While looking forward to design a multi-columnar cross-tab query I am anxious to know if there could be a way to change the default names of the pivot columns? In other words for the query like the following can there be a way to apply anAS type command to reflect some other names, instead of having the four dates in heading? Something like Month_A, Month_B?
SELECT * FROM (SELECT X.REP_DT, X.CUST_ID AMOUNT_1 FROM X) P PIVOT (SUM(AMOUNT_1) FOR REP_DT IN ([2014-12-31], [2015-01-31], [2015-02-28], [2015-03-31])) PVT_01
Below. I have also pasted the current result of this query and the desired result.
Query can be updated to get the desired result as given below?
Query: Select c.OTH_PAYER_ID, c.PAID_DATE, f.GROUP_CODE, f.REASON_CODE, f.ADJUSTMENT_AMOUNT From MMIT_CLAIM_ITEM b, mmit_tpl c , mmit_attachment_link d, MMIT_TPL_GROUP_RSN_ADJ f where b.CLAIM_ICN_NU = d.CLAIM_ICN and b.CLAIM_ITEM_LINE_NU = d.CLAIM_LINE_NUM and c.TPL_TS = d.TPL_TS and f.TPL_TS = c.TPL_TS and b.CLAIM_ICN_NU = '123456788444'
Current Result which I am getting with this query
OTH_PAYER_ID PAID_DATE GROUP_CODE REASON_CODE ADJUSTMENT_AMOUNT 5501 07/13/2015 CO 11 23.87 5501 07/13/2015 PR 12 3.76 5501 07/13/2015 OT 32 33.45 2032 07/14/2015 CO 12 23.87 2032 07/14/2015 OT 14 43.01
Desired/Expected Result for which I need updated query
Here with the below query iam binding my gridview with industry name,company name,Plant Name,Group Name related to the IDs in Audit table.Select Aud.Ad_ID_PK,Aud.Audit_Name,Ind.Industry_Name,Cmp.Company_Name,Pla.Plant_Name,Gr.Groups_Name,Aud.Audit_Started_On,Aud.Audit_Scheduledto,Aud.Audit_Created_On from Industry Ind, Company Cmp, Plant Pla, Groups Gr, Audits Audwhere Ind.Ind_Id_PK =Aud.Audit_Industry and Cmp.Cmp_ID_PK =Aud.Audit_Company and Pla.Pl_ID_PK =Aud.Audit_Plant and Gr.G_ID_PK =Aud.Audit_Group and Ad_ID_PK in (select Ad_ID_PK from Audits) Now i want to edit these names. when i click on edit in gridview these names will be filled into textboxes and when i change the names it should compare the name with particular tables and should get the Id of that and store in Audits table. For example: i have this data in my audits table:
Commercial83312
2 2 2 1 Here Commercial83312 is ID of that Audit and 2,2,2,1 are the Industry,Company,Plant and group Ids for that particular audit.In the front end i can see the names of this particular IDs. when i edit the industry name in the UI it must check the name with industry table and get the ID of the changed name and store it in audit table. so the data may be changed in audits table as :
Commercial83312
4 2 2 1
so here the industry ID is changed I need the stored procedure for this. please help me,its very urgent...
Hi, I need do get a columns names from a table? How to do this in pure SQL? I thought about creating a stored procedure or user function with a result of a string ( col1name,col2name ....) I do not know how to count the number of columns in a specyfied table? Any help would be appreciated. Thanks in advance. magicxxxx
SELECT TOP 100 text, query_plan, cp.plan_handle, qs.last_execution_time FROM sys.dm_exec_cached_plans cp CROSS APPLY sys.dm_exec_sql_text(cp.plan_handle) CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle) JOIN sys.dm_exec_query_stats qs ON cp.plan_handle = qs.plan_handle WHERE objtype='Adhoc'
I have below output:
Text Query_plan Plan_handle Lst_execution_time Select id,name from person <Showplan... dshkkgdaHqrqe13232423 2015-07-21 10:50:22.713 Update customer set Cid=3 where name='abc' <Showplan... poasfvrqe13232423 2015-07-21 10:16:22.500 delete from orders where ORid=8 <Showplan... 2ase2423 2015-07-21 10:10:22.710 Select 1,2,3,4,5 from num <showplan afqfqfq 2015-07-21 10:10:22.710
I am looking for
Text Query_plan Plan_handle Last_execution_time TabName colname Select id,name from person <Showplan... dshkkgdaHqrqe13232423 2015-07-21 10:50:22.713 Person Id, name Update customer set Cid=3 where name='abc' <Showplan poasfvrqe13232423 2015-07-21 10:16:22.500 customer Cid, name delete from orders where ORid=8 <Showplan... 2ase2423 2015-07-21 06:10:22.710 Orders ORid Select 1,2,3,4,5 from num <showplan afqfqfq 2015-07-21 10:10:22.710 nUM 1,2,3,4,5
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.* FROM PRODUCT A CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.* FROM PRODUCT A CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
I don't know why this is so difficult. What I want to do is take a table name as a parameter to build a query and get an integer value from the result of the query. But from all of the research I have been doing, Dynamic SQL is bad in SQL server because of SQL Injections. But my users are not going to be supplying the table names.
Things I have learned:
- SQL Functions cannot use Exec to execute query strings. - SQL Functions can return a concatenated string that could be used by a stored procedure to Exec the query string.
So how can I write a stored procedure that will
1. take a parameter 2. Pass the parameter to a function that will return a string 3. Execute that string as SQL 4. Get a return value from that SQL statement 5. Then finally, from a View, how can I pass a parameter to the stored procedure and get the returned value from the stored procedure to be used as a field in the View?
Numbers 3, 4, and 5 are where I am really stuck. I guess I don't know the proper syntax and limitations of SQL Server.
Can we push the data for the above query in a physical table and create index to make the query fast rather than using the same set tables multiple times
I have a SQL text column from SP_who2 in table #SqlStatement:
like 1row shown below :
"update Panel set PanelValue=7286 where PanelFirmwareID=4 and PanelSettingID=9004000"
I want to find what table and column names are in the text ..
I tried like below ..
Select B.Statement from #sp_who2 A LEFT JOIN #SqlStatement B ON A.spid = B.spid where B.Statement IN ( SELECT T.name, C.name FROM sys.tables T JOIN sys.columns C ON T.object_id=C.object_id WHERE T.type='U' )
Something like this : find the column names and tables name
I got a table which gets populated by stor proc where we pivot the Sum(Balance of mortgage) by YYYYMM for the whole duration of the loan term.
I have a requirement to rename the column header where the previous month end balance period be renamed to P0.
if we run the report today, then the balance as at 31/09 should show under column P0 which now shows under 201509 and then P0 keeps shifting with each month run.
I've been able to startup a transactional replication between 2 database for some tables that only have different table names. Now there are still some tables that not only have different names but also different column names, can this be done in the wizzard ??
I want to select columns from different tables into a single table...Not sure if a temp table is suited for this and if so how I should implement it (NOTE: this query will be executed many times by different users at the same time, so I'd rather avoid temp tables!)I have:TABLE1idfirstnamedescriptioncreatedateTABLE2idcarnamespecificationsimportdateNow, I want a resultset that has the columns (columns from other tables from which the values should be retreived are behind the desired columns):id (TABLE1.id, TABLE2.id)title (TABLE1.firstname , TABLE2.carname)description (TABLE1.description , TABLE2.sepcifications)date (TABLE1.createdate , TABLE2.importdate)Thanks!
I am using CROSS APPLY instead of UNPIVOT to unpivot > one column. I am wondering if I can dynamically replace column names based on different tables? The example code that I have working is based on the "Allergy" table. I have thirty more specialty tables to go. I'll show the working code first, then an example of another table's columns to show differences:
select [uplift specialty], [member po],[practice unit name], [final nomination status] ,[final uplift status], [final rank], [final uplift percentage] ,practiceID=row_number() over (partition by [practice unit name] order by Metricname) ,metricname,Metricvalue, metricpercentilerank
[code]....
Rheumatology Table:The columns that vary start with "GDR" and [GDR Percentile Rank] so I'm just showing those:
I'm trying to pull all records from one table and just a single record from another. I have this join, (see below). It works ok, but the problem is if a blog record doesn't have a corresponding image record it doesn't return. The end result should be the blog record and a single corresponding image record. But always a blog record.
I have a transaction table to store all the transaction happened on a single day. as per my requirement I wrote the query like this select Currency Code,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans] from TransactionDetails where TransactionCode in ('BNT' ,'BCN','BTC','STC','SCN','SNT') group by TransactionCode,CurrencyCode,TransactionAmount order by CurrencyCode..I got the result like this
I have multiple databases in the server and all my databases have tables: stdVersions, stdChangeLog. The stdVersions table have field called DatabaseVersion which stored the version of the database. The stdChangeLog table have a field called ChangedOn which stored the date of any change made in the database.
I need to write a query/stored procedure/function that will return all the database names, version and the date changed on. The results should look something like this:
Now we have different packages for 4 tables data loading. These 4 packages will start at a time. Before going to load the data we have to make the Flag to 1 and after that we have to load it. Because of this we have written Update statement to update the Value to 1 in respective Package.
Now we are getting dead lock because we are using same table at a same time. Because we are updating different records.
I usually go for the largest datafile and then query in-there...But now I need to automate it for several instances... I need to be able with one script quickly retrieve the top 5 largest tables for the entire instance,not by database...
I am trying to build a DIM table using a source table that has the following setup...
CREATE TABLE [dbo].[APPL_STATUSES]( [APPLICATIONS_ID] [varchar](10) NOT NULL, [POS] [decimal](10, 0) NOT NULL, [APPL_STATUS] [varchar](5) NULL, [APPL_STATUS_DATE] [datetime] NULL, [APPL_APPLICANT] [varchar](10) NULL) GO
[code]....
What I am trying to do is to break out the APPL_STATUS_DATE into a STATUS_START_DATE and an STATUS_END_DATE in a new table. I also need to be able to update the STATUS_END_DATE based on the previous day's date. Like so...
CREATE TABLE [dbo].[APPL_APPLICANT_STATUSES]( [APPLICATIONS_ID] [varchar](10) NOT NULL, [POS] [decimal](10, 0) NOT NULL, [APPL_STATUS] [varchar](5) NULL, [STATUS_START_DATE] [datetime] NULL, [STATUS_END_DATE] [datetime] NULL, [APPL_APPLICANT] [varchar](10) NULL) GO
I have multiple databases in the server and all my databases have tables: stdVersions, stdChangeLog. The stdVersions table have field called DatabaseVersion which stored the version of the database. The stdChangeLog table have a field called ChangedOn which stored the date of any change made in the database.
I need to write a query/stored procedure/function that will return all the database names, version and the date changed on. The results should look something like this:
We run std 2008 r2. I haven't looked at my friend's function closely yet bur he showed me that when he selects from the function with one column and the same where clause he uses on same func with select *, he gets no data under the column he requested.
But when he selects * he gets a single row.
I took a peek and see a bunch of left joins followed by a bunch of outer applies in his func. I suppose (thinking out load) if anything random like the order of rows returned or sql decisions on how query runs can affect his function, that might explain it.
I am trying to insert values in a single table with four columns from 4 different sources. is it possible to run these 4 insertions in parallel. all these insertion are independent of each other
I have a data flow task in which there is a OLEDB source, derived column item, and a oledb destination. My source is a SQL command, that returns some values. I have some values, that I define in the derived columns, and set default values under the expression column. My question is, I also have some destination columns which in my OLEDB destination need another SQL command. How would I do that? Can I attach two or more OLEDB sources to one destination? How would I accomplish that? Thanks
I admit I am a novice to queries and stored procedures but understand stored procedures are more secure, so I am choosing to challenge myself with a stored procedure and have not been successful at all.
What I am looking for is a stored procedure which would query the single table named Hospital, which would search from a single textbox the end user would enter the text they are searching for on a Windows VB application but is dependant on a few end user selected items.
1. The end user can select a radio button either "Starts with" or "Contains" 2. The end user can select from 6 checkboxes (Hospitals, Address, City, State, Zip, Type) to limit or expand their search from the columns in the table.
The table has 17columns (CO, PARENTCO, ADDR, POBox, CITY, State, ZIP, TEL, FAX, WEBSITE, HOSP_TYPE, OWNERSHIP, BEDS, CONTACT, TITLE, Email) but I am only allowing the end user to search by the above 6 columns and need to display the above 6 columns plus the phone, fax and website columns.
After the user clicks the search button it displays the results in a listbox and the user will then select the one they want and it displays the information in another set of textboxes.
Hopefully someone can get me pointed in the right direction! Thanks for your help!
I am having trouble trying to find the max of 2 columns in one table. I've tried using a common table expression and a subquery, but can't seem to get the correct results. I want to get the max from refnum, then the max "number" associated with that max refnum along with the date and decision
I have a table called Employee which have 6 columns. This table are having 1000 records. Now I want to know the distinct value count of all these 6 columns as well as normal count. like this:
ColumnName DistinctCount NormalCount Id 1000 1000 Name 1000 1000 Phone 600 600 PINCode 200 1000 City 400 1000 Gender 2 1000