Want To Display Report Without Header/parameter Section
May 22, 2008
Hi all,
I'm trying to embed a report into a CRM IFrame. So I have the report created in Business Intelligence Visual Studio 2005, but I need to display it with none of the header details SRS displays by default.
Using the following URL I included rc:toolbar=false and rcarameters=false but they don't seem to make any difference. I basically need to display the report content as if it were part of that page and not an SRS hosted page.
I'm trying to embed a report into a CRM IFrame. So I have the report created in Business Intelligence Visual Studio 2005, but I need to display it with none of the header details SRS displays by default.
Using the following URL I included rc:toolbar=false and rcarameters=false but they don't seem to make any difference. I basically need to display the report content as if it were part of that page and not an SRS hosted page.
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report  are static. we are using SSRS 2008
I am unable to display report header when I deploy the reports on report server (Internet). However, they look perfect when previewed in the BI studio. Any clue where could be the problem?
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
I have a report that I created and the report was working until I added some fields to a group footer row in a table.
My table has 5 group levels. I had information displaying in the 5th level header group and detail. It was working fine. Then I added some fields to the 4th level group footer. Now it displays only the Page header, Table header, and the 4th level group footer data.
What happened to the rest of the data?
All the cells and rows I want to display have the Visibility Hidden set to false. I tried removing the objects I added (to the 4th level group footer) and it still does not work. Is this a bug or did I set something that is hiding the data.
Hi, I have dropdown parameter with multi-values allowed. In my report headed I want to show all the dropdown values that were checked by the user to run the report. But since there could be a couple of hundred values I want to show ALL when all the values are selected instead of listing them one by one. How can I do that? Thanks,
I am trying to display a report parameter value in the report body, but when I run the report it is displaying the actual dimensional value [Product].[Category]&1 instead of the value that user has selected "Bikes". The report is built on Analysis Service data mart.
Environment: SQL Server 2005 - Analysis Services & Reporting Services.
When I open a report in Report Server it opens up with the parameter area open, showing available paramater lists.
However when I call the same report from another report the parameter area is closed. I would like the default behavior to be the same - an open parameter display area.
I am trying to figure out a way to toggle the visibility of attribute data based on a parameter. Specifically, I have a report that has many columns that an end-user may not want to see, depending on what they are using the report for. I know you can toggle visibilities on individual columns easily enough, however I want the user to be able to select which fields (at the attribute level) they want visible on the report up in the parameters, via a multi-value prompt.
Which suggests that if only one of the two multivalue parameter id is selected display the same (Parameters!ServiceAttribute.Value(0)).
This works fine when i select both the attributes but throws an exception "Index was outside the bounds of the array" when i select only one of the parameters. Can anyone help me with that?
Also i want this report parameter to allow null i.e. if a user does not select anything he should still be able to view the report. In case of regular dropdowns i have added a <Null> value to the existing values and set the default to null. But in case of multi-value, it does not give an option of adding <Null>
I have a report parameter named "Schools" which display a list of schools. For example, Alo elementary school, Balo middle school and Calo high school.
When "Alo elementary" is selected the report only display students from that school along with other assessments data fields. same goes for other schools too. But I want to display different data fields for "Calo high school" when it is selected. It is not currently possilbe becasue I am using the same template for all types of schools. There some fields only should be displayed for "Calo high school" but not for any other type of schools.
I can accomplish this by creating two separate report, one for "Calo high school" and the other for other schools. But I want to accomplish this just by creating one report. So when "Alo elementary school" is selected it displays report with certain fields and when "Calo high school" is selected then it displays same fields as "Alo elementary school" but as well as some other fields too in the report. Is this possible? Need help.
I was wondering if anyone has figured out a way to add text up in the parameter section of a report. I wanted to add something like: "Please use this option when you want a full result set" or something of the sort.
Hi, I dont know if theres a way to print a section of some report, for example a summary report, where I have several charts and tables, and I want to print just the first 2 charts Could this be done by mapping the document or separating it in some other way?
I tried using 'SubReports' control, but this way I need to have for example the first two charts in a different report (lets say 2charts.rdl), and then in the summary.rdl, add the control and set the link to 2charts.rdl,.... but I think this is pretty annoying considering the future modifications of the format in the 2charts.rdl...
I need some help. I am writing a report in SSRS 2005 that I then need to export to Excel. When I put a report header I would expect the header to not display in the Excel spreadsheet until the Print Preview or the Print. The report footer works just fine I put some text in the footer, and it shows up in the footer. The header though, shows up as a row in the Excel spreadsheet that then causes columns to merge. How do I get the report header to act like a page header?
I am making a book-like report, I am using a report that has a header and calling a sub-report that has it's own header. However the sub-report header is not showing on the parent report. Parent report header is prevailing over the sub-report. Is it possible to have both headers displaying?
There is a one header in the report, when I publish and hit the report in IE(internet explor) the header appears fine on first page when I go to next page this header does not appear.
But in mozilla the header is visible on every page of the report. so it is working fine in mozilla.
I need to keep a section of a report the same size. I have now a table with a detail and group section. The table header must print on every page and the table footer must print on every page. The detail section can only be 16 rows. When I have more than 16 rows the report page breaks perfectly and puts the remaining rows on the next page along with repeating the header and footer. The problem is when there are fewer than 16 rows the table does not take up the full page and looks horrible. All my displayed data is in the data set. I have looked at padding the dataset with bogus rows that would show up at the end and just not display but would rather take care of this on the report end. Any ideas? Thanks, Chad
I am trying to access HttpContext.Current in my report code section (report properties) since I have to look at a cookie. However, HttpContext.Current is always null. Has anyone managed to access HttpContex.Current from a report?
I'm trying to create a reprot with 30+ datasets/querys. My report is made up of tables (one for each dataset), and it starts a new page whenever a new dataset is being displayed. I would like to have a header on every page, and have it display a custom name for the dataset on that page. How do I approach this? Thanks for any answers or leads.
is it possible to separate Grand Total of a sub group to a new page?
I tried using advanced mode, find the first line the Grand Total section and set its "RepeatOnNewPage" to true, but, when I execute the report, it will throw an error something like the value of RepeatOnNewPage of the TablixMemeber must be the same as its previous object.
I need my report pages to separate by subGroup(SubGroupA, SubGroupB, A+BTotal).
Adding a Databound Image to a Header or Footer You can use image data stored in a database in a header or footer. However, you cannot reference database fields from the Image control directly. Instead, you must add a text box in the body of the report and then set the text box to the data field that contains the image (note that the value must be base64 encoded). You can hide the text box in the body of the report to avoid showing the base64 encoded image. Then, you can reference the value of the hidden text box from the Image control in the page header or footer.
For example, suppose you have a report that consists of product information pages. In the header of each page, you want to display a photograph of the product. To print a stored image in the report header, define a hidden text box named TXT_Photo in the body of the report that retrieves the image from the database and use an expression to give it a value:
Does anyone know a way to display the header of a sub report when the sub report is part of a main report? Im able to get the main report and the sub report to display properly, but the header of the previously developed/tested sub report will not display when embedded in a main report.
I have a report that grows horizontally as it contains a matrix. In the header section of the report, I have items such as Title and time stamp in text boxes. How can I make these items align in the center if the report grows horizontally, it looks kinda odd with report title not being in the center? Any input will be appreciated.
I pass in 3 querystring parameters to my web form. The Object Data Sources pick up these parameters and select the appropriate records.
I want to display one of the querystring parameters in my Page Header, specifically the one for Fiscal Year.
I could return the Fiscal Year in a column from the data source, but the Fiscal Year would not populate if no records were returned...Therefore, I must get the querystring parameter that was originally passed in...
How do I populate the report control textbox with the value of querystring parameter?
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
