SFC And DISM Error When Trying To Fix Corrupt Windows Files
Aug 3, 2015
I ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.
I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.
I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).
View 2 Replies
Similar Messages:
Aug 26, 2015
Recently updated to windows 10 I've tried a scannow to resolve another issue and I get a failure message with files being corrupted. I've tried a reset keeping my files but where to look next. Attached is my log file from the SFC and the DISM log really stuck currently.
DISM
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Scannow
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log.
Note that logging is currently not supported in offline servicing scenarios.
View 2 Replies
Aug 29, 2015
I just upgraded to Win 10 from Win 7.
I get Error 0x800f081f when run DISM.exe and it states the source file can't be found. When I run SFC scannow I get nine files that can't be repaired.
View 14 Replies
Jan 9, 2016
I keep getting blue screens randomly with different messages, including KERNEL_INPAGE_ERROR, CRITICAL_PROCESS_DIED, and more. It doesn't seem to be associated with any particular app or thing that I do. This morning, I woke up to find that is BSODed in the middle of the night for apparently no reason.
I have tried SFC /SCANNOW (corrupt files can't be fixed), DISM restore_health, reinstalling Windows, check disk... You name it.
View 5 Replies
Aug 2, 2015
I have been trying to fix my windows 10 corrupted files but I have been unabled to recover it. I tried every possible way of recovering using DISM commands, but to no avail. I tried also the sfc /scannow but as usual this command hardly ever fixes issues regarding corrupted files. I have tried using dism in several ways by specifying the location and the install.esd file from my usb flashdrive windows copy and even tried the health commands on powershell..still wont work. The first command I tried and for all of them I get the same error message, which looks like this:
C:WINDOWSsystem32>DISM.exe /Online /Cleanup-image /Restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see [URL] .....
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
I have heard people saying that I need to refresh my pc as a last solution and I don't want that since I have all my settings and programs migrated from the upgrade...
I have been reading on the web that there is a way of specifying the packages missing via command and then download them manually..
[URL]
View 6 Replies
Dec 8, 2015
After scannow, i have : Windows resource protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log windirlogsCBSCBS.log.....
what should I do with this ?
View 3 Replies
Jan 16, 2016
Response following sfc scan, windows resource protection found corrupt files, but was unable to fix some of them. I have the CBS log, but don't understand any of it.. I looked at an article that said replace files with a new copy, and I didn't understand that!
Attached Files
sfcdetails.txt 222.12KB
dism.log 348.56KB
View 3 Replies
Nov 12, 2015
I upgraded my Toshiba laptop automatically from 8.1 to 10 when the software came out (months ago) - have had no issues with it. Then I was using my laptop it flashed blue and turned off. It now comes up with with recovery - your pc/device needs to be repaired (see image) - I'm able to access the recovery settings - have tried refresh, system restore, automatic repair, nothing works and seems to get worse. I have a lot of personal files/photos that haven't been backed up for about a month and want to save them! I've downloaded the Windows 10 iso to a usb - but have only get semi regular access to a Mac so unsure if it's bootable.
View 3 Replies
Aug 11, 2015
So far, things have been ok with my Windows 10 update. Today I tried to look for updates, as I think this is the regular Patch Tuesday. However, it takes a long time, then gives me the error in the title. Using the update fixer doesn't work, I just get the "Service Registry is Missing or Corrupt". What would be causing that?
I'm also getting a problem with task host not wanting to allow shutdown, what's the deal there?
View 14 Replies
Nov 16, 2015
I can't run the command "dism /online /cleanup-image /restorehealth". Every time returns the error 0x800f081f.
View 4 Replies
Dec 22, 2015
Due to corrupt windows files my pc is unable to start. i am able to go into the bios, but after that it will freeze on the windows logo during start up. i have made a usb windows 10 installer and tried to start the pc up using that as my hard drive (went into bios and changed it to use that as my hard drive) but it still freezes on the same screen. I even unplugged my hdd and booted up but the same thing happens so I don't believe the problem is with my hd.
View 1 Replies
Aug 10, 2015
After Installing Windows 10, I encountered some problems. So, I tried to fix with dism.exe, but in vain.
Here's my SFC log : [URL] ....
View 3 Replies
Nov 9, 2015
I recently updated to Windows 10 (from Windows 7) and I feel there is something wrong with the performance of my ASUS Zenbook.
I run DISM and I got the following error message:
1. DISM /Online /Cleanup-Image /RestoreHealthDISM /Online /Cleanup-Image /RestoreHealth
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
So I run the check again with an ISO image of Windows mounted in E, but I got the same error message.
2. C:WINDOWSsystem32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:E:SourcesInstall.wim:1 /LimitAccess
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Here is the log file [URL] ....
View 5 Replies
Dec 24, 2015
I've been trying to use DISM /Online /Cleanup-Image /Restorehealth on my Windows 10 Home, but it keeps telling me that it does not support servicing Windows PE with the /Online option. Of course I'm not running WinPE 10.
View 9 Replies
Aug 15, 2015
I had upgrade to windows 10 from windows 7. I'm having problems with my directories. I have ran sfc & dism several times, below are the latest log files.
1. sfc /scannow - found file corruption, log file attached.
2. dism /online /cleanup-image /restorehealth - get 0x800f081f error, log file attached.
3. SFCFix.exe - no error found, log file attached.
cbslog.txt 3.79MB
dismlog.txt 447.82KB
SFCFix.txt 926bytes
View 8 Replies
Oct 25, 2015
Earlier today while playing Dying Light, my PC randomly blue-screened with the error "page fault in nonpaged area cpuz136_x64.sys" - After running a malware scan, nothing was found. After that I cleaned my registry with CCleaner. I haven't played Dying Light since then, but a few minutes ago I decided to run sfc /scannow - and It came up with a few files that were corrupt.
CBS.log:
Spoiler
2015-10-25 17:05:02, Info CBS Session: 30478193_851218210 initialized by client WindowsUpdateAgent, external staging directory: (null)
2015-10-25 17:05:02, Info CBS Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]
2015-10-25 17:05:02, Info CBS Failed to OpenPackage using worker session [HRESULT = 0x800f0805]
2015-10-25 17:05:02, Info CBS Session: 30478193_851228178 initialized by client WindowsUpdateAgent, external staging directory: (null)
[code]...
View 1 Replies
Jan 15, 2016
After almost every update, if I run sfc it reports corrupt files. Sometimes it cures them, sometimes I have to run dism, and this time neither work.
View 1 Replies
Nov 1, 2015
I have run SFC /SCANNOW and a large number of files have been found to be corrupted in Windows 10, and cannot be repaired by SFC. The CBS log is too large to attach, but I have extracted a list of all corrupt files attached.
After looking at similar posts, I downloaded SFCFIX.exe by Sysnative and ran that in an elevated command prompt, but the message I got was that source file could not be found. I have also run SFC in safe mode and also run DISM, but neither solves my problem, and the corrupt files persist.
CBS Extract.txt 27.04KB
View 3 Replies
Nov 7, 2015
I went into the CBS log as stated by the cmd, and these were the only things I could find that were not fixed.
View 3 Replies
Mar 27, 2016
Does SFC /Scannow really work? It always finds corrupt files in all of my systems regardless of the age of the OS install. Out of curiosity, I installed a pristine Windows 10 Pro on a clean, formatted, erased and empty(?) hard drive with no apps installed on a spare laptop . Ran SFC /Scannow and it reported corrupt files.
View 2 Replies
Aug 19, 2015
I've received 5 files from 5 sources, both Excel and Word. Every time I try to open one I get an error message "File is corrupt and can't be opened." I can work on my own files, but not downloads.
I tried the Windows 10 "workarounds" but these didn't work. I've tried to download using both Firefox and Edge, no difference.
View 1 Replies
Dec 19, 2015
As the title says, the start menu wasn't opening so I ran SFC /scannow that found corrupt files but was unable to fix some of them. I then ran RestoreHealth but I got a message saying, "Source file cannot be found". I restart, Start Menu works again but still have corrupt files after an SFC scan. I recently did a clean install of Windows 10 after some non-related issues. CBS log is attached. I'm having trouble determining the problem from the log file.
View 4 Replies
Sep 4, 2015
I ran sfc /scannow in an admin command prompt, however when it completes I receive this message:
"Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For
example C:WindowsLogsCBSCBS.log. Note that logging is currently not
supported in offline servicing scenarios."
I think that it may be somehow related to a few errors happening on my laptop--such as live tiles not working, and the inability to use some apps without crashes.
View 9 Replies
Nov 15, 2015
can some of you do an sfc /scannow and check your results with the November update installed? I always do this when i finish installations, and on 3 computers and 4 installations on them, 2 on one computer just to be sure i am getting corrupt files and struggling with my anger to not go back to windows 7 and get rid of all win 10 problems and MS ignorance. here is my results, many corrupted files in the log.. but is long so i don't post it...
Microsoft Windows [Version 10.0.10586](c) 2016 Microsoft Corporation. All rights reserved.
C:WINDOWSsystem32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log. Note that logging is currently not supported in offline servicing scenarios.
View 9 Replies
Feb 3, 2016
I just completed a clean install of Windows 10 Pro...all was going fine, but I wanted to run both scf and DISM...
If SFC was not able to repair some or all of the files there are a few options including a repair install from the OS dvd, and DISM (win 8 & UP)
DISM
If you are on win 8 and up you can (and should) run DISM if SFC found errors it could not fix
From an DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:elevated command prompt*
Type DISM /Online /Cleanup-Image /RestoreHealth . (please note the space after "dism", & "online" & "image")
If the repair is successful you may want to re-run SFC just to check.
[URL]
Have never had this issue before...but I can't seem to be able to direct DISM elevated command to a .iso file:
To run a system file check (SFC)
Go to start
Type CMD
Right click and run as Administrator
(called an elevated command prompt)
If you want to verify and repair the OS type sfc /scannow (note the space between sfc and "/")
If you just want to check (verify only) the OS type sfc /verifyonly (no changes will be made using verify only)
If you get the error message "cannot find source files"you need to have an ISO file mounted and need to specify where it is located with the below command
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:* Where "X" is the drive letter where the ISO is located.* SourcesInstall.wim:1 /LimitAccessSimply change the "X" to the correct drive letter
If you do not have an ISO you can make one.* The instructions are here
*You may have to run this up to 3 times to fix all the problems
When you have finished it will say one of three things
Windows did not find any integrity violations (a good thing)
Windows Resource Protection found corrupt files and repaired them (a good thing)
Windows Resource Protection found corrupt files but was unable to fix some (or all) of them (not a good thing)* If you get this message run DISM as described below..
I also have the DISM log file which I would be more then happy to upload:
View 9 Replies
Nov 13, 2015
just wanted to know what should one do if one gets the error and how does one troubleshoot it properly?
I looked up the log on my system but it's just a really big lump of text.
View 5 Replies
