How To Hide URL When Display Reports In Reporting Services
Jul 26, 2007
Hi ,
How can I hide the URL information when I open a report, some with parameters and some do not have
parameters. Is there anyway or properties in RS that I can set to have it hide all the important information,
like datasource, credentials, parameters, and display the report like a aspx page instead?
Or does this need to have special programming to make this happen? and if so, what do I need to do?
thanks very much
View 1 Replies
ADVERTISEMENT
Jul 15, 2015
In SSRS 2014 std (on a win 2012 server) the report controls display incorrectly in IE11. The save and several other features display on multiple lines instead of one line unless you are in capability mode.Also works fine on SSRS 2014 entr  on win 2012 server.
View 7 Replies
View Related
Apr 30, 2015
I would like to display a portion of report where there is data or no data
There is data subreport  display  Â
   Product Name Latex Gloves Â
   Product ID   Â
xxxx5678
 There NO data in the subReport
Â
  Product Name             Â
  Product ID  Â
View 3 Replies
View Related
Nov 5, 2007
Hello SQL Server Experts, Data Analysts, and Report Writers et al:
re: Reporting Options with SQL Server
I wanted to propose an offshoot to the pryor thread:
Would anyone take a stab at comparing Access Reports, Crystal Reports,
Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format?
I guess this is a far as capabilites, ease of use, limitations, and especially formatting
or presentation of the end report product?
Thank you to all, and I hope this is a beneficial discussion to others.
Hal1490
Hal9000
View 4 Replies
View Related
May 8, 2015
I am creating a report with a Matrix and this report contain a collapse Matrix which it toggle from a certain field.
Now I am having two issue:First issue is that when I set visibility to hide and that the matrix can be toggle by a field is leaving a very unaesthetic  space between rows.
The second problem is that when I toggle the field I would like another part of the report to hide.
Does it exists anything that would allow me to define an expression I can use in the visibility that I Can use to make disappear this part of the report when the + has been toggle and make it appear back when the - has been toggle?
View 8 Replies
View Related
Jul 20, 2015
I have a Multivalue parameter with 4 available values and have 4 columns in the report that correspond to each of these values.I apply column visibility to each of the 4 columns with the following expression (the number changes for each column
=IIF(InStr("," & Join(Parameters!KPINAME.Value,",")& ",",",1,")>0),False,True)
What I want to do is that if I select a KPI and the Column value is NULL then to hide the row.Obviously if you select multiple KPIs and only 1 of the columns has null value then I wouldn't want the Row hidden.
View 5 Replies
View Related
May 16, 2015
How to hide page number based on tablix availability?
I would like to hide all page number once a specific tablix has data!!
View 8 Replies
View Related
Jan 4, 2011
When I hide a table based on an expression it leaves a blank space. How do you get rid of the blank space?
View 7 Replies
View Related
Oct 20, 2015
I have 2 reports in a single report
Report 1:Â This report has a tablix and a pie chart which displays member counts for genders.Dataset is written such that the gender names are always displayed in the tablix even when the count is Zero for Female and Male
Report 2:Â This report has a tablix and a pie chart which displays member counts for category Age.Dataset is written such that the age category names are always displayed in the tablix even when the count is Zero for age categories
Both Report 1 and Report 2 are place in separate rectangles and then these 2 rectangles are place in one single rectangle.Now I want to hide this main rectangle with an expression.
View 4 Replies
View Related
Oct 15, 2015
From Text Box Properties/Visibility/Show or Hide Based on an Expression, I have the following:
=iif(fields!Data.value is nothing or fields!Data.value ="", true, false)
I am trying to remove the first line from the CSV export file as shown here:
Here is the TBP view:
The expression I have does not hide the Name of the Text Box. Or, I could be in the wrong area.
View 2 Replies
View Related
Nov 3, 2015
I have a parameter "time frame" which contains two value- 6 months ,12 months an 18 months which shows data of 6 months , 12 months and 18 months.
In my ssrs report i have 18 columns :
jan|feb|mar|apr|may|jun|july|aug|sep|oct|nov|dec|jan|feb|mar|apr|my|jun
The first six months will be displayed in each case.
But when i choose 6 months i just want to display first six months only.when i choose 12 months  i want to be displayed first 12 months columns only and for 18 months all the columns,.
View 8 Replies
View Related
Oct 19, 2011
how should i hide pdf in export option in reportviewer
View 11 Replies
View Related
Sep 29, 2015
I have a group in my report that contains an empty footer row to get a better visibility. Because the row has a frame it should be hidden if its the last row on the page. How can I manage that?
View 4 Replies
View Related
Aug 2, 2015
I need to hide the address bar in the SSRS report pop-up using the JavaScript. I tried using below property
"&rc:Toolbar=False"
="javascript:void(window.open('https://dev/PWA/ProjectBICenter/_vti_bin/reportserver?https://dev/PWA/ProjectBICenter/Report Library/ProjectStatusReport.rdl&rv:Paramode=Hidden&rc:Toolbar=False&rv:HeaderArea=None&vuidProjectUID=Fields!ProjectUID.Value','_blank','location=no,toolbar=no,left=100,top=100,height=600,width=800'))"
What I am missing using this property?
View 6 Replies
View Related
Sep 10, 2015
I thought the built in expression Level() would show me be drill down level. I can't see to get that to work. I'd like to determine my drill down level so I can hide columns based on that.
View 2 Replies
View Related
Oct 19, 2015
I have 2 tables in my report, a multi value parameter (tp_title) is passed to the report. I am trying to hide the first tablix with this expression in the visiblity option of the tablix properties.
=IIF(Parameters!tp_Title.value = "Financial Years" or Parameters!tp_Title.value="ALL", False,True )
I get the error: The Hidden expression for the tablix ‘Tablix1’ contains an error: Overload resolution failed because no Public '=' can be called with these arguments:
   'Public Shared Operator =(a As String, b As String) As Boolean':
       Argument matching parameter 'a' cannot convert from 'Object()' to 'String'.
When I render the report. How the tablix can be made invisible based on the parameter?
View 6 Replies
View Related
Apr 23, 2015
Can we do the auto hide of parameter window in ssrs as soon as user select the input and click on view report and once the data comes, that parameter window should hide automatically.
View 3 Replies
View Related
Oct 25, 2015
I developed a rdlc report. I have a graph chart. Sometimes the value of a label can =0. If the value =0 I want to hide the labelname. However, I also have dummy values =0. This is so that I can have spaces between the bars. The dummy values labels isn't shown in the graph. This works great. I need to add to the expression that if the name of the label isn't dummy but the value =0 to hide the labelname.
The data from sql:

Expression in graph under chart data->category groups->category group properties->label:
=Microsoft.VisualBasic.Interaction.SWITCH(Fields!LabelName.Value = "aTotalForRetire", "Retirement", Fields!LabelName.Value = "cTotalForRelatives", "Relatives", Fields!LabelName.Value = "eTotalForDisability",
"Disability")
The result is below. I want to hide the label relatives as in this example the value=0. It will not always be the case. How can I do that?
View 2 Replies
View Related
Aug 9, 2015
I am using the below expression for hidding the zero data labels in ssrs chart.=IIF(Fields!Name.Value=0,False,True). But this expression is working for some other charts. It is not wrking for only charts. I could not find the solution for that. How to hide the zero values.
View 4 Replies
View Related
Jun 16, 2015
I have a report with three subreport, i want to hide data of subreport while exporting reporting in to excel. I have used this function  (=IFF Globals! Render foramt.IsInteractive,False,True) but didnt work.
View 2 Replies
View Related
May 6, 2015
I have report which has 5 columns. User want to export report file in Excel format. when  exported report then by default 2 columns will be hidden in excel and user can unhide columns after export in excel.I did column hide on report level and show in result set in excel sheet by using Global render format.Â
View 4 Replies
View Related
Apr 24, 2015
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article:Â [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
View 5 Replies
View Related
Sep 13, 2010
I am using VS 2010 and the SSRS that came with it. I am sure its SSRS 2008. Anyway, I added a report file to the project, added an ObjectDataSource and connected this to SQLServer 2008, and display the dataset on the report. The report is using ScriptManager, ReportViewer1, and Report1.rdlc file. I preview the dataset and I have multiple row returned. The problem is I only have one row displayed on the report. Maybe I did a quick and dirty report? What setting of properties did I missed?
View 8 Replies
View Related
Sep 7, 2007
I have a file directory of tiff images that I need to display dynamically with reporting services. I receive the following error message: "The value of the MIMEType property for the image €˜image1€™ is €œimage/tiff€?, which is not a valid MIMEType." After looking it up sure enough tiff is not a valide type. Does anyone know of a way to display tiff images in reporting services.
Thanks,
Ross
View 8 Replies
View Related
May 8, 2015
I have a database that yield 50 different reason codes
=Fields!Reasons_Type.Value
Each reasons code yields a total
i.e.
Appeal 4
Loss 5
Won 0
How can I display all 50 rows of data regardless if there is a total value.
View 2 Replies
View Related
Mar 2, 2008
I have Successfully deployed the report in Report Server.
And i also successfully called it from Web application using VS 2005.
But the problem is,I am able to view only half of the report in Web Browser.It was Shrinked to Left side of the browser.
I am getting total report when i browse from Report Server URL directly.
Any body pls help me to solve this.
View 7 Replies
View Related
Mar 10, 2007
I have a report created in Business Intelligence Project.I want to trigger my report result. If it has no returned value, it creates error message displayed on the screen. How could I do this?
Any guidance please.
thanks
-Ron-
View 3 Replies
View Related
Apr 14, 2008
I have created a table and want to display a datset. One of the fields in the dataset is 'month' which I need displayed across the top of the report. The other information should make up the rows.
How do I get it to list the Month across the page rather than down?
View 7 Replies
View Related
Jul 16, 2015
I want a ssrs report with two tables adjacent,using same data set. I want to start row number/records in second table where rownumber of first table ends.and in second page first table should start where second table of first page ends.
View 10 Replies
View Related
Jun 11, 2007
Hi,
We have stored some chinese characters in SQL database with datatype as nvarchar, but they are displayed in RS as some weird characters.
like this: 耹±Ã¥€¢€ 耹±Ã§¾Å½Ã¨¸Ã¨€°Ã¥€¢€ Ã¥€¹„¢(耚¡)Ã¥€¦¬Ã¥¸Ã¥°Ã§£Ã¥Ë†€ Ã¥€¦¬Ã¥¸
When we code the asp pages, we put the following on each page to display the chinese characters properly.
<meta http-equiv="CONTENT-TYPE" content="TEXT/HTML; CHARSET=UTF-8">
So my question is what do I need to do in RS in order to show the chinese characters properly as well ?
Many thanks!
View 8 Replies
View Related
Mar 14, 2008
Hi all,
I have one problem to display report.
I have 6 fileds in my Dataset.I have to display 4 fileds in one row.
After that I have to display other 2 fields in next row.
Second row may have more than one record based on last field of the first Row.
How can i place my fields at the time of Design.
Example.
suppose x,y,z,p,s,t are fields
x y z p(1st row)
in this row values for x,y,z,p fileds
s t
xxxxxxxxxx xxxxxxxxx(2 records)
yyyyyyyyyy yyyyyyyyyy
x y z p
in this row values for x,y,z,p fileds
s t
xxxxxxxx xxxxxxxxxxx(1 Record)
x y z p
in this row values for x,y,z,p fileds
s t
xxxxxxxxxx xxxxxxxxx(3 Records)
yyyyyyyyyy yyyyyyyyyyy
zzzzzzzzzz zzzzzzzzzzz
How can i display this.
Thanks and Regards
View 7 Replies
View Related
Jun 1, 2015
I have a doubt ,while doing report, I have month column, I have passed 11 in  month parameter, but I want to display month column as NOV not 11.Â
View 2 Replies
View Related
Sep 3, 2015
I have a table that contains some data.Â
LabelName
LabelValue
TotalForRetire
10337
dummy1
0
TotalForRelatives
5850
dummy2
0
TotalForDisability
7337
TotalForOrange
23
I have a pie chart and a bar chart.
In the pie chart I want to plot only TotalForRetire and TotalForDisability and TotalForOrange
In the bar chart I want to plot only TotalForRetire,dummy1,TotalForRelatives.
Also, here I want the horizontal axis not to show the label  for dummy1 as the value is 0. How can i do that for each chart?
View 2 Replies
View Related
