Updates :: Fails To Update To Version 1511 / Always Gets Stuck
Jan 3, 2016
I have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.
View 4 Replies
Similar Messages:
Dec 18, 2015
At one time, I had Windows 2013 on my desktop computer. At some point I upgraded to Office 2016 and uninstalled Office 2013. However, every day for weeks now, Windows Update has tried (unsuccessfully) to install the following:
Security Update for Microsoft Office 2013 (KB2956151) 64-Bit Edition
Update for Microsoft Lync 2013 (KB2956174) 64-Bit Edition
Update for Microsoft Office 2013 (KB2899522) 64-Bit Edition
Update for Microsoft Office 2013 (KB2881001) 64-Bit Edition
Security Update for Microsoft Lync 2013 (KB2881013) 64-Bit Edition
Service Pack 1 for Microsoft Office 2013 (KB2850036) 64-Bit Edition
I don't know if other updates are being blocked because these can't be installed. Plus, there appears no way to tell Windows Update NOT to try to install these again, as previous versions of Windows had.
View 5 Replies
Nov 19, 2015
When I initially installed Win10, it logged in with lightning speed (from the lock screen). After the update last weekend it takes longer to log in than it did with Win 7. or 8. How to speed up login time?
I'm running Version 1511 (OS Build 10586.3), 64 bit
View 9 Replies
Aug 6, 2015
My MSi laptop is stuck in the aptio setup utility and if i turn my laptop off or try to exit, it will return to the same screen. It has been like this since i updated it to windows 10.
View 2 Replies
Nov 15, 2015
I am running Windows 10 Pro x64 that I installed as a full version (not from the free update, I purchased the full edition from Microsoft).Whenever I get a new OS I like to do a clean install so I used the Microsoft Media Creation Tool which I downloaded from this page. I used the Media Creation Tool to install the OS (wiped and created new partitions, installed the OS, etc.).
Now with this nightmare update they just released (Version 1511) I am having SO many issues. I would like to do another fresh install of this new version.If I use the Media Creation Tool again to create an USB installer will it contain this latest version (i.e. I won't have to go through the whole update process again)? Or does the Media Creation Tool only create a USB installer that contains the "base" operating system which will required updates all over again?If not, how can i create an installer for Version 1511 so that I can avoid the pain of updating?
View 6 Replies
Nov 15, 2015
windows update is stuck for months on 25%, is this problem known? or is there a way to reset it?
View 1 Replies
Jan 11, 2016
For those people who CLEAN installed Win 10 using the Media Creation Tool, will it automatically update to Threshold-2 (version 1511 Build 10586.36) through Windows Update once installation had been completed? Or does that have to downloaded separately?
And what is the "KB" Number for version 1511 Threshold-2?
View 6 Replies
Sep 7, 2015
Windows Update stuck at 9%
View 9 Replies
Nov 1, 2015
I am having problems installing Windows 10 updates...... again.
This update is dated 29.10.2015 and consists of 2 updates.
KB 3105210 states "waiting for download" and KB 3106932 states "waiting for installation" It has been stuck on this for several hours and my attempts to use the repair tools have failed to resolve the problem.
View 9 Replies
Sep 14, 2015
So far no real issue's to report running Windows 10 I really love it but here is my issue. Windows update has been stuck at 45% for the last 3 hour's and usually my updates go pretty quick. I've tried rebooting my system to see if the updates will finish installing but then it goes right back to 45% and stay's there.
View 5 Replies
Feb 10, 2016
the update fails to proceed beyond 58% and this has been going on for the last 1 week. The update seems to be Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3124262). Is their a way to get past this, that is resume the download or just restart the whole thing from zero.
View 7 Replies
Feb 10, 2016
I have been using win 10 for quite a long time and am happy with it. This evening when I was opening up a word document it behaved strangely . I could shut it down but after that everything stopped working. Ctrl alt delete wont respond. I had to shut down the computer using the Power button. When I restarted the computer . It immediately went into update mode screen with the usual configuring windows and warning about not shutting down the computer .The screen is orange with circulating dots. ( first time I see an orange screen , its usually blue) .At the beginning there was a short indication of % like about 35% but now only circulating dots . Nothing else works . Its already been running for 1/2 hour or so. I will leave it overnight to see whether I can get to the log in screen.
What to do if I cant get to the log in screen ? Without log in screen I cant get to system restore? Is there a way to boot into recovery mode? I do have a Macrium image and a Macrium recovery flash drive. Will windows recognize this thumb drive on boot or do I have to boot into Bios first to change order of boot .
Alternatively can make and use win 10 recovery flash drive from another window 10 machine?
View 3 Replies
Dec 27, 2015
I'm on Win 10 (build 10240). I hadn't been getting updates for a while so did some troubleshooting and started to receive the updates yesterday, including the major November update 1511
But the upgrade didn't complete. It went to the booting black screen with a circle and number in the middle and progressed up to a certain point but then rolled back the changes. This happened twice and now when I check for updates, it says device is up to date and won't even show the 1511 update.
View 6 Replies
Nov 16, 2015
Yesterday I updated my PC from Windows build 10240 to Windows 1511, but after that I can't connect to WiFi.
My wireless adapter (which is built-in the PC) doesn't find any routers...
When I try to search the solution with the Windows tool, for some minutes it finds the routers again, but if I try to connect to someone, after few seconds it disconnect automatically.
I tried to reinstall the drivers, but nothing changed..
View 3 Replies
Nov 22, 2015
Ever since the 1511 update last week, my SP3 display adapter crashes all the time. For example, if I'm using Windows Live Movie Maker, it will crash after only a few seconds of playback, then I have to close the app and reopen it, so I can get another 30 seconds of work done if I am lucky. If I'm using Blender or Repetier Host, it does better - lasts minutes instead of seconds, and doesn't always crash in those apps, but it does occasionally.
When I try to print to my 3D printer, it crashes sometimes, wasting plastic. I can get around that by doing the print from SD, but sometimes when it is something small, it's just easier to print from the host. Having increased problems (I used to get it occasionally, but not often) since updating to Win10 version 1511 last week?
View 6 Replies
Nov 29, 2015
I just updated my media center to version 1511 of windows 10. Via wifi, downloaded and installed ok i thought. But have found i cannot see any wireless networks. Normally about 7 up in my area.
I've tried uninstalled the device and installing it again.
I've tried checking for newer drivers, but isn't any.
I've tried resetting these in command prompt (admin) net sch advfirewall, int ip, int ipv6, winsock and rebooted afterwards.
I've tried plugging the usb wifi adapter into a different usb port.
I've tried restarting the Router. Mobile phone picks up wifi in the same room.
View 1 Replies
Nov 17, 2015
I have a Surface 3 Pro with 2 external monitors hooked up using StarTech USB VGA adapters. Since the update, my mouse does not show up on my remote Windows Server 2008 R2 VM's when the Remote Desktop window is on one of the external monitors (works on the Surface Screen). The cursor is there, just cannot see it.
View 2 Replies
Sep 17, 2015
During the week i had the windows 10 upgrade install onto my Toshiba Satellite laptop that was running Windows 7. Windows 10 did open but then crashed as it was booting up stuck in an error reboot loop. So i tried to restore the previous version of windows and it has been stuck in the boot cycle ever since. It will run a continuous loop restarting the process every 10 mins. I can't get it ti get out of this reboot loop. What to try and get my laptop up and running.
View 2 Replies
Apr 14, 2016
I know there are some tools out there that will show the key but I really need to know the version of the OS in the UEFI BIOS.
View 9 Replies
Aug 1, 2015
I am unable to connect to any WiFi connection. I've tried many adapters, different USB ports (2.0/3.0). I've even tried using the WPS button on my adapter and router. After entering my WEP key, it gets stuck on Verifying and Connecting.
I am currently using my laptop's Wifi, through a LAN shared connection. I am also able to use a Tether from my phone's WiFi connection.
I feel that something went wrong during the installation, as I had to make two attempts, and after many hours of finally getting it to work, many applications are laggy/unresponsive. I am, for example, currently unable to open up the App Store or Settings - they open for about 10-20 seconds and then close. I have a fairly high-end system spec, so that is not the problem. Forgot to mention, I have the most recent Intel LAN drivers from my motherboard's website.
View 1 Replies
Aug 14, 2015
I am trying to install the .net 3.5 update for my Windows 10 Pro rig. I tried the usual way (enabling) with no luck: the system sits on searching for file and never goes anywhere. (I let it search overnight with no luck). I tried the method suggested HERE with no luck either (it sits there telling me the image version but never starts the "Enabling Features" process. I've let it sit there for 30 minutes with no success.
I am trying to do the second step via a Windows 10 USB install, not a DVD. I didn't bother trying to create an ISO since I didn't think that would matter. In either case, I feel really stuck. I am unable to run a few legacy games because of this stupid .net 3.5 issue. It's really frustrating.
View 9 Replies
Aug 13, 2015
The update gets somewhere around 75-80%, but then it says "restoring previous version of Windows." When I load up Windows 8.1 again, I get this error.
View 10 Replies
Sep 1, 2015
I guess the title says what my problem is. So, I finaly got to install KB3081444 without any issues, and now, this update is doing infinite restarts on Windows Update. I tried:
1. Installing from offline downloaded installer - the same error code.
2. Did DISM, both commands failed.
3. SFC says no issues.
Windows Update files will be shortly.
View 9 Replies
Nov 13, 2015
I attempted to update my desktop with Windows 10 x64 build 10240 to 10586 using the ISO. The update gets as far as the second section and stalls at 32% - I left it for hours with no change. Fortunately powering off the system resulted in 10240 being restored. After the system booted to the desktop the error 0x1900101-0x30018 was given as the reason for the update failure. I'm not sure how to proceed. I've been able to install all other updates since the release of 10240 and the system has no issues with hardware or drivers as far as I can tell. I also have a laptop running identical security software and it updated to 10586 without incident.
View 2 Replies
Feb 10, 2016
I installed an update today which says in Microsoft's notes about it that it patches Edge among other things. Yet, the version displayed in Settings in Edge is the same as it was before this install. Is it supposed to stay the same?
View 3 Replies
Sep 14, 2015
3 times ive tried to upgrade my windows 7 pro to windows 10 pro and 3 times it has failed at 57% ( installing drivers and software middle portion). results in bluescreen then reboots says trying to recover install and blue screen again then it goes back to windows 7 and boots right up.If I try to clean install to windows 10 it says key not valid ( using my win 7 pro key)
Ive tried to install from the little icon on the bottom of my screen, from a usb 3.0 made with windows 10 usb maker tool, and a usb 2.0 from the same tool ALL FAIL!ive got an 8350 1tb ssd, 16gb ram 7970 gpu fully loaded system top end from 2012 and it wont go!
View 1 Replies
