Can't Write To Folders From Network After Upgrading
Sep 15, 2015
I upgraded a workstation to Win 10 Pro. The system, System X, has two admin users, A and B. A is logged on to System X. Volume C is shared from the root on System X, and all admins on the system have permissions to Share C with full control. B is logged on to another system, System Y (Win 8.1). B can access (read) almost all folders on System X from System Y, but cannot write to the folders as he did in the past. I included a screenshot of the sharing options, which are the same for all networks, though Network Discovery is off.
I have two 2008 Mac Pro computers running a bootcamp setup (OSX El Capitan/Windows) and have a 50 Mbps cable connection with Linksys WRT 1900AC wireless router. The wireless throughput on both machines worked flawlessly in Windows 7 but after upgrading both to Windows 10 the throughput dropped from 50 Mbps down to apprx 1.5 Mbps. Both computers use a Broadcom 5200 series 80211n chipset which are running the Microsoft signed version 5.100.245.200 driver. The wired network runs at full speed, and in OSX both wired and wireless connections run at full speed. I've seen a number of others report the same issue, but have never seen a fix that seems to work. I've tried updating the driver through Windows but get a OS message stating that the best driver is already installed. At the moment I have Ethernet cables strung across the living room floor, and would like to get back to wireless.
I upgraded my Surface Pro to Windows 10 and after I did wifi stopped working. Went to Control Panel to check the adapters and none were listed. Checked device manager and saw that the Marvell adpater was working properly. So I tried a usb wifi adpater I have and had the same problem. Had to roll back to 8.1
Trying to set up a network for the first time. My intention was to share public folders but when I right click on my user folders (e.g. PCUsersDaveDocuments they are shown as "Shared" and clicking on "Stop sharing" doesn't seem to do anything. Am I missing something.
I have been working with windows 10 X64 PRO for a little bit now. I can still not figure out why my scripts (.vbs) or .exe that I push to or use on my domain machines will not edit or create keys in the registry. The only way i can do it is to full kill UAC then reboot then make changes then turn it back on then reboot again. Listed below our the UAC settings we have set for our select few windows 10 machines. We have UAC fully off in windows 7, but it is needed in windows 10 to have apps run.
What I need to do so i can make registry change on the fly. This going to be a big deal breaker for us to move to Windows 10 if i can not change values.
I have a Freenas Server (based on FreeBSD Unix) connected to my network. I can't get it to show up in file explorer untill I type "//000.000.000.000" (it's IP address). When I try to drag a file to the window CIF shares (Permissions in Unix are Allow Guest Access and Recursively set sane default windows permissions on share) I get the error "You Need Permission to Perform this Action". Both of these features worked on Win 7 Pro before I did an upgrade to Win 10 Pro. I also did a fresh install of Win 10 Pro and it made no difference so I restored a Macrium image of the Win10 Pro Upgrade.
( do you want to allow this app to make changes to your pc ( yes ) ( no )). And we all know the pros and cons of disabling the UAC. Wouldn't it be good if the Yes Box was automatically Clicked for you. All we need is some type of Batch File that would specifically watch for that Message and Answer it for you. Or maybe hidden deep within the registry it may be possible Tick the right Box to do it for us. Looking for some Positive Answers.???
My standard Documents located in C:users...documents is no longer a writable folder following upgrade to Windows 10. Affects Visual Studio, Outlook and some other software. eg for Visual Studio 2013: CurrentSettings.vssettings cannot be written. I own the folder of course and attempts to remove the "Read Only" flag appear to work and then immediately fail when I attempt a write operation to a file in one of the folders. I am administrator but this doesn't useful. Also logged on as a local user instead of Windows Live account, but same results.
As described above, I have games with varying degrees of the problem. Some cannot save settings, still some other cannot save game progression, the worst has it both. I was able to do various workarounds that let me partially solve the problem.
However, I hit a block with my newly installed Metro Last Light Redux, it doesn't write any saves anywhere. I Googled my problem and no solution fit me, I tried writing an "attrib" modification on "My Documents" using an elevated command prompt to rid the "Read-Only" attribute but that still didn't work. I tried taking ownership of the folders in question but still nothing.
I have only one active account on Windows 10, and it xy -> account type is administrator. My UAC settings are set to never notify. Now every program that i run is not run as admin (as was the case on windows 7) but rather as normal user account. Is there a way to change that globally?
Some problems that i have because of that: Torrent program can't write on disc (first time i see this), all games can't update and write to disc, they run fine tho. I usually let BSPlayer to download subtitles and write them in movie folder that doesn't work as well. If i right click -> run as admin program s work fine but it's a hassle i want to avoid.
I recently upgraded to windows ten but ever since I did my computer keeps telling me I do not have the correct permissions to read/write files. I have tried to change the settings to allow the one and only account the permissions. It works temporarily but after a few days it goes back to not allowing me again. I also tried activating the built in administrator account to save files but of course a built in administrator account cannot access the same things as the original account can.
DVD-RW are re-writable correct? I tired to format it and it said i couldn't because of write protection is there any way I can remove the write protection on it?
Today i turned my computer on and for some reason I cant restart it( the shutdown/restart on the right bottom corner is locked) and my password is locked(cant write it).
I disabled UAC & i'm using the only account on this system, which is admin. Yet i'm not allowed to write to C roots and being ask to write in many other places.. How do i disable that & i'm having admin rights ALL THE TIME while using my admin account..?Ok so what i mostly need is the ability (permanently) to write to C: disk root. How do i do that?
Today i turned my computer on and for some reason i cant restart it( the shutdown/restart on the right bottom corner is locked) and my password is locked(cant write it).
Normal PC that was running win 7 Pro. Had an HP 1260 Lightscribe drive. Burned CDs, DVDs AND Lightscribe labels... Worked perfectly. Worked for years. I know how to use it.
Upgraded from Win 7 to Win 10 Pro. Concurrently, my hp 1260 died and I bought a TSST L632M USB Lightscribe drive. I plug is into a USB port AND IT WORKS. It burns CDs. It burns DVDs. It does NOT burn Lightscribe labels. Drive is clearly marked "Lightscribe". The Internet SAYS it's a Lightscribe drive.
The Lightscribe service is running. The Lightscribe Control Panel SAYS IT'S THERE. The DISK is a TDK and clearly marked "Lightscribe". As near as I can tell, it should work.
The Lightscribe template labeler goes through the WHOLE process of "writing" with the animation showing the text being written. BUT, the drive LED never flashes, and nothing gets written.
I tried it on a SECOND machine - one running Win 10 HOME. Same result. Unfortunately, I've upgraded all four PCs to either Win 10 Pro or Win 10 Home, so I no longer have a Win 7 PC to try the drive on.
WHY this thing won't do what it's clearly marked to do? Driver of some sort?
Everytime I wake up my desktop from sleep, I get the BSOD with the message - Attempted Write To Readonly Memory, and the system restarts. I have this problem for a few months now, since I was on Windows 7. I thought the problem might go away after upgrading to Windows 10. But even after the upgrade, the issue still remains. It is pretty annoying as I can't leave my system idle for a few minutes. I'm attaching recent dumps and msinfo file ....
My computer delivers a BSOD and reboots when I get to about 95% through a Windows backup. The error message points to VHDMP.SYS. It's actually failed intermittently for some weeks and then backed-up okay but today some 10 attempts have all failed. I've tried checks to the limit of my technical capabilities (checked disk and memory).
I have upgraded to window 10 about a week ago and I have Samsung DVD Write SH224DB/RSMS DVD supawriter, in my pc desk top pc and since upgrading to windows 10 I can't use it, it do's not even show in the devise manager or any online hardware dives programs.I do know it has power to the device but will not read and disc or film disc.
I have two computers that I'm trying to get to communicate with each other so I can move files back and forth between them. My plan is to make one of them the home's backup and main storage system. the problem is that I can only seem to get one of them to actually communicate equally. Computer 1 is a factory Lenovo Intel i3 computer. Computer 2 is a home made AMD that I just built a few weeks ago.
Both are running Win 10 Pro. Both are physically attached to the router. Heck, they're physically stacked on each other on my desk....
Using File Explorer, on the left side Panel under Network, it shows both computers: AMD and Lenovo.
Computer 1(factory) is able to the files on Computer 2 easily by going over through File Explorer. But, if I click on one of the files, I get the message that I DO NOT HAVE PERMISSION. If I try to cut/Paste files from Computer 1 to computer 2, I get the same message.
Computer 2. I am also able to see the computer listed under Network in the left panel. When I click on Computer 1 to access it, I get a Network Error Windows cannot access Lenovo (Computer1) Error code 0x80070035
I've tried the Diagnose option and it doesn't work.
If I click on a Drive under Network on the very computer, I can see the drives, I can see the directory list. If I click on a file, I get the error. Example on the left side panel on my AMD computer I select:
>AMD >C: >PerfLogs
It's at this point that I get the error: Windows cannot access amdcPerfLogs as an example
I've tried running through Homegroup setup and Googled for days on setting up a network with Windows 10 and can't seem to figure out what I'm not doing here to make these computers talk and communicate with each other. I eventually, want to get all my computers to talk to the AMD so I can use it for a main storage/backup for the home network.
On Windows 7 start menu you could have a folder such as EA Games and then sub folders within. For example a folder for tiger woods golf, a folder for say Fifa and so on. It seems on Windows 10 you can only have one folder level. I have tried creating sub folders but all the shortcuts within the sub folders all appear under the one top/master folder when actually viewing the start menu. Am I correct in this observation/restriction?
Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
