Database Mail Problem...Query Execution Failed: Error Initializing COM
Jun 1, 2007
Hello -
I'm having a problem sending the query set as an email text attachment. Test transmissions from Database mail working fine.
Send simple messages with the sp_send_dbmail sproc works fine as well.
It is only when I try and send a query result that things blow up. The query itself is working fine also, so I'm now down to think there is some esoteric problem with the sproc itself.
Surface config features have database mail on, and SQL Mail off.
Msg 14661, Level 16, State 1, Procedure sp_send_dbmail, Line 476
Query execution failed: Error initializing COM
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Investigating the sproc itself shows...
Line 476 in the sproc is the beginning of a 'trap'
--Raise an error it the query execution fails
-- This will only be the case when @append_query_error is set to 0 (false)
IF( (@RetErrorMsg IS NOT NULL) AND (@exclude_query_output=0) )
BEGIN
RAISERROR(14661, -1, -1, @RetErrorMsg)
END
RETURN (@rc)
this is the last section of code in the sproc
I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.
I am creating my first SSIS package, simple, I read a file, a computation and then write it to an excel.
I am getting the message: "Test connection failed because of an error in initializing provider." The database is NOT remote. My computer is slow though. after about 10 or 15 seconds after clicking the button to test my connection, I get the message and much more. The message asks me if the instance name is correct. I don't know what this would be. This message is on the first task, reading the file (finding the file).
The last sentence of the long message is: "Named pipes provider: Could not open a connection to SQL Server (2).
My question is: Why am I getting this message and what do I need to do to resolve this problem?
Have 6 SQL Server 2012  failover clusters  environments on Windows 2012 R2 standard edition.Have intermittent connectivity issues when using Windows Authentication, with the error "test connection failed because of an error in initializing provider. login timeout expired" . Am checking by using a UDL file and have tried the below.
1) Have made port changes to use static 1433 port. 2) Have enabled shared memory and using Named Pipes and TCP/IP by using cliconfig. 3) Have turned off firewall. 4) Loopback is disabled 5) SQL Browser is running, have changed 'Built in Account setting'  from 'Local Service' to 'Network Service'. but with no effect.
Still I am getting intermittent connectivity issues.
I'm facing a strange problem.. I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web. in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also.. if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue thanks in adv.
I have created and deployed my first report. It renders fine for me and the other database admin. When others attempt to view it, we get the error
Query execution failed for data set 'periods'. (rsErrorExecutingCommand), For more information about this error navigate to the report server on the local server machine, or enable remote errors
Initially, We created a local group on the machine that hosts both the database and webserver and added the individuals to that group. Then, within SRS Report manager, we added that group to the Browswer role of the report. The error message was slightly different, in that it couldn't even open the Datasource.
We then added an individual to the database as dbreader, and got the above message. It apprently is starting to render, and when it encounters the first query (dataset "periods", which populates a drop down list for a parameter), it chokes. BTW, the Periods dataset executes a stored procedure dbo.Period_List that has no parameters. It returns a list of reporting periods.
I could not figure out how to "enable remote errors" or find an error log on the server. The C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles Log files did not appear to record any errors.
I have a group of reports using a shared datasource. Going to the preview of the report works fine in the report designer, but when I try and view it from a browser (deployed on a website), it gives the error:
"An error has occurred during report processing.
Query execution failed for data set 'DataSet1_ticketInfo'.
Failed to parse SQL.[long sql query here]"
If there's a problem with it, I don't get why it works in preview mode. I'm using SQL server 2005.
I have several reports that are working great on my report server. However, one of my reports "ReportB" is launched as a hyperlink from "ReportA" through the use of a custom function which uses a little javascript to simply open a new browser to the URL of ReportB along with passing a parateter through that URL. I can get it all to work great on my local machine I'm using for development. But when I deploy it to my production server I get the following problems (Please note ReportA works fine, it is ReportB that gives me these problems):
1. When running report in web browser on my local machine - An error has occurred during report processing. Query execution failed for data set 'FDQW'. For more information about this error navigate to the report server on the local machine, or enable remote errors.
2. When running the report in a web browser on the report server itself (also is the SQL server containing the data) - An error has occurred during report processing. Query execution failed for data set 'FDQW'. Must declare the scalar variable "@DocNo".
Like I said above... when I deploy to my local RS on my development machine I get neither of the above problems. I have tried changing SQL roles, RS Execution accounts, database connection credentials, all kinds of permission realated things and can't get it to work.
I am not using a stored procedure as a data source. Here is a copy of my data set query if it helps:
SELECT DocumentHeaders.DocNo, DocumentHeaders.SoldToCompany, DocumentHeaders.SoldToContact, DocumentHeaders.SalesRep, DocumentHeaders.DocName, DocumentHeaders.DocDate, DocumentHeaders.GrandTotal, DocumentItems.LineNumber, DocumentItems.Description, DocumentItems.QtyTotal, DocumentItems.ExtendedPrice FROM DocumentHeaders INNER JOIN DocumentItems ON DocumentHeaders.ID = DocumentItems.DocID WHERE (DocumentHeaders.DocNo = @DocNo) AND (LEN(CONVERT(varchar, DocumentItems.Description)) > 0)
We are using SQL 2005 server for generating reports.When we ran the reports it taking so much time after some time it shows this error:---
ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set ---> System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded.
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.). ),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
I got this Error, Query Execution for Dataset 'Source'.
When i try to run a report that is actually a drillthrough from another report. It runs fine in Report Designer, and when i deploy to my Local server. But when i deploy it to my virtual Report Server, I get this error messege. Why is it doing this? and where can i see errors for this type of stuff, so i can figure this out. This uses the same Datasource as the report linked from it. That report works fine, why wont this one? any ideas?
Hi All, I have a report which has two subreports in a table.First Sub report1 ,then a detail section and sub report 2. Sub report1 runs fine.But sub report2 gives error in the main report"
Query execution failed for data set 'DataSet_azshdsd30'. For both the sub reports parameters passed from the main report are same(2 parameters). When I run sub report2 indivisually it gives right result.But not in the main report. Also when I put Subreport 2 in place of subreport 1 I do get the results in the main report. Any idea,any body?? Thanks.
I'm trying to send an email using master..xp_sendmail with parms andthe default Outlook profile. I can successfully test the profile on myown computer and on the server.I'm running using Windows authentication and have given myself fulladmin rights in MSSQL.Which account is mssql trying to send the email from? Is it theservers or my local clients?The mailbox does not appear to be full and it's possible to send &receive emails on the server and on my own machine.What could be a possible cause or the next thing I can check?Thanks!
Hello!My environment is: Win 2000 Server, MS SQL-Server 2000 (SP2)and MS ExchangeServer 5.5the two following TransactSQL-codepieces show differentresults:1. with attachmentmaster..xp_sendmail@recipients = 'j.hetzel@rac.de',@subject = 'test',@message = 'test',-- ******************************@attachments = 'c: est.txt',-- ******************************@no_output = 'False'-->18025 level 16 state 1 line 0xp_sendmail failed with mail error 0x800040052. without attachmentmaster..xp_sendmail@recipients = 'j.hetzel@rac.de',@subject = 'test',@message = 'test',-- ******************************-- @attachments = 'c: est.txt',-- ******************************@no_output = 'False'-->Mail sent.why am I not able to send emails with attachments?Who can help me???Thanks in advanceJürgen
After consulting with the Exchange Administrator, I was advise that there is a limit on file attachments. This explains why I get this message with large (>20MB) attachments.
With this additional information I need to compress my file using a compression tool like winzip or pkzip. My company uses the windows version of pkzip. However, I have downloaded an evaluation version of the PKzip command line version.
Can someone provide guidance how I can execute this utility within my sql procedure?
I'm trying to get some proof of concept reports made for a MOSS / SQL Server 2005 (sp2) Integrated solution. I have a simple report that displays everything in the 'incident' uploaded to the MOSS server, and it works fine.
I've made another report that uses a line chart to plot some averages. This report, called 'Average Control Time by Weekday' works 100% ok in VS2005 preview mode and both reports use the same datasource. The report is uploaded and the dataset is all linked up.
When I view the report (by clicking on it's link on my Sharepoint Site), however, I get an error:
An error has occurred during report processing.
Query execution failed for data set 'DataSource1'.
Invalid object name 'incident'.
I've checked the SQL that was run in the SQL Server Profiler to see what transactions were hitting the database. The query that the report makes when in VS2005 Preview mode is precicely the same as what Sharepoint makes when it tries to render the report.
I made another plain report (just a table view) that uses the same query as the 'Average Control' report and tested it on Sharepoint, and it works perfectly. Any ideas?
p.s. I even asked I-God (http://www.titane.ca/concordia/dfar251/igod/main.html) all he said was that I would need a court order to get rid of the recursion in AIML... and then asked for my credit card number.
I get the following error when running a report in report builder using the Adventureworks sample model: Semantic query execution failed. Incorrect syntax near 'NULLAND'.----------------------------Query execution failed for data set 'dataSet'.----------------------------An error has occurred during report processing.
Here is how to replicate the error:
Create a table report using the Adventure Works model. Select Product entity, add Product Category and #Products to the table. Edit formula for #Products to "COUNT(Products)" and add a filter on Products for "Discontinued Date is empty". (I want a count of products that have not been discontinued). If you run the report now, it willl work as expected. Add a report filter for "Product.Color is empty" (I only want to see products that don't have a color) Run the report to get the above error. While the above is a contrived example, I am getting the same error on a data model that I am developing for a customer.
Am I missing something, or is this a bug in Report Builder?
Have run about six downlowds and all fail with same problem. The installer seems to be missing a file. all other parts of Viz studio Exp install but NOT the sql server exp.
Am I the only one getting this ? and if so what is the problem?. All other Visual Dev Express parts have instald OK.
Run on XP home SP2. As I posted this I noticed the compiler time stamp is 4 days ahead of real time ???
From the install log:
Complete: ParseBootstrapOptionsAction at: 2006/9/22 15:34:19, returned false Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run: Could not parse command line due to datastore exception. Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Wed Oct 26 16:38:20 2005 Function Name: writeEncryptedString Source Line Number: 124 ---------------------------------------------------------- writeEncryptedString() failed Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Wed Oct 26 16:38:20 2005 Function Name: writeEncryptedString Source Line Number: 123
We have our SQL Server 2005 hosted at a datacenter and have only SS Management Studio access (no term serv, no event log, etc.). Also, our hosting company has disabled the Database Mail feature. We have over 60 jobs running on a minute/hourly/daily basis that are critical for our business. It is super important for us to know if and when a job failed.
Given this scenario, how do you suggest we implement monitoring/notification of failed jobs?
Hello I am receiving the dreaded mail error listed above. I can send out a test E-mail from Enterprise Manager to operators, but I cannot run this Transact query:
I have inherited a server on which is a maintenance plan with two subplans on different schedules. In each subplan there are Execute T-SQL tasks with scripts for index rebuilds. Each task is set up with a Completion arrow to the next task and a Failure arrow to a Notify Operator Task. I was asked to add a task for index rebuilds to a specific subplan for a specific database, which is what the other tasks also do. I discovered that my task was failing but the others were fine. No notification was sent about my task failing even though the job is marked in MSDB as a failed job. I have sent a test email using the "Send Test Email..." option when right clicking Database Mail in SSMSand I receive an email so I know Database Mail works.
I set up a test job to model the index job that I can't get notifications from. I have two T-SQL tasks that just select the top row from a small table. The first task has a syntax error that I did so it would fail. I have a failure arrow to a Notify Operator Task and a Completion arrow to another T-SQL task with no syntax error which has a Success arrow to a Notify Operator task. As expected, when I execute this job I receive one failure email and one success email.
The only other troubleshooting step I know to try is to add a Notify Operator task before my failing task. That Notify Operator task will hopefully fire to tell me that the previous step was successful. I am not having problems with the other steps so I was just thinking I would try to get the subplan to send me a success email about one of the steps that has been working fine.
Hi, I have created a profile named sqlmail in exchange server. I tried to run the sql mail service from support service under sql mail to put the profile name, I got the following error: can any one assist me in setting up sql mail in an sql server 2000. .... thanks Ali
Microsoft SQL - DMO(ODBC SQLState: 42000) Error 18025:xp_test_mapi_profile: failed with mail error 0x80004005
I'm trying to force an anonymous subscription to re-intialize on it's next sync attempt. I can do this from the subscriber no problems, and from the publisher using 'Re-initalize All Subscriptions', but I can't seem to re-intialize only a single subscription from the publisher.
To do this I'm trying to execute sp_reinitmergesubscription using the subscriber details found in the sysmergesubscriptions table. This executes ok and when the subscriber starts to sync it does try to re-initialize starting with generating a new snapshot, but after processing for a while it throws the following error messages:
Error messages: The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147198720) Get help: http://help/MSSQL_REPL-2147198720 An error occurred while reading the .bcp data file for the 'CDP_TableDates' article. If the .bcp file is corrupt, you must regenerate the snapshot before initializing the Subscriber. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199428) Get help: http://help/MSSQL_REPL-2147199428 The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201001)
There doesn't appear to be any shortage of memory on the server. There is no problem regenerating the snapshot from the publisher, and there's no problem with syncing through the web using delta syncs or re-initializing from the subscriber, so I can't see any obvious cause from those error messages.
I'm using SQL Server 2005 SP2 on the publisher, and SQL ServerCE 3.1 on the subscriber.
I have seen several posts on the subject, and have tried various configs. At this point, I am simply trying to connect to SQL Express, that's all.
I have an app. in MS Access that uses SQL Express as a back-end database (this is the simple desktop version of our software). I don't remember having so many issues with just connecting to a small db engine on a single computer..! Just to get it off my chest, there was a post about this subject where someone listed more than 15 items to check... If anyone at Microsoft is reading... connections should not require a 15-item check-list.. People running sql express are not creating a sophisticated database system, probably running it because, they want a free, easy solution, and do not have an IT person, nor are they intersted in reading any 1 of the 15 items... Just trying to connect to the instance of the database that runs on the same computer.... that should not require more than possibly 3 different settings.
My objective at this point, is simply to connect! Nothing else.
My environment settings are:
OS: Win XP Professional MS Access(2003) and SQL Express both installed on the same computer All connection attempts are on the same computer SQL Express is installed in mixed mode SQL Browser running, Network DDE running (if needed) All Network protocols are enabled (tried disabling and enabling each 1 at a time as well) All Client protocols are enabled I tried setting network library to "dbmssocn", and left blank for default (uses namedpipes) I tried using host name, localhost, and IP address for servername (with the SQLEXPRESS of course) Also tried leaving it blank I tried with Integrated security, also tried with the user "sa" and "test" user (both enabled and capable of logging in and accessing the database) I tested the connection from SQL Express Manager, successfully connected in all modes (secure, and with SQL users) to make sure there are no issues with the users or security. Tried turning the SQL browser off (this should not be needed in local mode) Tried using an alias Tried using attach database as a filename And, the firewall is turned off.
Always getting the error "....connection failed because of an error in initializing provider" (whether using namedpipes, or TCP, or shared mem)
Both SQL Express and Access are installed on the computer, that should include the providers...
Please let me know if there is anything left for checking and/or trying... Appreciate your help...
when i right click and execute the package from the Management Studio, it runs fine, everytime. When i schedule a job to execute it, it fails, everytime.
"The package execution failed. The step failed."
i have made sure that the package and job ran using credentials with more than enough access to everything. Still, with no luck. PLEASE! I am at my wits ends here, and the boss is getting antsey...
hi i am using a query with procedure by passing sqlcondition and some parameters to the procedure .its giving full text operation failed or escape seqence not allowed,if i am using the same query individual its giving the result
ex: Individual--its giving the correct result --as it contains special charecters
Select Top 17 DCNewsID,StoryTitle,Author,Source,Location,PubDate,PageNumber,PageName, ArticleName,substring(StoryBody,1,100) as StoryBody,PageTitle from DCNews_Live where Contains(*,' "æ˜Ÿæ´²æ—¥å ±" ') And ( (convert(char(14),PubDate,112) >='20061109' and convert(char(14),PubDate,112) <='20061109')) and PublicationId ='632' order by DCNewsID
--from procedure execution ----the same query
exec ceps_advTop100 'Contains(*,' "æ˜Ÿæ´²æ—¥å ±" ') And ( (convert(char(14),PubDate,112) >="20061109" and convert(char(14),PubDate,112) <="20061109"))','0','0','0','632'
its giving error---Line 1: Incorrect syntax near ''.
i tried by removing the escape sequence also
exec ceps_advTop100 'Contains(*,"æ˜Ÿæ´²æ—¥å ±") And ( (convert(char(14),PubDate,112) >="20061109" and convert(char(14),PubDate,112) <="20061109"))','0','0','0','632'
its giving the error like ---Execution of a full-text operation failed. A clause of the query contained only ignored words.
please any one know the solution for thos let me know
Thanks and regards Ravishanker maduri ravi_maduri_mca@hotmail.com
