Performance :: Corrupt Files On 3 Computers After Upgrading To TH2
Nov 15, 2015
can some of you do an sfc /scannow and check your results with the November update installed? I always do this when i finish installations, and on 3 computers and 4 installations on them, 2 on one computer just to be sure i am getting corrupt files and struggling with my anger to not go back to windows 7 and get rid of all win 10 problems and MS ignorance. here is my results, many corrupted files in the log.. but is long so i don't post it...
Microsoft Windows [Version 10.0.10586](c) 2016 Microsoft Corporation. All rights reserved.
C:WINDOWSsystem32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log. Note that logging is currently not supported in offline servicing scenarios.
View 9 Replies
Similar Messages:
Jan 15, 2016
After almost every update, if I run sfc it reports corrupt files. Sometimes it cures them, sometimes I have to run dism, and this time neither work.
View 1 Replies
Sep 4, 2015
I ran sfc /scannow in an admin command prompt, however when it completes I receive this message:
"Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For
example C:WindowsLogsCBSCBS.log. Note that logging is currently not
supported in offline servicing scenarios."
I think that it may be somehow related to a few errors happening on my laptop--such as live tiles not working, and the inability to use some apps without crashes.
View 9 Replies
Nov 13, 2015
just wanted to know what should one do if one gets the error and how does one troubleshoot it properly?
I looked up the log on my system but it's just a really big lump of text.
View 5 Replies
Aug 26, 2015
Recently updated to windows 10 I've tried a scannow to resolve another issue and I get a failure message with files being corrupted. I've tried a reset keeping my files but where to look next. Attached is my log file from the SFC and the DISM log really stuck currently.
DISM
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Scannow
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log.
Note that logging is currently not supported in offline servicing scenarios.
View 2 Replies
Aug 6, 2015
I'm currently running a PC on Windows 8.1. Of the course of it's use, I've had numerous problems with installing drivers and other software and have tried multiple times to clean install the OS from the disk. I've gotten to the point where I can't install most software I download for some reason and I can't get Windows update. Any type of sfc, dism /RestoreHealth, or other commands of the like always return unfixable errors. Would my problems be fixed by choosing the "clean install" option on the upgrade or would lingering system files cause me trouble down the road? If the latter is true, is there a way to use my upgrade on a new SSD I plan to buy?
View 1 Replies
Oct 25, 2015
Earlier today while playing Dying Light, my PC randomly blue-screened with the error "page fault in nonpaged area cpuz136_x64.sys" - After running a malware scan, nothing was found. After that I cleaned my registry with CCleaner. I haven't played Dying Light since then, but a few minutes ago I decided to run sfc /scannow - and It came up with a few files that were corrupt.
CBS.log:
Spoiler
2015-10-25 17:05:02, Info CBS Session: 30478193_851218210 initialized by client WindowsUpdateAgent, external staging directory: (null)
2015-10-25 17:05:02, Info CBS Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]
2015-10-25 17:05:02, Info CBS Failed to OpenPackage using worker session [HRESULT = 0x800f0805]
2015-10-25 17:05:02, Info CBS Session: 30478193_851228178 initialized by client WindowsUpdateAgent, external staging directory: (null)
[code]...
View 1 Replies
Nov 1, 2015
I have run SFC /SCANNOW and a large number of files have been found to be corrupted in Windows 10, and cannot be repaired by SFC. The CBS log is too large to attach, but I have extracted a list of all corrupt files attached.
After looking at similar posts, I downloaded SFCFIX.exe by Sysnative and ran that in an elevated command prompt, but the message I got was that source file could not be found. I have also run SFC in safe mode and also run DISM, but neither solves my problem, and the corrupt files persist.
CBS Extract.txt 27.04KB
View 3 Replies
Nov 7, 2015
I went into the CBS log as stated by the cmd, and these were the only things I could find that were not fixed.
View 3 Replies
Mar 27, 2016
Does SFC /Scannow really work? It always finds corrupt files in all of my systems regardless of the age of the OS install. Out of curiosity, I installed a pristine Windows 10 Pro on a clean, formatted, erased and empty(?) hard drive with no apps installed on a spare laptop . Ran SFC /Scannow and it reported corrupt files.
View 2 Replies
Aug 19, 2015
I've received 5 files from 5 sources, both Excel and Word. Every time I try to open one I get an error message "File is corrupt and can't be opened." I can work on my own files, but not downloads.
I tried the Windows 10 "workarounds" but these didn't work. I've tried to download using both Firefox and Edge, no difference.
View 1 Replies
Aug 3, 2015
I ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.
I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.
I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).
View 2 Replies
Dec 19, 2015
As the title says, the start menu wasn't opening so I ran SFC /scannow that found corrupt files but was unable to fix some of them. I then ran RestoreHealth but I got a message saying, "Source file cannot be found". I restart, Start Menu works again but still have corrupt files after an SFC scan. I recently did a clean install of Windows 10 after some non-related issues. CBS log is attached. I'm having trouble determining the problem from the log file.
View 4 Replies
Sep 3, 2015
I thought one uploads some files to their One Drive and then they can be accessed via other computers that they login into, why in the heck is One Drive downloading the files to each of my computers, we are talking 14GB of music I uploaded, it is taking forever and it is slowly down my computers and network, I don't care to have access to the files offline on my other computers, it in a way completely destroys the whole concept of files in a cloud.
Is there a way to turn off downloading of One Drive files to every computer that tries to access them, if not, that's it, I am completely done with all this junk and will then politely tell all upper Microsoft officals to go play in traffic, yet just another bone head concept.
View 1 Replies
Jan 9, 2016
I keep getting blue screens randomly with different messages, including KERNEL_INPAGE_ERROR, CRITICAL_PROCESS_DIED, and more. It doesn't seem to be associated with any particular app or thing that I do. This morning, I woke up to find that is BSODed in the middle of the night for apparently no reason.
I have tried SFC /SCANNOW (corrupt files can't be fixed), DISM restore_health, reinstalling Windows, check disk... You name it.
View 5 Replies
Dec 8, 2015
After scannow, i have : Windows resource protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log windirlogsCBSCBS.log.....
what should I do with this ?
View 3 Replies
Oct 20, 2015
I've got a LAN in my home/office with 5 machines now running Win 10 and I've not been able to transfer files between them due to "permission problems". These were all running Win 7 and sharing files with no problems but now I'm blocked. I've made every "advanced" change I can think of to networking and sharing screens and to firewall screens. The machines can see each other in File Explorer but "access denied" on transferring anything but vanilla homegroup folders. Need to get some insights on "permissions".
View 7 Replies
Jan 16, 2016
Response following sfc scan, windows resource protection found corrupt files, but was unable to fix some of them. I have the CBS log, but don't understand any of it.. I looked at an article that said replace files with a new copy, and I didn't understand that!
Attached Files
sfcdetails.txt 222.12KB
dism.log 348.56KB
View 3 Replies
Dec 22, 2015
Due to corrupt windows files my pc is unable to start. i am able to go into the bios, but after that it will freeze on the windows logo during start up. i have made a usb windows 10 installer and tried to start the pc up using that as my hard drive (went into bios and changed it to use that as my hard drive) but it still freezes on the same screen. I even unplugged my hdd and booted up but the same thing happens so I don't believe the problem is with my hd.
View 1 Replies
Nov 11, 2015
I've upgraded to 10 and now am confused regarding how to continue my backup/restore from Win 7. When I access control panel, it refers back to Windows 7. I have no problems with reformatting my backup drive and starting with Windows 10. Is there a Win 10 Bu/restore program? How should I proceed?
View 2 Replies
Feb 2, 2016
i want to upgrade to windows 10 pc, so do i have to transfer my existing files on C:/ and D:/ Drives or is it going delete every files from my pc while upgrading process?
View 1 Replies
Feb 10, 2016
I recently upgraded to Windows 10 because there are a handful of upcoming games that I am interested in that are only available from the Windows store (Gears of War, Killer Instinct, and Quantum Break), and I also want to take advantage of dx12 when games start to utilize it. I've read that some people have noticed a minor dip in fps after upgrading, but my experience was so bad I had no choice but to revert back to Windows 7 Ultimate.
Examples:
Rise of the Tomb Raider- Windows 7-max fps-62, min fps-43. Windows 10-max fps-44, min fps-31
Just Cause 3 Windows 7-max fps-54, min fps-30. Windows 10-a consistent 30 fps.
Project Cars Windows 7-max fps-118, min fps-88. Windows 10- max fps 88, min fps-73.
Mad Max Windows 7-max fps-111, min fps-88. Windows 10- a consistent 60 fps.
As you can see, these represent more than just a "slight drop" in framerate which I was willing to accept.
My PC :
i7 4790k 4 ghz cpu
gtx 980 ti x 2 SLI
32 gb ddr3
Asus Extreme Motherboard.
View 5 Replies
Sep 16, 2015
I wanna upgrade my Windows 7 PC directly using the Media Creation Tool, keeping the personal files only. Is it possible to specify which folders to keep?
At minimum, I would like to remove the 'AppData' folder to remove old cache and program files, but I'm still not sure if this is a good idea. The only folder I want to keep intact is my very large 'Dropbox' folder.
I considered choosing the "Nothing" option, except I don't want to re-download my entire Dropbox and put unnecessary stress on this 7yr old hard drive.
View 5 Replies
Oct 15, 2015
I was using Windows 8.1 then upgraded to Windows 10, but all of my personal files has deleted and I tried best of recovery programs and they're not worked for me. So, if I roll back to my previous version of Windows, does my personal files recoverd?
View 5 Replies
Jan 25, 2016
I had music files on my laptop which was running windows 7, but when I upgraded to windows 10 I can no longer find them and the available space is not now large enough to put the music back from an external drive, which leads me to think that these files are still somewhere on my hard drive.
View 6 Replies
Jul 31, 2015
I have fear that my files may get dissappear if i upgrade to windows 10 from windows 7. Is it so?
View 1 Replies
