Drivers/Hardware :: PC Turns On - No Signal And Keyboard / Mouse

Sep 13, 2015

So I was in my bios and I changed my CPU mode offset sign from + to -, I saved the settings and exited. When the PC restarted it came on perfectly fine but I am getting no signal on my monitor and my razer keyboard & mouse aren't coming on or lighting up.

My motherboard is a P8Z77-V LX
My CPU is a Intel Core i5 3470 3.20Ghz.
My RAM is G.Skill RipJawz 1866mhz 4 X 4
My GPU: Asus GeForce 660ti DirectCU II OC Edition.

I googled around and it said to take the battery out for 10 seconds and put it back in, I did that and no change, I also took the jumper from 1-2 and put it on 2-3 for 10 seconds then back again, Again no change.

Ive reseated the RAM/GPU and CPU and nothing seems to be working.

The pc turns on fine but nothing seems to be working.

Even my Corsair H80i pump LED changed from white to pink which is the colour I set it. All fans are working too.

Why I changed my cpu offset mode, Before this issue I just had a bluescreen for WHEA_Uncorrectable_Error, I turned my PC back on and I googled around and it said it was something to do with my CPU voltage, and one person suggested to try and change it from + or auto to -, So I restarted my PC and changed the cpu offset mode from + to -, after that it doesnt seem to be working and im not quite sure why.

What I can do to try and solve this issue or should I just order a new motherboard?

View 9 Replies


Similar Messages:


Screen Turns Black Says No Signal

Jan 20, 2016

saw other post about Crashing without BSOD, and i followede some of the steps other people had to no luck. screen turns black, says no signal(one says no VGA and other say no HDMI), sounds cuts off, PC is still on, Lights in mouse and keyboard have to shut down the pc manual no BSOD.

ad the problem for some time now. first time i got them was in the Starcraft 2 legacy of the void, in some of the cutscenes, but only in the cutscenes, and now i have it again in blade and soul. sometimes at the login and sometimes when i enter the game(Cutscene). URL....starcraft was random times some cutscens were ok, some not, What i did was instant esc and watchede the cutscene online if it crashede) every other game i played/tryed i never crashede like this. WoW fallout 4 so on.

specs:
GPU: AMD radeon HD 7950 3GB
CPU:Intel Core i5-3570 @ 3.40GHz
Ram: 8GB ddr3 1333MHz
hard drive(s) 1: Samsung SSD 840 series 250GB
hard drive(s) 2: 500GB (SATA 6Gb/s) 7200RPM
mainboard: ASUS P8B75-M
PSU:XFX PRO XPS-550W-SEW
Windows: 10.

what i have try'ed so far. update all drivers,(also BIOS)removing mouse/keyborad/headset from usb(when the game was in loading scene to the cutscene removeing Ram blocks,MemTest did a Verifier /standard /all in CMD crashed(got minidump file) HW monitor C* on pc, GPU never came over 65, CPU never over 70 no overclocks Checked Voltages seems to be in range,

use WhoCrashed to read the DMP file.
On Wed 20-01-2016 19:42:35 GMT your computer crashed
crash dump file: C:WindowsMinidump12016-4453-01.dmp

[code]...

This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time. URL...

View 1 Replies

Drivers/Hardware :: Mouse And Keyboard Not Working

Jul 30, 2015

After I installed Windows 10 from windows 7 I couldn't use my mouse and keyboard it works when I boot up BIOS Utility but when im on windows 10 it does not work. I tried switching usb ports and that didn't work either.

View 9 Replies

Drivers/Hardware :: Exclamation Point Next To Ps/2 Mouse And Keyboard

Jan 21, 2016

In device manager, when going to the view tab and clicking show hidden devices I have exclamation points next to Standard PS/2 Keyboard and Microsoft PS/2 Mouse. I can uninstall, but after reboot they appear again. My motherboard does not even have PS/2 outlets, only USB.

I have downloaded and installed the latest intel chipset drivers 10.1.2.10. The errors showed up before and after the chipset update.

After running perfmon /report I get errors for both of these.

After I uninstall both of these in device manager and run perfmon /report I do not get the errors, however they reappear after a re-boot.

View 4 Replies

Drivers/Hardware :: Frozen Keyboard And Mouse At Login Screen

Jan 23, 2016

Recently I upgraded from Windows 8.1 to Windows 10 however this caused several issues with my laptop so I reversed the upgrade back to 8.1. My Kaspersky AntiVirus would then not work leaving just a blank logo on my desktop. I tried to uninstall kaspersky using the uninstall programme available on their website but upon restart I can no longer get past the login screen as I can't use my keyboard or mouse to enter my password. I can enter a screen that allows me to select safe mode but again I can't enter my password. I have a Dell restore USB but this will not work. I have tried USB mouse and keyboard but no luck either. I cannot preform a restore at all.

View 1 Replies

Drivers/Hardware :: Mouse Movement / Keyboard Turning On The Computer?

Sep 15, 2015

I edited the BIOS settings to try and enable my keyboard and mouse and wake my computer from sleep, however now I am having the problem that moving the mouse/using keyboard also turns on my computer when it is powered off.

Is there a way to get my computer to wake, by only click or typing any key (not moving mouse), but at the same time, keyboard and mouse not affecting anything while the PC is turned off (only being able to press the power button on the PC tower to turn it on from shutting it down)?

Here is a photo of my BIOS settings currently. When I have "Resume from S3/S4/S5 by USB Device" enabled, the computer turns on (from being shut down) by moving the mouse/clicking/hitting any key on the keyboard. When it is turned off, the mouse or keyboard don't do anything while the computer is off or asleep.

View 9 Replies

Drivers/Hardware :: Stuck At Login Screen Does Not Recognize Mouse Or Keyboard

Aug 3, 2015

I have followed several similar threads and their fixes for this problem with no result. After downloading the Win 10 upgrade, my system then said "loading updates". Then it restarted with a blue login screen saying "Welcome Back!" And a box to enter my password. The cursor is blinking in the box, but neither my mouse or keyboard works.

I have hard booted several times since the ctrl+alt+delete does not work. I am also not able to access safe mode as none of the "F" keys work during boot up.

I have tried the following:

1. Unplugged all USB devices except keyboard.
2. Turning off internet at the router.

I have a Dell desktop, and upgraded from Windows 7, with a Netgear router/modem. The only way I can get the system to move is if I power off at the main switch after booting up which goes into bios and disc diagnostics, but I don't know enough about computers to know what to do there!

View 9 Replies

Drivers/Hardware :: Mouse And Keyboard Stop Working After Long Period Of PC Being Shutdown

Jan 19, 2016

I just recently updated. I then created a boot disk and performed a clean install. I use a Razor Black Widow Ultimate keyboard and a Logitech G9x laser mouse. I can reboot, I can shut down and restart and everything seems to work fine. But, after leaving the pc off all night and start in the morning I have no mouse or keyboard. This has happened Saturday morning, Sunday morning and yet again today. Fortunately, I have Acronis backup of my install, so when this happens I just re-image the hard drive and start searching for solutions again.

I have the latest Logitech mouse drivers and running Razor Synapse for keyboard software.

The latest thing I have done is disable fast boot but have not had it shut down long enough to see if it fixes the issue.

View 4 Replies

MS Keyboard And Mouse Driver Not Working For Left Handed Mouse?

Aug 7, 2015

I use left handed mouse, and swapping left / buttons works OK. I also set the wheel button to be "double click". But the wheel button brings up the context menu instead of double click. If I change to right hand mouse, the wheel button gives double click as expected. how to make the wheel button give double click for left hand mouse?

View 5 Replies

Keyboard Layout Selection - No Mouse Or Keyboard

Dec 21, 2015

Okay, so I take blame for accidentally messing up my Windows 10. My NVIDIA graphics card wasn't working and wasn't letting me install my drivers. Well that aside, now that I installed older Drivers Windows 10 registers something horribly wrong. It wants to do a system repair. Okay, good, fine with me. But then when it gets to the page for me to select a keyboard layout, I have no mouse and my keyboard doesn't work either.

Anytime I press a button on them their backlights turn on, but then turn back off when I don't do anything with them.

I can't afford to get a new OS, I have no DVD Drive so I definitely can't do anything that requires a disk. What do I do? 

View 6 Replies

Drivers/Hardware :: No Signal After Installation

Aug 5, 2015

last night i started the auto upsate to Windows 10 from windows 8 and It restarteded a few Times and everything seemed Good, so i went to sleep and leet the computer run.

So when i Woke up this morning i went to the computer to test Windows 10 now when i tought IT Was installed. But nothing happen so i tried to restart but still No signal. I have tried to restart the bios from cmos battery but still nothing.

View 2 Replies

Drivers/Hardware :: Replaced Wired Keyboard With Bluetooth Keyboard - PC No Longer Sleeps?

Nov 21, 2015

I recently got rid of a cabled keyboard in favor of a smaller bluetooth keyboard (MS Mobile 6000). Everything is great except that now, I have a hard time putting my PC to sleep. In fact, it tends to wake up after 30 seconds or so. I'm pretty sure this is due to the BT keyboard.

View 3 Replies

How To Use Mouse And Keyboard

Aug 4, 2015

I updated my laptop (No touch screen) from win 7 to win 10 ....... my mouse and keyboard is not working

View 1 Replies

Cannot Use Keyboard Or Mouse After Boot

Aug 30, 2015

I have installed windows 10 and it was working great and then I turned on my pc and when it gets to the screen after the blue windows logo where one would normally login my keyboard and mouse will not work. I've tried them on every USB port I have and nothing works.

View 4 Replies

Now Keyboard And Mouse Won't Work

Aug 11, 2015

I have a Dell XPS 17 laptop. Worked great under Windows 7. Tried Windows 10 but was unable to get the wireless LAN driver to work, so I went back to Win 7 via the official "Go Back to Windows 7" option in Windows 10 - now the keyboard and mouse won't respond after start up. They work fine in the bios, but are completely unresponsive on the login screen - even when I boot in safe mode. No USB ports work, so I can't try another keyboard/mouse. Was going to reinstall but I'll lose the existing data. Now I'm going to have to pull the drive and copy over manually, then reinstall. Last thing I was going to try was disabling EVERYTHING in the BIOS just in case there was some kind of weird IRQ conflict, etc.

View 1 Replies

Waking Up Laptop Through USB Mouse / Keyboard?

Aug 28, 2015

Whenever my laptop goes to sleep, the only way to wake it up is through the laptop's keyboard (pressing any key on the keyboard). But when I press the USB keyboard or the USB mouse, it doesn't wake up.I use my laptop mostly as a "desktop": I connect it through an HDMI cable to a larger 24" monitor, and the laptop is lying closed in the corner. It is just annoying to open the laptop and press the keyboard.. not a big deal, but if it's possible to change that it will be good !

View 6 Replies

Installation :: Cannot See Mouse Cursor Or Use Keyboard

Sep 13, 2015

So my computer started running a bit slower then it should be, at the point where my computer to open would take half a min, so i did fresh install. So i left installation overnight, i wake up in the morning and it say "Hi there" installation menu where you choose Country, language, keyboard layout and timezone, but it's totally froze, i can not see mouse cursor or use my keyboard, if my monitor goes to sleep i can't turn it on back. I did read that it's problem with drivers not installed. I've tried restarting pc few times. Is it true that problem is with drivers not installed correctly or at all?

View 1 Replies

Installation :: Keyboard And Mouse Not Recognized

Dec 10, 2015

I recently re-installed Windows 10 on my Asus X205TA notebook using the ISO on a USB stick.It installed without a problem, but when I boot the computer now (first boot after installation), the OS does not recognise the keyboard and the mouse, so I cannot enter the required data to proceed to the next screen..

Seems like the required drivers are missing, and I am thinking a re-install may be necessary, but how to get the keyboard and mouse drivers included (inserted?) in the installation process?

View 1 Replies

Mouse And Keyboard Don't Work - No Cursor

Jan 12, 2016

turned my computer on yesterday and it loaded up fine, apart from there was no cursor and my keyboard wouldn't work. I have a R.A.T. 5 mouse and a Coolermaster QuickFire keyboard. I know that they're on and working because their LED's are on. I decided to plug in my old ps2 keyboard and restart my PC to enter BIOS. I checked and it recognises that the keyboard and the mouse are connected into the USB hub and says they're working. Another thing, even my ps2 keyboard doesn't work when my computer gets past the start screen!

View 1 Replies

Mouse And Keyboard No Longer Work

Dec 5, 2015

I just went from Windows 7 to 10 and now my USB keyboard and mouse are unresponsive.

View 5 Replies

USB Mouse And Keyboard Only Working In BIOS

Nov 2, 2015

My PC was working fine until today. Now when I boot up the lights on my razor keyboard illuminate but when it gets past the bios the lights turn off.

When the login screen for w10 comes up I can't login because both the keyboard and mouse are not responding.

They work fine in the bios. I am using a custom built PC (a88x-gamer MOBO) and a corsair m65 mouse with a razer black window 2015 keyboard and running Windows 10.

View 1 Replies

Keyboard And Mouse Unable To Wake PC Up From Sleep

Oct 25, 2015

Yesterday I downloaded and had a fresh installation of windows 10 (means I have no backup of my previous windows 7). Now since installation, whenever my PC goes to sleep I fail to wake it up by pressing any key on the keyboard or touchpad.

I've tried to find the power management in keyboard settings from the device manager but I failed to find any option there.

Device: HP Probook 450 G2

Screenshot of Keyboard Properties:

View 2 Replies

Can't Restore - Mouse And Keyboard Quit Working

Dec 14, 2015

I've had a series of problems with Windows 10. Latest (last couple of weeks) Thunderbird and all browers have been gradually getting worse and worse. I decided to restore the system this morning but I get stopped every time by a screen where I am to select a keyboard to use. This is where both the mouse and keyboard don't work.

View 4 Replies

Performance :: PC Wakes From Hibernation With Mouse And Keyboard

Dec 12, 2015

I have successfully activated hibernate mode (S4), yet whenever the PC is hibernated a shake of the mouse or the press of any key on the keyboard just wakes and turns on the PC. Needless to say I do not want this to happen. Hibernate (S4) works as confirmed by the fact that when it's waken up, the PC goes through the POST phase of the boot before loading W10. In addition a powercfg /a gives the following output

Code:
C:WINDOWSsystem32>powercfg /aThe following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast Startup

Sleep (S3) works too. Although it seems to have the same effects on the hardware (turns off the CPU fan), the waking up it's much quicker, without POST. In addition, here's the log from Windows event viewer:

Code:
Log Name: SystemSource: Microsoft-Windows-Kernel-PowerDate: 12/12/2015 16:40:19Event ID: 42Task Category: (64)Level: InformationKeywords: (4)User: N/AComputer: DESKTOP-9NITH1LDescription:The system is entering sleep.Sleep Reason: Application API

[code]...

In the UEFI BIOS all the ACPI settings are in order, as shown in this photo. Bios is updated to the latest version.

View image: WP 20151201 11 43 34 ProEnabling/Disabling Fast-boot and/or fast start-up changes nothingI tried also a different USB wireless mouse, but no changes. With a PS/2 mouse the PC does not wake up from hibernation.Switching the Logitech Unifying receiver between USB 2 and 3 makes no difference.The same mouse and keyboard do not turn on the PC after a complete shut down.

View 1 Replies

Keyboard And Mouse Stopped Working After PC Reset

Mar 8, 2016

My mouse and keyboard don't work. I just want to play counter strike...

View 1 Replies

Got To Password Screen And Mouse And Keyboard Won't Work

Aug 31, 2015

I recently tried windows 10... didnt like it. Did the recall back to windows 7 option. Let it do its thing. Came back and my computer was trying to rapair itself... said could not reboot windows is checking for a solution.. I let it go.. it said no solution found. And just turned off..So I restarted spammed f8. Tried to start in safemode.

Got to password screen and mouse and keyboard won't work...So I restart, spam f8 again. I select repair windows this time, cancel the repair process then clicm.advanced options. Try to look at restore points... and it says none exist... that is bs. I did restore points twice a week. when. I try to start normally it loads her goes to a blue screen with tons of writing and letters and errorrs but no time to read any...

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved