I had 3 questions regarding system SPs in SQLServer2008:
1. Does "stored procedures are documented in SQL Server Books Online" in System Stored Procedures (Transact-SQL) have a special meaning or it means that these system SPs have documentation while the others don't?
2. Why the system SPs listed in MSDN are less than the actual ones in SQLServer2008?
3. Is there a list that shows which system SPs are most used?
I have created a store procedure in sql server 2005.
At first, it shows up as a normal user defined store procedure in Object explorer.
Recently, I found I could not found the procedure in normal place. But the execution is fine.
Finally I found it stays under system procedure folder.
How this could happen?
I have a SQL Agent job that runs at 4:15 in the morning. The job has 5 steps, each step only runs if the preceding step succeeds. The second step, which calls an SSIS package that does the main processing, appears to finish as it goes on to the next step; however, when looking in 'View History' there are 2 entries for this step - the first one shows it as still running (Circled Green Arrow) but with a start and end time. The second entry says the job succeeded.
I have been seeing conflicts, such as deadlocks, with later jobs. I suspect this job is causing the conflicts - maybe the package is still running in the background instead of having actually completed?
what conditions a job step my be showing in the job history as both running AND completed successfully?
While attempting to set up sql replication in MSSQL 2005 one of my user databases is now in the systems database folder. I need to move it back to the user databases folder. Any help would be greatly appreciated.
View 16 Replies View RelatedIn which folder under the system tables (syscolumn, sysobjects, etc.) of a database are listed?
View 4 Replies View Relatedhi,I need to display the system names which has sql Server installed. How it can be done in vb.net. Help me plzregardsSomu
View 1 Replies View RelatedHi ,
I need help regarding list of all sql server 2005 system tables
Satish
I've been getting the error below inconsistently when kicking SSIS packages off from a custom windows service. This same service works fine on our development and integration servers but not on our production servers. When I run the packages manually, it works great. Can someone provide any insight as to what is going on?
Error:
The variable "System::LocaleID" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
I have tired the soultions found in http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=211081&SiteID=1 and applied the hotfix http://support.microsoft.com/kb/918091
I'm running SQL Server 2005 on Windows Server 2003 R2 SP2.
Thanks in advance
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
So the output would look like :
CASE_ID VARIABLE
=====================
1 [ABC],[HDR],[GHHHHH]
2 [ABCSS],[CCHDR],[XXGHHVVVHHH],[KKKJU],[KLK]
SELECT
preop.Case_ID,
dbo.Concatenate( '[' + CAST(preop.value_text AS VARCHAR) + ']' ) as variable
FROM
dbo.TBL_Preop preop
WHERE
preop.Deleted_CD = 0
GROUP BY
preop.Case_ID
I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.
However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).
For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).
Something like:
List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac
How can I accomplish this?
I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.
Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?
I wanted to store images in SQL server and using vb.net I wanted to get the dataset from database display the show on web pages with movenext and move forward. Can someone help me how to do this show.
View 3 Replies View RelatedHello,
I have a typical problem in SQL Server 6.5.
We installed a database on Dell6100. Created a database of 300 MB device and 200 Mb of Log device.
After doing Data insertion and deletion operation on the database. It gave sys log full error.
When i check the Device size and Log size availabe both were showing 0.00 MB. But the actual data inserted was less than 2 MB. Then i did a Dump transaction with Truncate_Only and with No_Log also but the output is same.
Then i Ran the DBCC SQLPERF(LOGSPACE)...the output is
Database Name Log Size (MB) Log Space Used (%) Status
-------------------------------------------------------
DB1 200.0 100.0 8
Which means 100 % of Log space is used.
This result is same after restart of the SQl Server.
Can any body help me regarding this
ThanX
__Vijay VM
HI...
I need to do a simple task but it's difficult to a newbie on ssis..
i have two tables...
first one has an identity column and the second has fk to the first...
to each dataset row i need to do an insert on the first table, get the @@Identity and insert it on the second table !!
i'm trying to use ole db command but it's not working...it's showing the error "Insert Value list doest not match column list"
here is the script
INSERT INTO Address(
CepID,
Street,
Number,
Location,
Complement,
Reference)Values
(
?,
?,
?,
?,
?,
?
)
INSERT INTO CustomerAddress(
AddressID,
CustomerID,
AddressTypeID,
TypeDescription) VALUES(
@@Identity,
?,
?,
?
)
what's the problem ??
Hi,
I created one blank ADP to connect default tempdb database on MSDE on server ASHFAQUEPC (name of my msde server). Tested the connection was successful.
I created a table called Testtable from command prompt (MSSQL/Binn) in default tempdb of MSDE using following lines:
…Binn>osql/U sa mypassword
1> use tempdb
1> go
1> Create table Testtable (Cnum integer NOT NULL PRIMARY KEY, City Varchar(15))
1> go
Table Created successfully then I added 2-3 records using following lines;
1> INSERT INTO testable (cnum, city)
1> values (1, ‘abc’)
1> go
1 Record affected and I did same to add 2-3 more records. Then I used following lines to see all the records I entered.
1> select * from testable
1> go
And a list of records displayed at command prompt. After exit from command prompt I found a ‘Testtable’ appeared in the above ADP.
But next day when I opened my pc and opened ADP, I did not found the Testtable even though I re-connected to tempdb on MSDE from File menu. I reached then to command prompt to see whether the table itself is existing. Strange it was not there.
Can somebody tell me how can I get connected to testable automatically when I open my ADP? Where might have gone wrong? Do I need to create table again and input records?
I want to make sure before I do anything with my real dbs.
Any help would be highly appreciated.
With kind regards,
Ashfaque :confused:
If iConn.State = ConnectionState.Open Then iConn.Close()
iConn.Open()
Dim rsBills As New Data.DataSet
rsBills = New DataSet
Dim daBills As New SqlDataAdapter
daBills = New SqlDataAdapter
rsBills.Clear()
Dim cmBills As New SqlCommand
cmBills = iConn.CreateCommand
cmBills.CommandText = "Select OR_no, Billing_mo From dbo.vwBilling Where Month(dbo.vwBilling.Billing_mo)= " & Month(Me.dtto.Value) & " And Year(dbo.vwBilling.Billing_mo) = " & Year(Me.dtto.Value) & " ORDER BY OR_no "
daBills.SelectCommand = cmBills
rsBills.AcceptChanges()
rsBills.Clear()
daBills.Fill(rsBills, "Bills")
Me.DataGridView1.DataSource = Nothing
Me.DataGridView1.DataSource = rsBills.Tables("Bills")
that is my code when this procedure called it shows the real data or records that inserted but when i run my view in server explorer the records that inserted is missing
here is my code in views
SELECT OR_no, Billing_mo, Account_no, Name, Address, Cno, Pres_read, Mprev_read, Sub_read, Pres2, Prev2, SRead2, Mtr_cons, Amount, NPC, Dmem,
Cmem, Tot_bill, D_Pmnt, Class, Newbill, Prd_fr, Prd_to, Type_Pmnt, Type_Date, Type_Docs, wtax
FROM dbo.Billing
same in my base table it seems that no records was inserted when i show the result table, hope you can help me snSQL
RS + SP2
View 5 Replies View RelatedI am not so familiar with SQL Server 2005, but the problem is that when i created a vies and try to save it, instead of the name starting with the dbo. prefix, its starting with my username.
And i just found out that this is not happening only in the view its happening where ever i created an object and try to save it.
How can i change this from my username to make it display dbo. instead.
I think this is why i'm getting permission error when i try to use DTS package.
I have the following code in Script task. However, tablesInFile.Rows is sorted by name in ASCII order. Anyway to get the "natural" order of Excel workbook? Or just the first tab?
connectionString = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=" & excelFileName & _
";Extended Properties=Excel 8.0"
excelConnection = New OleDbConnection(connectionString)
excelConnection.Open()
'tablesInFile = excelConnection.GetSchema("Tables")
tablesInFile = excelConnection.GetOleDbSchemaTable(OleDbSchemaGuid.Tables, New Object() {Nothing, Nothing, Nothing, "TABLE_NAME"}) ' .GetSchema("Tables")
tableCount = tablesInFile.Rows.Count
For Each tableInFile In tablesInFile.Rows
Ok, I want to write a stored procedure / query that says the following:
Code:
If any of the items in list 'A' also appear in list 'B' --return false
If none of the items in list 'A' appear in list 'B' --return true
In pseudo-SQL, I want to write a clause like this
Code:
IF
(SELECT values FROM tableA) IN(SELECT values FROM tableB)
Return False
ELSE
Return True
Unfortunately, it seems I can't do that unless my subquery before the 'IN' statement returns only one value. Needless to say, it returns a number of values.
I may have to achieve this with some kind of logical loop but I don't know how to do that.
Can anyone help?
I have a select list of fields that I need to select to get the results I need, however, I would like to insert only a chosen few of these fields into a table. I am getting the error, "The select list for the INSERT statement contains more items than the insert list. The number of SELECT values must match the number of INSERT columns."
How can I do this?
Insert Query:
insert into tsi_payments (PPID, PTICKETNUM, PLINENUM, PAMOUNT, PPATPAY, PDEPOSITDATE, PENTRYDATE, PHCPCCODE)
SELECT DISTINCT
tri_IDENT.IDA AS PPID,
tri_Ldg_Tran.CLM_ID AS PTicketNum,
tri_ClaimChg.Line_No AS PLineNum,
tri_Ldg_Tran.Tran_Amount AS PAmount,
CASE WHEN tln_PaymentTypeMappings.PTMMarsPaymentTypeCode = 'PATPMT'
THEN tri_ldg_tran.tran_amount * tln_PaymentTypeMappings.PTMMultiplier
ELSE 0 END AS PPatPay,
tri_Ldg_Tran.Create_Date AS PDepositDate,
tri_Ldg_Tran.Tran_Date AS PEntryDate,
tri_ClaimChg.Hsp_Code AS PHCPCCode,
tri_Ldg_Tran.Adj_Type,
tri_Ldg_Tran.PRS_ID,
tri_Ldg_Tran.Create_Time,
tri_Ldg_Tran.Adj_Group,
tri_Ldg_Tran.Payer_ID,
tri_Ldg_Tran.TRN_ID,
tri_ClaimChg.Primary_Claim,
tri_IDENT.Version
FROM [AO2AO2].MARS_SYS.DBO.tln_PaymentTypeMappings tln_PaymentTypeMappings RIGHT OUTER JOIN
qs_new_pmt_type ON tln_PaymentTypeMappings.PTMClientPaymentDesc =
qs_new_pmt_type.New_Pmt_Type RIGHT OUTER JOIN
tri_Ldg_Tran RIGHT OUTER JOIN
tri_IDENT LEFT OUTER JOIN
tri_ClaimChg ON tri_IDENT.Pat_Id1 =
tri_ClaimChg.Pat_ID1 ON tri_Ldg_Tran.PRS_ID =
tri_ClaimChg.PRS_ID AND
tri_Ldg_Tran.Chg_TRN_ID =
tri_ClaimChg.Chg_TRN_ID
AND tri_Ldg_Tran.Pat_ID1 = tri_IDENT.Pat_Id1 LEFT OUTER JOIN
tri_Payer ON tri_Ldg_Tran.Payer_ID
= tri_Payer.Payer_ID ON qs_new_pmt_type.Pay_Type
= tri_Ldg_Tran.Pay_Type AND
qs_new_pmt_type.Tran_Type = tri_Ldg_Tran.Tran_Type
WHERE (tln_PaymentTypeMappings.PTMMarsPaymentTypeCode <> N'Chg')
AND (tln_PaymentTypeMappings.PTMClientCode = 'SR')
AND (tri_ClaimChg.Primary_Claim = 1)
AND (tri_IDENT.Version = 0)
Hi,
I have a a table that holds a list of words, I am trying to add to the list, however I only want to add new words. But I wish to return from my proc the list of words with ID, whether it is new or old.
Here's a script. the creates the table,indexes, function and the storeproc. call the proc like procStoreAndUpdateTokenList 'word1,word2,word3'
My table is now 500000 rows and growing and I am inserting on average 300 words, some new some old.
performance is a not that great so I'm thinking that my code can be improved.
SQL Express 2005 SP2
Windows Server 2003
1GB Ram....(I know, I know)
TIA
Code Snippet
GO
CREATE TABLE [dbo].[Tokens](
[TokenID] [int] IDENTITY(1,1) NOT NULL,
[Token] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
CONSTRAINT [PK_Tokens] PRIMARY KEY CLUSTERED
(
[TokenID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
CREATE UNIQUE NONCLUSTERED INDEX [IX_Tokens] ON [dbo].[Tokens]
(
[Token] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = ON, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
CREATE FUNCTION [dbo].[SplitTokenList]
(
@TokenList varchar(max)
)
RETURNS
@ParsedList table
(
Token varchar(255)
)
AS
BEGIN
DECLARE @Token varchar(50), @Pos int
SET @TokenList = LTRIM(RTRIM(@TokenList ))+ ','
SET @Pos = CHARINDEX(',', @TokenList , 1)
IF REPLACE(@TokenList , ',', '') <> ''
BEGIN
WHILE @Pos > 0
BEGIN
SET @Token = LTRIM(RTRIM(LEFT(@TokenList, @Pos - 1)))
IF @Token <> ''
BEGIN
INSERT INTO @ParsedList (Token)
VALUES (@Token) --Use Appropriate conversion
END
SET @TokenList = RIGHT(@TokenList, LEN(@TokenList) - @Pos)
SET @Pos = CHARINDEX(',', @TokenList, 1)
END
END
RETURN
END
GO
CREATE PROCEDURE [dbo].[procStoreAndUpdateTokenList]
@TokenList varchar(max)
AS
BEGIN
SET NOCOUNT ON;
create table #Tokens (TokenID int default 0, Token varchar(50))
create clustered index Tind on #T (Token)
DECLARE @NewTokens table
(
TokenID int default 0,
Token varchar(50)
)
--Split ID's into a table
INSERT INTO #Tokens(Token)
SELECT Token FROM SplitTokenList(@TokenList)
BEGIN TRY
BEGIN TRANSACTION
--get ID's for any existing tokens
UPDATE #Tokens SET TokenID = ISNULL( t.TokenID ,0)
FROM #Tokens tl INNER JOIN Tokens t ON tl.Token = t.Token
INSERT INTO Tokens(Token)
OUTPUT INSERTED.TokenID, INSERTED.Token INTO @NewTokens
SELECT DISTINCT Token FROM #Tokens WHERE TokenID = 0
return the list with id for new and old
SELECT TokenID, Token FROM #Tokens
WHERE TokenID <> 0
UNION
SELECT TokenID, Token FROM @Tokens
COMMIT TRANSACTION
END TRY
BEGIN CATCH
DECLARE @er nvarchar(max)
SET @er = ERROR_MESSAGE();
RAISERROR(@er, 14,1);
ROLLBACK TRAN
END CATCH;
END
GO
hello all... I have a sql2005express database that I am trying to use a sqldatasource control on. I drop the control on to the page and click the configure data source link. I choose a db connection that I have setup previously. on the next step where you are supposed to select the table or view you want to use I only see views, no tables.
I can use the SQL statement option to get data from the table. and I can drag the table from the database explorer window onto the design surface, which will create all of the sql statements (select, insert,update,delete)
I am using a specific userid to access data but I do not really have any special permissions setup
any help or suggestions would be appreciated. Thanks
This is my syntax which looks valid to me, but the message will never send, need to get the message to send? (@recipients & @from_address are junk here, but valid email addresses in my procedure)
Code:
exec msdb.dbo.sp_send_dbmail
@profile_name = 'DatabaseMail',
@recipients = 'loggedinuser@domain.com',
@body_format = 'HTML',
@from_address = 'SQLEmailAccount@domain.com',
@body = 'Test 12345',
@subject = 'Test Email From SQL Server';
Hi
I'm using an SQL server database to run a website with ASP.
A new page I'm making will only display the contents on fields containing numeric data and it won't display text.
Other pages work fine. Does anyone have any ideas as to why this is happening - I've never seen in before.
Dave
http://pink-football.com/gossip.asp
When I probe sys.dm_exec_sessions (joining with other DMVs to get active-session info) I get the login_name column to be blank for a certain session.
Yet, for the same spid, the Login shows up properly (not blank) when I execute "sp_who2 active".
It also shows up properly in sys.sysprocesses.
What could be the reason for the faulty output of sys.dm_exec_sessions ?
The last page of the report has a table or rectangle (tried both) which is supposed to be invisible based on a parameter. However, the page still shows up with only the header! Apparently the report knows that the next element (table or rectangle) has to be on a new page, and only too late figures out that the element is invisible.
Anybody else encountered this, or has a solution?
Thanks
We just installed the service pack 2 to our server, so I did a select @@version but it's still say Service Pack 1, even though the version number is now 3054. Is that a bug in the service pack?
Thanks.
Hi
I am showing graph in my report as Column Chart .When my graph have more values it shows all values as crowded and look messy.
Is there is any way to restrict values on X axis up to limited number.
so that graph will be seen clearly.
Regards
Pankaj
I can view my reports fine when I go to the preview window, however, when I choose the option to see the 'Print Layout', everything comes up black. The only thing I can see iss my header image.
Does anyone know what could be causing this?
Thanks
Hello!
I'm working with the SQL Server 2005 Developer Edition. When i created a mining structure for association rules and go into the rule by drillthrough there's something i don't understand.
In the SQL Server the data set is:
ID: MM: MF:
47 463 200
And drillthrough shows me:
ID: MM: MF:
47 476 227
Why is the result of drillthrough another than in the table of the SQL Server???
Database shows in read only mode when I did try to restore my database.But How to can I convert it to online mode?
pls help
This is so simple, but I can't get it to work. I created a grouping on the name field so that all entries for a particular person are on their own page. I break out perfectly so each one is a page for where I should get rows for that one person I only get one. On no page do I see more than one row. The data is not being summarized so that does not explain it.
Why would I lose data row? Thanks!