Installation :: Stuck In UEFI After Reset To Default

Feb 10, 2016

After resetting UEFI to default values, I can't start WIndows because boot goes to UEFI.

I wanted to make a clean install of W10 and for that I had to make some changes in UEFI because it wouldn't allow me otherwise. But after the installation I see that I have some problems with the sleep and fast boot, not working well. So I went to UEFI and reset it to default, saved and exit. On boot, it goes to UEFI once and again. Windows doesn't load.

So I have to do the same changes that I had to do for installing W10. Disable fast boot, etc. And then yes, I get to Windows, but keep having the same sleep and boot problems. Both work really bad in different ways.

I also did other changes, by the way. I couldn't install W10 because it said that my disk was GPT partition style, so I had to follow some instructions to change that, which wiped my disk and partitions completely and maybe I missed some step...

View 9 Replies


Similar Messages:


Installation :: How To Reset IE As Default Browser Instead Of Edge

May 24, 2015

I can't use EDGE as my default browser as I have a few media servers and as has been pointed out that as EDGE is a universal app addresses like 127.0.0.1:8000 (i.e localhost type stuff) are no longer addressable. I need these types of addresses to use the web interface control settings on various of my media servers so I want to reset IE as the default app.

View 4 Replies

Installation :: Stuck At Loop During Reset?

Aug 26, 2015

I recently upgraded my Windows 7 PC to Windows 10 using Windows Update. The whole process was smooth. I never really ran into any problem. Because the PC is so relatively old, I decided to delete all files and reinstall windows 10 using the windows 10 feature 'Reset This PC' to start fresh and theoretically faster. During the reset when Windows is installing my drivers, I noticed that the screen is plain black - no mouse pointer and the amount of reset finished(in percentage) is not also shown. The screen is just plain black. I am pretty sure that both the monitor and CPU is on. I've tried waiting for atleast an hour. I turned my pc's monitor on and off - nothing happened. So I have to resort to hard reset/reboot coz I cannot really see anything on my screen.

When I turned the power of the CPU back, it gave me the error 'The computer restarted unexpectedly or encountered an unexpected error. To install Windows, click ok to restart the computer and restart the installation'. I pressed OK but after restarting, it gave me the same error over and over again. I tried the solution in this website ( during installation of windows | HERESJAKEN), and it got rid of the error. However, I am stuck yet again in a loop that continues to just restart my PC when they reach the screen that tells you how much of the reset is finished, in my case, im stuck at 64% of the reset. That screen is shown for like merely 2 seconds, then the PC will just restart again, then show the "Reset progress screen" again for 2 seconds then PC will just restart again, over and over. I think the only solution is to start the reset of the PC again, but I dont know how.

View 1 Replies

Installation :: Update Stuck In Reset Loop?

Aug 1, 2015

My installation is stuck in a reset loop. The Win 10 Ready to Install came up, so I clicked Start and it rebooted, back to the login screen, and then Windows Update came up saying it needed to Restart Now. After a couple of minutes the Win 10 Ready screen comes up again. I've rebooted about 20 times and get to the same point every time.

View 2 Replies

Installation :: Factory Reset Tablet Stuck?

Sep 9, 2015

So I updated my tablet from 8.1-10. There were some issues so i reinstalled some drivers and the issues continued so i did a factory reset. The reset stopped halfway and wont continue. The screen is mostly blank unless i fiddle with some things and a screen comes up asking if I want to continue to update, reset factory settings, trouble shoot, use usb or cd or continue the reset. I have tried the reset a few times but it has not worked. Amazon.co.jp: マウスコンピューター 8.9型Win8.1タブレット・2in1 PC Office付 (Win8.1/AtomZ3735F/2GB/32GBeMMC/Office HB) WN891: パソコン・周辺機器 This is the tablet here. Unfortunately everything is also all in Japanese, which i understand somewhat but am kind of winging it.

View 4 Replies

Installation :: Reset PC Stuck After Upgrade / Won't Activate

Mar 2, 2016

Last night I finally decided to backup all of my files on my Windows 7 desktop machine and wanted to do a clean install of Windows 10 (I had been wanting to reformat for a while, this seemed like a good time to do it). I noticed after starting the free activation of Windows 10 (through Windows Update) that it would only update to Windows 10, so I let it proceed.Once 10 finished and booted up, everything was great. At this point, I went into settings and chose to Reset this PC, and made sure to select only to remove files - not fully clean the drive.

After being stuck at only 2% for 4 hours, I decided to give up on the reset completing. I turned off my desktop, and then downloaded the Windows program that creates the installation on a USB drive from my laptop. Once completed I inserted the USB drive into my desktop and installed Windows 10 as a clean install without any issues.After all of this, I cannot activate my Windows 10. Is my only option to use my old Windows 7 installation/key to do another clean install, then go through the Windows 10 update again?

View 4 Replies

Installation :: Used Option To Completely Reset PC - Stuck At 99% For An Hour

Aug 7, 2015

Should I be worried. I upgraded from Win 7. It took me to the welcome screen and when I typed in my password it would just hang. Then go black and reboot. So I pressed ctrl alt delete and options came up. I decided to just reinstall basically formatting my hard drive. And it is just hanging there now. At 99%. Is this normal and if not what should I do?

View 7 Replies

Installation :: Fail To Factory Reset And Stuck In Restart

Aug 8, 2015

I'm using windows 8.1 on ASUS N series laptop 64 bit, my windows got problem and after i updated to windows 10 and try to factory reset it, it got to 99% and say that the window has a problem, it cannot reset my windows and stuck in restart loops.

I've spam F9 and try to reset the pc again, but the problem still persist and i even try to solve it with the advanced options ( startup repair, system restore, system image recovery setting - all end up with this pc require administration account, and somehow my account is lost due to reset earlier) i even try to reinstall windows with CD but it doesn't detected.

It seems like i lost both my windows 8 and windows 10 on the laptop.

View 9 Replies

Installation :: Stuck In A Continuous Boot Loop After Reset?

Nov 1, 2015

Earlier this afternoon I decided to reset Windows 10 as I had a problem with BSOD BAD_POOL_CALLING over and over again. I booted in Safe Mode, went to Advanced Options and so on. It wasn't a factory-new reset, just the one that removes all files, app data, etc. I left it for a while and came back to find it hadn't worked; there was an error message that read 'There was a problem whilst restarting your PC'. I tried again and the error message appeared again. Because of this, I decided to exit and continue to Windows 10 and see if it had done anything.

Now, when I try to boot my PC up, the circle that usually rotates on the 'Zoostorm' screen when loading doesn't appear. The PC then reboots and tries again, again and again, but with no success. I have tried turning off and on, and even unplugging everything, however nothing seems to work. My PC is now stuck in a continuous reboot loop and won't load. Unfortunately, I can't press F8 or Shift + F8 when booting to start Safe Mode. I have never made a recovery drive for Windows 10 and I don't think my computer came with a repair disk.

View 9 Replies

Installation :: Trying To Reset PC - Stuck On Choose Keyboard Layout Screen

Sep 25, 2015

I'm trying to reset my PC to get out a temporary user profile I'm stuck on. Every time I start the reset process, I am sent to a frozen Choose Keyboard Layout screen. I can't use my mouse or touchscreen to choose a layout.

View 7 Replies

Installation :: Factory Reset - Circle Loading But Percentage Is Stuck At 61

Jul 31, 2015

I upgraded to windows 10 from windows 7 and then I realized that all my files stayed which I didn't want all my files so I did a factory reset on my windows 10 upgraded PC and it has been stuck at 61% for about 8-9 hours. The circle loading is still moving but the percentage is stuck at 61. I am worried to turn off my PC in case of it being ruined.

View 1 Replies

Installation :: Apple MBP / UEFI Installation Won't Boot After Image Apply

Aug 25, 2015

last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.

I manually setup drive like this:

Code:

select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:

Code:

dism /apply-image /imagefile:g:Sourcesinstall.wim /index:1 /applydir:w:dism /image:w: /set-Timezone:"Central Europe Standard Time"md T:RecoveryWindowsREattrib w:WindowsSystem32RecoveryWinre.wim -h -s -rcopy w:WindowsSystem32RecoveryWinre.wim T:RecoveryWindowsREwinre.wimbcdboot w:windows /s s: /f UEFIw:WindowsSystem32
eagentc /setreimage /path T:RecoveryWindowsRE /target w:Windows

After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.

View 2 Replies

Installation :: UEFI BIOS Settings To Prepare For Installation

Aug 31, 2015

Is it advisable to set the UEFI BIOS (Asus ROG Hero Maximus VI motherboard) to a factory default settings before installing Windows 10? Or should I at least set the memory "XMP" profile?

View 3 Replies

Program By Default - Reset All The Time

Dec 24, 2015

I'm currently running a MSI Leopard, laptop.

I have this one issue. I set up Chrome as my default browser for example, or VLC as my default player for .avi, .mp4, .mkv or else.

But as soon as I will have rebooted the laptop, these settings are reset. Edge for web pages, Windows Media Player for videos etc ...

View 1 Replies

Reset Start Screen To Default

Aug 5, 2015

Is there a way to reset the Start Screen to default without resetting the phone?

View 1 Replies

Installation :: Switching Motherboards With UEFI Installation?

Aug 23, 2015

I currently plan on doing a clean install on a new ssd of Windows 10. My current mobo is a ASUS P8z68-V which has UEFI so I plan on doing a UEFI installation of Windows 10. However, I plan on getting a new processor and motherboard sometime in the future, so would I have to do a reinstall of Windows 10 when I get my new motherboard, or could I expect it to boot up normally as would a traditional BIOS system would work?

View 4 Replies

How To Reset Default File Permissions For These Directories

Oct 25, 2015

The other day, I was trying to fix Windows Default Apps not working by adding "ALL APPLICATION PACKAGES" to the following directories as indicated here: [URL]

However, it seems to have messed up the permissions as what I did was take ownership and then added both myself and "ALL APPLICATION PACKAGES".

My question is, how do I reset the permissions of the following folders and their sub folders and sub files to the defaults:

C:Program Files
C:Windows
C:Users

Does this command below do it?
icacls * /T /Q /C /RESET

My other question is will it fix the folders to the default inheritance if I enabled inheritance to child folders/files for a folder that was by default disabled or if I disabled inheritance to the child folders/files for a folder that is by default enabled?

Other than the above, Am I correct that I will have to manually change the permission for each users folder under C:Users so they own and have full control of that folder.

View 9 Replies

Accounts :: Apps Reset Default Permissions

Jan 30, 2016

Is there anyway to reset the permissions back to Account Unknown() for the WindowsApps folder? I wanted to have a look in it, I changed the ownership to myself and now I just want to reset it back to the default. The default was Account Unknown(sequence of some kind), but you can't just set it back.

View 2 Replies

How To Reset Quick Access Folders To Default

Jul 3, 2015

How to reset the quick access folders in File Manager to default?

View 3 Replies

How To Reset Hosts File Back To Default

Feb 11, 2016

How can I reset the Hosts file back to the default in Windows 10?

View 8 Replies

Factory Reset Stuck On 2%

Nov 4, 2015

I was doing a factory reset on my Windows 10 computer, but it got stuck on 2%. After less than an hour from the beginning it got stuck, and it didn't move all night, although I selected the shorter method (deleting only personal stuff). I manually shut down my PC and I selected the second method. It said it could take few hours. But after half an hour it was still on 1 %. I have just one hdd disk. What could be the problem causing this? I am worried that when I will come back from work, it will still be on 1%.

View 1 Replies

Customization :: Cursor Reset To Default And Scrolling Goes Away On Restart

Sep 18, 2015

So two things; when I restart my computer my saved and in-use cursor always resets back to the default cursor pack that comes with the system. I had this issue in Windows 8.1 too, but now it's getting on my nerves because I've got to go to the cursor customization panel every time I turn my computer back on for 2 reasons.

The second reason is not one I had in any previous versions. On my laptop touch pad, I always use the invisible scroll bar option on the edge, which you can turn on through the Synaptics settings, which is now found in the same panel I use to change my cursor back.

Is there any way to make these two settings default so I don't have to redo them every single time I turn my computer on?

For the cursors, I download/make individual cursors and customized them, saving the general group in a file I call 'custom cursors', I don't download entire packs. I never have to reload the cursor set I'm trying to use, I just have to pull up the panel and click 'ok' to get back out of it, and this updates me to the custom cursors that were already on there, like the system knew I wanted them, but I just sort of had to remind it to activate them. For the Synaptics issue, I never had the problem before the Windows 10 update and I use the scrolling function a LOT.

View 2 Replies

Networking :: Reset Hosts File Back To The Default?

Nov 17, 2015

How can I reset the Hosts file back to the default?

View 3 Replies

PC Stuck At Black Screen After Reset

Jul 29, 2015

i did a full reset last night with the clean driver option, it was staying ar 99 percent for awhile last night so i went to sleep. this morning i woke up to it just stuck at being a black screen.i tried rebooting but it just goes back to a black screen after showing the blue windows icon. what should i do

View 9 Replies

Reset Freeze - Stuck On 58% For A Few Hours

Mar 14, 2016

I had a problem with my computer and the guy at Asus told me to du a windows 10 reset and now it has been stuck on 58% for a few hours. What am I supposed to do? If I turn it off i fear damageing the harddrive or the system all together. 

View 1 Replies

Factory Reset Is Stuck For 9 Hours Now On 35%

Jul 31, 2015

I recently updated to win 10 from win 7. After that i wanted to start fresh so i did a factory reset. I started the reset 9 hours ago and it stuck on 35 % of resetting. I don't know what to do because a video i saw on youtube said it will take 15-30 minutes to reset.

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved