Here is the alter statement that I am trying to use to create a relationship between 2 tables. This does not seem to work on mobile. What am I doing wrong?
ALTER TABLE [SubCategory] CONSTRAINT [FK_SubCategory_Category] FOREIGN KEY([CategoryID])
REFERENCES [Category] ([CategoryID])
ON UPDATE CASCADE
ON DELETE CASCADE
This is the error:
There was an error parsing the query. [ Token line number = 1,Token line offset = 27,Token in error = CONSTRAINT ]
looking for necessary syntax to alter table id to autoincrement adding identity statement, not sure on syntax for seed an increment, or if it is possible at all.
I am trying to add a column with Alter Table, like this:
ALTER TABLE myTable ADD newColumn bit DEFAULT 0 NOT NULL
This works fine with SQL-server 7, but I get this error in 6.5:
'ALTER TABLE only allows columns to be added which can contain nulls. Column 'newColumn' cannot be added to table 'myTable' because it does not allow nulls.'
I also found this in the help files:
'Columns added to a table must be defined as NULL. When a column is added, the initial value for the column will be set to NULL. This restriction forces the ALTER TABLE statement to fail if the bit or timestamp datatypes are used.'
My question, is there any other way to do this on 6.5 ?
I'm trying to create a batch sql script which first alters some existing tables via the ALTER TABLE command, I then want to alter some existing stored procedures via the ALTER PROCEDURE command within the same batch. I have found that I can encompas the alter table scripts within a conditional IF EXISTS (Begin/End) but not the alter procesdure scripts. I have looked in reference material and have found nothing to suggest this type of operation is not possible. Is this possible? Is this a know bug fixed by a service pack?
My client's website database is hosted by a third party. I need to alter one of the column definitions for the largest table in the database. Unfortunately, the transaction log fills up if I try to alter the table. I've done all the usual stuff like truncating the log, etc., but the simple fact is that the operation requires more log space than we have available. Therefore, we need to purchase additional disk space for the database. What I'm looking for is a way to roughly estimate how much log space will be required to alter this table so that we purchase enough but not too much additional space. The table has an identity primary key and 4 other single column indexes: one int, one datetime and two varchar(30) columns. Any suggestions? Thanks in advance.
I have coded an alter statement for adding a column to a temp table inside an sp,but it skips the alter statement while executing the sp! This happens even if I run the same code on query analyzer too. If I use 'GO' statement before the alter command,then it works fine on Query Analyzer.But, I can't use 'GO' in an sp. I am using the sa account. Any ideas on how to fix this?? Thanks. Di.
It is possible to alter multiple columns within a single alter table statement? I have got the following URL that tells it is not possible to alter multiple columns within in signle alert table statement. http://www.blogcoward.com/archive/2005/05/09/234.aspx[^] Does anyone know about that?
Im working on Partition purge process, where I need to specify following statement:
SET @cmd = 'ALTER PARTITION FUNCTION ' + @function_name + '() MERGE RANGE (@range)' EXEC (@cmd); SET @cmd1 = 'ALTER DATABASE '+ db_name()+ ' REMOVE FILE ' + @partition_file EXEC (cmd1);
I want to put this statement in Begin Tran /Commit statement but getting error that it is not allowed. "ALTER DATABASE statement not allowed within multi-statement transaction"..what are my options to rollback in case there is a failure.Â
I have written the following code: Â SET NOCOUNT ON DECLARE @RowCount int; SET @RowCount = 0; Begin Try Begin Transaction -------------------------------------------------------- -----Table Name: AlertsStaticRecord_Archive -----Column Name: AlertID -------------------------------------------------------- ALTER TABLE Â [AlertsStaticRecord_Archive] Â ALTER COLUMN [AlertID] int NOT NULL;
[Code] .....
But, when I execute these batch, I am getting error:
Msg 8111, Level 16, State 1, Line 11 Cannot define PRIMARY KEY constraint on nullable column in table 'AlertsStaticRecord_Archive'. Msg 1750, Level 16, State 0, Line 11 Could not create constraint. See previous errors.
Because, the first ALTER statement is not getting executed.
Recently I created a DDL Server-scope trigger using the following:
create trigger stop_alter_database on all server for ALTER_DATABASE as rollback; print 'database change stopped by stop_alter_database'; go
Then I ran the following script:
alter database [test] modify file (name=test', maxsize=2028mb);
The result was:
Msg 3609, Level 16, State 2, Line 1
The transaction ended in the trigger. The batch has been aborted.
database change stopped by stop_alter_database
The problem is that when I checked the max size of the data file it had changed. So, the statement was never rolled back. Is there something I'm missing because I can't find any documentation or articles that state the inability to rollback alter database statements. Whats going on?
Here is the alter statement that I am trying to use to create a relationship between 2 tables. This does not seem to work on mobile. What am I doing wrong?
ALTER TABLE [SubCategory] CONSTRAINT [FK_SubCategory_Category] FOREIGN KEY([CategoryID]) REFERENCES [Category] ([CategoryID]) ON UPDATE CASCADE ON DELETE CASCADE
I am trying to add columns to several tables in a singular database. I want to check to see if the column exists in a given table first before executing the alter table command so that I can skip that command if the column already exists, and avoid aborting my script prematurely. I can't seem to find a way to check for the column's existance. Any suggestions?
I've some huge table (over 100GB each), these table contain column of NTEXT, IMAGE. Application team needs to change these data types to VARBINARY(MAX), I've tested the modification in our lab and I noticed that the operation has been almost immediate so, I think that DB Engnine has not converted the existing data in the column but it has simply changed the definition of the column.
Or maybe NTEXT and IMAGE can be transparently converted into VARBINARY(MAX)?
Anyway, I want to be sure that the modified table is "coherent" I don't want that at a given point SQL Server tells me that some data is not readable.
I'm launching the aforementioned statement from one MASTER session windows and I get this message, I am stuck, I though ROLLBACK INMEDIATE go throught any already session open.
Msg 5064, Level 16, State 1, Line 1 Changes to the state or options of database 'GFSYSTEM' cannot be made at this time. The database is in single-user mode, and a user is currently connected to it. Msg 5069, Level 16, State 1, Line 1 ALTER DATABASE statement failed.
Hi people,I?m trying to alter a integer field to a decimal(12,4) field in MSACCESS 2K.Example:table : item_nota_fiscal_forn_setor_publicofield : qtd_mercadoria integer NOT NULLALTER TABLE item_nota_fiscal_forn_setor_publicoALTER COLUMN qtd_mercadoria decimal(12,4) NOT NULLBut, It doesn't work. A sintax error rises.I need to change that field in a Visual Basic aplication, dinamically.How can I do it? How can I create a decimal(12,4) field via script in MSACCESS?Thanks,Euler Almeida--Message posted via http://www.sqlmonster.com
I don't understand why I am having this error. It does create the database on AddSubscription() method but it is failing opening the database on Synchronise(). I have also tried uninstalling and then reinstalling all the SQL Mobile components in the following order.
suggested that this problem could be circumvented by getting the replication object early and then continuously using the same object for subsequent replications.
I did this and it works a lot better now but ever so often I get another error which is
Native Error 28559 SQL Mobile encountered problems when opening the database
My only option at this point is to stop and start the application which cures the problem.
I am developping a non-managed C++ application for PocketPC using a SQL Server mobile database.
The application is compiled for PocketPC 2003 and uses SQL Server Mobile v2. I use Visual Studio 2005. But I need to compile the application for Windows Mobile 5.0 devices. So I installed the WM5 SDK and had the WM5 into my project configuration.
The "ssceoledb.h" which I include incluses the "transact.h" file. But my problem is that this file is only provided with the PocketPC 2003 SDK and not in the WM5 SDK. So I cannot use the WM5 configuration project with SQL Server. I also tried with the last SQL Server Mobile 2005 (ie v3.0) and the "ssceoledb30.h" also includes "transact.h".
Did I miss something to install ? Do you know how I can resolve the problem ?
Using MS VS 2005 (incl SQL Server Mobile) MS Pocket PC 2005 SDK
I am working on a project that builds for Pocket PC on both Mobile 2003 and Mobile 5. The project uses/will use SQL Server Mobile to store local data.
Project created from new with support for both platforms. I include required header files ssceerr30.h and ssceoledb30.h.
Project builds fine in WM2003 configuration, release and debug.
When I build for WM5 the compiler cannot find the header file transact.h. This is included from within ssceoledb30.h. Same as under WM2003.
In WM2003 configuration if I highlight the ssceoledb30.h include in Visual Studio and open the header, it takes me to <Visual Studio dir>SmartDevicesSDKSQL ServerMobilev3.0. I then locate the include for transact.h and do the same, which takes me <Visual Studio dir>SDKPocketPC2003include. The file exists.
If I repeat the above 'browsing' under the WM5 configuration, ssceoledb30.h takes me to a different copy in the WM5 SDK directory. There is no diff between the file here and the other copy used by WM2003. If I attempt to open transact.h - file does not exist.
Fix (which I'm not too sure about, i.e. is it OK?) - If I copy transact.h to the WM5 SDK directory, the project builds.
Why has transact.h disappeared from WM5 SDK? I can find no ref's to this problem anywhere. Is my installation of the WM5 SDK corrupt? What else could I be missing? Is there a sample for SQL Server mobile (like the NorthwindOLEDB sample) that comes configured to build for WM5?
I receive error 25123 on my PPC (audiovox 6600) in a reproducable way (usually) with .net 2.0 application that is using SQL CE that I wrote:
Open the application Connect to the database Close the applicaton Re-Open the application Connect to the database <-- Error occurs
I will also receive the error if my application isn't the first application launched (or very close to the first to launch).
I don't believe it's a memory issue as according to the memory manager I have plenty of memory:
At boot up only start screen items loaded: 18.46 Used 49.89 Free Launch Resco File Explorer to click EXE: 19.18 Used 49.18 Free Launch my application (no DB connection): 23.64 Used 44.71 Free Connect to the DB and do select count(*) from a table with 0 rows: 26.27 Used 42.08 Free Close the application (this.Close() on the form: 19.38 Used 48.97 Free Relaunch App and connect to DB receive error: around 38 Used around 30 free
I was unable to reproduce the issue right now while typing this message, the last sets of numbers are from memory, and include other applications that are currently running.
The only way I have to get SQL CE to load again is to soft reset the PPC. If the application is able to connect to SQL CE at least once it is fine up till I close it and re-open the application. So it either connects and runs great, or it can't connect at all.
Any help in resolving this issue would be greatly appreciated. Wayne
Hi folks, I'm new to Windows Mobile progamming, and new to this forum. Apologies in advance if I'm asking a boneheaded question, but I've done searches and can't find anything directly applicable to my problem.
I'm currently walking through the published MS tutorial in setting up an SQL Server 2005 Mobile application that subscribes to a publication on SQL Server 2005 to exchange information.
I've gotten almost all the way through... successfully set up the server components, creating the publication, etc. On the mobile side, I've been able run the cab files to install the SQL Mobile components and to create the project, add the reference to the dll, and instantiate an engine object. It compiles.
The step in the tutorial after that, though, where you specify the data source from the "data" menu, I've got a problem. When I try to use the "new connection" dialog from choosing the data connection, "MS SQL Server Mobile Edition" doesn't show up as a choice. I've tried choosing any of the other combinations, and in teh subsequent "Connection properties" section my database, SQLMobile (as in their sample) is available, but I get an error when I choose it and click OK. Clicking on "Test Connection" gives me a connection successful message.
My guess is that something about the Mobile server side components is not installed correctly on my development machine, but honestly I have no idea how to begin to fix it. Has anyone seen this problem before and know how to resolve it?
Your time and any knowledge sharing is greatly appreciated. Thank you, -Dana
This is a great tutorial and it's a shame one of the more important steps was missed. In the €œCreate the snapshot user€? section you you find the steps to create the snapshot_agent account. Then in the €œCreate the snapshot folder€? section you find the share and folder permissions. However, at no point do the instructions advise you about adding the snapshot_agent to the SQL Server Logins. The result is that agent cannot perform the initial snapshot but you won't find this out until 50 steps later after Step 10 in the section €œCreate a new subscription".
To get back on track, openthe Object Explorer's Security section and add the snapshot_agent to your logins. Then using the "User Mappings", set an appropriate level for the SQLMobile database role. Once completed you then need to run the agent.
Right-click the SQLMobile publication you created and select "View Snapshot Agent status". From that dialog you can select "Start" to run the agent. When it completes, you can return to the tutorial section "Create a new subscription" and continue with the tutorial.
I am studying the tutorial in SQL Server 2005 Mobile Edition Books Online, and the topic is Creating a Mobile Application with SQL Server Mobile. I have got a problem when creating a new subscription after created a new SQL Server Mobile database. And the problem is shown below:
New Subscription Wizard
- Beginning Synchronization (Success)
- Synchronizing Data (100%) (Error) Messages * Failure to connect to SQL Server with provided connection information. SQL Server does not exist, access is denied because the IIS user is not a valid user on the SQL Server, or the password is incorrect. HRESULT 0x80004005 (29061)
* 無法完æˆ?作æ¥ã€‚
- Finalizing Synchronization (Stopped)
- Saving Subscription Properties (Stopped)
Before I have met this problem, I have finished all the task. And I can browse the localhost web site by using anonymous account even I use internet explorer or browse the directly in IIS.
I would like to add an Identity to an existing column in a table using astored procedure then add records to the table and then remove the identityafter the records have been added or something similar.here is a rough idea of what the stored procedure should do. (I do not knowthe syntax to accomplish this can anyone help or explain this?Thanks much,CBLCREATE proc dbo.pts_ImportJobsas/* add identity to [BarCode Part#] */alter table dbo.ItemTestalter column [BarCode Part#] [int] IDENTITY(1, 1) NOT NULL/* add records from text file here *//* remove identity from BarCode Part#] */alter table dbo.ItemTestalter column [BarCode Part#] [int] NOT NULLreturnGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGOhere is the original tableCREATE TABLE [ItemTest] ([BarCode Part#] [int] NOT NULL ,[File Number] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_File Number] DEFAULT (''),[Item Number] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Item Number] DEFAULT (''),[Description] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Description] DEFAULT (''),[Room Number] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Room Number] DEFAULT (''),[Quantity] [int] NULL CONSTRAINT [DF_ItemTest_Quantity] DEFAULT (0),[Label Printed Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Label Printed Cnt]DEFAULT (0),[Rework] [bit] NULL CONSTRAINT [DF_ItemTest_Rework] DEFAULT (0),[Rework Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Rework Cnt] DEFAULT (0),[Assembly Scan Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Assembly Scan Cnt]DEFAULT (0),[BarCode Crate#] [int] NULL CONSTRAINT [DF_ItemTest_BarCode Crate#] DEFAULT(0),[Assembly Group#] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Assembly Group#] DEFAULT (''),[Assembly Name] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Assembly Name] DEFAULT (''),[Import Date] [datetime] NULL CONSTRAINT [DF_ItemTest_Import Date] DEFAULT(getdate()),CONSTRAINT [IX_ItemTest] UNIQUE NONCLUSTERED([BarCode Part#]) ON [PRIMARY]) ON [PRIMARY]GO
I am using sql server ce.I am changing my tables sometimes.how to use 'alter table alter column...'.for example:I have table 'customers', I delete column 'name' and add column 'age'.Now I drop Table 'customers' and create again.but I read something about 'alter table alter column...'.I use thi command but not work.I thing syntax not true,that I use..plaese help me?
Hi guys, If I have a temporary table called #CTE With the columns [Account] [Name] [RowID Table Level] [RowID Data Level] and I need to change the column type for the columns: [RowID Table Level] [RowID Data Level] to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time. What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance, Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE ALTER COLUMN [RowID Table Level] INT IDENTITY(1,1), [RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE MODIFY [RowID Table Level] INT IDENTITY(1,1), [RowID Data Level] INT;
