, to be processed out of SSIS. Obviously doing it all within SSIS would be ideal, but if that can't be done, I'll do whatever it takes. I should also say I'm new to SSIS packages, but not necessarily new to SQL Server or SQL in general.

1) How can I pull these columns as strings? If I try to change the Export columns in the source query data flow step, it gives me an error saying that I can't do that.

2) If I have to pull as decimals, how can I capture the row on error, process it, and send it back to the export? So far, when I get an error, I lose all information in the row to the right of and including the error field.

I appreciate any responses, as I'm kind of going in circles at this point. If this sort of thing has been discussed here prior, I apologize...I didn't find it in any searches I did. Please just point me in the right direction if you've dealt with this sort of problem before. It seems to me that it should be an easy thing to do. I'm just not finding any tutorials on it.

View 14 Replies View Related

SSIS Package Step Errors And Logs From SQL Job Agent?

Mar 28, 2007

I've deployed an ssis package to the database server through the manifest file over the network..



The package runs great when testing through vs.net on my client.



I've added the package to a job step in the sql server job agent.



When I test the new job, the package step fails, but there is no error or log information in the job history.



Wwhere can I get error information? And/or How can make SSIS error information more verbose in the job history?



Thanks for any help or information.

View 6 Replies View Related

Send Mail Task In SSIS Weird Errors

Aug 31, 2006

Hey there all,



i am having a weird problem with the send mail task in SSIS. I have tried to different things, and i end up with two different errors:



Firstly, i have setup a data dump to excel, and the send mail taks emails this to specific email addresses.

In the Send mail task i have validated to SMTP server, and its correct.

I have manually entered all the information in the Send mail task, and i am sending to multiple email addresses. These are all seperated by a semi colan. I run the task and it fails on the send mail task with the follwoing error:

Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Unable to send to all recipients.".

Task failed: Send Mail Task

I have validated all the email address and they are correct. I did some searching and someone suggested to replace the semi colan with a comma. I do this and i get the follwoing error"

Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Mailbox unavailable. The server response was: 5.7.1 Unable to relay for rpwallis@bigpond.com.au".

I have checked that the IP for the SQL server is on the list of allowed relays on our exchange server. Does it make a difference if i am running this from Visual studio on my laptop?? by this, does it pick up the ip of my laptop when i test this or does it use the ip address of the server?? This would explain the relay message error if so..



Could someone please explain if i should use comma's or semi colans to seperate email addresses? and also lead me in the right direction in relatio to my problems..



Many thanks in advance



Scott Lancaster

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved