When I initially installed Win10, it logged in with lightning speed (from the lock screen). After the update last weekend it takes longer to log in than it did with Win 7. or 8. How to speed up login time?
I'm running Version 1511 (OS Build 10586.3), 64 bit
I've really had it with Windows 10 now. The latest upgrade made my computer slow to a crawl, and disabled my ability to change the features on my Logitech mouse. The mouse now moves 1:1, so that I must move it 18" to get from one side of the screen to the other. The Logitech website claims the mouse is for Windows 7, not 10, so I must buy a new mouse? It worked fine before this last upgrade.
I would really like to go back to Windows 7, but my restore disks don't seem to work. Perhaps buying Windows 7 disks has become worth it.
Microsoft has shown their incompetence with their latest upgrade. We used to run a program to optimize compiled code to make it faster. That concept must be unknown to Microsoft.
I have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.
View 4 RepliesI am running Windows 10 Pro x64 that I installed as a full version (not from the free update, I purchased the full edition from Microsoft).Whenever I get a new OS I like to do a clean install so I used the Microsoft Media Creation Tool which I downloaded from this page. I used the Media Creation Tool to install the OS (wiped and created new partitions, installed the OS, etc.).
Now with this nightmare update they just released (Version 1511) I am having SO many issues. I would like to do another fresh install of this new version.If I use the Media Creation Tool again to create an USB installer will it contain this latest version (i.e. I won't have to go through the whole update process again)? Or does the Media Creation Tool only create a USB installer that contains the "base" operating system which will required updates all over again?If not, how can i create an installer for Version 1511 so that I can avoid the pain of updating?
I want to download an ISO for my friends computer. But all he is eligible for is Windows 10 home edition. Will the ISO that I download on my Windows 10 Pro work for his?
View 2 RepliesI have a new HP Envy 17t with Windows 10 64 bit. I have been installing various bits of software that I need to have. However, with some applications I get a strange error pop up, first a window telling me that the application is from an unknown source then, when I click OK, to continue, another window pops up, this one:
This has happened twice in the last 24 hours. Once when I tried to install a windows application so that I can root my Lenovo android tablet and then again when I wanted to install a media converter app.
I have the latest versions of both applications, I made sure they both were made for Windows 10 64 bit, but Windows 10 won't install them.
Have Windows 10 Pro 1511 10586.17 installed but want to make the windows borders bit wider as I do not like the ultra narrow ones.
I have changed borderwidth setting in registry and have also done so with the paddedborderwidth setting but regardless of what I do to that setting, after reboot the border stays the same.
So we now have got a new stable channel for Firefox thats v41.0.
I wanted to know what all tweaks could be done to this version Firefox to achieve best performance in Firefox.
I ask this because many of the old tweaks and parameters are deprecated in the newer version.
Using Windows ADK 10 v1511, how do I create a CD of the Windows PE latest version for the imaging, recovery and system maintenance?
View 6 RepliesI am running windows 10 and have the latest version of iTunes on my PC. Whenever i connect my iPhone 6 and sync however, the syncing process reaches step 3 (Preparing to copy items), a small window pops up saying "iTunes has stopped working" and under this it says "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
View 1 RepliesFor those people who CLEAN installed Win 10 using the Media Creation Tool, will it automatically update to Threshold-2 (version 1511 Build 10586.36) through Windows Update once installation had been completed? Or does that have to downloaded separately?
And what is the "KB" Number for version 1511 Threshold-2?
Yesterday I updated my PC from Windows build 10240 to Windows 1511, but after that I can't connect to WiFi.
My wireless adapter (which is built-in the PC) doesn't find any routers...
When I try to search the solution with the Windows tool, for some minutes it finds the routers again, but if I try to connect to someone, after few seconds it disconnect automatically.
I tried to reinstall the drivers, but nothing changed..
This morning after windows installed these updates my startup time increased significantly. I've had fast startup enabled. It stays on the welcome screen for at least 10 seconds
View 1 RepliesEver since the 1511 update last week, my SP3 display adapter crashes all the time. For example, if I'm using Windows Live Movie Maker, it will crash after only a few seconds of playback, then I have to close the app and reopen it, so I can get another 30 seconds of work done if I am lucky. If I'm using Blender or Repetier Host, it does better - lasts minutes instead of seconds, and doesn't always crash in those apps, but it does occasionally.
When I try to print to my 3D printer, it crashes sometimes, wasting plastic. I can get around that by doing the print from SD, but sometimes when it is something small, it's just easier to print from the host. Having increased problems (I used to get it occasionally, but not often) since updating to Win10 version 1511 last week?
I just updated my media center to version 1511 of windows 10. Via wifi, downloaded and installed ok i thought. But have found i cannot see any wireless networks. Normally about 7 up in my area.
I've tried uninstalled the device and installing it again.
I've tried checking for newer drivers, but isn't any.
I've tried resetting these in command prompt (admin) net sch advfirewall, int ip, int ipv6, winsock and rebooted afterwards.
I've tried plugging the usb wifi adapter into a different usb port.
I've tried restarting the Router. Mobile phone picks up wifi in the same room.
I have a Surface 3 Pro with 2 external monitors hooked up using StarTech USB VGA adapters. Since the update, my mouse does not show up on my remote Windows Server 2008 R2 VM's when the Remote Desktop window is on one of the external monitors (works on the Surface Screen). The cursor is there, just cannot see it.
View 2 RepliesI recently did a reset on my Windows 10 laptop and it reset to version 10240. I am not being prompted to update to the latest version via Windows Update. How do I trigger the update to send TH2?
View 9 RepliesAfter installing the early January updates, I can no longer mount/linkto/attach my two NAS drives. They are connected through the same switch that my PC is on. I have updated the NAS firmware with reboot, and restarted the switch.
The Advanced Sharing Settings are set to "ON".
NB the volumes are mountable from my Mac under Yosemite.
My computer (a 2 in 1 HP) has been frozen over night at 40% during the latest update. What can I do?
View 2 RepliesI'm in a lurch on 10162. I haven't received an email to update to 66, and windows is telling I'm up to date. My friend got 10166 installed, and he's having an issue with resolutions, so I'm trying to install now.
View 1 RepliesAfter the latest update yesterday of win10, I was able to connect to the internet. But once my laptop was shut down, I've been unable to connect since. Rebooted wireless remote and double checked all of the connections. Defender took over as my firewall from Advast. I've been able to shut off Defender but am still unable to connect to the net. In my wanderings, I did come across "report" that information was being sent but nothing going past some unknown firewall. As far as I know there are only 2; defender and Advast.
View 5 RepliesThe latest update changed a lot of my settings, like my mouse sensitivity, along with resetting my background to its default image and resetting my task bar to default. My biggest issue is that it deleted all my pictures in the "Pictures" folder. if they put them in the cloud? Or am I just fucked and have to go down to the head developers house and chuck eggs at it.
View 5 RepliesSo after having numerous issues with my ASUS VivoTab Smart upgrading to Windows 10 (Sound issues, display driver issues, losing my Recovery Drive, etc) I finally got everything fixed and my tablet was finally running as wonderfully as it did on Windows 8.1..... For about a week.
And then this latest build for W10 comes out. I downloaded it and then attempted to install it
The system restarts to do the update with the circular progress bar but then gets stuck at 40%. I have had this problem on three different PC's in the past and all I did was power them off, boot up again, and then it would finish off the update with no further issues.
But that didn't happen this time. I powered off my Tablet and then started it up again. Instead of carrying on, W10 decides to cancel the whole update and roll me back to am earlier version of W10.
I thought I would try again and this time wait longer. Maybe I was impatient. Went through the process again, rebooted, started the update install and then stuck at 40% yet again. I figured I would just plug my tablet in and leave it while I slept surly it would finish by the time I woke up. Nope it was still at 40%
Powered it down because I couldn't do anything else, but it decided to roll back again. What's worse is that it seemed to have rolled back to a version of W10 prior to when I got everything fixed mentioned above. So now not only am I stuck with a dud upgrade that keeps trying to install after a period of time, but I have to fix all my previous issues again. How to resolve this update freeze?
The update gets somewhere around 75-80%, but then it says "restoring previous version of Windows." When I load up Windows 8.1 again, I get this error.
View 10 RepliesOK so I received the update on my clean install of win 10 on my split Intel NVME SSD. Just went to do a Macrium image backup and discovered that the update has created an extra partition on my drive. Although small it is stealing space from my second partition that I save the backups to. I also have some extra files on C: as shown.
To regain space what files can I delete? Can I restore the extra partition without damaging windows. Do I need to include the extra small partition with C: for a Macrium backup to be able to restore if anything gets screwed? I was expecting the update to just update the C:/ drive.
after applying the latest cumulative updates IE11 is now broken on my system (W10 pro X-64)..Often the Main (home page) of a site works but as soon as you link to other links in the site garbled text often appears.Here's an example from BBC website. Main news page opens but link to a story and One can partly fix by pressing F12 and setting IE compatibility to IE10 or IE9.
View 4 Replies