Multiple Datasets In A Single Chart?
Aug 20, 2005
Is it possible to incorporate data from 2 datasets into a single chart? For example I have 1 set of data from 1 db which allows me to display datapoint "A" by week. I have a second dataset from another db which allows me to display datapoint "B" by week. I'd like to plot each of these separate datapoints on a single chart with the x axis being week and the y axis being a stacked bar chart incorporating both A and B values as individual data series. Further, assuming this is possible, is it then possible to have 1 series displayed as an area while the 2nd series is a column or line?
View 9 Replies
ADVERTISEMENT
Jan 18, 2008
Hi,
I need to display the datas in a table format. I have placed a table and now i need to use two different datasets for a single table. Those two different datasets are generated based on two different stored procedures. Those stored procedures retrieve data from two different sql tables. Can any one explain me how to use two different datasets for a single table. As far i have tried i was able to fetch only the first record of the other dataset. But i need to fetch all the records of both the dataset. Thanks in advance for any help.
Thanks,
Sangeethaa
View 11 Replies
View Related
Jan 31, 2007
Hi,
i have developed a report with sql reporting services 2005 which consists of two datasets in the same report.
Any performance issues it will cause?
Thanks,
Shanthi
View 14 Replies
View Related
Aug 22, 2006
Dear ppl,
I have got 2 datasets D1 & D2 in a Report. How can i differentiate between the fields of these two.
e.g. I got Name field in both the datasets. So when i do =Fields!Name.Value in a textbox the report gives me error
How can i tell the report from which dataset to pick up the field ??
Regards
Nabeel
View 9 Replies
View Related
Jun 21, 2015
I have two different dataset in one Report, Each Dataset result is binded to a different Table component.
When I export as Excel ,I am getting all this in One Excel sheet.
I need this in separate excel, as dataset1 in excel1 and dataset2 in excel2.
View 3 Replies
View Related
May 31, 2007
I have a report that I have created with multiple subreports and datasets. There should be a better solution so I am asking the question here.
The report should display like this:
Object
Object Title
Budget
Curr-Spent
Ytd-Spent
Ytd-Encum
Post-Ytd
Balance
% Remaining
4100
EMPLOYEES
$380.00
$250.93
$343.67
$0.00
$0.00
$61.33
15.94%
4102
EMPLOYEES - TEMPORARY
$149.00
$110.75
$139.70
$0.00
$0.00
$47.30
30.16%
4201
EMPLOYEE BENEFITS
$138.00
$73.16
$12.60
$0.00
$0.00
$32.40
25.28%
Each column represents another dataset.
Each column right now is a subreport so I can use the object as a parameter to the subreports dataset. Each column needs to have the object as a parameter.
Is there a way I can pass a field from the first dataset as a parameter for the next dataset without using subreports?
View 4 Replies
View Related
Mar 28, 2008
I have multiple different data regions on one report body. I need to be able to arrange the a few of the data regions so that they are grouped together and print together on same page. I've tried using a list around the data regions that I want to group together, but the list data region needs to have a data set specified and it only allows one to be specified.
Has anyone tackled this before?
View 5 Replies
View Related
Aug 29, 2006
I am needing to take data from one data set that consists of a list of parts and their stock information. Then I am needing to show any transactions that the individual parts may have had during the time that user defined through the filters.
This requires me to have two data sets since I can't do a join between the stocking information and the transactions due to the fact that it is very possible that every part won't have a transaction for each month of each year. Doing a left join still filters down the data too much so thus the need for two data sets.
I have these parameters:
Vendor, Year, Month, Type of request
Vendor and Type of Request is handled through StockInfoDataset. I then need to update the table showing 0 or transaction amount from TransactionDataset filtered by the ItemNumber and WarehouseCode that is in StockInfoDataset. Since it seems List and Table only allow one dataset in them, I am at a loss as to how I would go about doing this.
Explaining this is quite difficult in a forum post, but hopefully someone would be able to shine some light on possibly avenues to follow here....thank you in advance.
Josh
View 3 Replies
View Related
Apr 4, 2008
I have three datasets that are currently displaying data in three side-by-side-by-side tables. This gives the appearance of one large table were all rows match up nicely. Now, I need to somehow calculate the sum of those rows values across and display that value as a calculated sum at the end of each row. How can I access the values of each column from those three different tables in order to be able to add them together for each detail row. Or is this just a dream? Thanks in advance....Using SQL Server 2005. The backend queries that create those datasets are MDX and trying to manipulate those to get one dataset back will be a pain. That's why, I am hoping that there is a front end solution to this.
View 1 Replies
View Related
May 8, 2015
I am designing a bar chart in which five value comes .if all values comes then graph is working fine but my concern is when i have single value then in that case bar gets created on the middle of chart i want to generate the single bar on bottom of the chart.
View 5 Replies
View Related
Nov 17, 2014
I have 3 tables pointing to 3 different datasets on my report.
How Can I take the totals from Each Table(Dataset) and add them together for a Grand Total?
View 3 Replies
View Related
Nov 26, 2007
My company is implementing a multilingual solution for our application, so naturally the reports must follow. Every report I create has 2 datasets. It seems to me that the first dataset translates appropriately based on the browser's language setting, but the second dataset disregards the locale and just displays things in en-US. I've even created a sample report that accesses the exact same columns from the exact same view and dataset1 returns the correct language, but dataset2 returns en-US.
The report's language is set to =iif( User!Language = "fr-CA", "fr-CA", "en-US"), but I've also tried just setting it to = User!Language or leaving it at Default just to see if that would work.
Has anyone come across this before and been able to find a work-around?
Thanks!
mmat
View 2 Replies
View Related
Apr 15, 2008
Hello, I'm at a loss with this problem....
I have written many reports with multiple datasets but today I have something bizarre happening. I have three stored procedures (datasets) in this report. This is a rolling twelve month report that looks at three numbers (restraints, census, and percent of census) by month and year...pretty simple. The first data set is for the graph for all twelve months. The second and third data sets are broken out by MonthNum in matrix tables to show the first and then second six months in separate tables for displaying purposes...so that that they don't have to scroll far over to the right since I'm printing all the three values per month.
This should be no problem. What's happening is that when I refresh the report not all three datasets are displaying properly. Some times the data in the graph shows and some times it doesn't. Another odd thing is that in my matrix tables the restraint number and then percent values sometimes double or sometimes they are 0. What makes it even more strange is the census number is always there and is always accurate.
All the aggregates are calculated in the T-SQL stored procedure. So, all I'm doing in RS is displaying the values. It almost appears to be cycling through the datasets when I refresh the report. Other than the fact that the census value is always there.
I rebuilt the report with only the graph...no problem. Once I add another data set, every other time I refresh the report the graph has no data. I can't imagine what I'm missing as I've done this numerous times.
Has anyone come across anything like this?
Thanks!! Jamie
View 3 Replies
View Related
Mar 22, 2007
I have a report with two datasets, DS1 and DS2, which contain the same data fields, but with different values. Like so:
DS1 = sales
salesperson sale_number amount
John Smith 1 $100
John Smith 2 $105
Mary Jane 3 $98
John Smith 4 $275
Mary Jane 5 $92
DS2 = sales with price overrides
salesperson sale_number amount
John Smith 1 $100
Mary Jane 3 $98
Mary Jane 5 $92
Now what I want to do is see how the salespeople are doing. I can use either dataset and get great results independently:
Sales Results:
Salesperson Number of Sales Total Amount
John Smith 3 $480
Mary Jane 2 $190
or
Sales results with price overrides:
Salesperson NumSales with Over Total Amount
John Smith 1 $480
Mary Jane 2 $190
Now what I really want to do is a combo table like so:
Salesperson NumSales with Over Number of Sales %Overrides
John Smith 1 3 33.3%
Mary Jane 2 2 100%
I can not figure out how to do this. If I create a table that has DS1 as its datasource, I need to access DS2 for a count. So I try this for the NumSales with Over:
= count((Fields!sale_number.Value,"DS2"))
This just repeates the total number of sales in DS2, which is 3, for each line; not separating them out by salesperson.
If I try something fancier such as:
=count((Fields!sale_number.Value,"DS2", (Fields!Salesperson.Value,"DS2") like =(Fields!Salesperson.Value))
The report won't even run.
I want to do something along those lines. Does anyone have any ideas how to do this? I've considered subqueries to use salesperson as a filter, but the datasets are so large that the reports end up taking forever to run. I've tried using iif, but it doesn't seem to like using a field from a second dataset. I even tried to use the embedded VB code box to write a function, but then I couldn't pass the full array from the secondary dataset to the function (I could pass it from DS1, but not DS2).
I know this is incredibly simple, but this noob can't figure it out. If anyone has any suggestions I would deeply appreciate it.
Thank you,
cmk8895
View 1 Replies
View Related
May 8, 2008
Hey guys,
I am pretty new to reporting software and I was just wondering in reporting services 2005 when working with multiple datasets and data connection string in order to populate text boxes if the data is a number it is prefixed with SUM at the start of the expression and if it is text it is prefixed with FIRST even though it is just for one value.
I was wondering if this is normal or have I messed up somewhere?
Many thanks.
View 1 Replies
View Related
Jan 23, 2008
Hi,
I had a procedure which returns 5 result sets. Now i want to export 3 results sets in 1 excel sheet and the remaining 2 resultsets in another excel sheet. Can we do this in reporting services.
ThanksDinesh
View 6 Replies
View Related
Oct 4, 2007
Hello and thank you for the help in advance.
I know this has to be possible maybe I am just missing somthing.
I am creating a matrix report which will compare year by year quotes to orders The issue is quotes and orders each have their own dataset. I will be pivoting on JobType which is in both datasets and spelled the same. Is there a way to do this or will I have to figure out how to union the tables? If not possible why does it allow you to name the dataset in the expression?
Thanks, Leo
View 1 Replies
View Related
Jan 14, 2008
A report I am currently working on is a payslip report.
This report has multiple tables on the page, each linked to their own specific dataset.
Eg I have Taxable Allowances table linked to a dataset that returns information relating to any taxable allowances for an employee, then Non-Taxable allowances, Deductions and so on...
Taxable allowance dataset example
SELECT
TA.TaxableTrDesc,
TA.TaxableTrText,
TA.TaxableSubQty,
TA.TaxableTrRate,
TA.TaxableTrFact,
TA.TaxableSubTtl
FROM
Employee E
INNER JOIN TransCurrentMaster TCM ON E.EmployeeCode = TCM.EmployeeCode
CROSS APPLY udfReportTaxableAllowances(E.EmployeeCode, TCM.PaySequence, ) TA
WHERE
E.EmployeeCode IN (@EmployeeCodeParameter)
AND TCM.PaySequence IN (@PaySequenceParameter)
The report works fine when you select one employee.
Currently when you try to select more than one employee, all the employee results are displayed in the tables, for example, Taxable Allowance table contains all taxable allowances records for all employees on the one page...
I'm not sure how I can amend this report so that it is able to be run for multiple employee records...
Any ideas, thoughts, feedback would be much appreciated..
Cheers
View 4 Replies
View Related
Jun 17, 2015
I want to use multiple datasets in a table and wants to do the full outer join on the two datasets in the same table. For example, my two datasets are:
I want to display a ssrs table like:
Both the datasets are coming from different sources. So I cannot integrate them at sql query level.
View 4 Replies
View Related
Sep 27, 2015
My report has two data sets that hold inventory from two different departments.
ds_DeptA and ds_DeptB
I have a table, that pulls the DeptB status of DeptA record and displays it. This returns empty when the lookup fails to make a match, which is fine. Typically means DeptB does not have the record yet. I need to count these empty (null) feilds and populate it in a Text box outside of the table.
I just can't figure out the syntax with multiple datasets. I can't use the lookup expression as part of the count expression since the count expression is not contained in a table that has a dataset.
table: ds_DeptA
fields:
ID
Name
date_set_to_DeptB
<<Expr>> =Lookup(Fields!ID.Value,Fields!DeptA_ID.Value,Fields!DeptB_Status.Value, "ds_DeptB")
View 3 Replies
View Related
Mar 27, 2012
We have a report that was created in SSRS 2008 R2 that has 3 tables with different datasets that share a common ID that I want to use to group them.
If we run the report passing only a single value for the grouped parameter then the report works perfectly. What we need is for this report to allow multiple values to be selected for this parameter and for the report to run as if the user had selected each value one at a time and run the report with page breaks in between. Currently, when we pass multiple selected values for the grouping parameter the report displays all values for table 1, then all values for table 2, then all values for table three as below:
Table 1:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
....
Table 3:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
But we want it to render like this:
Table 1:
Detail rows for Group Param Value 1...
Table 2:
Detail rows for Group Param Value 1...
Table 3:
Detail rows for Group Param Value 1...
[code]....
The page breaks are needed so that when the report is exported to excel each individual report (by group param) will be on its own uniquely named tab.The report must export cleanly to excel and currently does for the single value passed.
View 5 Replies
View Related
Mar 3, 2008
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
View 8 Replies
View Related
Apr 21, 2015
I have a table with single row like below
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0 | Value1 | Value2 | Value3 | Value4 |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
_ _ _ _ _ _ _ _
Column1 | Value1
_ _ _ _ _ _ _ _
Column2 | Value2
_ _ _ _ _ _ _ _
Column3 | Value3
_ _ _ _ _ _ _ _
Column4 | Value4
_ _ _ _ _ _ _ _
View 6 Replies
View Related
Aug 22, 2007
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
View 1 Replies
View Related
Oct 3, 2014
I have a store procedure in MC400 which I can call from SSMS using the below command:
EXEC ('CALL GETENROLLMENT() ')At serverName
Now this command returns two data sets like:
HA HB HC HD HE
1112
112571ABC14
113574ABC16
114577ABC87
DADBDCDD
1115566VG02
1115566VG02
1115566VG02
I want to generate two different XML files from these two datasets.Is there any way this can be achieved in SSIS or t-sql ?
View 3 Replies
View Related
May 10, 2015
Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
View 4 Replies
View Related
Sep 3, 2014
How to insert single row/multiple rows into multiple tables by using single insert statement.
View 1 Replies
View Related
Sep 5, 2007
Friends, I would like to put employee name and type of leave on the y-axis and on the x-axis the date, so that users can select the date start and end and employee/employees and see the chart or leaves.
But how to do that?
My fields are: Name, LeaveDescription and Date.
The data with me is for each employee, for each date, leave codes are there.
View 4 Replies
View Related
Sep 10, 2007
Hi,
we have a requirement that, when we click on the multiple series bars in a SSRS chart, it should drill through that chart and the detail report should filter based on these x axis and y axis of the bars selected.
As far as my knowledge, we can drill through the chart by selecting single series bar at a time in SSRS. Is there any way to acheive this multiple drill through of a chart.
Thanks
Raghava
View 1 Replies
View Related
Apr 13, 2007
Hi, all experts here,
Thank you very much for your kind attention.
I have a question about how to have multiple chart options for a report? Like when I view a report, I want to see the report in different charts formats. It is possible in SQL Server 2005 Reporting Services (designer) to change from different chart options? Hope my question is clear for your advices.
Thank you very much in advance for your help and advices. And I am looking forward to hearing from you.
With best regards,
Yours sincerely,
View 7 Replies
View Related
Feb 7, 2007
Is there any way to create a chart using data fields from more that one query?
I tried to create two different datasets, but the chart has to be bound to only one dataset. So when I drop the data field from the second dataset onto the chart I get a SQL error.
I've also tried UNION ALL. Each of these queries is correct by itself, but UNION ALL combines GLBUDAMOUNT and GLTRXAMOUNT into one field. I need them to be two different fields so that I can do GLBUDAMOUNT VS GLTRXAMOUNT in the chart.
View 3 Replies
View Related
Jul 26, 2007
Hello and thanks in advance.
I was wondering if anyone has ever written a chart with multiple datasets.
I need to be able to show sales dollars inflow by order date on one line and on the other needs to be sales dollars delivered by delivery date. So the all sections Values, Category groups, and Series Groups in the chart will be from 2 different datasets.
I have tried but it will not allow aggreates in the series groups.
Any Ideas would be greatly appreciated.
Thanks, Leo
View 1 Replies
View Related
Jul 23, 2015
I'm using Reporting Services 2008 R2, version 10.50.2550.0, and Visual Studio 2008, version 9.0.30729.4462 QFE. Not sure if the SQL version matters, since I haven't gotten the report out of the development environment.I've read lots of messages, including URL.... that show you can have multiple data entries per row in a Range Bar Chart, simply by turning DrawSideBySide to False.My data set basically contains four pieces of data, LineNumber, Equipment, StartTime and EndTime. I have data like:
1, 'CLM1', 08:00, 08:30
1, 'CLM1', 09:00, 09:15
2, 'SS1', 08:05, 08:35
2, 'SS1', 09:05, 09:35
(I actually have a date with my datetime entries, but that should give you the idea.) My chart is set up with Values of EndTime and StartTime. If I set my chart up with only Equipment in the Category Groups entry, my chart will show CLM1 from 08:00-08:30, and SS1 from 08:05 to 08:35. No sign of the other entries per equipment, although I added a tablix to retrieve the same data and it all shows up.Changing DrawSideBySide between True, False and Auto has no effect on the data displayed on my chart. If I add StartTime in the Category Groups, I do show all the data, but one row for each piece of data, which isn't what the customer wants.From what I can tell from various sites, I'm set up right, but it just isn't working.
View 2 Replies
View Related
