Lookup Based On Results Of Previous Lookups
Feb 17, 2008
i'd like to use ssis on a certain project but am concerned that one of my transformations needs lookup results to be based on actions taken on previous lookups and that the toolkit doesnt really offer something like that.
so, i have a dataflow whose first component extracts certain kinds of data from an xml document.
each row returned by the latter needs a lookup but the results of that lookup may dictate a certain kind of update. The next row's lookup may need to be influenced by the previous row's update.
So I think I have two challenges, 1) combining a lookup and update, 2) making sure the buffer architecture completes one lookup and update before the next lookup begins.
View 7 Replies
ADVERTISEMENT
Jun 27, 2007
Hi All,
Actually this is in regard to SCD Type 2 Dimension, Scenario is like that I am moving Fact table from some old source and I have dimensionA description value in fact which I want to replace with appropriate id from Dimension Table and that Dimension table is SCD Type 2 based on StartDate and EndDate and Fact Table doesn't contains direct date value rather there is timeId in Fact so to update the value in Fact table I have to Join Time Dimension table and other Dimension Table to replace fact Description with proper Id.
Lets assume DimensionA Structure
id
Description
StartDate
EndDate
Fact Table
id
measure1
measure2
TimeId
Description
Time Dimension
TimeId
Date
Day
Hour ...
View 1 Replies
View Related
Apr 11, 2014
I am trying to code a rule at the moment which sets a value based on the value of the previous row. This is as far as I have got so far. I am trying to run it as a set based command and I believe I may need to make use of a numbers table.
Anyway the code is....
declare @data table
(ID int identity(1,1),
DeviceID int,
EventTypeID int,
EventID int)
[Code] ....
So the output is currently incorrect. Each DeviceID needs to have a ID assigned to the MIN(ID) which isn't yet in the code above. This ID has to be sequential across the full table and not dependent on ID.
Next the rule is coded in the case statement above.
So for each DeviceID, when the EventType goes from 1, 2 or 4, to 0 or 3, the following record after the 0 or 3 will have a new EventID. And conversely when the EventType goes from 0 or 3 to 1,2, or 4, the record that is the 1, 2 or 4 will have a new EventID.
View 6 Replies
View Related
Dec 7, 2011
After a successful transaction (after committing), I found that i sent wrong records of one the column (wrongly updated). How do I get back my initial stage? I mean, how do I get back all the previous results? Is there a way to retrieve my previous data which were before committing a transaction?
View 1 Replies
View Related
Jan 11, 2005
I'm storing records that contain a date/time data type. I am needing two links on a reports page (asp), the first should return all records for the current month and the second link should return all records for the last three months (including current month). I have no idea how to just sort by month.
I'm also not sure what to include here in this post to help you answer my question. On the form that is submitted initially the text field is named "txtSubmitDate" and in the database it's stored in a field called "submitdate" and is 8 characters in length.
I've tried:
'SELECT TODAY'S MONTH
SqlJunk = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE())-1"
'SELECT TODAY'S MONTH and the last 2 months
SqlJunk2 = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE()) OR MONTH(submitdate) = MONTH(GETDATE())-1 OR MONTH(submitdate) = MONTH(GETDATE())-2 ORDER BY submitdate ASC"
These are not working because it can't handle the change in year (going from january 2005 back to december 2004, etc).
Any ideas?
View 7 Replies
View Related
Jul 6, 2014
I am pretty new to SQL and facing difficulties with a current problem.
I have a list of customers and a sequence of events they have triggered . I know the sequence in which these events have been triggered and only want to increment a value when a new event is triggered (value to remain the same if the event is the same). I have come close to a solution with Dense_rank but the problem here is that the ranking doesn't reset if the same even previously triggered is triggered a bit later in the sequence. see below an example of current results and expected results:
Customer ID,Sequence ID,event,current result,expected result
1,1,A,4,1
1,2,A,4,1
1,3,B,3,2
1,4,C,2,3
1,5,A,4,4
1,6,A,4,4
1,7,E,1,5
1,8,D,5,6
2,1,B,3,1
2,2,C,2,2
2,3,C,2,2
View 8 Replies
View Related
Dec 2, 2014
I'm trying to only show yesterday's data based on a date that is stored as a varchar. I converted it to smalldatetime but I'm getting an error that says "Conversion failed when converting date and/or time from character string." I don't know how I have to alter the conversion.
Here is my code:
CONVERT(varchar(20), CONVERT(date, CONVERT(varchar(8), date_added), 112),110) = dateadd(day,datediff(day,1,GETDATE()),0)
View 10 Replies
View Related
Jan 18, 2007
I need to write a t-sql query that will take the value of the previousrecord into consideration before calculating the current row's newcolumn value...Here's the situation...I have a query which return the following table structure...Full_Name Points----------------- ------------Name1 855Name2 805Name3 800Name4 775Name5 775Name6 741etc.... etc...I need to create a calculated column that tells me where the personranks in point position. The problem i run into is that in thesituation where two or more people have the same point value i need thecalculated rank column to display the same rank number (i.e. 4th orjust "4") I'm not sure how to to take into consideration the previousrow's point value to determine if it is the same as the current onebeing evaluated. If i new they were the same i could assign the samerank value (i.e. 4th or just "4").If any one has any insight that would be great.ThanksJeremy
View 2 Replies
View Related
Jul 25, 2015
Below is the resultset I got using the following SQL statement
SELECT ROW_NUMBER() OVER (PARTITION BY ID ORDER BY create_date DESC) AS RowNum
,ID
,create_date
,NULL AS end_date
FROM dbo.Table_1
Resultset:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 NULL
[Code] ....
Now, I want to update the end_date column with the create_date's values for the next row_number. Desired output is shown below:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 2015-02-18
[Code] ....
View 4 Replies
View Related
Aug 21, 2015
I have a scenario to compare previous records based on each ID columns. For each ID, there would be few records, I have a column called "compare", We have to compare all Compare 1 records with Compare 0 Records. If Dt is lesser or equal to comparing DT, then show 0. Else 1
We always only one Compare 0 records in my table, so all compare 1 columns will compare with only one row per ID
My tables look like
Declare @tab1 table (ID Varchar(3), Dt Date, Compare Int)
Insert Into @tab1 values ('101','2015-07-01',0)
Insert Into @tab1 values ('101','2015-07-02',1)
Insert Into @tab1 values ('101','2015-07-03',1)
Insert Into @tab1 values ('101','2015-07-01',1)
Insert Into @tab1 values ('101','2015-06-30',1)
Insert Into @tab1 values ('102','2015-07-01',0)
Insert Into @tab1 values ('102','2015-07-02',1)
Insert Into @tab1 values ('102','2015-07-01',1)
select * from @tab1
1.) In the above scenario for ID = '101', we have 5 records, first record has Compare value 0, which mean all other 4 records need to compare with this record only
2.) If Compare 1 record's Dt is less or equal to Compare 0's DT, then show 0 in next column
3.) If Compare 1 record's Dt is greater than Compare 0's DT, then show 1 in next column
My expected result set should be like ....
View 10 Replies
View Related
Jul 11, 2013
I have a table "Ratings" in which I store rating categories like the following:
FROM TO Rating
1 10 1
11 20 2
21 30 3
In another table "Results" I have the actual results like:
Employee ID Results Rating
120 6 ?
130 18 ?
Now I would like calculate the rating in the results table in the rating column (where "?" in the above example)
How can I do that with an SQL update command - maybe using a Case statement - but I don't know how to do that by looking up values from another table...
View 5 Replies
View Related
Nov 3, 1999
I do appreciat your help, I want to run a store procedure which will show 6 months . I do not know how to write the procedure, here in the notion in my mind, I want to be able to pass an input parameter (month) to the procedure which will then run a query to show 6 months prior the input parameter month, how can I do that, thanks for your help
Ali
View 2 Replies
View Related
Apr 24, 2015
I am pulling down out of range values from a single table on one database to a different table on a different database on a different server (one i have full access to). Basically, it looks something like this:
id1 value1 prev_value1 value2 prev_value2 date prev_date
id2 value1 prev_value1 value2 prev_value2 date prev_date
id3 value1 prev_value1 value2 prev_value2 date prev_date
all the "prev"'s are null. I want to do one do one query that will get me the previous values and dates for each id from the original database. how to do this.
View 0 Replies
View Related
Jul 7, 2015
I have a data that with month values ranging from jan 2012 till july 2013 with some values associated with it.
I want to generate months automatically after july 2013 till december 2013 in sql something like the below one:
Is there a way in sql to do this?
View 2 Replies
View Related
Jul 28, 2014
I need to get previous month data in the table based on current date.
In case of execution of each month, the data for previous month should come with date as between
create table TestDate
(Sno Int,
Name varchar(100),
DateofJoin datetime)
insert into TestDate values (1,'Raj', '2/21/2014')
insert into TestDate values (1,'Britto', '6/12/2014')
insert into TestDate values (1,'Kumar', '5/14/2014')
insert into TestDate values (1,'Selva', '6/27/2014')
insert into TestDate values (1,'Ravi', '5/2/2014')
insert into TestDate values (1,'Gopu', '6/2/2014')
/*
if I execute in month July ( ie: today)
select * from TestDate where dateofjoin between 1-june-2014 and 30-june-2014
Result
5 Ravi 2014-05-02 00:00:00.000
3 Kumar 2014-05-14 00:00:00.000
if I execute in month June
select * from TestDate where dateofjoin between 1-may-2014 and 30-may-2014
Result
6Gopu2014-06-02 00:00:00.000
2Britto2014-06-12 00:00:00.000
4Selva2014-06-27 00:00:00.000
/*
View 1 Replies
View Related
Jul 17, 2006
This doesn't seem possible but I'll ask anyway...
Can I build a lookup task where the lookup query is based on a variable, rather than hardcoding the SQL staement?
View 3 Replies
View Related
May 21, 2007
My lookup data is in a csv file, not a table. Is there a way to get the Lookup transformation to use the csv file as the source 'table'? Obviously the alternative is to load the file into a SQL Server table and use that, but I want to keep it simple if possible.
View 4 Replies
View Related
Nov 20, 2007
I'm either missing something or this is a bug. I have a Lookup that finds no matches if I use the default option of full caching (everything on the Advanced tab unchecked). The lookup table is relatively small (15348 bytes) in only 544 rows. If I check only the Enable Memory Restriction box and eliminate caching, it works fine. I can also check the Enable Caching box and accept the default cache size of 5MB and it works fine. Anyone have any ideas? I'm running on Standard Edition, SP2.
Thanks!
View 7 Replies
View Related
Dec 19, 2014
I have a requirement regarding a color combination data. I have a lookup table that holds a colorid, p1, p2, p3, p4 to p8 which will be having colors Red, Green and Amber. P1 to P8 columns holds these three colors based on their combinations.
I have attached the look up table data for reference.I need to pass the color values to p1 to p8 and need to retrieve the color id based on the passed color. If we pass values for all p1 to p8 then it is easy to get the color code, however it will not happen. The passed values may be dynamic. ie we will not have all 8 values all the times. sometimes we will have 2 colors passed, sometimes 5 colors will be passed.
If i pass only two colors say red and red, i need the color id of only the row that has red and red for p1 and p2 alone. i dont want want all the colorid's that has red and red in p1 and p2 and some other colors in p3 to p4.
The exact colorid of the combination must be returned on passing the values to p1 and p2.I am passing Red and Red as values to P1 and P2. In the look up table we can have 10 rows that has red and red i p1 and p2 like
colorid p1p2p3p4p5p6p7p8
1 redred
10 redredred
20 redredred
30 redredredred
40 redredredredred
50 redredredredredred
60 redredredredredredred
70 redredredredredredredred
So the result must have only the colorid 1 and not all the colorid's listed above. when I pass 3 red as values for p1, p2, p3 then the result must be 10. Colorid 1, 20, 30, 40, 50, 60 and 70 must not come in the result.I need a function or procedure that will accept the arguments and provide me the result based on the values.
View 2 Replies
View Related
Jun 19, 2008
Here's one thats had me and a coworker puzzled. Hopefully it's something simple:
TABLE A: (log of messages)
userid, int
date, datetime
message, varchar(50)
Table A Data:
1, 6/18/2008 @ 2:32:41, This is my message
1, 6/18/2008 @ 2:31:02, This is my message
1, 6/17/2008 @ 7:34:26, This is another message
2, 6/18/2008 @ 2:32:41, This is not his message
2, 6/16/2008 @ 11:21:32, This is my message
TABLE B: (List of users)
userid, int
name, varchar(100)
Table B Data:
1, John
2, Mike
I want to extract the most recent message logged per user, i.e.:
name | date | message
--------|---------------------|-------------------------
John | 6/18/2008 @ 2:32:41 | This is my message
Mike | 6/18/2008 @ 2:32:41 | This is not his message.
I have been unable to come up with a query that can return just the one value. I've tried variants of:
SELECT DISTINCT b.name, a.date, a.message
FROM a INNER JOIN
b ON a.userid = b.userid
including sub-queries and even played with the visual diagrams trying to design this in Enterprise Manager but none of the combinations I tried work. Is there an easy way to do this via a query? I don't have experience with stored procedures. Would that be necessary?
TIA
View 4 Replies
View Related
Feb 6, 2008
Hello,
I'm trying to update FOR_SORTING to 1, for all instances of a RESPONSE_ID when QUESTION_ID = YESNO and RESPONSE = Yes.
So, for below I'm trying to update FOR_SORTING to 1, for RESPONSE_ID that has Question_ID that is equal to YESNO and Response equals Yes.
No. RESPONSE_ID QUESTION_ID RESPONSE FOR_SORTING
1. 1 RATING Incredible
2. 1 YESNO Yes 1
3. 2 RATING Incredible
4. 2 YESNO No
The Table is called LSN_RESPONSE_DETAILS
I tried the following, but it only updates the one row.
UPDATE LSN_RESPONSE_DETAIL
SET FOR_SORTING = '1'
WHERE QUESTION_ID = 'YESNO' and 'RESPONSE = 'Yes'
Any idea's?
View 3 Replies
View Related
Mar 3, 2005
Hi,
I don't know if anyone has encountered this before but here goes:
I've a select clause below:
result = "Select * from person where LocalName LIKE N'" + queryLocalName + "'"
queryLocalName is an input field that allows the user to search for non-English characters in the database.
What I'm wondering is what kind of effect is the N in the where clause is having?
I can't seem to get it to work when doing it via the web. I've tested in the database itself, got it to work using the SQL Analyser but when testing on the web, it can't find because ? are appearing in the result.
View 2 Replies
View Related
Nov 19, 2006
Hello~,
The table has columns like this.
________________________________
time smalldatetime
value1 int
value2 int
----------------------------------------------------------
for example,
....
'2006-11-16 12:00:00',100,200
'2006-11-16 13:00:00',110,210
'2006-11-16 14:00:00',120,220
....
The record is inserted at every hour.
I want get daily,monthly,yearly average and display the result ordered by time.
View 1 Replies
View Related
Oct 19, 2007
I want to write a stored procedure that takes two three paramters based on a case statement determining which values are null something like this
Select InformationDate From thisTAble
Where
If @dateValue IsNot @Null
Informationdate = @dateValue
Else
Where
In this second where cluase I want to be able to pull out all the results based on a date range and i am not sure how the syntaz would go
InfomationDate IsBettween @daterangeFrom @dateRangeTwo
Any help on this i hope i was clear...thank you!
View 7 Replies
View Related
Mar 18, 2008
I have a stored procedure which selects results based on some date calculations.
In my table I have a status column and two date fields (Approval Date and Signature Date)
If the value in the status column says approved I want to select results where approval date - signature date is less than a certain number of days.
If the status is naything other than approved i want to select results where sysdate - signature date is less than the given number of days.
How can i achieve this?
View 3 Replies
View Related
Feb 23, 2007
I have the following code which is incomplete. Where it says: txtVendorID = I need it to equal the results of the field VendorID from my query...here is my code. What do I need to add there?
Dim cmdSelect As SqlCommandDim intRecordIDintRecordID = Request.QueryString("RecordID")strConn = ConfigurationManager.AppSettings("conn")conn = New SqlConnection(strConn)cmdSelect = New SqlCommand("spMfgRepListAddaspxByRecordID", conn)cmdSelect.CommandType = CommandType.StoredProcedurecmdSelect.Parameters.AddWithValue("@RecordID", intRecordID)conn.Open()cmdSelect.ExecuteReader()txtVendorID.Text = conn.Close()
View 2 Replies
View Related
Jun 18, 2008
I've managed to get my query to this: Product | Color | Votes
======== ======= =======
Bus Red 10
Bus Blue 5
Train Blue 1Car Red 1
Car Blue 1
I need the most popular color of the product based on the votes for each product, so MAX(Votes) GROUP BY Product solves the Bus and the Train, but I still need a result for the Car? Not really that bothered which Color is picked up, do I need to run another query, because I need another table to join to the results.
Any help would be greatly appreciated.
Thanks, Pete.
View 2 Replies
View Related
May 5, 2008
Dear Pals,
I have small requirement in my project.
I need to display the results of the WHERE clause based on percentage/ranking of exact match.
I mean the result set should be displayed based on percentage match.
For example i have the below table.
create table test
(
id int identity(1,1) primary key,
ename varchar(10)
)
insert into test(ename) select 'REG'
insert into test(ename) select 'xyz'
insert into test(ename) select 'abc'
insert into test(ename) select 'Reg'
insert into test(ename) select 'Regsxysn'
insert into test(ename) select 'psReg'
I need the output something similar as below
REG
Reg
Regsxysn
psReg
I have tried out with full text indexing but i could'nt get the required output.
Any suggestions would be appreciated.
Thanks in Advance.
View 1 Replies
View Related
Feb 25, 2015
I am trying to take the results of a query and re-orient them into separate columns.
select distinct
W_SUMMARYDETAILS.FACILITY_ID,
W_SUMMARYDETAILS.REPORTING_YEAR, (2011 - 2014, I want these years broken out into columns for each year)
W_SUMMARYDETAILS.FACILITY_NAME,
W_DEF_SUMMARYDETAILS.REPORTING_PERIOD (2011 - 2013, I want these years broken out into columns for each year)
From W_SUMMARYDETAILS
full outer join W_DEF_SUMMARYDETAILS
on W_SUMMARYDETAILS.FACILITY_ID=W_DEF_SUMMARYDETAILS.FACILITY_ID and
W_SUMMARYDETAILS.REPORTING_YEAR=W_DEF_SUMMARYDETAILS.REPORTING_PERIOD
As of now the query puts all the years into a single column -- one for DEF_SUMMARY and another for SUMMARY.
I am looking to create 7 additional columns for all the individual years in the results instead of just two columns.
View 9 Replies
View Related
May 5, 2008
Dear Pals,
I have small requirement in my project.
I need to display the results of the WHERE clause based on percentage/ranking of exact match.
I mean the result set should be displayed based on percentage match.
For example i have the below table.
create table test
(
id int identity(1,1) primary key,
ename varchar(10)
)
insert into test(ename) select 'REG'
insert into test(ename) select 'xyz'
insert into test(ename) select 'abc'
insert into test(ename) select 'Reg'
insert into test(ename) select 'Regsxysn'
insert into test(ename) select 'psReg'
I need the output something similar as below
REG
Reg
Regsxysn
psReg
I have tried out with full text indexing but i could'nt get the required output.
Any suggestions would be appreciated.
Thanks in Advance.
View 3 Replies
View Related
Sep 26, 2013
I am trying to write a report that gives me a list of all enquiries based on top 10 people who received it the most.
The fields are:
enquiry.enquiry_number
enquiry.enquiry_time
officer.officer_name
What I want to do is run the report which details each enquiry each officer has received but stop running once top 10 officers have the most enquiries are in the results.
The officers are identified using the officer.officer_name field, enquiry.enquiry_number field shows each enquiry record.
View 5 Replies
View Related
Mar 27, 2007
Hi,
I have a report which lists out the employees' details. I need A-Z links above the report, On clicking on an alphabet, say "C", should display all the employee details whose name starts with the selected alphabet. In the stored procedure we can accept the character and return back those results. But it is not a drill report and we need the result in the same report. Is there any way so that on clicking each link, the output will be shown in the same report. Any help is appreciated.
Thanks in advance,
Sonu
View 4 Replies
View Related
Jul 24, 2015
Update statement based on the results from this SELECT:
SELECT RELQ_REL_VERSION_NM,
RELQ_RELEASE_Q_ID,
RELQ_STATUS_CD,
RELSP_RELEASE_STEP_ID,
RELSP_STEP_TYPE_CD,
RELSP_STATUS_CD
FROM RELEASE_QUEUE WITH (NOLOCK)
[Code] ....
I need to update all records where the
RELEASE_STEPS.RELSP_STATUS_CD = 'SKPD'TORELEASE_STEPS.RELSP_STATUS_CD = 'CMPS'
I imagine that the UPDATE statement will be something like:
UPDATE RELEASE_STEPS SET dbo.RELEASE_STEPS.RELSP_STATUS_CD = 'CMPS'
WHERE (
SELECT RELQ_REL_VERSION_NM,
RELQ_RELEASE_Q_ID,
RELQ_STATUS_CD,
RELSP_RELEASE_STEP_ID,
RELSP_STEP_TYPE_CD,
[Code] .....
View 4 Replies
View Related
