Networking :: Can't Access The Default Shares
Aug 6, 2015I have two Windows 10 PCs on the same home network and I can't access the default shares on either one of them, I keep getting 'Access denied'.
View 9 Replies
Similar Messages:
Networking :: Cannot Access Windows Network Shares
Jan 25, 2016Three machines:
Surface Pro 4 - fully updated
Surface Pro 3 - Windows 10, fully updated
Lenovo X220T - Windows 8.1 Fully updated
All three machines can see all available network devices, including each other.All three machines can successfully access and interact with third party network devices. In this case, it is a NAS and a network printer.The windows 8.1 machine can access each of the other windows 10 machinesNeither Windows 10 machines can access any other windows share on the network.
This gets me error 80070035 with diagnostics telling me nothing
All three machines are on a Homegroup and while each can see, no one can access anything
Trouble shooting tried:
Double checked all sharing settings on all three computers. They are identical.Double checked workgroupsTried it via IP addressesReset winsock on all machinesFlushed DNS on all machinesReset the routerUninstalled and reinstalled Windows sharing and about 3 other network protocols and servicesEnabled NetBiosran this: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi sc.exe config mrxsmb20 start= disabledMessing around with all sorts of netsh commands clearing and flushing all sorts of other things
Networking :: Shares No Longer Visible Can't See Other Shares
Feb 23, 2016I just switched to a new router (from DLink DIR-655 to TP-Link Archer C7) and now my Windows 10 Pro cannot see network shares nor can others on the network see its shares. Prior to the router switch, it could see shares and others could see the shares it exposed.
The Win10Pro can see the internet. I can still ping other computers and they can ping the Win10Pro, just no Windows sharing. All computers are in the same Workgroup. I am not using a Homegroup; computer connections are made with user accounts.
The Windows 10 Pro is connected via wire. When I made the switch, I remember that Win10 came up and told me it had a new network and prompted whether to allow network discovery - to which I said yes. I thought that odd at the time since changing the router didn't change the NIC connection from the Win10 -- but whatever. However, it did change the IP address on the Win10Pro from what it was. But I've since rebooted all computers (thinking that might cause them to refresh) but no improvement.
Advanced Sharing Settings are set as:
Private: Network Discover = ON, File and Printer Sharing = ONAll Networks: Password Protected Sharing = ON, Public Folder Sharing = ON
Networking :: Samba Shares Don't Show Up
Nov 22, 2015I was running Windows 7 on my laptop. I have a file server running Linux and Samba. When I open the Network icon in Windows 7, I see my server there and I can open it and access the associated folder shares.I upgraded to Windows 10. Now if I double click the network icon, I don't see any machines except my local client laptop. However, if I enter the UNC path to my samba server (myserver) into the path bar of Windows Explorer, I can access the server. If I want to add a network printer to my laptop that is shared by the server, it won't find the server in the search list. However, I can enter the literal UNC path to the printer and add it. So it has something to do with nmb I think? Not sure.
View 9 RepliesNetworking :: Accessing Administrative Shares
Feb 10, 2016I have a networked Windows 10 Pro computer A with built-in 'Administrator' account disabled. However, it has a "normal" administrator account named 'Admin'.
I would like to access administrative share 'AC$' from another computer B in the network. Windows asks me for access credentials. I enter 'Admin' and the corresponding password. This results in "access denied" error.
Hence the question: What's preventing the access?
My guesses are
1. (Unlikely: ) Administrative shares are accessible to the built-in 'Administrator' only.
2. (More likely: ) Administrative shares are accessible to a designated set of users and there's a way to control it. My homemade 'Admin' is not on the list.
3. (Most likely: ) Network access to administrative shares is completely disabled by default in Windows 10, but can be enabled somehow.
Networking :: Can't Write To Unix CIF Shares
Jan 4, 2016I have a Freenas Server (based on FreeBSD Unix) connected to my network. I can't get it to show up in file explorer untill I type "//000.000.000.000" (it's IP address). When I try to drag a file to the window CIF shares (Permissions in Unix are Allow Guest Access and Recursively set sane default windows permissions on share) I get the error "You Need Permission to Perform this Action". Both of these features worked on Win 7 Pro before I did an upgrade to Win 10 Pro. I also did a fresh install of Win 10 Pro and it made no difference so I restored a Macrium image of the Win10 Pro Upgrade.
View 8 RepliesNetworking :: Can't Browse Network Shares
Nov 17, 2015After 1511 update this morning and changing nothing else, I can no longer access computername..
View 1 RepliesNetworking :: Cannot See Computers On Network Shares
Feb 10, 2016I have 3 computers on the network. All have shared folders . My problem is as follows.
Lets call the computers c2, c3, c4. I am using network shares
When on computer c4 , computers c2 and c3 are not listed at all under network. Sometimes I do see c3 listed but cannot access it.
In computers c2 and c3 , all computers are listed and I can view all the shared folders in c2 , c3 including those on C4.
I cant understand why c4 have such problems viewing other computers on the network. I have rebooted router ( E4200) and computers but still have same problem .
All shared folders are properly shared. and no passwords are required for networks in adv sharing .
Networking :: SMB To Shares On USB Storage Does Not Work
Nov 29, 2015I have several usb-connected drives and several SATA drives on a Win7Pro-64 system just upgraded to Win10. The only account on the machine is a local administrator account. On each drive I have a shared folder.
Where before I could connect via SMB/Samba from non-Windows networked devices using the local account credentials, I can now only access the shares on SATA drives. Any share on a USB drive is inaccessible to, say, ES File Explorer or Astro on a Android Tablet (although the share name can be read).
I can still access all shares from another Windows 10 machine. All devices have the proper Workgroup.
Clearly there is some SMB policy change in Windows 10. I've seen one fix for network drives but it doesn't seem to apply here (and also doesn;t work). Also not working is anonymous login to shares with with Everyone access, which also used to work.
Networking :: Unable To Map Network Shares?
Nov 15, 2015I've got 2 Western Digital Network drives hard wired on my network, a My Book World and an EX2.
Since upgrading to Windows 10 I've had intermittent problems viewing and setting network drives. I've read a lot of other posts and tried a number of things suggested without success.
The WD Discovery tool finds the Network drives, but the box to map network drive is greyed out. I can access the desktop control panel from my browser. If I try to add a network location the drives are not listed. If I try to add the drive letter WDMYCLOUDEX2Public the network path is not found?
I have another Windows 10 computer on the network which can access the drives without issue - so it must be a setting on my PC. Tried disabling my Kaspersky security - still not being seen? I suspect that this has been as a result of a windows upgrade?
Networking :: Homegroup - Accessing Shares Asks For Credentials?
Jan 26, 2016Several PCs in my store.. some running W7 starter, some W10 Home pro.
A few days ago suddenly I could no longer access a folder on another W10 computer, where we tend to store a lot of important documents. The computer where the other folder is, runs also W10.
Shares are usually done vie HomeGroup - share with home group users.Other computers on the network have no problem accessing it. Furthermore, I can access it from another local account on my computer, but not from my main account (which is a MS account)..It asks for credentials, although I am a homegroup user.. nevertheless I enter the other computer's only username and password (admin ones) and it still does not let me in. Try my own MS user and pass - also "wrong".
Tried leaving and joining the Homegroup.
Tried restarting network related services and setting them on Automatic.
Tried homegroup troubleshooter - says probable problem is with network, so should run Network troubleshooter.
I do so and it shows error:This network troubleshooter shows error: resource (peer to peer grouping) is online, but not responding to connection attempts.
Following the latter and some google searches, I tried adding DisabledComponents" DWORD with "0"value in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesTCPIP6Parameters
But still NO-GO.
Networking :: Workgroup Shares Windows ID Versus Local Accounts
Nov 10, 2015I have so far avoided using Windows ID login (except on a sacrificial VM I use for Windows Insider(*)) as I can no longer access the SMB shares that I have set up.
Is there any way for the two to co-exist? I can't get my head round using SMB shares and NTFS permissions with Windows Live ID - is it possible in any way at all, or have MS (as usual) given us a "new spiffy improved thing" which is actually none of the above?
Why can't I use a local login AND have have access to the Insider programme?
Networking :: How To Set Shares Using MS Account - Works Fine When LOCAL Account
Jul 2, 2015Using a LOCAL account I have no problem with Shares -- how do I set these now using an Ms account.
Samba just times out trying to access Windows machine where I'm logged on with an Ms account. Also I can't access other Windows machines from the Ms account. The other Windows machines can't access the Windows machine where I'm logged on with an Ms account.
All these problems DISAPPEAR when using a LOCAL account.
I think my future strategy will be just keep a MINIMAL Windows VM with an Ms account to GET the insider builds and then revert back to Local accounts.
Networking :: Internet Access But No Network Access
Nov 24, 2015My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
How To Reset Quick Access Folders To Default
Jul 3, 2015How to reset the quick access folders in File Manager to default?
View 3 RepliesAccess Denied - Moving Pictures Folder To Default Or Other Locations
Jun 8, 2015I changed the location the of my Pictures folder from the default C:usersmynamePictures to D:onedrivepictures, Worked great until I decided to use new Google Photo on Google Drive. Using File Explorer, I moved all photos from D:one drivepictures to E:Google DriveGoogle Photos. Then went to library/Pictures/properties/location/move and selected my new folder E:Google DriveGoogle Photos, hit apply, responded no to 'do you want to move all the files' and got pop up 'Folder cant be moved here - Access Denied.
I've tried restore to original, created other test folders on drive D and E - it wont save to any other location or restore to default location - get the Access denied.
Networking :: No LAN Access
Jan 23, 2016I installed Windows 10 Enterprise and after 30 minutes, after one restart, LAN stopped working. I have internet connection but I can't acces my LAN (laptop and storage server). My PC has a Realtek PCI GBE Family Controller.
I tried to update the driver, but it is already up to date..
Networking :: No Access To NAS Drive?
Sep 27, 2015I can see that this seems to be a common problem on here! I have a Lacie cloudbox NAS drive. On WIn7 pro it worked just fine. Windows say the drive in the network group and I could access it like a normal folder.
After I did the Win10 upgrade and it initially worked fine. For other reasons I had to do a fresh install of WIn10 and wipe the hard drive and start from scratch. Ever since then I've not been able to access my NAS drive.
For privacy reasons, during the installation, I turned off many of the sharing and 'open' features of Win10 and always log in with a local account.
Networking :: Can't Access Network
Jan 10, 2016I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
Networking :: No Network Access
Nov 8, 2015Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
Networking :: Cannot Access NAS From PC Since Installing
Dec 8, 2015Other devices in the house seem to be accessing it normally, so I suppose it's an issue on this end. Sometimes, when I restart, I can access it, but it disappears after a while.
Error: error code 0x80070035 Network error. Windows Cannot Access NAS-M25 Check the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnose
Make sure the computer or device is turned on and connected to the network
Specs (I don't know what you need so I just copied it. NAS is Asus NAS-M25 2 Bay)
OS Name Microsoft Windows 10 Home Version 10.0.10586 Build 10586
System Manufacturer MSI System Model MS-7816
System Type x64-based
PC Processor Intel(R) Core(TM) i5-4670K
CPU @ 3.40GHz, 4201 Mhz, 4 Core(s), 4 Logical Processor(s)
[Code]....
Networking :: Cannot Access Net Or Email
Dec 1, 2015After purchasing a new computer and upgrading to WN 10, I had allsorts of trouble getting my scanner and printer to work -- finally got that solved, but then when I try to log on to the internet I get the "Hmmm ..." message. I can't access the net or e-mail, and my wife who has an I Pad and is using a wireless router can't access the net or e-mail either. My grandson is not available for a few days.
View 2 RepliesNetworking :: No Internet Access
Aug 9, 2015Upgraded to windows last week and all has been great. Today, I lost internet connectivity on my Windows 10 PC this morning. I still have Network access to view the Windows 10 machine from the rest of my network. . Restarted the router and modem and still no internet access. Device manager says no issues with my Realtek Network card.
View 4 RepliesNetworking :: Reset Hosts File Back To The Default?
Nov 17, 2015How can I reset the Hosts file back to the default?
View 3 RepliesNetworking :: Restore Network Protocols To Default Settings
Feb 24, 2016Trying to reinstall a WD MyBook external hard drive. Receiving the following "One or more network protocols are missing on this computer" Following diagnosis receiving "Restore network protocols to default settings", and "Windows Sockets registry entries required for network connectivity are missing". My computer is an HP Pavilion 23 all-in-one. My wireless router (connected with an Ethernet cord) is an ATT 67XHG8k.
View 4 RepliesNetworking :: Lost Internet Connection - Default Gateway Is Not Available
Dec 7, 2015I just upgraded my desktop to 10 Pro and lost the internet connection. The wireless network appears to be working OK. When I run the diagnostic it produces this message.
"The default gateway is not available"...
