Hi,
I drag the database Backup Task from the toolbox and double-click on it, it shows this error:
Cannot show the editor for this task.
Additional information
Method not found: 'Void Microsoft.SQLServer.Management.DatabaseMaintenance.TaskUIUtils..ctor()'.
(Microsoft.SQLServer.MaintenancePlanTasksUI)
What is the prob with this?
cherriesh
I am using SSIS 2008 tool for developing ETL package. I get below error whenever I click on script task editor.Cannot show Visual Studio 2008 Tools for Applications editor. (Microsoft Visual Studio).
View 2 Replies View RelatedHi,
I've developed a couple of components now and I know I've seen this problem before but I can't remember how to solve it. My component is built, it has it's own (blank at the moment) UI and it seems to work fine except that there is no right click option to look at the advanced editor. The code is almost identical to another component I wrote that works just fine.
Any ideas anyone?
Thanks
Charlie.
SSRS expression editor background color showing as green how to change it to Grey....
View 3 Replies View RelatedI am backing up a database as follows:
backup database PPLicense to disk = 'D:License.bak'
I have run this 5 times. If I know run this command:
restore headeronly from disk = 'D:License.bak'
I can see 5 entries returned this all looks good. In SQL Management studio I try and restore this database by selecting the file. The Restore Database dialog only shows the last backup set position i.e. position 5 and now the 4 before it. Why is this not showing the 4 previous backups?
I am using SQL Server 2012 SP 2 (Version 11.0.3460).
Does anyone know how to do this using variables? Everytime I try it, I get the
Error: Failed to lock variable for read access with error 0xc00100001.
I also tried it writing a script and still the same error. If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename. So the value of the variables will change everyday. Here is my expression:
@[User::Variable] +(DT_WSTR,4) YEAR( GETDATE() )+"0"+(DT_WSTR,2) MONTH( GETDATE() ) + (DT_WSTR,2) DAY( GETDATE() )
The result:
C:Documents and SettingsmroushDesktopOSU20060818
the 20060818 part will change everyday ie.(tomorrow will be 20060819, next day 20060820 and so on.)
hi,
lets say i have an input param calld x.
i want to use it inside sql task:
i try to put if(? = 0)
begin
do somthing
end
but i get an error.
the variable is configured correctly in the mapping input as i have succeeded to do the
same with insert: insert into y values(?)
why it does not work with if statment? how can i use it?
thx,
Tomer
How can I create encryption on database ?. When I try to apply encryption on my database then it showing error message below....
View 9 Replies View Relatedhi !
I have problem here with sql task editor. i have a stored proceedure with 1 input value and 1 output value which needs to be updated in a variable.
stored proc - exec GetRDate ? , ? output
input value is set in a varaible.
I tried giving 1 input and 1 output in the parameter box and result set as fullresultset 1 value for variable -
" failed with the following error: "No disconnected record set is available for the specified SQL statement.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Get Retention Date
what should i give in the parameter and result set
Thanks,
Jasmine
Hi,
Im trying to do an Insert:
INSERT INTO myTable(column1)
VALUES(..)
How can I use my parameter mapping value inside the SQL statement ablove?
Thank you.
This code works in the SQL task in dts packages but not in SQL task in SSIS. It would run the file but the problem is that when there is an error it doesn't raise the error in SQL task in SSIS. Anyone can provide me with a solution would be appreciated.
USE MASTER
DECLARE @result int
EXEC @result = xp_cmdshell 'dtexec /f "D:File2.dtsx"'
If (@result <> 0 )
BEGIN
RaisError ('Job Failed.',16,1)
END
Hi,
I am trying in the Back Up Database Task to set the Value of SelectedDatabases via Expression.
Is there any way?
Thanks,
Willfried
SQL Server 2005 SP 1 + Hotfix
This error is pretty persistent. I re-installed VS 2005 and SQL Server 2005 but did not help. Every time I try to open a Script Task editor it gives me the same error regardless of the project or package. DO I NEED TO REBUILD MY SYSTEM ?
===================================
Cannot show the editor for this task. (Microsoft Visual Studio)
===================================
Specified cast is not valid. (Microsoft.VisualBasic.Vsa.DT)
------------------------------
Program Location:
at Microsoft.VisualBasic.Vsa.Dt.VsaIDE.get_ExtensibilityObject()
at Microsoft.SqlServer.VSAHosting.DesignTime.get_ExtensibilityObject()
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptTaskUI.Dispose()
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptTaskMainWnd.Dispose(Boolean disposing)
at System.ComponentModel.Component.Dispose()
at Microsoft.DataTransformationServices.Design.DtrPackageDesigner.DoDefaultActionForTask(TaskHost task)
-------
Any help is appreciated.
Gulden
.......
Since applying July 2007 Microsoft patches it was noted that we were not able to open the editor for the Script Task component in an SSIS package. We received an error dialog with text similar to 'Engine failed with unknown error. (Microsoft.VisualBasic.Vsa.Dt).' All other solutions provided in the forum did not resolve our issue. It was noted somewhere else that the OLE32.dll seemed to have been affected. We reregistered this file using the command 'regsvr32.exe ole32.dll' and suddenly we were able to get into the editor. I don't know why this fixed the issue, but it did for us in our environment. Good luck!
View 3 Replies View RelatedHi Guys!
I am trying to create a 'scheduled back up database task'maintenance plan which has an option to 'overwrite backups' but with also the "Create a backup file for every database" option checked. Does anyone know how to do this?
Thanks Guys.
I want to take a sql server 2005 database backup on task schedule every 1 hour is that possible.
View 1 Replies View RelatedHi,
In my SSIS package, I have a backup database task. When I run the package with DestinationAutoFolderPath set to a folder ("Network Service" account has full permission on this folder) and DestinationCreationType set to Auto, the task works just fine creating a backup with its own name. (similar to database_date<count>).
But what I want is in my front-end I am allowing the user to specify the name of the backup file. So I want the task to create the backup file in the name I supply. I set the DestinationCreationType to manual and in the application code added the DestinationManualList with the path from the UI.
Now the pacakge runs fine but does not take any backup. There is no errors as well. If I set the FailPackageOnFailure and FailParentOnFailure to true, then I am getting the DTSExecResult.Failure but I am not getting the actual error from the backup database task.
Am I missing anything here?
Thanks in advance,
Srikanth.
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters.
For the life of me I can't figure this one out. I'm trying to call a web service using the SSIS "Web Service Task". I give the Connection Manager a valid URL, download the WSDL, and go to the input pane of the "Web Service Task" options. No problems. I select my web service and pick a web method from the methods drop-down box. No problems. But where it should pop up with an input dialog box that allows you set your inputs for the web service call, nothing shows up. No errors are reported; the input pane just remains completely blank. I can inspect the WSDL with other tools (like Altova's XMLSpy) and plainly see the inputs it takes. I haven't seen a similar issue posted on this forum so I don't know if I'm going nuts or my version of SSIS is evil or what. I applied SQL Server SP1 and SP2 but it didn't change anything. I then tried to connect to one of Amazon's public web services to see if it was a problem related to our in-house WSDL formatting, and I discovered the same problem. Take for instance
http://webservices.amazon.com/AWSECommerceService/AWSECommerceService.wsdl?
I create a Web Service Task for this service and when I go to select the "ListLookup" method from the drop-down box on the input page no input parameters appear. The WSDL clearly defines this method to take a bunch of inputs. If anybody has any ideas about what's going on here I would greatly appreciate the help. Thanks.
Hello,
I am using EM to administer SQL 6.5 SP5a and have a few dBs that do not show backup history by expanding the backup device. The server is regestered as SA and MSDB does contain the the correct data in the sysbackuphistory table. MSDB DBCCs OK and other dBs show history. I manage multiple SQL 6.5 servers but this is the first time I've seen this and can find no info in the various KBs or NGs..
Anyone have any clues?
Thanks,
Jack
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
I have VS 2013 installed in my machine with SQL server 2012 ,I have installed Microsoft data tools for VS 2013,In the integration service project i used script component when i try to pen the script task its not opening VSTA projects ,its simple ideally without any action.I am facing this issue for past 2 months i tried fixing this problem but no use.
The script task editor has "Access VSTA to write script using VS 2012".So i installed VSTA tools for 2012 and 2013 but no issue.
But the script component works for VS 2010.I have installed Microsoft Visual Studio tools for VS 2012,VS2012 AND VS 2013.
This issue is occurring for VS 2012 and VS 2013.
Hi,
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
João
I am trying to prove I can use SSIS to connect to a web service. The WS I am trying to connect to was developed by a vendor and covered by a NDA, but I was able to reproduce the issue with a public WS.
Here are the steps to reproduce the issue:
In the Web Services Connection Manager, I entered http://office.microsoft.com/Research/Providers/MoneyCentral.asmx?wsdl in the URL window. I am able to successfully "test" the connection
I pasted the above link into IE and saved the resulting XML as a .wsdl file on my local machine. In the Web Services Task Editor, General Tab, I specify the path to the .wsdl file and click on "Download WSDL" button. No Issues
When I click on "Input" and select "MoneyCentralRemote" from the drop-down for Service, I receive an error message saying "This version of the Web Services Description Language (WSDL) is not supported"
So the questions are:
Did I perform the above steps correctly?
What WSDL versions are supported in SSIS?
How can I tell what WSDL version was used to create the .wsdl I am trying to access?
If the WSDL is an unsupported version, is there a work-around to fix the issue?
http://omni.game-host.org/1.jpg
http://omni.game-host.org/2.jpg
http://omni.game-host.org/3.jpg
http://omni.game-host.org/4.jpg
Could someone please instruct me on how to use the File System Task Editor to rename a file? I place control on control flow tab, change the operation to rename, from there I am not sure what to do.
View 29 Replies View Related
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
hi,
I have created a SSIS package that does nothing more than loop through all DBs and copies the userDBs to another server. However, I keep getting an error after the task has created the database during its execution of "Create Role" statements. Here is the error:
Error: The Execute method on the task returned error code 0x80131500 (ERROR : errorCode=-1073548784 description=Executing the query "CREATE ROLE [aspnet_WebEvent_FullAccess] " failed with the following error: "User, group, or role 'aspnet_WebEvent_FullAccess' already exists in the current database.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. helpFile= helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}). The Execute method must succeed, and indicate the result using an "out" parameter.
Now it appears to me that the Transfer DB task keeps using master as the current database even after it has created the new DB? Why would it does this when at the source the database role is under the usersDB?
thanks,
Derek
This has been a funny week. things that were running just fine till last week (and for the last many months) have started giving problems despite that I have not changed any settings.
The problem is that one of my scheduled jobs has started failing. The job used to simply takle a backup of a database. When I tried to probe into it and tried to manually take the backup (via Enterprise Manager..) I get a dialog box with the message:
Cannot open backup device 'D:BackupSales'. Device error or device off-line.See the SQL server error log for more details.
Backup database is terminating abnormally.
Can someone kindly guide me how to solve this.
Many TIA.
I have an ASPNET webform to manage sql express 2005 backups.
If i test the application with the debugger and click the button to made a backup, everything works ok and the backup is created inside my web application folder. When i run the web app under IIS, if I try to do the backup i recieve the following error:
Server Error in '/test' Application.
--------------------------------------------------------------------------------
User does not have permission to perform this action.
User does not have permission to perform this action.
Processed 416 pages for database 'test', file 'test' on file 5.
Processed 3 pages for database 'test', file 'test_log' on file 5.
BACKUP DATABASE successfully processed 419 pages in 0.754 seconds (4.543 MB/sec).
I have included the <localmachine>ASPNET user in my database with
schema 'dbo' and 'db_owner' permission. I have also change the security directives of the folder where the backup is going to be saved (write permission,creation,etc..) but it doesn´t work.
It seems as if the ASPNET user have not enough permissions to do the backup operation
Any Idea??
I am having a problem in the Business Intelligence Development Studio. When I add and try to edit a Script Task or a Script Component, I click on the Design Script button and get one of two errors. For the Script task I get an error that states:
Cannot show the editor for this task. (Microsoft Visual Studio)
For the Script component I get:
Cannot show Visual Studio for Applications editor. (Microsoft Visual Studio)
For some reason or another it just will not start Visual Studio for Applications. I have uninstalled an re-installed several times. I have also researched and discovered that there is a bug when C# tasks are include in the project. However, this is not the case. Please help!
i have a data flow configured to use a ole db source. the ole db source uses an ole db connection manager pointing to the adventureworks db which suceeded when i tested its connection. the data access mode of the ole db source is "sql command". below is the sql command text:
SELECT SpecialOfferID, Description
DiscountPct, Type, Category, StartDate,
EndDate, MinQty, MaxQty, ModifiedDate
FROM Sales.SpecialOffer
WHERE ModifiedDate >= ? AND ModifiedDate < ?
this query uses 2 paramaters, each of which is mapped to a datetime variable which falls with the range of the ModifiedDate column as follows:
Parameter0: User::ExtractStartDate
Parameter1: User::ExtractStopDate
ExtractStartDate is set to 7/1/2001 and ExtractStopDate is set to 3/31/2004. however, i get the following error when i press the preview button in the ole db source editor: "there was an error displaying the preview. additional information: no value given for one or more required parameters (microsoft sql native client)".
as far as i can tell, i have the ole db source configured correctly. thus, i can't figure out why this error is being generated. has anyone else experienced this issue? if so, were you able to resolve it? is this a bug?
thanks in advance.
is there some way to access a corrupted database with a text editor so that I can copy over my text database to a new database file? I apparently have corrupted my file headers of both the online database and my backup copy.
Thanks in advance for your help