I have problem here with sql task editor. i have a stored proceedure with 1 input value and 1 output value which needs to be updated in a variable.
stored proc - exec GetRDate ? , ? output
input value is set in a varaible.
I tried giving 1 input and 1 output in the parameter box and result set as fullresultset 1 value for variable -
" failed with the following error: "No disconnected record set is available for the specified SQL statement.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Get Retention Date
what should i give in the parameter and result set
This code works in the SQL task in dts packages but not in SQL task in SSIS. It would run the file but the problem is that when there is an error it doesn't raise the error in SQL task in SSIS. Anyone can provide me with a solution would be appreciated.
USE MASTER DECLARE @result int
EXEC @result = xp_cmdshell 'dtexec /f "D:File2.dtsx"' If (@result <> 0 ) BEGIN
This error is pretty persistent. I re-installed VS 2005 and SQL Server 2005 but did not help. Every time I try to open a Script Task editor it gives me the same error regardless of the project or package. DO I NEED TO REBUILD MY SYSTEM ?
===================================
Cannot show the editor for this task. (Microsoft Visual Studio)
===================================
Specified cast is not valid. (Microsoft.VisualBasic.Vsa.DT)
------------------------------ Program Location:
at Microsoft.VisualBasic.Vsa.Dt.VsaIDE.get_ExtensibilityObject() at Microsoft.SqlServer.VSAHosting.DesignTime.get_ExtensibilityObject() at Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptTaskUI.Dispose() at Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptTaskMainWnd.Dispose(Boolean disposing) at System.ComponentModel.Component.Dispose() at Microsoft.DataTransformationServices.Design.DtrPackageDesigner.DoDefaultActionForTask(TaskHost task)
Since applying July 2007 Microsoft patches it was noted that we were not able to open the editor for the Script Task component in an SSIS package. We received an error dialog with text similar to 'Engine failed with unknown error. (Microsoft.VisualBasic.Vsa.Dt).' All other solutions provided in the forum did not resolve our issue. It was noted somewhere else that the OLE32.dll seemed to have been affected. We reregistered this file using the command 'regsvr32.exe ole32.dll' and suddenly we were able to get into the editor. I don't know why this fixed the issue, but it did for us in our environment. Good luck!
I am using SSIS 2008 tool for developing ETL package. I get below error whenever I click on script task editor.Cannot show Visual Studio 2008 Tools for Applications editor. (Microsoft Visual Studio).
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. Â I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters. Â
I have a variable in SSIS that I want to access inside the Script Task. I assigned the variable in the ReadOnlyVariables in the Script Task property. How do I access it?
Can we include a Send Mail Task inside a transaction? We intend to callback a sent email in case there is an error in the subsequent task, if it is possible.
We are designing an ETL solution for a BI project using SSIS.
We need to load a dimension table from a source DB into the DW; inside the DW there are two tables for each source dimension table: a current dimension table and a storical dimension table.
The source table includes technical columns that indicate if each record was processed correctly by ETL procedures.
Each row in the source table can be a new record, or an exisisting one. If it's a new record, a corresponding new record should be inserted into the current dimension table of the DW; if it's an exisisting one, a new record should be inserted in the storical dimension table and the existing record in the current dimension table should be updated.
Furthermore for each record we need to update the source table with an error code. If the record was processed with succes the code is zero, otherwise it contains an error code.
I try to use a single data flow task, using the 'ole db command trasformation' task for managing update and 'ole db destination' task for managing insert.
The problem is that some insert and update should be executed inside a single transaction, for each record; for example if the source contains a new record I should insert the record in the current dimension table and update the source record with error code zero if every think goes fine.
There is some way to group task in the data flow pane in a single transaction ?
I've been looking around but haven't yet found the syntax for usage of global variables in an SQL Task.
I've set the global variable Id (see code below):
if (select field from table where id = @[User::id]) is null select top 1 1 as response from table else select top 1 0 as response from table
My objective with it is to set another global variable (@isNull). Supposably, when the selection returns null, I should set the variable to null, I did it by using the selections and mapping the response to that variable (is ther a better way to do so?).
When I try to execute this, it says the variable has not been defined. Here is the error:
Error: Must declare the variable '@'.
I've also tryed it withou the brackets and the User:: thing in the beggining, (@id directly) and here is the response:
Error: Must declare the variable '@id'.
How should I access the global variables in the SQL code? (BTW, I've checked the field in execution time and it is set to 23, the correct Id, so the block that preceedes this one is working properly)
Hi, I'm trying to loop thru a table and insert records into another table in ssis. So far I have been able to get the data using a execute sql task set up to store the full result set into a variable called data. I then drug a foreach loop container out and selected the foreach ADO enumerator and used my variable data as the ADO object source variable. I then set up a new variable under variable mappings with index 0 to get the collection values. How do I take that variable and update another table using another sql task inside the foreach loop container? Is this possible?
I'm reading over this thread: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1884062&SiteID=1
and I'm kinda lost as to what to do to strip out the dtd from an XML file I am downloading. I do NOT know XSLT and for that reason, I can't follow his logic.
My SSIS package downloads my XML file just fine, now I need to do a strip of the DTD line in my XML Task.
The person who provided the solution in the above post said to do this...
Code Snippet Operation Type: XSLT Source Type: Variable Source: Variable's name containing the xml text Save Operation Result: True DestinationType: Variable OverwriteDestination: True Destination: Variable's name which is to contain the original xml minus the DTD. SecondOperandType: Variable
That stuff I understood. I'll replace variables with my files because they are stored that way, but from what I can tell, that's not my problem.
The stuff he says below this comment is going over my head like a ton of bricks. I can't figure out how to do it.
This is the kind of line of my XML that I want to strip out.
https://www.myaddy.com/pbdr.dtd"[]>
and then he said this...
Code Snippet Since XSL doesn't know about DTDs, telling it to copy everything strips out DTDs. Then use the Variable specified in the Xml task's SecondOperand as the Source data for the xml source.
A note on how to paste a multi-line xml document into a Integration Services String variable:
Integration Services String variables textboxes are not multi-line, in the Windows sense of a line (CR+LF),
So, in order to paste multi-line text (which xml docs almost always are), save a temporary copy with a unix line ending.
That is, create an xml file in visual studio, and paste your sample original xml in there. Go to File/Advanced Save options, and save the xml with the the settings of Encoding: Unicode (utf-8 without signature) - CodePage 65001, and most importantly, set the Line endings dropdown to "Unix (LF)".
After selecting "OK", copy and paste the text from Visual Studio's xml file editor into the IS variable, and you'll note all the xml data appears.
So can anyone walk me through a dummies version of what he is suggesting to do?
I have a class that utilizes the ThreadPool together with a ManualResetEvent to queue up work items (in this case, FTP downloads) and then waits until all work items have completed before proceeding.
I then use this class inside a Script Component. However, I am getting a "remote procedure call failed" every single time the FTP component starts a download. This same class works perfectly in a WinForm app that I created as a test harness. Also, the synchronized version of the FTP download component works perfectly well from the Script Task -- it's only when I "wrap" the synchronous version in a threaded version that it fails.
Also, when the "remote procedure call failed" exception occurs, sqldumper.exe runs for a split second and creates a minidump. I, unfortunately, cannot inspect the dump because VS2k5 throws a native error when I try to "debug" the dump.
Is it possible to utilize multithreaded code inside SSIS? I noticed that SQL Server prohibits the use of threading as part of its hosting requirements (http://msdn2.microsoft.com/en-us/library/ms172338.aspx) but I'm not sure how that would impact (if at all) the SSIS host.
I have tables like the one below for my Stage and dimension tables:
Stage Table
accountid
name
address
Dimension Table
accountkey ---- surrogate key (DW key)
accountid ---- business key (transaction's primary key)
name
address
I used slowly changing dimension to detect the changes for the records inside my Dimension table. But I had a problem when a new record exists in the stage table. The accountkey is set as the primary key and it gets its value from a different table which stores the last account key that was created. I cannot load all the changes unless i have a business key. Is there a way that i can get the "last key" from a different table in the data flow area and then supply it together with the other fields in the new output branch of the slowly changing dimension?
I am using an XML task for validating the XML data against the Schema XSD. I have more XML Files with same the schema. I have to used a for loop container which has an XML task for validate XML. The loop container gets the XML File into variables name "XMLFileName" which the loop current file, in turn, used by XML Task for validation.
XML task is configured in the option "Validate". I have provided the XML Data in variable name "XMLFileName" also get the name from the loop container and XSD file content File Connection. XML Task stored the result in the another variable name "OKFormat". FailOnValidationFail property set to false.
It had the error when I run the package, the error msg as below:
Error: 0xC002F304 at XML Task, XML Task: An error occurred with the following error message: "Data at the root level is invalid. Line 1, position 1.".
Error: 0xC002928F at XML Task, XML Task: Property "New Source" has no source Xml text; Xml Text is either invalid, null or empty string.
Task failed: XML Task
After that, I had to change the source type from Variable to File Connection, and had to test fixed to some xml file it had ok for validate the XML file againt XSD.
I don't know this is the wrong setting or bug of SSIS, anyone can guide me through.
I have VS 2013 installed in my machine with SQL server 2012 ,I have installed Microsoft data tools for VS 2013,In the integration service project  i used script component when i try to pen the script task its not opening VSTA projects ,its simple ideally without any action.I am facing this issue for past 2 months i tried fixing this problem but no use.
The script  task editor has "Access VSTA to write script using VS 2012".So i installed VSTA tools for 2012 and 2013 but no issue.
But the script component works for VS 2010.I have installed Microsoft Visual Studio tools for VS 2012,VS2012 AND VS 2013.
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
Does anyone know how to do this using variables? Everytime I try it, I get the
Error: Failed to lock variable for read access with error 0xc00100001.
I also tried it writing a script and still the same error. If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename. So the value of the variables will change everyday. Here is my expression:
I am trying to prove I can use SSIS to connect to a web service. The WS I am trying to connect to was developed by a vendor and covered by a NDA, but I was able to reproduce the issue with a public WS.
Here are the steps to reproduce the issue:
In the Web Services Connection Manager, I entered http://office.microsoft.com/Research/Providers/MoneyCentral.asmx?wsdl in the URL window. I am able to successfully "test" the connection I pasted the above link into IE and saved the resulting XML as a .wsdl file on my local machine. In the Web Services Task Editor, General Tab, I specify the path to the .wsdl file and click on "Download WSDL" button. No Issues When I click on "Input" and select "MoneyCentralRemote" from the drop-down for Service, I receive an error message saying "This version of the Web Services Description Language (WSDL) is not supported"
So the questions are:
Did I perform the above steps correctly? What WSDL versions are supported in SSIS? How can I tell what WSDL version was used to create the .wsdl I am trying to access? If the WSDL is an unsupported version, is there a work-around to fix the issue?
I am looping through xml files and validating them with the XML Task. On sucess I want to perform task 2, on failure I want to perform task 3. When one file fails to validate all subsequent tasks fail.
I have also tried putting the result in a variable instead of using the success constraint. I get the same result, the variable keeps the failed value after the first file fails. Any advise is greatly appreciated.
in a SSIS 2012 pkg, I'm trying to specify a SELECT TOP ? myColumn FROM myTable inside an Execute SQL task, but unsuccessfully.Is it possible to parameterize the TOP clause?
Could someone please instruct me on how to use the File System Task Editor to rename a file? I place control on control flow tab, change the operation to rename, from there I am not sure what to do.
In a Data Flow, I have the necessity to use a SSIS variable of type €œObject€? inside Script Component and assign to it the content of 'n' variables of string type. On exiting from the script the variable of type object should contain something like in the following lines: AAAAAAAAAAAAAAAAAAAAAAAAAAAAA BBBBBBBBBBBBBBBBBBBBBBBBBBBBB CCCCCCCCCCCCCCCCCCCCCCCCCCCCC DDDDDDDDDDDDDDDDDDDDDDDDDDDDD €¦€¦€¦€¦€¦€¦€¦. €¦€¦€¦€¦€¦€¦€¦. On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion. Is there anyone who have experienced something like this? Could anyone provide any example of that? Thanks in advance!
I'm just learning SSIS and I've hit my first bump. I am doing a bulk import from a tab delimited text file to an empty sql table that has a Idendity column defined. How do I tell the bulk insert task to skip that column when inserting from the text file. If I remove the identity column it imports the data fine, but I want to create the indentity column in the table too.
For inserting current date and time into the database, is it more efficient and performant and faster to do getDate() inside SQL Server and insert the value OR to do System.DateTime.Now in the application and then insert it in the table? I figure even small differences would be magnified if there is moderate traffic, so every little bit helps. Thanks.
I'm trying to execute a stored procedure within the case clause of select statement. The stored procedure returns a table, and is pretty big and complex, and I don't particularly want to copy the whole thing over to work here. I'm looking for something more elegant.
@val1 and @val2 are passed in
CREATE TABLE #TEMP( tempid INT IDENTITY (1,1) NOT NULL, myint INT NOT NULL, mybool BIT NOT NULL )
INSERT INTO #TEMP (myint, mybool) SELECT my_int_from_tbl, CASE WHEN @val1 IN (SELECT val1 FROM (EXEC dbo.my_stored_procedure my_int_from_tbl, my_param)) THEN 1 ELSE 0 FROM dbo.tbl WHERE tbl.val2 = @val2
SELECT COUNT(*) FROM #TEMP WHERE mybool = 1
If I have to, I can do a while loop and populate another temp table for every "my_int_from_tbl," but I don't really know the syntax for that.