I'm looking to return certain rows from our db into an SSRS based on a user selected date range using the parameters calendar.
My query/analyzer returns all required fields/rows, but how do I
pull the specific rows, (that are based on a date range that the user enters),into the report? I've tried expressions, and vb functions to no avail. The users will be using the calendar parameter to select date ranges .So far the reports pull in all rows from my query.
I'm a SQL newbie, and I'm trying to write a report that returns records based on a beginning and end date that the user supplies. But when I run the query and supply the dates (begin 11/29/2007 / end 11/30/2007, for example), I'm only getting back one record, when there should be at least 3. It appears that my query is ignoring the =, and only returning those records that have a date > or <, not <= or >=.
I was told that it's possible that the time needs to be converted to UTC as well, but I'm not sure how to do that ( I tried, but I really don't know what I'm doing so I commented it out)... Can someone offer some guidance on how to get all the records to show up? I've pasted my query below, thanks in advance!
FilteredContact.new_referred_by, convert(varchar(10),FilteredContact.createdon,101) as Date--, SELECT GETDATE(FilteredContact.createdon) AS CurrentTime, GETUTCDATE(FilteredContact.createdon) AS UTCTime
Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.
I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?
In the report I'm working on, I want to display a list of the parameters selected by the user, as in:
Selected Cars: Toyota Camry Ford Taurus Chevy Corvette Saturn Ion
Note that these are selected items from a multi-value parameter. How can I go about doing this with Reporting Services 2005? In ASP.NET, I'd just use the parameter array as the datasource for a repeater/datagrid/gridview. Could I do something similar with SSRS? I'd really like to use the format specified above, whether or not it is in a table; I really don't want to do the following:
Selected Cars: Toyota Camry, Ford Taurus, Chevy Corvette, Saturn Ion.
I have 2 MultiValued Parameters in my reports, our of which first is dependent on the other.
Eg. I have a SubProductGroup Parameter and depending upon the value selected in SubProductGroup, the other parameter which is Product gets filled in combo box.
Both these parameters are MultiValued and I am having "Select ALL" option in both the combo box.
Now, whenever you select any SubProductGroup values, the Dataset for Product gets executed to fill the Product combo box.
The MultiValued Parameters works using the "IN" Clause. All those products are retrieved which are "IN" the selected SubProductGroup.
Whenever user selects "Select All" option for SubProductGroup, there is no need for this "IN" clause, because we actually need all the records for Product.
Similarly, I have the Main Dataset which retrieves the Sales data for the Products selected from the Combo Box. So, the same question arises there also.
Right now I am using STRTOSET( ) and Join( ) function and this is working fine for me.
But when User Selects "Select All" in SubProductGroup, it takes a long time to fill the combo box for Product as well as when user selects "Select All" for Product, it takes a long time for the actual Dataset to retrieve records. But its working fine.
In order to improve the Performance, I am trying to eliminate this IN clause when "Select All" is selected.
I am producing a report in Report Builder 2 containing a chart and table. The user is able to select single or multiple choices on a parameter called Specialty. My present chart is only suitable when one Specialty is selected. Therefore I only want this to be visible when the user has selected one Specialty. I am planning to create a second chart which is suitable for than more than one selection. So if the user selects more than one Specialty the existing chart will not be visible and instead will be replaced by the second.I think this should be done using Chart Properties>Visibility but cannot develop the logic of the expression.
I've been running into this issue quite a few times, and have been unable to solve it through reading various posts/forums. Here is the issue
Software Details: Datawarehouse Database - SQL Server 2008 R2 Reporting Services Version - SSRS 2008 R2 Development Environment - Visual Studio 2008 Problem Details:
I have been writing reports based of a Relational Datamart with dimensions and facts. The report in question uses dimensions for parameters and facts for content. Multi valued parameters are enabled in the report query by using the 'IN(@Paramenter)' statement within the report query. It has a total of 6 multi-value parameters. I assign the same available values from dimension datasets for each parameter to it's default parameter. Theoretically all the values in the option lists should be selected after first render. This is not always the case.
Example: SELECT * FROM dbo.MyTable WHERE TableColumn0 IN (@Parameter0) AND TableColumn1 IN(@Parameter1) AND ....N (continue syntax to 6 multi valued parameters)
Some of the multi-value drop down lists are defaulting to have every value selected, and some are not. The problem is I need to know why some parameters are not selecting all by default when specified.
I have requirement where first I need to show only one report parameter. Based on user selection I need to prompt or show the user another report parameter.
Say suppose I have 3 parameters. User selects first value in first parameter I should not show the other 2 parameters. If user selects second value in first parameter I should show second parameter and hide third parameter. There is no relationship between these 2 parameters except user selection. Similarly if user third value in first parameter then I should show third parameter and hide second parameter.
Is this possible? I can not see any Visible property for report parameters.
I am working on Sql server Reporting Services(Sql Server 2005),
i have designed a Report and deployed that report on Report Server, on this report i need to show the user selected values in page header by using Parameters which i have already created in the Report.
There are 35 to 40 fields in the Front End(Asp.net2.0)
on passing all these values from front end Report is prompting for parameters which is not desired for my case even though i have made ShowParameterPrompts to false.
I am creating a report where there are 3 tables in one report which have visibility set as an expression so that when a certain criteria is selected in the "Report" parameter, a different table is shown below. This works as expected.
When table 3 is shown, I want a new parameter to be visible to the user called "Ward" where the user will select the ward they are interested in and the table will display data below just for the ward selected. However, I don't want the ward parameter visible when either of the other 2 options are selected. Is this possible and how to do this?
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
I have sales from 2010 to today in my cube. my question is i want to see sales amount from 2010 to 2014 if i select 2014. or if I select 201405 ( may 2014), i want to see sales from 20100101 to 20140531. same with date. basically i want to to al the sales til the date/month /year selected. how can i achieve this?
i have written a sql function which returns only number of working days (excludes holidays and Weekends) between given StartDate and EndDate.
USE [XXX] GO /****** Object: UserDefinedFunction [dbo].[CalculateNumberOFWorkDays] Script Date: 10/28/2015 10:20:25 AM ******/ SET ANSI_NULLS ON GO
[code]...
I need a function or stored procedure which will return the date which is 15 working days (should exclude holidays and Weekends) prior to the given future Date? the future date should be passed as a parameter to this function or stored procedure to return the date. Example scenario: If i give date as 12/01/2015, my function or stored procedure should return the date which is 15 working days (should exclude holidays and Weekends) prior to the given date i.e 12/01/2015...In my application i have a table tblMasHolidayList where all the 2015 year holidays dates and info are stored.
Using SSRS 2008 r2...I have a report with a single-value parameter and three multi-value parameters, Class1, Name2 and Name3. I'm hoping for an explanation to one thing that I'm seeing and information on a second thing.
Class1 and Name2 both have the (Select All) parameter selected but Class1 is displaying the concatenated parameter variable list whereas Name2 is showing Null. Why is that? If anything, how can I get Class1 to be similar to Name2 and show Null?But my desired wish is to have Class1, Name2 and Name3 display the text"All Selected" when the parameter (Select All) is chosen.
I have created a Transactional Replication Publication on my SQL 2012 server.When I log into another server on the domain running 2008R2 and try to subscribe to the 2012 Publication, I get the following error when clicking on "Add SQL Server Subscriber": "The selected Subscriber does not satisfy the minimum version compatibility level of the selected publication"
The 2012 DB is set as 2008 Compatibility Mode?Am I not able to Publish from 2012 to 2008?.I was using SSMS 2008 to connect to my 2012 Instance, thats why it didn't work...
I am having a problem with the RS utility not recognizing my query parameters that I am passing to my timed subscription. I have set up my report with a "WorkOrder" parameter. I have created a trigger that causes my subscription to fire, and that trigger passes in the workorder number to the utility. The subscription fires successfully, but I am getting a blank report.
I set the parameter value to "can be blank" so that I could create my subscription w/o an error. I know that my subscription id is correct when I use the fire method, because I DO get the appropriate report.
I am also having the same problem when I actually log in to the report server and execute the utility from the command line. I believe my report is good. Once the report is generated, I am able to follow my URL, plug in the workorder id, and it works.
What would cause the variable not to be passed in/recognized? This is how I am calling it from the command line:
i am inserting into a table using the sqlCommand parameters property.for example i do :sqlCmd.Parameters.Add("@date_birth_hebrew", Request("date_birth_hebrew"))the date_birth_hebrew is not a must and has allow null value in the db.when the user submits the form and leaves the textbox of date_birth_hebrewnot field out and i try to add this value to parameters as the above code i recive :Prepared statement '(@date1 datetime,@first_name nvarchar(4000),@last_na' expects parameter @date_birth_hebrew, which was not supplied. as i understand beacuse the Request("date_birth_hebrew") is empty the sqlCommand.Parameters acts as no value entered.i hae solved this problem by on each value checking thatif Parameters Request("date_birth_hebrew")="" thensqlCmd.Parameters.Add("@date_birth_hebrew", "")but isnt there any another way?thnaks in advancepeleg
I have 9 parameters which all have defaul values and 1 that does not, 4 of them show the correct default but 5 of them state <Select a Value>.
I have copied the report project to another pc and the same problem occurs.
I have tried deleting 'reports' and 'reportserver' from iis and recreating them, as well as deleting the actual report from http://localhost/Reports/Pages/Folder.aspx [then selecting 'show details' and deleting and redeploying the report].
I have even tried toggling the default values on/off. I am at a loss, I can only think that the report project file(s) need to be manually amended in some way. There is nothing significantly different between the parameters to justify them not defaulting
I'm passing a parameter to a stored procedure stored on my sqlserver, or trying to atleast. And then firing off the update command that contains that parameter from a button. But it's not changing my data on my server when I do so. I'm filling a dropdown list from a stored procedure and I have a little loop run another sp that grabs what the selected value should be in the dropdown list when the page loads/refreshes. All this works fine, just not sp that should update my data when I hit the submit button. It's supposed to update one of my tables to whatever the selected value is from my drop down list. But it doesn't even change anything. It just refreshes the page and goes back to the original value for my drop down list. Just to make sure that it's my update command that's failing, I've even changed the back end data manually to a different value and on page load it shows the proper selected item that I changed the data to, etc. It just won't change the data from the page when I try to.
This is what the stored procedure looks like: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ALTER PROCEDURE [dbo].[UPDATE_sp] (@SelectedID int) AS BEGIN UPDATE [Current_tbl] SET ID = @SelectedID WHERE PrimID = '1' END ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ And here's my aspx page: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ <%@ Page Language="VB" AutoEventWireup="false" CodeFile="Editor.aspx.vb" Inherits="Editor" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Data Verification Editor</title> </head> <body> <form id="form1" runat="server"> <asp:SqlDataSource ID="SQLDS_Fill" runat="server" ConnectionString="<%$ ConnectionStrings:Test %>" SelectCommand="Current_sp" SelectCommandType="StoredProcedure" DataSourceMode="DataSet"> </asp:SqlDataSource> <asp:SqlDataSource ID="SQLDS_Update" runat="server" ConnectionString="<%$ ConnectionStrings:Test %>" SelectCommand="Validation_sp" SelectCommandType="StoredProcedure" DataSourceMode="DataReader" UpdateCommand="UPDATE_sp" UpdateCommandType="StoredProcedure"> <UpdateParameters> <asp:ControlParameter Name="SelectedID" ControlID="Ver_ddl" PropertyName="SelectedValue" Type="Int16" /> </UpdateParameters> </asp:SqlDataSource> <table style="width:320px; background-color:menu; border-right:menu thin ridge; border-top:menu thin ridge; border-left:menu thin ridge; border-bottom:menu thin ridge; left:3px; position:absolute; top:3px;"> <tr> <td colspan="2" style="font-family:Tahoma; font-size:10pt;"> Please select one of the following:<br /> </td> </tr> <tr> <td colspan="2"> <asp:DropDownList ID="Ver_ddl" runat="server" DataSourceID="SQLDS_Update" DataTextField="Title" DataValueField="ID" style="width: 100%; height: 24px; background: gold"> </asp:DropDownList> </td> </tr> <tr> <td style="width:50%;"> <asp:Button ID="Submit_btn" runat="server" Text="Submit" Font-Bold="True" Font-Size="8pt" Width="100%" /> </td> <td style="width:50%;"> <asp:Button ID="Done_btn" runat="server" Text="Done" Font-Bold="True" Font-Size="8pt" Width="100%" /> </td> </tr> <tr> <td colspan="2"> <asp:Label runat="server" ID="Saved_lbl" style="font-family:Tahoma; font-size:10pt;"></asp:Label> </td> </tr> </table> </form> </body> </html> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ And here's my code behind: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Imports System.Data Imports System.Data.SqlClient Partial Class Editor Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load Saved_lbl.Text = "" Done_btn.Attributes.Add("OnClick", "window.location.href='Rpt.htm';return false;") Dim View1 As New DataView Dim args As New DataSourceSelectArguments View1 = SQLDS_Fill.Select(args) Dim Row As DataRow For Each Row In View1.Table.Rows Ver_ddl.SelectedValue = Row("ID") Next Row SQLDS_Fill.Dispose() End Sub Protected Sub Submit_btn_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit_btn.Click SQLDS_Update.Update() Saved_lbl.Text = "Thank you. Your changes have been saved." SQLDS_Update.Dispose() End Sub End Class ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When I debug my code I see the string going into the parameter correclty, but the the delete statement doesnt work and I'm not sure why. Does this look ok? // Set up SqlCommand, connection to db, sql statement, etc. SqlCommand DeleteCommand = new SqlCommand(); DeleteCommand.Connection = DBConnectionClass.myConnection; DeleteCommand.CommandType = CommandType.Text;
// Store Primary Key photoID passed here from DeleteRows_Click // in a parameter for DeleteCommand SqlParameter DeletePrimaryKeyParam = new SqlParameter(); DeletePrimaryKeyParam.ParameterName = "@PhotoID"; DeletePrimaryKeyParam.Value = photoID.ToString();
// Insert new parameter into command object DeleteCommand.Parameters.Add(DeletePrimaryKeyParam);
// Delete row, open connection, execute, close connection DeleteCommand.CommandText = "Delete From Photo_TBL where PhotoID IN (@PhotoID)"; Response.Write(DeleteCommand.CommandText); // DeleteCommand.Connection.Close(); DeleteCommand.Connection.Open(); DeleteCommand.ExecuteNonQuery(); DeleteCommand.Connection.Close();
I'm using the following code (created by Report Designer) to populate the From and To data controls in my report;
WITH MEMBER [Measures].[ParameterCaption] AS '[Check Date].[Date].CURRENTMEMBER.MEMBER_CAPTION' MEMBER [Measures].[ParameterValue] AS '[Check Date].[Date].CURRENTMEMBER.UNIQUENAME' MEMBER [Measures].[ParameterLevel] AS '[Check Date].[Date].CURRENTMEMBER.LEVEL.ORDINAL' SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , [Check Date].[Date].ALLMEMBERS ON ROWS FROM [MyCube]
The report parameters for From and To contain a first item of 'All' which I don't want. How can I remove this please?
I am currently working with 3 multi-valued parameters whose data sources are queries. The first 2 are required to have entries, 100% of the time, but the third one may or may not require selecting a value. Parm3's data source is filtered by the selections of Parm1 & Parm2. The data source for my report references Parm3 in a derived table that is then LEFT OUTER JOINed.
In the cases where the report does not require any selection from Parm3 I am still required to pick at least 1 entry. Can anyone shed some light on this, or provide a solution so I am not forced to pick any if I don't want?
The foolowing code I cannot seem to get working right. There is an open connection c0 and a SqlCommand k0 persisting in class.The data in r0 is correct and gets the input arguments at r0=k0->ExecuteReader(), but nothing I do seems to get the output values. What am I missing about this?
I have created two report parameters and want them as Cascading. District Parameter depends on Region Parameter which should allow Multi selection. When I select single value in Region it works perfectly. But when I choose multiple values, District turns out to be a blank text box. I have used the In clause in my code :
Hi;I'm here for many hours trying to do this but i couldn't find a way.I have a table whith a field called [DOB], where i have people's date of birth. Now, i need a SQL query to get people who's birthdays are in between two dates "BUT", what about the year on the date? I use to do this on Access: SELECT * FROM Members WHERE DATESERIAL(YEAR(NOW()), MONTH(DOB), DAY(DOB)) BETWEEN @startDate AND @endDate In the query above the year is not a problem because the DateSerial() function add the current year for all birthdates making it easyer to user parameters like: 06/01/2006 to 06/30/2006 Unfortunately, SQL Server does not support DateSerial() function. I appreciate any help on this. Thanks a lot.
Hello Everyone and thanks fo ryour help in advance. I am working on a blog site that stores each blog entry in a SQL Server table. Each entry is date stamped with the time it is created in a datetime field called "TimeCreated". I want to be able to create some type of ability to sort the older blogs as an archive and display links on a pages such as "Archive - January 2007, Archive - December 2006" etc. I'm not exactly sure on how to go about doing this. any help on this topic would be greatly appreciated.
I have a problem with a SQL that check if a date column IS NULL. On one server the check work ok but on another (the same data is on both - restored copy) the check does not find any NULL values. If check where datecolumn =convert(datetime,'9999-12-31 23:59:59.000',121) I get the same result as when checking for NULL in the other.
Is there any parameter set somewhere that tell the server to return a value even if NULL is stored in the database?
Hey Guys, I can’t get this date conversion stuff to work. I have a variable that holds the current date -1 day (@Yesterday). The date that is on the table (DTE) is in the format yyyymmdd (i.e. 20021213), but I cannot get the date to convert.
I have tried: BEGIN DECLARE @Yesterday as nvarchar (8);
I need to calculate a date.example it needs to be 20 working days ago compared to today so that means it needs to not include any Saturday or Sunday in between
declare @start_date datetime declare @end_date datetime declare @working_days int set @working_days = 20
[code]...
So I need to calculate @start_date but it needs to exclude any weekend days.@working_days is the number of working day I'm interested in.
Hello,I am importing data that lists rates for particular coverages for aparticular period of time. Unfortunately, the data source isn't veryclean. I've come up with some rules that I think will work to clean thedata, but I'm having trouble putting those rules into efficient SQL.The table that I'm dealing with has just under 9M rows and I may needto use similar logic on an even larger table, so I'd like somethingthat can be made efficient to some degree using indexes if necessary.Here is some sample (simplified) code:CREATE TABLE Coverage_Rates (rate_id INT IDENTITY NOT NULL,coverage_id INT NOT NULL,start_date SMALLDATETIME NOT NULL,end_date SMALLDATETIME NOT NULL,rate MONEY NOT NULL )GOINSERT INTO Coverage_Rates VALUES (1, '2004-01-01', '2004-06-01',40.00)INSERT INTO Coverage_Rates VALUES (1, '2004-03-01', '2004-08-01',20.00)INSERT INTO Coverage_Rates VALUES (1, '2004-06-01', '2004-08-01',30.00)INSERT INTO Coverage_Rates VALUES (2, '2004-01-01', '9999-12-31',90.00)INSERT INTO Coverage_Rates VALUES (2, '2004-03-01', '2004-08-01',20.00)INSERT INTO Coverage_Rates VALUES (2, '2004-08-01', '2004-08-01',30.00)GOThe rule is basically this... for any given period of time, for aparticular coverage, always use the coverage with the highest rate. So,given the rows above, I would want the results to be:coverage_id start_dt end_dt rate----------- ---------- ---------- --------1 2004-01-01 2004-06-01 40.001 2004-06-01 2004-08-01 30.002 2004-01-01 9999-12-31 90.00There can be any combination of start and end dates in the source, butin my final results I would like to be able to have only one distinctrow for any given time and coverage ID. So, given any date @my_date,SELECT coverage_id, COUNT(*)FROM <results>WHERE @my_date >= start_dtAND @my_date < end_dtGROUP BY coverage_idHAVING COUNT(*) > 1the above query should return 0 rows.Thanks for any help!-Tom.
