Networking :: Workgroup On Desktop And Laptop Not Working
Oct 17, 2015
I have a workgroup on desktop and laptop both running windows 10 - it was functioning not long ago but recently stopped and i cant figure out why. i've pfoofed round so much trying to get it going again i've probably made it worse
I just want to access some files between computers and connect to printer attached to desktop
I can ping desktop from laptop but not reverse desktop to laptop - kaspersky is on both machines.
I tried setting up a homegroup but no luck there either - both machines can still access the internet thru netgear cgd24nv3.
View 9 Replies
Similar Messages:
Jun 24, 2015
I'm finding Windows 10 enjoyable and pleasant for the most part.
Unfortunately, some things that are easy to find or to do (probably due to years of experience) in Windows 7 and 8/8.1 are not easy to find, assuming they exist at all, in Windows 10 build 10130. For instance, I've looked high and low for "Change PC Settings" and it is like the proverbial needle in the haystack.
My present problem is that I can't see other computers in my network/workgroup. They are visible to my Windows 7 and 8.1 computers. My network is set to private in Windows 10. Find devices is set to on.
I note that I can ping all my devices, Squeezeboxes, WDMycloud hard disk, chromecast, computers etc., and the squeezeboxes, Logitech Media Server , WDMYcloud and Chromecast are showing up as devices.
View 9 Replies
Nov 18, 2015
Drive C: on a new win10 laptop is marked Shared for Everyone, read+write+control (because it will hold a webserver and database server that must be manageable from other workstations in the workgroup).
Yet win10 refuses access to a map-network-drive request from File Explorer run as administrator on any win7 machine in the same workgroup.
View 3 Replies
Dec 13, 2015
I have 3 pc's in my LAN
Mark= Win7 32 bit
Dave= Win10 32 bit
HTPC = Win10 64 bit
I'm trying to share the files on HTPC and have created a workgroup.
Dave and Mark can share files
Mark and HTPC can share files
But Dave who can connect to the win7 pc through the workgroup can't connect to HTPC. Error is Windows can't communicate with the device or resource (HTPC). The computer or service you are trying to reach might be temporarily unavailable. If the device or resource is nearby and you have access to it, make sure it is turned on and connected to the network.
Since the win7 pc can connect to the win10 HTPC why can't the win10 pc?
View 8 Replies
Jan 21, 2016
We have a peer to peer network, with one Win 10 machine (acting as server - which we call server) which shares several hard drives for everyone in the office to access. It has network discovery on, file and printer sharing on, turn off password protected sharing off. It has all the drives named and shared properly so everyone has full access. All the other Win 7, and Win 8 machines have complete access as designed.
Another Win 10 machine has complete access as designed. All machines are part of the same workgroup Engineer. My machine is a Lenovo laptop which was upgraded from Win 8 to Win 10. When I try to access the Win 10 machine (which is acting as server), I get the Enter Network credentials pop-up asking for Username and Password which we do not use nor have ever set up on the Win 10 machine or any other. I know that there are several posts that have the Enter Network credentials popping up, but the difference is that their screenshot showed them as part of a workgroup.
See the following:
When I get the same pop-up on my Lenovo Laptop It looks like the following ....
My System Properties information ....
Notice that the example above which is part of the workgroup has no reference to a domain. My pop-up on the Laptop shows reference to a domain, and whats interesting is that the domain is the computer name of the laptop itself. There are no domains set up on any machine of our peer to peer network.
View 2 Replies
Nov 10, 2015
I have so far avoided using Windows ID login (except on a sacrificial VM I use for Windows Insider(*)) as I can no longer access the SMB shares that I have set up.
Is there any way for the two to co-exist? I can't get my head round using SMB shares and NTFS permissions with Windows Live ID - is it possible in any way at all, or have MS (as usual) given us a "new spiffy improved thing" which is actually none of the above?
Why can't I use a local login AND have have access to the Insider programme?
View 3 Replies
Oct 5, 2015
My network is really simple. A win10 laptop and a win10 desktop. The desktop has a couple of hard drives and the laptop needs to see one of them.
At various times it's all been good but then something mysterious happens and we're back to square one.
So I've set up a homegroup and both computers belong to itI've set up sharing so that the homegroup can read/writeI've added my husbands email address as a user on the desktop and accepted the invitation so that it doesn't show as pending
Yet, when I go to the laptop I can see the homegroup and the two computers that are in itI can see the network and the same two computersIf I click on the drives I get a no-permission error
View 5 Replies
Dec 20, 2015
I am having trouble getting RDP to work on my PC. I have checked everything. But I can RDP from my PC to my laptop.
I have on both laptops a password, (I do have the same username, could that conflict?) I have on both PC's the latest W10 update (10586) and I can ping both PC's to eachother. I have disabled my second network card on my PC but still nothing.
View 4 Replies
Jan 11, 2016
Have loaded Windows 10 to both desktop and laptop. Desktop works fine, but laptop comes up with something like 'not in correct area to accept Cortana'. As both machines are in the same building I don't understand!!
View 2 Replies
Feb 10, 2016
On Desktop computer have OODLES of storage and multi-media file but slow Wifi card.
Laptop (new) has mega fast Wifi - AC 5GHZ. Almost as fast as LAN.
Want to chromecast some movies to a TV in a friends house.
Can I direct Wire the laptop to the desktop so I can share the multimedia files and then use the laptops fast Wifi to beam it to the remote TV via chromecast.
I can't run Lan cables all over the place - but if a direct connection can allow me to use the WIFI adapter of the laptop then problem solved.
What sort of cable do I need -- I don't believe you can just stick a bit of Lan cable between the two computers (or can you).
Years ago there was a thing called LAPLINK -- relied on old serial COM ports --that would be too slow - and in any case no COM ports on these computers.
I don't care if it's "Heath Robinson" --it's not a permanent setup - but we want to watch a load of movies etc and his wifi isn't fast enough (the ISP internet service is superfine and his router is capable of high wifi speed), --We've been banished to his shed where the computer is - because the women want to do something else !!!!.
Note - normal sharing works but is a bit of an abysmal failure since I can only get about 500 Kbs -not Mbs !!!!!) from his wifi card on the desktop so normal sharing is TOO slow. The data won't get delivered to the laptops wifi fast enough to watch the movies without re-buffering every few secs - especially if it's 1080p with subtitles that usually need transcoding on the fly).
View 8 Replies
Nov 15, 2015
My router is supplying IPv6 to all the LAN clients in my house. In particular, IPv6 is working on my Windows 10 desktop computer, but not this laptop. This laptop is a Windows 10 Pro OS, and I don't see IPv6 connectivity when I look at the connection in the Network and Sharing Center. When I look at the network adapter (wired) properties, it shows that IPv6 is enabled in the networking software.
The laptop used to have IPv6 connectivity with Windows 10 before I installed the giant threshold 2 update last night, now IPv6 not working on the laptop.
what I can do to diagnose the problem with the laptop? I've run the Windows troubleshooters, and they don't find any problems (of course). Even my Apple and Android mobile clients have IPv6 connectivity.
View 1 Replies
Nov 7, 2015
All of a sudden my XBOX 360 controller has stopped working on my desktop. I will connect it to a port it will blink 2-3 times and then it won't show up on device manager or anywhere. It was working just a few days back. I purchased Project Cars and now am panicked since I don't have money for a wheel and can't drive with keyboard. I thought maybe it was the controller itself, but it works fine on laptop-lights up in middle and can use it with emulator. Here is my desktop specs.
GB z77x-d3h mb 3770k at 4.3
GTX 960 2 GB Windows 10 pro 64 bit with latest build
16 GB RAM,
Here is what I have done so far. Tried multiple USB ports on back of computer. No luck. Does same thing with all of them Tried to use device manager and scan for hardware changes-no luck there. Tried downloading XBox 360 controller accessories from MS. No luck there
View 1 Replies
Jan 28, 2016
after installing a replacement GPU, RDP now only connects to the home server when i have "use all my monitors" enabled.If i have it unticked the session will try to open on my second monitor - which is connected to the onboard GPU, unlike the first, which is connected to the discrete one - as usual, but blurt out a connection error after starting to render the remote desktop.If i tick "use all my monitors" in RDP settings, a connection is made, but displayed on my main screen.
View 2 Replies
Feb 21, 2016
Both the Windows 10 laptop and the Windows Vista laptop have discovery on and file and printer sharing on. The printer is connected to the Windows Vista laptop. The Windows Vista laptop can see the files within the Windows 10 laptop. The Windows 10 laptop can see the Windows Vista computer but as soon as it tries to see inside it gives an error about "spelling of the name, etc." If using the diagnosis tool it says "One or more network protocols are missing from this computer". "Resolving problems as administrator" does not solve anything.
View 3 Replies
Feb 22, 2016
I have a laptop running Windows 7 that is connected to a printer. I am connected to the internet using a WiFi connection. I have a homegroup called workgroup. My wife has a laptop running Windows 7, connects to the internet using the same WiFi modem and prints using the printer on my laptop.
I downloaded Windows 10 on to my Windows 7 laptop and all of a sudden my wife can't print anymore. Microsoft, you've done it again. How I hate this!
I fooled around with HomeGroup settings on the Windows 10 laptop and the system attributes on my wife's laptop and now I can see her computer on my Windows 10 system. But I cannot see the printer on my system from her laptop.
I tried to click on my compueter from her laptop and I get a request for username and password. I don't know what username and password to use. I gather from reading the forum that I should put the name of my laptop in the username but I don't know where to look for the password.
View 4 Replies
Oct 25, 2015
I've got a Lenovo Desktop that was upgraded from 8.1 to 10 just after the release. I have a Toshiba Laptop which I upgraded from 7 to 10 about a month ago. Occasionally, the desktop screen for the desktop would be the default desktop image for the Toshiba laptop with "Toshiba" in the lower right corner.
Last night I performed a clean install of 10 on my Laptop. I went to bed and let the laptop work the updates as I was sleeping. When I woke up the Lenovo, again, the desktop showed the Toshiba default image rather than the one I had changed it to previously.
I had researched the issue but only after making this post is when I realized that all accounts under the same Microsoft ID will sync, including the desktop personalization. Not exactly a feature that I like. I'd like to turn that feature off.
View 3 Replies
Feb 1, 2016
I have an issue with my system after upgrading to Windows 10. I have work group at home with several PCs some with XP and other with 8, tables, and Windows 7. After the update, I checked the Group name and sure it was there, but when I tried to add a printer from one of the systems on the group, yes it is set to be share, I can not see it and looking under Network and groups a Home group was created using my system name. I cannot remove it and it doesn't seem to have joined the current work group.
I have tried changing the name, changing the share options under Network, and nothing. I just can't get the system to join the group as previous to the Win10 upgrade. I am actually considering doing an re-image of the system to get back wind7.
View 1 Replies
Feb 20, 2016
my computer is automatically connected to an unauthorized/unknown WORKGROUP network - which I believe is a malicious connection. On top of the connection being a persistent login, the settings seem to be locked in as well, preventing edits/changes. If so, is it possible to regain control, and prevent future threats? At first, I figured that maybe all Win-10 home pre-installed OS's just connected to WG's by default; however, I tested my theory in two different computer stores, but this wasn't the case for any of their systems with home edition installed. At some point I reached out to Microsoft tech support (which I can't afford right now) - they were uncertain, but suggested, for hundreds, that I allow them to tweak some registry keys and/or system32 settings.
View 1 Replies
Aug 18, 2015
Since I've upgraded to windows 10 a couple weeks ago, I've come to notice in the last couple days that when I press shut down from the start menu, typing shutdown -s -t 0, etc. it does not completely shut down the computer. It starts to go through the process, it says it's shutting down, monitors turn off, but the power light stays on and it just restarts. I have only gotten it to shut down correctly about 85% of the time through the login screen and pressing and holding the power button (which I know I should refrain from). I am completely up to date on windows. I have not made any hardware changes since my upgrade to 10.
This issue has also now come up on my Lenovo G50 laptop. Same shtick, says it's shutting down but ends up restarting, never shutting down completely. I also have since reverted to Windows 7 on my desktop and have no issues. I have unchecked the hybrid shutdown box on my laptop.
View 1 Replies
Oct 25, 2015
I am going to get a new laptop and want to setup settings / desktop the same as old Laptop.
Both laptops have Windows 10.
how this can be done without doing it manually so I can save time?
View 4 Replies
Mar 5, 2016
"My Documents" has been correctly relocated from C: to E:. The C: drive was getting full. Using the PC, all is well.
The network is fine and my laptop sees the PC, and PC sees the laptop.
However, when I click my [Username] folder on the PC from the laptop, the folders I see are on the C: drive, not the E: drive.
How do I make my [Username] folder on drive E: accessible over the netork?
Other family members/usernames whose files are on the PC's C: drive exclusively have no problem accessing them from their laptops or phones.
The laptop is Win7 and the PC Win10 Pro. The phones are both Android and iOS.
View 9 Replies
Aug 29, 2015
I recently upgraded to Windows 10 and was happy with the new OS but lately I have been having issues with the Wi-Fi since it disconnects randomly several times during the day. It seems to "turn off" on its own and comes back up after a while. It's annoying and I didn't have this issue with OS 8.1. If possible, I'd like to solve the problem. I've thought about reverting back to 8.1 but I've misplaced the key and it's not in a sticker underneath either so I can't really do that now. The option that most people show by going to 'Recovery' doesn't work because it says the 'necessary files have been deleted' so I can't proceed that route anymore.
View 7 Replies
Oct 3, 2015
Experienced this problem of losing wifi drivers after installing win 10, my hp laptop does not detect wifi but if I plug in ethernet cable the internet connection is sporadic.
View 3 Replies
Jan 25, 2016
Brought a new Dell laptop and came with windows 10 and i can't get it to connect to wifi. It worked perfectly at my mums, but at home it says wifi password incorrect when its not. I have updated drivers, disabled and enabled the wireless adapter. In command prompt i type ipconfig/renew it says no operation can be performed.
View 11 Replies
Sep 28, 2015
for a while now my laptop won't let me upload anything to the internet. I have used different computers and it works for them so it can't be my WIFI.
View 19 Replies
Jan 10, 2016
I have recently purchased a new 4k television and sometimes plug my laptop via an HDMI cable to it for gaming. When I connect, the desktop is zoomed in and some games do not run because of this.. Now I had this issue with a standard 1080p TV, it was a simple fix of adjusting the Change the size of text ,apps and other items slide bar under settings/system/display. Games would start working and thedesktop would resume its normal size. But with this 4k TV, the Change of size of text bar and not selectable along with a number of other options, like resolution (I have to do this via the Intel Graphics Control Panel. Some games do not like working whilst the desktop is set to zoom
View 1 Replies
