Updates :: 1511 Appeared Then Disappeared?
Dec 27, 2015
I'm on Win 10 (build 10240). I hadn't been getting updates for a while so did some troubleshooting and started to receive the updates yesterday, including the major November update 1511
But the upgrade didn't complete. It went to the booting black screen with a circle and number in the middle and progressed up to a certain point but then rolled back the changes. This happened twice and now when I check for updates, it says device is up to date and won't even show the 1511 update.
View 6 Replies
Similar Messages:
Jan 3, 2016
I have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.
View 4 Replies
Aug 17, 2015
After I did a free upgrade from 7 to 10 on visiting Control PanelAll Control Panel ItemsSystem I used to see Under Windows activation at the bottom not only that Windows is activated but also an Icon confirming that the Windows was genuine.
Now for some mysterious reason the genuineness Icon has disappeared. I wonder why this has happened.
View 3 Replies
Oct 20, 2015
Since the last update i now have a new icon appearing in the sys tray (bottom left hand corner of screen) It is a yellow padlock clicking on it (both left and right click) bring up no information but as soon as it is clicked it disappears and doesn't reappear until I boot up again. I have googled it but all I have found is that it could be something to do with event logs being full up.
View 17 Replies
Jul 29, 2015
My Windows 10 was running perfectly well for one full week. Then this morning I noticed it installed some update and after reboot the screen went black and the cursor appeared.
I tried every thing but nothing worked. I cannot even access the troubleshooting, bios, repair, etc... Nothing.
After it reboots I noticed that if I type my password blindly the HDD LED starts to blink wildly as in loading my start up programs etc....
But nothing else happens when I try Ctrl-alt-del or win-r and type explorer.exe or whatever I can think of.
View 6 Replies
Nov 13, 2015
The November update hasn't appeared in Windows Update yet on my Surface 3 (Windows 10 Home).
View 3 Replies
Feb 20, 2016
This "accuweather" widget randomly appeared on the far right of my task bar and I can't get rid of it!
Right clicking it gives me the option to either change my location or quit. "Quit" gets rid of it temporarily, but will be back the next time I log on. I have searched my computer for any files associated with it but can't find any?!
Is this a normal Win10 feature that came with a recent update or malware?
View 5 Replies
Aug 19, 2015
After resetting my Microsoft windows 10, an error - inaccessible boot device appeared
View 4 Replies
Oct 18, 2015
I've developed an odd problem with my Windows 10 PC. On the login screen, an Administrator account has appeared out of the blue. It has no password and is just there. I cannot seem to get rid of through the normal user accounts section of the settings. How to get rid of this?
View 3 Replies
Dec 5, 2015
I have a Lenovo IdeaPad S10-3, it was upgraded from Windows 7 Starter to Windows 10 early august. Working find everything until updating to version 1511 in november, after rebooting with the new version the WiFi appears disconnected, it only shows airplane mode and I can only connect to internet by cable. I have tried changing drivers, disconnecting and reconnecting wireless, even going back to former Windows 10 version, etc. but no way. WiFi appears with a red cross!. Why WiFi worked so fine in the former version and why it´s disconnected in the new version?.
View 14 Replies
Nov 16, 2015
Yesterday I updated my PC from Windows build 10240 to Windows 1511, but after that I can't connect to WiFi.
My wireless adapter (which is built-in the PC) doesn't find any routers...
When I try to search the solution with the Windows tool, for some minutes it finds the routers again, but if I try to connect to someone, after few seconds it disconnect automatically.
I tried to reinstall the drivers, but nothing changed..
View 3 Replies
Sep 15, 2015
In my Windows 10 Mail, a cross-in-circle symbol suddenly appeared?
What is this means and how to solve and remove this?
View 3 Replies
Nov 27, 2015
Once again, Windows 10 pro 32bit upgrade failed when it reached 71% installed.
I have an ASUS H81M-PLUS MB with intel core i7 processor.
As on previous attempts, a small window appeared with the caption "Microsoft Visual C++ Runtime Library" Below the caption was a small red circle with a cross in it and below that an uncaptioned button
Clicking on the button resulted in a message "Restoring previous Version of Windows" It then proceeded to do just that.
Having read other posts on this thread, for this attempt I disconnected all USB3 peripherals so that isn't the problem.
View 11 Replies
Nov 22, 2015
Ever since the 1511 update last week, my SP3 display adapter crashes all the time. For example, if I'm using Windows Live Movie Maker, it will crash after only a few seconds of playback, then I have to close the app and reopen it, so I can get another 30 seconds of work done if I am lucky. If I'm using Blender or Repetier Host, it does better - lasts minutes instead of seconds, and doesn't always crash in those apps, but it does occasionally.
When I try to print to my 3D printer, it crashes sometimes, wasting plastic. I can get around that by doing the print from SD, but sometimes when it is something small, it's just easier to print from the host. Having increased problems (I used to get it occasionally, but not often) since updating to Win10 version 1511 last week?
View 6 Replies
Nov 19, 2015
When I initially installed Win10, it logged in with lightning speed (from the lock screen). After the update last weekend it takes longer to log in than it did with Win 7. or 8. How to speed up login time?
I'm running Version 1511 (OS Build 10586.3), 64 bit
View 9 Replies
Dec 4, 2015
As per title.
Since the 1511 update I can't remove file properties from any video file.
It always says that the file is open in Windows Explorer...
View 9 Replies
Nov 29, 2015
I just updated my media center to version 1511 of windows 10. Via wifi, downloaded and installed ok i thought. But have found i cannot see any wireless networks. Normally about 7 up in my area.
I've tried uninstalled the device and installing it again.
I've tried checking for newer drivers, but isn't any.
I've tried resetting these in command prompt (admin) net sch advfirewall, int ip, int ipv6, winsock and rebooted afterwards.
I've tried plugging the usb wifi adapter into a different usb port.
I've tried restarting the Router. Mobile phone picks up wifi in the same room.
View 1 Replies
Dec 7, 2015
When you start Windows 10 keyboard does not work since the upgrade to 1511
View 1 Replies
Nov 17, 2015
I have a Surface 3 Pro with 2 external monitors hooked up using StarTech USB VGA adapters. Since the update, my mouse does not show up on my remote Windows Server 2008 R2 VM's when the Remote Desktop window is on one of the external monitors (works on the Surface Screen). The cursor is there, just cannot see it.
View 2 Replies
Nov 15, 2015
I am running Windows 10 Pro x64 that I installed as a full version (not from the free update, I purchased the full edition from Microsoft).Whenever I get a new OS I like to do a clean install so I used the Microsoft Media Creation Tool which I downloaded from this page. I used the Media Creation Tool to install the OS (wiped and created new partitions, installed the OS, etc.).
Now with this nightmare update they just released (Version 1511) I am having SO many issues. I would like to do another fresh install of this new version.If I use the Media Creation Tool again to create an USB installer will it contain this latest version (i.e. I won't have to go through the whole update process again)? Or does the Media Creation Tool only create a USB installer that contains the "base" operating system which will required updates all over again?If not, how can i create an installer for Version 1511 so that I can avoid the pain of updating?
View 6 Replies
Nov 14, 2015
I notice an unpleasant GUI-level change that appears after the upgrade to 1511. The issue seem to exist on all machines after 1511 upgrade.
Firstly, Google Chrome shortcut pinned to Start Menu now appears on dark gray tile, instead of the regular "color accent" tile. Is this a bug or a feature?
Secondly, an attempt to pin the Chrome-generated GMail shortcut to Start Menu immedaitely loses its dedicated icon and gets a regular Chrome icon instead. E.g. before the upgrade it was possible to pin the GMail link to the Start Menu and it would retain its GMail icon. After the upgrade it is no longer possible to keep the icon.
View 4 Replies
Dec 21, 2015
I was having the common problem updating to KB3122947, where it would simply fail to install. As far as I know, there were a few ways to resolve this, and I found the top answer here worked. Ever since, I've not been getting Mail notifications in the action centre, besides the fact that no settings have changed and I've checked both in the Windows settings and in Mail settings that they are enabled to notify.
View 1 Replies
Apr 21, 2015
A desktop icon suddenly appeared on my desktop.. If I delete it, the whole desktop is also deleted... The desktop folder on the drive, does not contain that icon...
View 7 Replies
Jan 11, 2016
For those people who CLEAN installed Win 10 using the Media Creation Tool, will it automatically update to Threshold-2 (version 1511 Build 10586.36) through Windows Update once installation had been completed? Or does that have to downloaded separately?
And what is the "KB" Number for version 1511 Threshold-2?
View 6 Replies
Jan 16, 2016
Not sure if it's just me, but for some reason, since the Jan 12 patch Tuesday, I no longer see definition updates for Windows Defender on Windows Update's "View your update history" page.
I, for one, am happy about this change, since those "Definition Update for Windows Defender - KB2267602" were clogging up the update history page.
View 9 Replies
Feb 10, 2016
Auto Updates have 'broken' my HP Network AIO Printer's driver. Repeatedly. On all four networked PCs/Laptops in my household. Requires uninstallation then re-installation of printer driver to regain network printer access/functionality. I and my family are just so impressed </sarcasm>Indeed so impressed that my daughter just bought a MacBook. It behaves perfectly.Seriously considering going over to the dark side as it appears that 'it just works' isn't just a marketing slogan.
View 6 Replies
