Canon BJC-3000 Won't Print - Older Printers Are No Longer Supported On New OS

Nov 24, 2015

Actually none of our old printers will print anymore...have tried with W10, W7 and WXP.  Currently trying to get a Canon BJC-3000 to print off a W10(just upgraded from W7) - nothing.  I'm told this may be due to the older printers are no longer supported on new OS's.  Is that true or can I do something about it?

View 3 Replies


Similar Messages:


Canon MG4200 Will Not Print?

Aug 16, 2015

when trying to print get message to say off line even though it is connected to wifi router.

View 3 Replies

Canon EOS 700D Camera No Longer Connects To PC Via USB

Jan 6, 2016

I have a Canon EOS 700D which until today I have had no problems connecting to my laptop via USB. However now I just get error 10 "This device cannot start". It connects fine using the same cable on two other laptops running windows 10. Since the last time I connected the camera which was about 10 days ago there have been two Windows updates KB3132372 and 3133431 installed.

View -1 Replies

Drivers/Hardware :: Canon MP250 Printer No Longer Works?

Jan 4, 2016

When the print spooler is turned on I get a message that says the printer queue is full. (The printer queue is empty.)

If I try the printer without the printer spool on i.e. print directly to the printer, I get a message that says "Unable to create a print job."

This printer was working with Win 10 until recently. The scan function works as it should. So the computer does see and interacts with the printer through the usb port.

Something must have changed in the latest Windows 10 release to gum up the works.

View 1 Replies

Drivers :: Printer Will No Longer Print After Downloaded And Install

Sep 5, 2015

my hp photosmart 5520 e-All-in-one printer will no longer print after I downloaded and install windows 10. What should do. 

View 1 Replies

Cannot Delete Unused Printers From Devices And Printers

Nov 28, 2015

The printers do not show in "device manager" but they appear in Devices & Printers. If I select it and click on "remove" it temp goes away but reappears again later. 

View 5 Replies

Screenshot Not Working - Inspiron 3000 Series

Sep 11, 2015

I searched how to screenshot, and found the "alt + prntscr" method. I managed to take one screenshot. Every time I try now nothing happens. I have also tried just pressing prntscr.

View 1 Replies

Networking :: Connecting To Older Wireless APs

Oct 29, 2015

I was unable to connect to an older (backup) AP in Win10, but Win7 and my phone, tablet etc could connect no problem - these were connecting using WPA-TKIP, but MS now only allows WPA2-AES

So MS have removed the less secure WPA-TKIP protocol from W10 (this apparently started in W8), but they have left the even less secure WEP protocol in place!!!

I have now connected using WEP - on my router you can use a passphrase to create the hex pairs for the key, but you need to enter the actual hex characters as the key (eg 13 hex digit pairs = 26 characters to enter)

Looking at the wlan profile from the command line interface shows what the settings are...

netsh wlan>show profile plusnet2
Profile PlusNet2 on interface Wireless Network Connection 4:
====================================
Applied: All User Profile
Profile information
-------------------
Version : 1
Type : Wireless LAN
Name : PlusNet2
Control options :
Connection mode : Connect automatically

[Code]......

View 6 Replies

Backup And Restore To Older Windows

Oct 16, 2015

I found out that since I replaced my motherboard, due to OEM, my win 10 license is no longer genuine.I contacted microsoft, and the guy told me to revert back to my old version of windows, which was 8.1. The problem, though, is that when I go to "Backup" under settings, it doesn't tell me that I can revert back to 8.1, but rather windows 7. The guy from Microsoft told me that he wouldn't revert himself, since he doesn't know what would happen.

I'm getting quite tired of not having the genuine windows 10, but I fear going back to 7, since I didn't own a genuine copy of that one too.So, should I try and revert, or is there another way for me to get back my genuine Win10 copy?

View 1 Replies

Drivers/Hardware :: Print Spooler Chokes When Attempting To Print Certain PDF Files

Jan 10, 2016

The print spooler chokes on both of my Windows 10 machines when trying to deal with certain pdf files. For instance when I tried to print [URL] ... via my browser (Chrome), it printed the first 6 pages, but the printer showed an error when it came to the seventh page. When I then tried to create another job just to print the seventh page, it just hung around in the print spool and nothing happened at the printer.

I tried this several times on two machines. It was also impossible either to cancel the job in the print queue manager or to stop the spooler in the services manager in order to manually clear the print queue, which meant that the only way I could clear the queue was to restart the machine. I got the same behaviour whether I was printing to my physical printer or to the MS pdf printer. I also got the same behaviour when I tried to print from a different browser (Edge). This is not the first time I have had a problem with an unprintable file like this in Windows 10.

View 5 Replies

Why Won't Calendar App Show Any Events Older Than 3 Or 4 Weeks

Nov 20, 2015

My Windows 10 Calendar app won't show any events older that 3 or 4 weeks. It is synced with Outlook and a Gmail account. Those events do show on my phone and if I go to the individual websites.

View 4 Replies

Gaming :: Play Any Older Game From Origin Launcher

Oct 10, 2015

I guess its best to start with the fact i have a triple monitor set up all running off a nvidia 970 video card. 2 24 inch monites left/right and a 32 in monitor in the center. When ever i try to play battlefield 1942, the older sim city, red alert 2/yuri's revenge etc since upgrading to windows 10. the game seems like its playing in fullscreen. But as soon as i go to the left or right edge of the screen my curser comes out of game, and i select what ever the mouse is over dropping me from game. i just played starwars battle front beta for the last 3 hours so i know its not an issue with game launched from origin, and probably related to win10 and older games.

View 1 Replies

Apps :: Cortana Won't Work On New Computer - Works Fine On Older One

Dec 25, 2015

A few days ago, I upgraded my Windows 7 laptop to Windows 10 and took Cortana for a bit of a test drive. It wasn't great but it might be useful on some occasions.

Today, I bought a brand new laptop which installed Windows 10 when I powered it on. After the installation, I was checking things out a bit and wanted to verify that Cortana was working on the new laptop. Cortana promptly told me it was not available in this region!

This makes no sense to me. I was in Southern Ontario, Canada, both times (although in different cities within the area). I can't believe that Cortana would work in London Ontario but NOT in Kitchener Ontario, which is only an hour east of London.

how I can coax Cortana to work on the new laptop?

View 1 Replies

Can't Print 6x4 Photos Using Windows Print Function

Mar 16, 2016

there doesn't seem to be a way to print a standard 6x4 photo using the Windows print function for pictures. how to do this as it was possible on earlier versions of Windows.

View 3 Replies

Canon Printer Listed Under Disk Drives?

Aug 26, 2015

In my device manager my canon printer is listed under Disk drives, USB connection?? Its also listed correctly under printers too. Should I remove it from being listed under disk drives?? or leave it alone?

View 2 Replies

Drivers/Hardware :: Canon LBP6000 / 6018 Is Not Recognized

Feb 23, 2016

When I plug in the cable for the Canon LBP6000/6018 printer in my new Lenovo 100 I get a message that it isn't recognized. I've used two different cables with the same result. My printer does not show up on the Devises screen. The printer worked perfectly on my old computer with Windows 7. I even converted my old computer to 10 and got the same error message, so the issue is with 10. How do I get my printer to work on 10? It's only a year old, so I won't replace it.

View 9 Replies

Unable To Open Canon Printer Quick Menu

Oct 6, 2015

Unable to open Canon Printer Quick Menu since installing Windows 10. The application file is installed on the laptop but Windows cannot see it. 

View 2 Replies

Loaded Canon MP480 Printer Won't Work - How To Get It Working

Sep 17, 2015

In setting it says driver is unavailable.

View 1 Replies

Drivers/Hardware :: Canon MP240 Scanner No Driver (Unsupported)

Feb 1, 2016

My canon printer isn't supported by Windows 10. Troubleshooting it just tells me there is no drivers. It prints fine, but i cannot use the scanner. Is there any way i can get the scanner to work, more specifically in gIMP?

View 4 Replies

Installation :: OS Won't Load - CPU Not Supported

Aug 22, 2015

I have an older home build computer. Main board is an ACER AST690, CPU Pentium D 2 core 3.4 GHz, OS Win 7 Pro SP1 When I first tried to load Win 10, I was running an Pentium 4 672 HT-Vt, 3.8 GHz. I got a message that my CPU was not supported. Coreinfo indicated prefetchw was missing. I found the Pentium D 2 Core that has prefetchw. Win 10 still won't load from the start menu icon. I downloaded the isoimage of Win 10. It will load but as home addition which I don't want. My last check of compatibility of Win 10 was on 8-10-2015. Do I need to wait until after 9-10 for Microsoft to rerun the compatibility test? I really don't want Home Addition of Win 10, I want to upgrade from Win 7. Will I be able to load Win 10 after 9-10?

View 9 Replies

Multiprocessor Configuration Not Supported

Jan 19, 2016

I am trying to upgrade to windows 10 and get the following error

Multiprocessor_Configuration_NotSupported

Having tried a few times the other error I get is C1900101-20017 ...

View 1 Replies

Can't Upgrade Because BIOS Isn't Supported

Jul 31, 2015

I currently own a Dell Inspiron N5110 laptop with Windows 7 installed, but just received the last part to build my own desktop today! I'm looking to get Windows 10 on my new PC.I recently received the "Get Windows 10" button in the toolbar on my laptop, but when I click on it, it says I can't upgrade to Windows 10 because "the BIOS isn't supported".

However, I don't really want Windows 10 on my laptop; I'd much rather have it on my new desktop. So, my first question: is there a way that I can download a bootable Windows 10 file to my current laptop, transfer to a flash drive, and use that to install Windows 10 on my new PC right out of the box, all for free?

So my next question is: will buying and downloading the version of Windows 8.1 Pro in the above link work for my situation? That is, is it a full install in the sense that I will be able to make it a bootable file on my flash drive to install on my new PC? I believe I would have to download a Windows 8 ISO file to start.

My last question: is there an easier alternative to getting Windows 10 on my new PC, and if so, what is it? I think I can download Windows 10 here: URL... I'm not quite sure how that process would work either.

View 1 Replies

CPU Isn't Supported Message When Trying To Upgrade

Aug 15, 2015

Got this message "CPU isn't supported" when they tried to upgrade to W10. We tried the Media Creation Tool and it came back with "You can't install Windows 10 because your processor doesn't support CompareExchange128". So where do i send her from here ??

Running W7

View 8 Replies

Networking :: Sharing Printers To XP?

Aug 18, 2015

having some issues sharing local printers from windows 10 to xp.

I've atached the error message which i get. the process works fine utill i reach that point.

The process works without an issue in reverse (eg saring from xp to windows 10 but that doesn't suit my needs.

View 2 Replies

Printing To Homegroup Printers

Aug 31, 2015

I have a home network with 4 Windows 10 and two Windows XP computers. The 4 Windows 10 computers are in a Homegroup and all are set up to share files and printers. I can access documents on all of the computers in the homegroup from every other computer in the homegroup. Two of the computers are logged in with local user accounts. The other two are logged in with Microsoft ID user accounts. One of the Microsoft account computers has an HP inkjet printer and a Brother laser printer attached via USB ports. I can print on those two printers from the host computer and from the two computers logged in with local accounts. I cannot print to those two printers from the other computer logged in with a Microsoft user account. When I try to do so I get a notification that says "access denied, unable to connect". If I change that one computer to a local account, it works just fine immediately, but when I change it back to a Microsoft ID user account the problem recurs. That would seem to preclude driver, homegroup and network problems, but I rule nothing out at this point.

View 6 Replies

Can't Upgrade From Windows 7 - Processor Is Not Supported

Nov 24, 2015

I have upgraded an older Acer extensa 5220 that came with windows vista pre installed and it runs really well but I cant upgrade .a later model Toshiba lap top because the processor is not supported it came with windows 7 pre installed. I thought if it ran windows 7 it could be upgraded ...

View 5 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved