Cascading Parameter Alwaycome Back To Default Value
Feb 9, 2007
Hi all,
I encounter a cascading parameter problem that confuses me badly.
I have a Web App, say App1, and view the server report, say Report1, through Report viewer. I pass a parameter (P1)value from App1 to Report1. at the report side, I create a dataset, say DS1, against the P1's value. Then I create second parameter P2 whose value comes from dataset DS1, and I set its default value as DV1 (it could be Null, or querying from DS1 or a constant). The report1 comes agains the value of @P2.
The problem is here, when the report is run, @P2 can show correct value list in its dropdown (comes from dataset DS1), but after I select the values and click 'view report', the of value of @P2come back to the default one, DV1, and the report comes out against the DV1 (not what I selected).
Any idea?
Thanks
View 1 Replies
ADVERTISEMENT
Jan 30, 2007
Hi,
I need "conditional" cascading parameters: In Report Manager when one changes parameter 1, parameter 2 get changed based on parameter 1. Optionally, one can also enter values to parameter 2 directly.
I was able to achieve this in SSRS 2000 (SP2) with the following setups. SSRS 2005 and SP1 no longer works - Parameter 2 always shows its default value regardless whether one select a value in Parameter 1 or not.
Parameter 1
available values: from query
default values: non query (specify a value "<None>")
Parameter 2
available values: Non query (no value specified)
default values: from query (based on Parameter 1)
It seems to me that the default value in SSRS 2000 is considered as cascading parameter. But it is no longer the case in SSRS 2005.
Is this a SSRS 2005 bug? is there any other work arounds or suggestions?
Thanks.
Kong
View 6 Replies
View Related
Jul 19, 2011
I have two parameters, lets say P1 and P2. P2 is cascaded with P1. P1 -> P2.
For the parameter P2, the following proterty set are
 1. Multi Select
 2. The default value is all the available value selected (Same dataset is assigned to both "Available Values" and "Default Values")
The data relation be,
P1Â Â Â P2
AÂ Â Â Â a
AÂ Â Â Â b
AÂ Â Â Â c
AÂ Â Â Â d
BÂ Â Â Â a
Now the issue is,
Step 1 : When i choose A in P1 first time, a,b,c and d in P2 are selected
Step 2 : When i change B in P1, a is selected
Step 3 : When i change back to A in P1, only a is selected in P2 (a,b,c and d should be selected)
View 3 Replies
View Related
Mar 3, 2007
I have 5 cascading parameters. They all have default values. I would like the default value of each of these to be selected when the report opens.
It currently works correctly when I preview the report, however when I deploy the report to the server it does not. In the deployed report, the default value of the first parameter is not selected. However, when I select a value for this one, on postback the rest of these parameters get set to their default value. They're all configured the same. I'm confused as to why the first one doesn't default to its default value while the others do.
Got any ideas?
Here's how I have it configured:
Allow null value CHECKED
Allow blank value CHECKED
The rest are unchecked.
Available values: From query
Default Values: Non-queried with a value supplied that exists in the dataset.
View 1 Replies
View Related
Sep 24, 2007
Hi Friends,
I have 2 parameter One is Office (Listbox) another Account(list box) , where Account list box filling is dependent on the Office selection.
In published report when I select the office from list box the page got refreshed but it not updating the account list, the account list box looks diabled?
I have define the two parameter and for the second parameter here is the query
="SELECT ACCOUNT_ID, ACCOUNT_NUMBER FROM MLGDB2.A_ACCOUNT " &
"where OFFICE_ID =" & Parameters!paramOffice.Value &
"ORDER BY ACCOUNT_ID "
To access parameter i need to use Parameters!paramOffice.Value with ODBC driver instead of @param.
Can any one help me.
Thanks
Novin
View 4 Replies
View Related
Sep 20, 2007
Hi Friends,
I have 2 parameter One is Office (Listbox) another Account(list box) , where Account list box filling is dependent on the Office selection.
In published report when I select the office from list box the page got refreshed but it not updating the account list, the account list box looks diabled?
I have define the two parameter and for the second parameter here is the query
="SELECT ACCOUNT_ID, ACCOUNT_NUMBER FROM MLGDB2.A_ACCOUNT " &
"where OFFICE_ID =" & Parameters!paramOffice.Value &
"ORDER BY ACCOUNT_ID "
Can any one help me.
Thanks
Novin
View 4 Replies
View Related
Feb 18, 2008
I am having a problem with Cascading Parameters in a RS2005 SP2 report.
In the report the user selects the part # (param 1) based on the part number selected the
serial # list (param 2) is populated. This all works fine.
The problem is that when the user clicks on the View report button the report is generated and the part # stays the same but the serial # parameter is "reset". On the development box it gets reset to the last serial # on the list. When we deploy out to our production environment it gets reset to the first serial # in the list.
Is there a way to stop the serial # (param 2) from being reset and to have it stay to what the user selected.
Thanks.
View 3 Replies
View Related
Oct 9, 2006
Hi,
I am using RS2005. i have a requirement in which i need to pass more than 1 value to a parameter. this parameter is used in a dataset for filtering.
Eg: if i have a parameter as @years, i want to assign values 2005, 2006 to it and use it in the dataset to filter like select.... where year in (@years).
How can i achieve this?
Thanks
Vivek S
View 13 Replies
View Related
Sep 30, 2015
So this is my first time posting on MSDN but I am running into an issue I don't know how to circumvent. This issue isn't causing my report not to run but it makes it very confusing for end users. Â I am building a report for a user and he was cascading parameters. The parameters are Department (the Parent), Site (the Child) and Vehicle Class (the grandchild).
Here is my issue: If I select 2 Departments named Dept1 and Dept2, the Site parameter populates. If Dept1 and Dept2 have sites named the same, example fleet, Fleet shows up in the site parameter twice.Â
Then the Vehicle Class parameter populates. Now if at those sites they have the same vehicle class, lets say 1/2 ton pickup, 1/2 ton pickup is in the vehicle class parameter twice.Â
All three of these parameters are populated by a query and all of the queries are using SELECT DISTINCT. I know I could manually input values for the parameters but there are to many departments and sites and they all vary to much depending on the department.Â
Is there a way to to only have distinct values populate the parameter even if the parents have the same child?
View 3 Replies
View Related
Aug 11, 2015
@pvColumnName  VARCHAR(100) = Default,  
However, I am unable to determine what is the value for Default. Is it '' ?
Default is not permitted as a constant - below fails to parse:
WHERE t2.TABLE_TYPE = 'BASE TABLE'
AND (@pvColumnName = Default OR t1.[COLUMN_NAME] Like @vColumnName)
View 4 Replies
View Related
Aug 17, 2005
I need to implement my cascading deletes on a SQL database. Is it better (performance/reliablility-wise) to use the Foreign Key Cascading Deletes or to just write my own triggers to do the deletes?I was hoping someone had experimented and found which works best.
View 2 Replies
View Related
Oct 15, 2007
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
View 7 Replies
View Related
Mar 18, 2007
A have a multi-valued parameter (B) which is dependent on a single-valued parameter (A) on my report. When a value is selected in A, I want all matching values in B to be selected by default and the "Select All" option checked. To do this I have set the Default Values section in B to point to the same dataset as the "Available Values" section. Both A and B have default values so the report runs automatically.
One of the values in parameter A (say Value1) yields more values in parameter B than the other (say Value2).
If I run the report the first time with Value1 selected as the default for parameter A, all values in B are checked correctly. If I run the report with Value2 selected the first time and then change the selected value to Value2 and run my report, all values in B are displayed but only the values that were previously checked (when Value1 was selected), are now checked, leaving the "Select All" unchecked.
What am I doing wrong? Why are all the values in B not checked? The dataset is the same in "Available Values" section and "Default Values" section.
View 8 Replies
View Related
Jan 13, 2014
I want to set the default parameters for a function. I;d like to set the date start date to current date and end date for the last 90 days. how to make this work?
Create Function HR.Equipment
(
@startdate Date =(Convert(Date,DATEADD(DAY,-1,GETDATE())),
@enddate Date = (Convert(Date,@StartDate-90)
)
RETURNS TABLE AS RETURN
(
SELECT
EquipID,
EmpName,
IssueDate
FROM HR.Equipment
WHERE IssueDate <=@StartDate and IssueDate >=@EndDate
)
GO
View 5 Replies
View Related
Jul 24, 2007
I have a dataset listing distinct values for items (like 1, D10, M4, etc.) The WHERE statement in my query refers to unit IN(@Unit). I then have 2 report parameters to select 1) a date (datetime); and 2) a multivalue parameter to select one or all of the "units". I would like the second parameter to default to "Select All". Can someone tell me how to do this? I'm sure this is a fairly simple thing but I am really struggling. The report parameter is set as multivalue; My "available values" is set to "from query" and refers to my "unit" dataset and the value and label fields are set to "unit" (only field I bring into this particular dataset). The "Default Values" section is set to "from query" , the dataset is set to "unit" and the value is set to "unit". I can preview the report and select a date but the list of units comes up with all boxes unchecked, including "Select All". Any help will be much appreciated. Thanks.
View 11 Replies
View Related
Mar 1, 2007
I have a SP that inserts data into a table with an identity column I want to get that id and use it in my response.redirect however I keep getting 0 back instead of the identity. Relevent Sql 2005 Declare @NEWEMPID int --after an insert happens in sqlSet @NEWEMPID= SCOPE_IDENTITY()--last thing in my sqlReturn @NEWEMPID Or I tried NEWEMPID as an output parameter VB.Net Dim retValParam As New SqlParameter("@NEWEMPID", SqlDbType.Int) retValParam.Direction = ParameterDirection.ReturnValue'execute the sqldatasource insert command
sqlEmpNewEmp.Insert()
Dim EmpIDVar As Integer = Convert.ToInt32(retValParam.Value) Response.Redirect("http://www.mysite.com?EMPID=" + Server.HtmlEncode(EmpIDVar)) sqlEmpNewEmp.InsertParameters.Clear()
View 8 Replies
View Related
Jun 5, 2015
I have 3 requests to do and all 3 are below in SQL Â , i am planning to keep them as job and run on regular intervals as per request ..
1.Poll the contract approval table for no prepared new contracts.  Check every 30 minutes from 9am to 10pm – 7 days a week.
IF NOT EXISTS (SELECT * FROM ContractApproval WITH (NOLOCK) WHERE ContractPrePared>DATEADD(MINUTE, -30, GETDATE()))
BEGINÂ
SEND DBMAIL ---i have this part working alreadyÂ
ENDÂ
Â
2.Poll the contract approval table for no new signed contracts.  Check every 30 minutes from 9am to 10pm – 7 days a week.
 IF NOT EXISTS (SELECT * FROM ContractApproval  WITH (NOLOCK) WHERE DateSigned>DATEADD(MINUTE, -30, GETDATE())
BEGINÂ
SEND DBMAIL ---i have this part working alreadyÂ
ENDÂ
3.Poll the lead table for no new leads. Â Check every 5 minutes. Â 24/7.
  IF NOT EXISTS (SELECT *    FROM  Lead WITH ( NOLOCK )    WHERE  DateCreated  > DATEADD(MINUTE, -5, GETDATE()))
BEGINÂ
SEND DBMAIL ---i have this part working alreadyÂ
ENDÂ
I am planning to keep 1,2,3, in seperate sp's and run them as JOBS....how can i achieve below a,b ?
a.The procedures should accept a parameter that indicates the interval, in minutes, that they should look back
b.Each step in 3 jobs should invoke the procedures, specifying the interval with which the job runs at
View 7 Replies
View Related
Mar 18, 2004
I'm using a stored procedure that receives one parameter namely @EmployeeID INT
but when I want to give this parameter a default value, my SP fails.
I did it like with a varchar where it works.
---
@Employee INT = '%'
---
Is this correct or did I use a wrong syntac/wildcard?
Greetings,
Geoff
View 6 Replies
View Related
Apr 26, 2007
Hi
I have a report parameter that may contain one item or it may contain more than one item. Is there a way I can default the parameter if it contains one item, to that item. But have no default if there is more than one option?
Cheers
View 3 Replies
View Related
May 11, 2007
Hi... need to default the customerId on a sub form.
Insert string is:
InsertCommand="INSERT INTO CustomerNotes(Note, CustomerID) VALUES (@Note,@KEY)"
Parameter:
<asp:Parameter Name="KEY" DefaultValue='123456789'/>
Need to make the '123456789' the value of the request.querystring('ID")
How is this done?
Thanks in advance....
View 2 Replies
View Related
Jul 7, 2014
in a StoredProc I want depending on whether a parameter is passed formulate the Where clause accordingly.
If parameter IS NOT NULL
THEN take all Rows
Else take the row with the ID (INTEGER)
How do I formulate the where clause?
View 3 Replies
View Related
Jun 12, 2008
I am using a query to grab information about the parameters of stored procedures. I am trying to determine if a parameter has a default value. I have tried adding a default value to the parameter of the stored procedure, but the returned value of params.has_default_value stays at zero. What is going on?
Here's the query to pull the stored procedure information:
SELECTprocs.name as ProcName,
params.name as ParameterName,
types.name as ParamType,
params.max_length,
params.precision,
params.scale,
params.is_output,
params.has_default_value
FROMsys.procedures procs
LEFT OUTER JOINsys.all_parameters params
ONprocs.object_id = params.object_id
LEFT OUTER JOINsys.types types
ONparams.system_type_id = types.system_type_id
ANDparams.user_type_id = types.user_type_id
WHEREprocs.is_ms_shipped = 0
ANDprocs.name = 'webservices_BENEFICIAL_USES_DM_SELECT'
ORDER BYprocname,
params.parameter_id
Here's the stored procedure:
ALTER PROCEDURE [dbo].[webservices_BENEFICIAL_USES_DM_SELECT]
-- Add the parameters for the stored procedure here
@DISPOSAL_AREA_NAME DISPOSAL_AREA_NAME_TYPE = 'a'
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
IF @DISPOSAL_AREA_NAME IS NULL
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
END
ELSE
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
WHEREDISPOSAL_AREA_NAME = @DISPOSAL_AREA_NAME
END
END
View 14 Replies
View Related
Dec 26, 2007
I have a report which has paramets as startdate and enddate. I want to set default value as yesterday. So when It opens it shows yesterday data.
I have a expression like this.
(DATEDIFF(dd, 0,MoneyFlowTransaction.ProcessedTime) = DATEDIFF(dd, 0, GETDATE()) - 1)
But I'm wondering how I set this as dafault value.
can anyone help me pls?
View 10 Replies
View Related
Sep 28, 2007
Hi everyone,
I have a report that a user can enter parameters in. If the user opens the report the parameter box is at the top and expanded. The report is also linked to by another report, so when a user clicks on something in this other report it becomes the parameter for the one I'm having the problem with. The problem is the user can select the number of days that are displayed, so when I link from the other report I just pass 10 by default, but now in the report the parameter box is collapsed and I'm worried that users won't find it. Is there a way to force it to be expanded? Sorry this is probably confusing to read.
Thank you,
Keith
View 3 Replies
View Related
May 9, 2008
I set parameter as Multipul selection.
how to set it as "Select all" by default?
Thank you!
View 12 Replies
View Related
Nov 2, 2007
Hi Folks,
I'm having a problem showing my boolean default parameter on report server in our test environment.
The report server shows my boolean parameter with a yes and no radio button. I assigned my boolean parameter with a 'No' default. The default shows and runs fine when I run the report within Visual Studio.(I hope I'm using the correct terminology.) However, on the report server the 'No' radio button is not checked by default. What am I doing wrong?
Thanks in advance for your assistance.
View 3 Replies
View Related
Jan 30, 2007
Hi all,
Does anybody know how to set the parameter's default value dynamically?
I'm working on a report with some parameters against datacube, and I hope the default value of one of the parameters could be set dynamically based on the user's login.
Thanks,
Jone
View 1 Replies
View Related
Oct 19, 2007
While converting Crystal reports to Reporting services I noticed that the existing crystal reports puts todays date as default value for the date parameter. Users also want it that way. I was unable to find a way to put a default value for a parameter in SSRS. I am a newbie in this so may be I missed something.
View 1 Replies
View Related
May 21, 2008
I am trying to set the default date in my datetime parameter to yesterday's date, so the user does not have to select using the datepicker calendar. I am using Visual Studio 2005.
I put the following code into the Report Parameters non-queried default values function line, but it adds the timestamp to the date.
=DateAdd(€?d€?, -(WeekDay(Now()))+1, Now())
How can I get yesterday's date to default but without the timestamp?
Thanks!
Marissa
View 6 Replies
View Related
Aug 21, 2007
Friends,
I have a report which has a Multi Value Parameter. I want the default to be selected as 'Select All'. Can anyone tell how to get this?
Thanks,
S Suresh
View 3 Replies
View Related
Oct 29, 2007
I have two parameters for my report. For simplicity, let's say the first one is a pet and contains of a combobox with the avaliable values: "Dog", "Cat" and "Bird".
The second parameter is favourite food and contains the values "Fish", "Seed", "Sousage" and "Apples".
Each of the Pet's has a 'default' favourite food that should be selected by default when a pet is selected. So, when I select 'Cat' in the first combobox, 'Fish' is selected in the second. This works fine, by setting the default value in the second parameter to the value of a dataset (the dataset retrieves the default favourite food for the selected pet).
The problem occurs when I first select a cat, recieving 'fish' in the second parameter, and then selects 'Bird' in the first parameter. What happens is that the second parameter is NOT changed from 'Fish' into 'Seed'. I guess this is because the second parameter already has a value ('fish') so a new default value is not calculated.
So, my question is, is there any way to force a 'recalculation' of the default value of my second parameter when the first parameter is changed?
Regards Andreas Brosten
View 4 Replies
View Related
May 31, 2007
Any way to have the default value of a parameter for a multi select parameter be the first value of the query of that parameter?
View 7 Replies
View Related
May 9, 2007
I have a report with default parameters set as ' ' i.e a blank value through a query.
when i deploy this report RS2005 adds a <select a value> as the text listed in the dropdown beacuase of which it does not take my default value and no display of report.
How can I remove this text being shown.
Thanks,
Kiran.
View 11 Replies
View Related
