Select Backup Location -- Cannot Verify The Existence
Sep 15, 2007
When attempting to backup a database using Management Studio, I receive a ""Cannot verify the esistence of the backup file location. Do you want to use the backup file location anyway?" yes/no messsage afer entering a file directory which exists. When entering a new directory, when I select "yes," a file locaiton will not be created, however, the backup operation continues to success. Originally, I had configured the sql services to execute under a user account with domain admin and administrative privledges, and I vverified the folder's security config permited write access. I reinstalled and now al SQL services are executing as "Local System" (or "Network Service") with same problem.
Any recommendations as to how to correct what I am doing wrong? (Thanks).
Jamie
__________________________
SQL Server Enterprise 2005 running w/all patches on Windows Server 2003 Server.
1) Need a simple routine or system function for testing for or verifying the existence of a file or folder on the local server's file system. Returning a simple boolean value or 1 or 0 would be fine.
2) Need a syntax and use description of the new "master.dbo.xp_create_subdir" function ... anyone have some documentation or links? MS technet and MSDN have nothing.
We have a critical Production database on which we want to setup Log-Shipping. We have also purchased the Symantec NetBackup utility for taking Backup to Tape Drives. We Know that there are some inherent problems with using Log-Shipping and a Backup Strategy together, and thus we were finding out various ways in which we can run both in tandem.
One of them was taking the Symantec Log backups with Copy-Only option. The main problem with this is that the Symantec Backups becomes dependent on the Log-Shipping Backups and also most of their Log-Backups become useless. Also, we are not sure whether the utility allows Copy-Only backups
The second alternative was to disable the Backup job of Log-Shipping on the Primary Server and to use the Log-Backups done by the Symantec utility for performing the Restores on the Secondary.
Thus, if Log-Shipping is scheduled to run say every 4 hrs, and the Symantec Log-backup happens every 1 hour, then at an interval of every 4 hrs, the Restore Job on the secondary will pick up the 4 backups done by the Symantec Backup utility and Restore each one of them in sequential manner. But, I guess it is not easy to have a manual Restore Policy in place. I was really banking on this solution until I found that the Restore Job of the Log-Shipping setup is dependent on the Filename of the Transaction log file which the systems generates automatically, and it won€™t be easy to create a customized Restore Job on the secondary server which takes in all the Log Backups generated by the Symantec Backup utility and Restore the Secondary database.
Have any one of you ever face this issue? Would like to know what is the best way to keep both of them running together.
I've written a custom script to delete backup files from location. But unable to modify now to count the number of files are deleted. How to modify the script...
/* Script to delete older than N days backup from a specific directory */
USE [db_admin] GO IF OBJECT_ID('usp_DeleteBackup', 'P') IS NOT NULL DROP PROC usp_DeleteBackup GO
Does any baby offer command to verify if database backup is completed? In backup wazard, there is an option "Verify backup upon completion" . Is there the SQL command? Thanks.
As to not get lost in the details of my problem, I'm oversimplifying this posting to get the root of my problem answered. :-)
Let's say a database has a table called CUSTOMERS, and it may or may not contain a column called ORDER_NUMBER, depending on whether or not the database is an old or new database.
Now if I run the following query in Query Analyzer (v8)...
if (1=2) begin select * from CUSTOMERS where ORDER_NUMBER is not null end
...I get "Invalid column name 'ORDER_NUMBER'."
Obviously 1 does not equal 2, so why is the code in that if block being executed? Or is there some sort of precompilation/schema checking that is going on which is causing the error? If so, can I set something to not have the code be precompiled?
It is very intersting to find out that when we are backuping a database we are not able to specify a shared folder .Why?Is it because security concern or it is idenfied as bug or is there any work around.Only thing we are able to specify is that it points to the local drive of the particular server. Help would be more appericated.
Hi again,I am able to schedule a backup and default it to the server. However, isthere an option or a way to locate the backup somewhere else on the network?regards,gilbert
Is the name of the most recent backup file for each database stored anywhere in SQL2K? I want execute a SQA job periodically that takes the BAK from database A and restores it over database B (using the T-SQL RESTORE DATABASE procedure), but I need to know the exact name of the .BAK file; i.e. I need to know the yyyymmddhhmm value at the end of that file.
I need to back up about 50 databases that are currently sitting on MARS. Every saturday they will be backuped so that they can be moved to HOMER
Pls help as I don't know where to start
BTW..I have also set up the SQL Maintenance wizared Backup procedure which copies to the local server but I want to be able to move the database files to HOMER (another server) so eventually they are backed up by TAPE
i have a copy of a SQL Server 2000 database on an external hardrive.I have SQL Enterprise Manager 2005 on my laptop and was wondering ifit is possible to view the backup on my laptop when external harddrive is plugged in.What other software/tools/procedures do i need to do to make thebackup "viewable"RegardsSteve F
I want to change the default backup location of MSSQL. I know we can configure it while installing. But I want to change the default backup location of a particular database, running on a database server.
The default location is like. Program FilesMicrosoft SQL ServerMssqlBackup
My customers are having problems to restore their own db.
They use SQL Server Management Studio and when they try to restore their db from a device and add the backup file an error message comes up stating that the user does not have permission to C:Program FilesMicrosoft SQL ServerMSSQLBackup.
How can I set a different backup location for each user?
SQL Server service accounts; the default (and recommended) service account is NT ServiceMSSQLServer virtual service account - which is shown as MSSQLSERVER locally - if you want to assign permissions to a local location. Fine, that's OK, works.
For network resources, as far as I understand it (or think I do, anyway), a virtual service on a box is made visible to the network using the <Domain><Computer>$ credential. Eg for box Bimble on Domain Wimble - if I want to give access to a directory on backupServer1, I simply assign rights to WimbleBimble$ and SQL Server should get those rights.
This, or so I thought, should allow SQL Server access to that location. The thing is, when trying to access that location, it's throwing an access denied error. But it works fine with LocalSystem.
Do I need to do some additional configuration to allow the Virtual Service account to be shown via <Domain><Computer>$ ?
When I select All Actions>Backup Database and then click the ... button to choose a location on the hard drive, SQL Enterprise Manager Hangs and I have to kill it from Task Manager.
All other areas of EM browse the disk drive without a problem. (DTS, File Groups, etc.)
I downloaded Quest Software's freeware version ofComparison Suite. When I attempt to install, it tellsme that it requires .NET framework 1.1.4322. I alreadyhave .NET 2.0 installed (as part of the MS-SQL native client install)and I really don't want to mess that up.Is it *safe* to have the installer download/install .NET 1.1to coexist with 2.0? Is it likely to work?
Can someone show me some C# code for detecting if a SQL row exists or not? This seems like a very typical action and I cannot for the life of me find a tutorial online that explains this step. In my code I'm either going to INSERT or UPDATE a record. I tried sending a SELECT command through a ExecuteNonQuery, but only got -1 as a response. Apparently ExecuteNonQuery does not work with SELECT. I then saw that T-SQL has an EXISTS keyword, but I cannot see anyway to use that from within C#.So...can anyone share the typical code they use to identify if a row exists or not within a database. I guess I was execting there to be some method available to do this sort of thing.
Hi Friends,I have one table in the databse,i.e userTable with one field userNameIn my form I have one Label ,textbox for entering the userName and One button for submit,So I am entering the data into the table(userTable) after clicking on the submit buttonBut my problem is before entering the data into the table I want to find wheather the given data exits or notif its not exists the data has to insert into the table otherwise its has to display the message"the user is already existed"for this I wrote the code like this in C# public Boolean isUserExists() { SqlCommand cmduserName = new SqlCommand("select count(*) from userTable where userName= " + txtuserName.Text + ")", conn); SqlDataReader rdr = null; rdr = cmduserName.ExecuteReader(); conn.Open(); int count = 0; while (rdr.NextResult()) { count = rdr.GetInt32(1); } conn.Close(); if (count == 0) { return false; } else { return true; } protected void Button1_Click(object sender, EventArgs e) { if(isUserExists()) { Response.Write("Opps ! User already Exists"); } SqlCommand adapInsert = new SqlCommand("insert into userName values('" + txtuserName.Text + "')",conn); conn.Open(); adapInsert.ExecuteNonQuery(); conn.Close(); Response.Write("data inserted"); } is it write or not because I am not getting the output .please tell me any one where I have to change the code ThanksGeeta
We are currently running MS-SQL 6.5 and are getting new apps which require 7.0. The new apps will be on their own server(s). My question is - Can a PC run both the 6.5 client and the 7.0 client (simultaneously) to access both 6.5 and 7.0?
Does anyone know where to find the property that disables the broadcast of the sql server from the point where you do not see the server show up in the list when one goes to
"New SQL Server Registration" -> "..."
beside the "Server" field. The dialog itself is titled "Registered SQL Server Properties". Assume both SQL Servers are both behind the firewall.
How is it possible to test at the beginning of a stored procedure if acursor I want to declare already exists? (So I don't cause an error bydeclaring it).ThanksBruno
I'm looking for an efficient t-sql script to loop through all usertables in a db and determine/print the value of each row having adatetime field (including cases where there are multiple datetimefields per row)Help greatly appreciated..
I have a webpage where users can connect with other users by sending them a request. Sending the request just puts a row in a connect table that contains the users id, the targetusers id, a requesteddate, an accepted date and a disconnectdate (for the original requester to end the connection and a reject bit the the target can reject the request. Hoever I need to check to assure that the connect does nt already exist either as pending (requestdate is not null and accept date is null) or both dates are not null (connection already complete.).
ALTER PROCEDURE [dbo].[requestConnect] -- Add the parameters for the stored procedure here @requestor int, @requested int AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from interfering with SELECT statements.
I wanted to know how do I know or check that whether a column exists in a table. What function or method should I use to find out that a column has already exists in a table.
When I run a T-SQL script which i have written does not work. Here is how I have written:
IF Object_ID('ColumnA') IS NOT NULL ALTER TABLE [dbo].[Table1] DROP COLUMN [ColumnA] GO
SELECT dnn_Roles.RoleName, xyzUser.FirstName, xyzUser.LastName, xyzUser.Email, xyzRewardPoint.Points, xyzRewardPoint.RewardID FROM xyzRewardPoint INNER JOIN xyzUser ON xyzRewardPoint.UserID = xyzUser.UserId INNER JOIN dnn_UserRoles INNER JOIN dnn_Roles ON dnn_UserRoles.RoleID = dnn_Roles.RoleID ON xyzUser.ProviderId = dnn_UserRoles.UserID WHERE (dnn_UserRoles.RoleID = 3) OR (dnn_UserRoles.RoleID = 4) OR (dnn_UserRoles.RoleID = 6) ORDER BY dnn_UserRoles.RoleID
What I need is to extend this query to detect any users who exist in dnn_UserRoles.RoleID 3, 4 or 6 but do not have a RewardID value of '43' in the xyzRewardPoint table.
Apologies if this has been answered before, but the "Search" function doesn't seem to be working on these forums the last couple of days.
I'd just like to check if a table already exists before dropping it so that I can avoid an error if it doesn't exist. Doing a web search, I've tried along the lines of "If (object_id(sensor_stream) is not null) drop table sensor_stream" and "If exists (select * from sensor_stream) drop table sensor_stream"
In both of these cases I get the error: "There was an error parsing the query. [ Token line number = 1,Token line offset = 1,Token in error = if ]"
Sooooo... what is the standard way to check for existence of a table before dropping it? Someone help? This seems like it should be simple, but I can't figure it out.
