MSI Fast Boot Causing Bluescreen On Every Startup - Mouse And Keyboard Not Starting
Sep 4, 2015
Installed MSI's "Fast boot" software, upon restarting every time I am greeted with a bluescreen mentioning it not detecting a device.
MSI Fast boot also seems to increase the time it takes for the mouse and keyboard to start so when it asks "Press enter to Retry, or F8 to change settings" i cannot do anything as the keyboard and mouse are not on.
Control PanelAll Control Panel ItemsPower OptionsSystem Settings
Unchecking the "Turn on Fast Startup" command in the above setting path does not do it. There is supposed to be a motherboard software for enabling a normal startup the next time the computer is restarted.
I've been reading that having fast startup on in windows 8/10 can cause issues with dual booting systems with other operating systems installed like windows 7. I have windows 7 on one ssd and going to have windows 10 on a second. Will i have to disable fast startup in windows 10 or any other type of hibernation settings.
I have installed windows 10 and it was working great and then I turned on my pc and when it gets to the screen after the blue windows logo where one would normally login my keyboard and mouse will not work. I've tried them on every USB port I have and nothing works.
I'v got a problem. I had 1TB HDD and fast startup was working for me, but when I move my system to a 120GB SSD, I cannot enable it. I'v got Win 10 PRO x64 and laptop MSI GE72-2qf
The issue I am currently having is enabling NumLock before the logon, I have modified the corresponding registry key (Find attached my screenshot below) and that works perfectly fine when restarting my PC, however I have fast-startup (Screenshot also below) enabled and if I shutdown my PC and then boot it up again, NumLock is disabled by default. I have made numerous searches and can't seem to find any information in regards to Fast-startup or any registry keys linked to it and I don't particularly want to disable Fast-startup. Just to clarify, NumLock is always enabled before logon when booting up my PC and Fast-startup is disabled, however with Fast-startup enabled, NumLock is only enabled when restarting my computer.
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
I recently upgraded from Windows 8.1 to Windows 10. At first everything was working fairly smoothly; however, just recently, my startup programs are not starting up when I turn on my computer. Certain programs that are Enabled in my Startup menu are OneDrive, Google Drive, Growl, etc.
I use left handed mouse, and swapping left / buttons works OK. I also set the wheel button to be "double click". But the wheel button brings up the context menu instead of double click. If I change to right hand mouse, the wheel button gives double click as expected. how to make the wheel button give double click for left hand mouse?
Okay, so I take blame for accidentally messing up my Windows 10. My NVIDIA graphics card wasn't working and wasn't letting me install my drivers. Well that aside, now that I installed older Drivers Windows 10 registers something horribly wrong. It wants to do a system repair. Okay, good, fine with me. But then when it gets to the page for me to select a keyboard layout, I have no mouse and my keyboard doesn't work either.
Anytime I press a button on them their backlights turn on, but then turn back off when I don't do anything with them.
I can't afford to get a new OS, I have no DVD Drive so I definitely can't do anything that requires a disk. What do I do?
I have a new configuration (z170 chipset, i3-6320, fast SSD) for my desktop and it boots slower than my laptop (Acer V3-574G (i7-5500) with the same SSD as my desktop). I don't think the i3-6320 vs i7-5500 can explain such difference.First thing is that Hibernation and Fastboot are activated but not working on my dektop PC: command "Get-WinEvent -ProviderName Microsoft-Windows-Kernel-boot -MaxEvents 10 | Where-Object {$_.id -like 27}" gives me 0x0 (cold boot from full shutdown). Parameters ares ok in settings and in registry (hiberboot = 1).I tried using Fast boot and MSI fast boot in the bios: no effect. I tried to enable win10 whql in bios but it is disabled after rebooting, with a warning message saying that my graphic card does not have GOP.So, I'm not able to fast boot due to an "old" hd7750 graphic card ?
So I just upgraded my wife's computer and noticed it loads directly to my account which has no password. When I restart it never asks who's account I want to logon to, just goes to mine. Of the three computer I've upgraded this is the first to do this. Also in the power options I can't find the option for fast boot.
Laptop is Lenovo X220 that had Windows 7 Pro and upgraded to W10. It has had already 5 vanilla installs of 10 Pro 1511 on it.
2x install with an old 3.5" 5400 RPM stock HDD drive and the 4-5th and final install with an upgrade to an SSD. The HDD was changed to SSD because of me thinking the HDD was dead and was causing the computer to lock up at boot.
Tried 3 different operating systems on the machine as well, Windows 7 (no problems) (stock with computer), Windows 8.1 (with Fast Boot) enabled and no problems on Windows 8.1 O/S and finally W10 PRO 1511, vanilla from Microsoft directly.
For some reason after W10 installs, does its updates, reboots, drivers are updated and everything seems fine after a couple of reboots and such. Works normally, wakes up from sleep. Only 3 programs get added. Firefox, Chrome and WinRar.
After that shutdowns OK, but when she boots up it gets past the welcome screen and hangs on the desktop. Complete hang everything becomes unresponsive, but the mouse pointer. I can dance the pointer around but No keyboard input no GUI input, nothing. Only way to come out is with a POWER BUTTON DOWN. Was trying to solve this issue since December and never found any solution, thought it was drivers or internet, or hardware but nothing, no dice. Even if it didn't connect to the internet after install and a program or 2 were added via USB and I shut down it would hang upon next boot.
So I did reading and reading and researching and I came upon a thread that mentioned W10 hangs on welcome screen with Fast Boot on, I thought no this can't be it because I make it past the welcome screen. I hang on the desktop when I'm actually in Windows. I can manage to click Start button and the system will hang. Only way to get it to respond is to hold down the power and power it down. Temps seem OK, MEMTEST came back fine, replaced HDD with SSD, only other thing I could think out was drivers or hardware (mobo) failure or something else ....
Then I decided to clean install update drivers via Internet, reboot and then disable FAST BOOT via @Brink regedit hack, because for some weird reason, on this machine on every clean install, FAST BOOT IS NEVER SHOWED in the POWER menu. I could not understand this. I do not have this option at all like @Brink has in his diagram photo. The option is just not there!!! But the registry though the hiberbootenabled value is set to "1".
So two questions, why is it checked and greyed out (that I cannot uncheck it) and 2, the only way I was able to change the value was manually via @Brink registry edit.
OPTION 2 - using a bat file because option 1 was unavailable. Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums
Once I disabled FAST BOOT, the laptop has been fine since. No locking up anymore period!
SSD is 850EVO and W10 PRO is the only O/S on the machine, legit with digital entitlement upgraded from W7 PRO key on the Lenovo, because its an X220 thinkpad so 'business' series. No problems since.
#1 Fast Boot option to disable on startup is not avialable on the machine? Value is "1" in registry but cannot make changes to it via control panel as it simply is just not there. (This was the case with both HDD and new SSD). Windows 8.1 shows the option, not 10.
#2 Hangs on startup after welcome screen
#3 Only way to prevent is to run the .bat file from @Brink or manually edit value in regedit, save, exit, shutdown, go on with life.
AFAIK value in REGISTRY is set at '0' and machine works ....
Brink has this option on his machine via control panel but I do not on the laptop. Brinks:
My PC does not give me that option at all. Is if it doesn't even exist.
I've been in the Windows Insider program since it started, getting every new build, and I usually hibernate my PC to keep all my apps open, only rebooting for updates that need it.
This has been fine on Windows 8, 8.1 and 10, up until the November update. I downloaded the initial, "faulty" November ISO with the media creation tool, but didn't get round to installing it until after it'd been pulled and reinstated. So I used NTLite to integrate that update in to the ISO I already had and did a clean install of that.
Everything was great until the next morning when I turned it on again. It booted as normal until it got to the Windows boot screen, which flashed on screen for 1 second or so before the PC just instantly powered down, like someone had pulled the plug out.
I troubleshooted this for ages and eventually worked out it's hibernation and fast boot - the only way to make the PC boot properly again is to go in to the BIOS and change the amount of memory given to the integrated GPU so you're effectively changing the hardware of the machine, which makes Windows dump the hibernate images and boot from scratch.
Intel i7-4720HQ processor nVidia GTX 960M Intel HD Graphics 4600
Every time I start off a boot, my intel display driver fails to work. Right after logging in on Windows 10, I can clearly see that the animations are laggy and my computer isn't running on the intel HD 4600 driver. When I open up the device manager I get a yellow triangle next to the driver and I have to disable it and re-enable it, for it to work. This happens after every boot and it's annoying. Everything is up-to-date. And I tried system restore, didn't work. BIOS reset, didn't work. It's a laptop so there is no switching ports and what not.
I have a laptop which had Windows 7 installed on a normal HDD and an SSD which I added after it was lying around spare. I then updated to Windows 10 via the free upgrade. Everything was working fine, and I decided to put Windows 10 on the SSD for quicker booting.
I did a clean install on the SSD using the Windows 10 installation media and everything now works fine until I shut down the laptop.
After powering on and seeing the Bios screen I then just get a black screen and the boot menu to choose which OS to boot off (Windows 10 is now installed on both the HDD and the SSD) does not appear.
A workaround is to go into the Bios after powering on and exiting the Bios without making any changes, then the boot menu appears as normal and I can log in to either installed OS. Also if I'm in Windows and restart then everything works as expected.
I've tried the repair tools from the Windows 10 installation media., which said there was nothing to repair, and have tried swapping to the old text based boot menu, which had the same problems.
I have a Dell XPS 17 laptop. Worked great under Windows 7. Tried Windows 10 but was unable to get the wireless LAN driver to work, so I went back to Win 7 via the official "Go Back to Windows 7" option in Windows 10 - now the keyboard and mouse won't respond after start up. They work fine in the bios, but are completely unresponsive on the login screen - even when I boot in safe mode. No USB ports work, so I can't try another keyboard/mouse. Was going to reinstall but I'll lose the existing data. Now I'm going to have to pull the drive and copy over manually, then reinstall. Last thing I was going to try was disabling EVERYTHING in the BIOS just in case there was some kind of weird IRQ conflict, etc.
Whenever my laptop goes to sleep, the only way to wake it up is through the laptop's keyboard (pressing any key on the keyboard). But when I press the USB keyboard or the USB mouse, it doesn't wake up.I use my laptop mostly as a "desktop": I connect it through an HDMI cable to a larger 24" monitor, and the laptop is lying closed in the corner. It is just annoying to open the laptop and press the keyboard.. not a big deal, but if it's possible to change that it will be good !
So my computer started running a bit slower then it should be, at the point where my computer to open would take half a min, so i did fresh install. So i left installation overnight, i wake up in the morning and it say "Hi there" installation menu where you choose Country, language, keyboard layout and timezone, but it's totally froze, i can not see mouse cursor or use my keyboard, if my monitor goes to sleep i can't turn it on back. I did read that it's problem with drivers not installed. I've tried restarting pc few times. Is it true that problem is with drivers not installed correctly or at all?
I recently re-installed Windows 10 on my Asus X205TA notebook using the ISO on a USB stick.It installed without a problem, but when I boot the computer now (first boot after installation), the OS does not recognise the keyboard and the mouse, so I cannot enter the required data to proceed to the next screen..
Seems like the required drivers are missing, and I am thinking a re-install may be necessary, but how to get the keyboard and mouse drivers included (inserted?) in the installation process?
turned my computer on yesterday and it loaded up fine, apart from there was no cursor and my keyboard wouldn't work. I have a R.A.T. 5 mouse and a Coolermaster QuickFire keyboard. I know that they're on and working because their LED's are on. I decided to plug in my old ps2 keyboard and restart my PC to enter BIOS. I checked and it recognises that the keyboard and the mouse are connected into the USB hub and says they're working. Another thing, even my ps2 keyboard doesn't work when my computer gets past the start screen!
