Hello. I need to store 2 values that i retrive from a databse into variables so i can check them towards what is typed into the textboxes for my login script iv built. How can i do this?1 string myConnectionString = @"Data Source=.SQLEXPRESS;AttachDbFilename=C:UsersalhoDocumentsIntrapointWebApp_DataIntrapoint.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True"; 2 3 SqlConnection myConnection = new SqlConnection(myConnectionString); 4 SqlCommand cmd = new SqlCommand("SELECT [username], [password] FROM [company] WHERE (([username] = @username) AND ([password] = @password))"); 5 cmd.Parameters.AddWithValue("username", TextBoxUsername.Text); 6 cmd.Parameters.AddWithValue("password", TextBoxPassword.Text); 7 8 myConnection.Open(); 9 10 //how do i pass the values retrived into variables, like string usrname and string password? 11 12 myConnection.Close();
can u give me some idea how to make Sp who having two variables as a parameter having values seperated by "," now thses vaues have to insert in to two tables tbColor .... colorname,product_id and tbSize.......sizename,product_id thanksss
I thought a stored procedure was taking much too long to complete. So, I moved the main query to Query Analyzer and found that when I substituted actual values for variables that my SELECT statement ran in seconds. Just to test, I created DECLARE statements, set the variables equal to the same values, re-ran the SELECT statement and it took over a minute. Even the Execution Plan was much different. Any suggestions?
Hello, I am looking into a new project and I assume that I can end-up in a situation where the same package could be called at the same time (or close enough) by different jobs passing different values to the package's variables. Is it going to work? Will each instance of the package run in a separate thread? I would think so because I already have a package similar to this. The different is that the new package will run for a long time as opposed to the older one which runs for a second or so only. Just wanted to make sure and gather your feedback. Thanks
I have variables and values stored in a table in this format
process_id | t_variable | t_value ----------------------------------------------------- 1 | Remote_Log_Server | AUSCPSQL01 ... many such rows
how to assign values to variables in SSIS?
basically i'm looking for SQL equivalent of the following query i currently use to assign values to multiple variables (in a single query)
SELECT @varRemoteLogServer=MAX(CASE WHEN [t_variable] = 'Remote_Log_Server' THEN [t_value] END) ,@varVariable2=MAX(CASE WHEN [t_variable] = 'variable2_name' THEN [t_value] END) FROM Ref_Table WHERE process_id=1
Can someone show how to do this?I have a SqlDataSource1, and i have a SELECT * FROM Table1How would i get@ProdName@ProdNumber Into the following local variablesString ProductNameInt ProductNumber I’m using C# and ASP 2.0 VWDThanks for Help1
From the microsoft technet How to: run a package using a SQL server agent job (http://technet.microsoft.com/en-us/library/ms139805.aspx):
Click the Set Values tab to map properties and variables to values.
Note:
The property path uses this syntax: Package<container name>.<property name>. Depending on the package structure, a container may include other containers, in which case nested containers are separated by a back slash (). For example, PackageMyForeachLoopMySequenceMyExecuteSQLTask.Description.
If this is the syntax for writing the container.property value, how do you write the variables?
Hi, figured out where I was going wrong in my post just prior, but isthere ANY way I can assign several variables to then use them in anUpdate statement, for example (this does not work):ALTER PROCEDURE dbo.UpdateXmlWF(@varWO varchar(50))ASDECLARE @varCust VARCHAR(50)SELECT @varCust = (SELECT Customer FROM tblWorkOrdersWHERE WorkOrder=@varWO)DECLARE @varAssy VARCHAR(50)SELECT @varAssy=(SELECT Assy FROM tblWorkOrdersWHERE WorkOrder=@varWO)UPDATE statement here using declared variables...I can set one @variable but not multiple. Any clues? kinda new tothis.Thanks,Kathy
I've got an SSIS package that works fine. It does extracts from a foreign ODBC source and moves it to SQL Server. It has 3 variables, a customer ID, a fromDate and a toDate. Those variables are used to complete a SQL statement expression. So far so good.
I now want to provide a web interface in a web page that will enable the user to provide values for those variables. How can I execute my package passing the user's input?
Following SQL is to be inserted in an audit table :
INSERT INTO GLOBAL_VARIABLE_LOAD
([LOAD_ID]
,[LOAD_STATUS]
,[START_TIME]
,[END_TIME])
VALUES
(@P_LOAD_ID
,@P_LOAD_STATUS
,@P_START_TIME
,@P_END_TIME)
@P_LOAD_ID, @P_LOAD_STATUS, @P_START_TIME, @P_END_TIME are the 4 parameters mapped to global variables (At package Level) which store values mapped in a previous SQL Task in my control flow.
Following Error Message is thrown on executing the SQL Task:
Invalid object name 'GLOBAL_VARIABLE_LOAD'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Can anyone guide me as to how should I go about saving values in global variables and inserting them in a table.
I am using a FTP Connection Manager and the configuration setting for it is being set in the package configuration xml file. So the xml file contains the Ftpserver, FTp server username and password. The package is picking up the values from the xml file and is executing successfully. I have to do this because I was not able to provide an expression to the Connection Manager Server Password property.
Now, I want to pick up the ftp details from a database table and set it in the xml file during runtime. Is this possible? OR something like using the
Kindly look at the items in bold. Is this possible? Then I can set the value of the variable in the package before the FTP connection manager task is executed.
HiThe scenario:The price of products are determined by size.I have a Prices table that contains 3 columnsWidth Length and Price.User inputs their own width and length values as inWidth and inLength.It is unlikely that these values will exactly match existing lengths and widths in the price table.I need to take these User Input values and round them up to the nearest values found in the Prices table to pull the correct price.What is the most efficient way of achieving this?Thanks for your time.C# novice!
However the issue is with [1],[2],[3] columns. Those are the number of days of the month. If today is the 3rd day of the month, we only need to show 3 days. So the final table has column [1],[2],[3] and @AccountType and @Total .
We want to run this query everyday to get the moth to date values.If we run this tomorrow, it will have 4 date columns [1], [2],[3],[4] and @AccountType and @Total .
Hello all,I'm trying to request a number of URLS (one for each user) from my database, then place each of these results into a separate string variables. I believed that SqlDataReader could do this for me, but I am unsure of how to accomplish this, or if I am walking down the wrong road. The current code is below (the section in question is in bold), please ignore the fact that I'm using MySQL as the commands work in the same way. public partial class main : System.Web.UI.Page{ String UserName; String userId; String HiveConnectionString; String Current_Location; ArrayList Location; public String Location1; public String Location2; public String Location3; //Int32 x = 0; private void Page_Load(object sender, EventArgs e) { if (User.Identity.IsAuthenticated) { UserName = Membership.GetUser().ToString(); userId = Membership.GetUser().ProviderUserKey.ToString(); HiveConnectionString = "Database=hive;Data Source=localhost;User Id=hive_admin;Password=West7647"; using (MySql.Data.MySqlClient.MySqlConnection conn = new MySql.Data.MySqlClient.MySqlConnection(HiveConnectionString)) { // Map Updates MySql.Data.MySqlClient.MySqlCommand Locationcmd = new MySql.Data.MySqlClient.MySqlCommand( "SELECT Location FROM tracker WHERE Location = IsOnline = '1'"); Locationcmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Locationcmd.Connection = conn; conn.Open(); MySql.Data.MySqlClient.MySqlDataReader LocationReader = Locationcmd.ExecuteReader(); while (LocationReader.Read()) { Location1 = LocationReader.GetString(0); //Location2 = LocationReader.GetString(1); // This does not work.. } LocationReader.Close(); conn.Close(); // IP Display MySql.Data.MySqlClient.MySqlCommand Checkcmd = new MySql.Data.MySqlClient.MySqlCommand( "SELECT UserName FROM tracker WHERE PKID = ?PKID"); Checkcmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Checkcmd.Connection = conn; conn.Open(); object UserExists = Checkcmd.ExecuteScalar(); conn.Close(); if(UserExists == null) { MySql.Data.MySqlClient.MySqlCommand Insertcmd = new MySql.Data.MySqlClient.MySqlCommand( "INSERT INTO tracker (PKID, UserName, IpAddress, IsOnline) VALUES (?PKID, ?Username, ?IpAddress, 1)"); Insertcmd.Parameters.Add("?IpAddress", MySql.Data.MySqlClient.MySqlDbType.VarChar, 15).Value = Request.UserHostAddress; Insertcmd.Parameters.Add("?Username", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = UserName; Insertcmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Insertcmd.Connection = conn; conn.Open(); Insertcmd.ExecuteNonQuery(); conn.Close(); } else { MySql.Data.MySqlClient.MySqlCommand Updatecmd = new MySql.Data.MySqlClient.MySqlCommand( "UPDATE tracker SET IpAddress = ?IpAddress, IsOnline = '1' WHERE UserName = ?Username AND PKID = ?PKID"); Updatecmd.Parameters.Add("?IpAddress", MySql.Data.MySqlClient.MySqlDbType.VarChar, 15).Value = Request.UserHostAddress; Updatecmd.Parameters.Add("?Username", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = UserName; Updatecmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Updatecmd.Connection = conn; conn.Open(); Updatecmd.ExecuteNonQuery(); conn.Close(); } } } } Can anyone advise me on what I should be doing (even if its just a "you should be using this command) if this is not correct? In fact any pointers would be nice !Thanks everyone!
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:
" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _
" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _
" AND street_suff = @street_suff AND street_post = @street_post " & _
" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _
" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"
My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
I am working with a data set containing several years' of monetary values. I have entries for past dates and the associated values, and I also have entries for future dates. I need to populate the values of the future date records with the values from the same date the previous year. Is there any way this can be done in Power Pivot?
I have to use the above comma separated values into a SQL Search query whose datatype is integer. How would i do this Search query in the IN Operator of SQL Server. My query is :
declare @id varchar(50) set @id= '3,4,6,7' set @id=(select replace(@id,'''',''))-- in below select query Id is of Integer datatype select *from ehsservice where id in(@id)
But this query throws following error message:
Conversion failed when converting the varchar value '3,4,6,7' to data type int.
I have my stored procedure set to Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
I receive the input file with some 100 columns and some 20k+ rows and I want to check the incoming input row is existed in the database or not based on 2 key columns. If the row is existed then I need to check all the columns (nearly 100 columns) values in input and the database are equal or not. If both are equal I need to treat them seperately if not there is a seperate logic. How Can I do that check for each row and for each column?
Basically the algorithm is like this, if the input file row is not existed in the database then treat that as new row else if the input row is existed in the database then check all the columns are equal or not. If all the columns are equal then treat that as existing row and do nothing else if some columns are not equal then treat this row seperately.
I found some thing to achieve the above thing. 1. Take the input row and check in the database. 2. If the row is not found in the database then treat it as new row. 3. If row is found in the database then a) Take the source row and prepare a concatenated string for all the columns b) Take the database row and prepare a concatenated string for all the columns c) Find out the hash code for the 2 strings and then compare hash codes for equal.
The disadvantage of this is running a loop 2*m*n times where m is the number of rows and n is the number of columns. It should be done 2 times for input file row and database row.
Can anybody suggest a good method to do this?
What does the function "GetHashCode" for InputBuffer in method "Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)" will do? Will it generates hash code based on all the columns values?
I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA : abc,cde,efg ColumnB : cde,xyz,abc
the result in
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the
1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:
where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)
2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.
3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)
If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9] ... [8_4],[8_7] ... [14_1], [14_2],...[14_10] etc.
Again, the series are usually discontinuous and specific to each specialty.
Here's the portion of the script (it's at the end) that I'm talking about:
--change values in square brackets below for each specialty as needed and change the denom number in the very last query.
if object_id('tempdb..#tempAllergy') is not null drop table #tempAllergy select * into #tempAllergy from dbo.#temp2 T
[Code] ....
If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.