I am trying to filter a recordset with a variable q. The field in the table associated with the record set is of data type Date/time. I assigned data types String and Date to q but both cases generates the error message " Data type mismatched in expression".
View RepliesHello All,
I changed one of my queries to generate the period off a date in a field. The simple expression is:
Period: Month([Act Del])
It give me the number of the month...however now I am getting this error. I assume that the number of the month is not matching with the other data types....but I need to know who to fix it.
any ideas?
Thanks
I'm trying to hash two scripts I've found into 1 functioning filter, however I'm still relatively new to vba and can't figure out how to get this working.
I'm trying to use Allen Browne's Search Criteria:
with another snippete of code I found here:
Code:
'Purpose: This module illustrates how to create a search form, _
where the user can enter as many or few criteria as they wish, _
and results are shown one per line.
[Code]....
It's the date part I'm having trouble with, the rest of the search criteria work fine without the date, but I can't get it working when I try to modify and merge the date sections of each code.
Also I'm using a listbox for the "Yesterday";"Last 4 days";"Last 9 days" and not a combo box.
I have a variable (dtDueDate as Date) showing as 6/28/2013. I want to append a time value to it (dtMaxTime as Date) which is 5:00 PM so dtDueDate reads 6/28/2013 05:00:00 PM. I have been going in circles trying to figure this out. My goal is to append this date to a table field which has a datetime (General Date).
View 6 Replies View RelatedI am trying to pass a recordset to a sub procedure as follows
Code:
Private Sub AddNewSProdStatus(rsTemp As DAO.Recordset)
rsSProdStatus.AddNew
rsSProdStatus![ProdID] = Me.Recordset![ProdStatusID]
rsSProdStatus![TitleID] = Me.Recordset![Title]
rsSProdStatus![ProdDealType] = 1
[Code] ....
However, whenever I call the procedure as below
Code:
AddNewSProdStatus (rsCSales)
I get a type mismatch error.
All Recordsets are declared as DAO and contain data...
I am currently developing a calendar and am trying to open a recordset based off of a SQL string. When I deleted the Where part of the SQL statement, the code ran fine. So I am pretty sure that the problem lies within the Where part of the code. I use this code to filter my query based on txtTaskTypeID but if the value is null then the query is suppose to return all values. I keep getting Run-time error"3061: Too few parameters. Expected 1".
Code:
strSQL = "SELECT tbl1CalendarEntries.ID, tbl1CalendarEntries.Title, tbl1CalendarEntries.StartDate, tbl1CalendarEntries.StartTime, " _
& "tbl1CalendarEntries.EndDate, tbl1CalendarEntries.EndTime, tbl1CalendarEntries.TaskTypeID " _
& "FROM tbl1CalendarEntries " _
& "WHERE (((tbl1CalendarEntries.TaskTypeID)" _
& " Like IIf(IsNull([forms]![frmProductionPlanning]![txtTaskTypeID])=True,""*"",[forms]![frmProductionPlanning]![txtTaskTypeID]))) "
& "ORDER BY tbl1CalendarEntries.Title;"
I'm using the OnLoad event of a form I've got as a placeholder to load a report from the onclick event of a button on my continuous form, and loading a chkbox into the code as a string variable.For some reason, when the DB automates the procedure, I get a 'Type mismatch' error appear, but when I step through the code using F8 it works.
when I press F5 after the code has stopped I get the 'Type mismatch' error.The chkbox contains a value of '-1', and I've used debug.print to return the TypeName and VarType values, which were 'String' and '8' (which I took to mean 'String') respectively.
There are other variables being declared in the code, and I commented out the whole lot and put each one back in individually before running the code as a process of elimination, and the checkbox was the one that threw up the error again.
Code:
Dim Prod1stSend as String
Prod1stSend = me.chkProd1stSend
We are using the code to determine whether our clients have been contacted by us before, as this will decide which report is opened. I've tried setting the variable as Boolea and Variant too, and both of those still throw up the same error.
I have an Access 2010 database where we have a SQL Linked Table with a column that is nVARCHAR(20) Not Null data type. We have created a form for data entry. Currently when the user tries to erase a value or choose not to define a value we get the following error.
"You tried to assign the Null value to a variable that is not a Variant data type."
This field should accept a blank value "" as the user may not want to set the value. We do not have control over the DB schema, so how can I work around this issue in access?
I have got like subform which I think is the tech term I use it to filter dates on field "date raised" and open's a report depend on date's entered in txtstartdate and txtenddate it works perfectly but I need to add some check boxes to check other field's are true/false ...
Code:
Private Sub cmdPreview_Click()
Dim strReport As String
Dim strDateField As String
Dim strWhere As String
Dim lngView As Long
[Code] ....
I need to add code to the text in red well I'm guessing
here goes with what I would like to add
job cancelled1 check box name field name= job cancelled
job on hold1 check box name field name = job on hold
void property1 check box name field name = void property
E.g. if I put date range in my date boxes and tick job cancelled show all record in that date range cancelled same with job on hold and void property
here some code I did but wont work as it not in the same strwhere above
Code:
if me[job cancelled1] = true then
strwhere = [job cancelled] = 1 'field name
else
strwhere [job cancelled] is null
end if
Some how need to add the strwhere to the code above ...
I am trying to apply a filter on a subform but i get "Type mismatch" and i dont know why below is the code.
Basically when they select a line on one subform it filters another from that selection is it somthing to do with the dates?
Code:
Dim MyProd As String
Dim ReqDate As Date
MyProd = Me.ProductCode
ReqDate = Me.RequestDate
Forms!FrmReplenishments.FrmMasterReplenDetail.Form.Filter = "[ProductCode]= '" & MyProd & "'" And "[DeliveryDate]= #" & ReqDate & "#"
Forms!FrmReplenishments.FrmMasterReplenDetail.Form.FilterOn = True
I have Main Table with a count and I have a query from it. But when I looked at it, the data doesn't match. What may seems to be the problem? It is all Grouped By.
View 1 Replies View RelatedI want to add a string as year to a date.
Somehow it doesn't work out. It should extract all records with Valid_from = 01.01.2013 and valid_to = 31.12.2013. The Year assignment works.
Code:
Public Sub BEN()
Dim strSQL As String
Dim t As Date, s As Date
DoCmd.SetWarnings False
Year = Right(pricedate, 4)
t = 1 / 1 / " & Year & "
s = 12 / 31 / " & Year & "
strSQL = "SELECT TRANSFER_PRICES.* INTO [TEMP] " & _
" FROM TRANSFER_PRICES " & _
" Where [Valid_from] = " & Format(t, "#mm/dd/yyyy#") & _
" AND [Valid_to] = " & Format(s, "#mm/dd/yyyy#")
DoCmd.RunSQL strSQL
DoCmd.SetWarnings True
End Sub
I need to run a query for a particular time frame. The only problem is that the CurrentDate field in the table has its data type set to Text.
I thought I could do something like this but it didn't work:
WHERE cdate(myTable.CurrentDate) >= #01/01/2004#
Isn't there a way to "convert" this field so that it behaves as a date field when the query runs?
Thanks,
crhodus
I am creating an ASP page that uses a database with a field labeled 'Date' of data type Text.
I would like the records within a date range.
I tried using the following query:
"SELECT * FROM Project WHERE Date BETWEEN ' " + strBeginDate + " ' AND ' " + strEndDate + " ' "
I was partially successful.
The database contains data from 1/1/03 to 12/31/04.
When the following range is entered: 04/10/03 - 04/21/03, the results returned are 04/10/03 - 04/21/03 AND 04/10/04 - 04/20/04.
Any suggestions on how to approach this problem?
Thanks
Hello all - One of my 3 users' computers keeps coming up with an error when I try to enter the following command in the "Validation Rule" field of the table design view:
>=#1/1/1998# And <=Date()
Some investigative work showed that it's erroring on this clause: "<=Date()". Any idea why it would error on her pc and not the other 2 pc's? Her pc is old, but we're all using Access 2002. The error says: "The function you entered can't be used in this expression." Any thoughts would be helpful. Thanks much.
Dan
I'm trying to create a query based on another query. However, my WHERE statement is causing a data type mismatch for a date. My code is:
Code:
SELECT id, status, updated, [previous renewal]
FROM qrynext renewal
WHERE status = "active" and [previous renewal] = date()
If I remove the " and [previous renewal] = date()" it works just fine. But even setting up [previous renewal] to equal #7/17/14# or "07/17/14" or anything else I've tried won't work. The field that it's based on is definitely a date field, but I don't know why it would cause a data type mismatch.
thos is f.i. a json data sting :
{"vip_kaarten":"0","reg_kaarten":"0","extra_vip_ka arten":"0","bedrag_extra_vip_kaarten":"0.00","extr a_reg_kaarten":"0","bedrag_extra_reg_kaarten":"0.0 0","vrjr_kaarten":"2","extra_vrjr_kaarten":"0","be drag_extra_vrjr_kaarten":"0.00","website_link_spon sorpagina":"1","website_banner":"","social_extra_m ededelingen":""}
How can i convert this to readle data?First string is the field name, second the value.
I would like to convert 2013.11.13 which is a string into a date. This is what i have so far but it's not working.
2013 year
11 month
13 day of week
Dim strDate As String, dteConvertedDate As Date
strDate = 2013.11.13
dteConvertedDate = CDate(Mid$(strDate, 6, 2) & "/" & Left$(strDate, 4) & "/" & Right$(strDate, 8))
MsgBox (dteConvertedDate)
End Sub
I am trying to add 30 or 45 days to a certain date and insert that date in a table. The field is declared as datetime on the SQLServer and has been tried with all date formats, and none, on the access side.The problem I am encountering is that the date is being inserted as 12:00:00 in the table, no date is being stored.When I print out the SQL statement to the immediate window, the date in question shows the correct date.
Code:
Dim a As Date
Dim b As Date
a = DateAdd("d", 45, Me.DateOfExit)
b = DateAdd("d", 30, Me.DateOfExit)
strSQL = "INSERT INTO MyTable ( No, Name,DueDate, OriginatedBy, ID, Status) " & vbCrLf & _
"VALUES (" & Me.No & ",'" & Me.Name & "', " & b & ", '" & Me.Facilitator & "', " & Me.ID & ", '" & "Required" & "');"
I have tried adding the date add code to the SQL string, but that produced the same result.
I need to use VBA to get a string which is essentially just a month and year (so date, not including day)
Would Prefer it to be 04/15 as opposed to April-15, as the number is easier to sort than the word (how to sort month names in numerical order as opposed to alphabetical id).
So that I assume i could do by =format(now(), mm/yy) (though havent actually tested it)
However to add to the complexity id also need to add a month to it, so for instance todays date is 08/04/15, id need the string to read "05/15"
or if the date was 10/12/15 id need the string to read "01/16"
hi
I'm writing a pretty simple application to search an Access db. The query is:
Me.cmdSelectEvents.CommandText = "SELECT eventDetails.id, eventDetails.subject, " & _
"eventDetails.title, eventDetails.trainers, eventDetails.type, eventDetails.summary, " & _
"eventDetails.url, eventDates.date " & _
"FROM eventDates INNER JOIN eventDetails ON eventDates.id = eventDetails.id " & _
"WHERE (((eventDetails.subject)=@subject) AND ((eventDetails.type)=@type) AND ((eventDates.date)<@date));"
The parameters @subject and @type are simply strings selected from dropdown values.
The @date parameter is set by using a dropdown to select a timeframe to search in, specifically "Within 1 month", "Within 3 months", "Within 6 months". These options have the values "1", "3" and "6".
When the form is submitted the value of the selected option is passed into the following routine:
Dim valSelectedDate AsInteger
Dim dateParameter AsDate
valSelectedDate = ddlDate.SelectedValue
dateParameter = DateAdd("m", valSelectedDate, (Date.Now))
cmdSelectEvents.Parameters("@date").Value = dateParameter
When I run the debugger the right date value seems to be being passed to the sql query (i.e. if the user selects "within 6 months" and today's date is 5th May 2005, then #05/11/2005# is passed as the parameter) but I get the error data type mismatch. The column eventDates.date is a Date/Time column.
Can anyone help?
I`m currently having the problem to export data from an SQL server into a table. I managed to open a recordset but I`m incapable of adding the recordset to an existing table. I found similar threads but I am still not able to generate functioning code.
Code:
Function fDAOServerRecordset()
Dim db As DAO.Database
Dim dblcl As DAO.Database
Dim rssql As DAO.Recordset
[code]....
I wrote a VBA code to get the field value of a csv file, then use it to update the database table. I paste some of my code below
Dim objConn As New ADODB.Connection
Dim objRs As New ADODB.Recordset
Dim objUpdate As ADODB.Connection
objConn.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & theFolderName & ";Extended Properties='text;HDR=Yes;FMT=Delimited'"
[Code] ....
1. The target of this code is to set the [Section] value in the table
2. The [Section] value is at the 3rd column inside the csv file
3. By using the UPDATE query, it map the [Section] value to the corresponding [Program] and [Course] in the table
This code did the job. But the problem is the string of the [Section] value is like "2-22-01". But after update to the table, the value become "2/22/2001".
The value is a string text, not date. How can I prevent this happen ?
I just attached 2 files, 1 mdb and 1 txt (change the extension to csv before test).
Hello guys,
Does anybode has any idea, of how to do that ? I can do it very easy in VB.NET, or C#, but in Access I give up.
So, I have to take data from the form , and send it to Sub.
With data type of String , I have no any problem, use Nz funciton, end everything, goes well.
But with Date and Integer, I can not find solution.
So :
Date
Dim PensionerFromDate as Date
PensionerFromDate = IIf(IsNull(Me.txtPDPensionerFromDate) = True, ????, Me.txtPDPensionerFromDate)
(instead of ???? i tried everything .. dbNull, vbEmpty, vbNull,sqldatenull, and somtimes it works but int the table stores "12/301899")
Integer
Dim CompanyID as integer
CompanyID = IIf(Me.cboCompany.Column(0) = 0, ????? , Me.cboCompany.Column(0))
I tried here instead of ????, tu insert "", ",," , " " , Cint("") itd. itd. . but nothing works.
Has anybody any idea ?
100 x thanks in advance
I have a table with a field with names set to text data type and i want to change it to number data type but when i do it in design view the data get lost. I want to know if there is a way to convert the data in the field as number type and keep the data in the field.
View 7 Replies View RelatedI'm using MS access and Excel 2000. I have an Excel spreadsheet that contained 8 columns, the first column has all cell format as Number, the rest of the column is set as custom date format of 'dd/mm/yyyy'. When I create a linked table in MS Access, the data types does not matched my excel spreadsheet columns, the 'Number' data type is a double and I want a Long Integer in Access, and the custom date format become text datatype but I wanted a DateTime datatype. Is there any work around this? Seems like it is a common problem.
Your prompt response is greatly appreciated!
Thanks in advance!
Martina