I have reserved my copy of Windows 10 and have attempted five times to upgrade but it just keeps failing.
The error code is: 80240020.
I have made sure that my laptop meets the specification, which is does, and also the disk space on my harddrive too.
Download of the installer fails 3 times with error 80240020 on Windows Update
System on Pc is Windows 7 Starter with update SP1 .Enough Ram 2G
I triggered the manual update through the command line. Win 10 downloaded and failed at 99%. I got this error Code 80240020. How to fix it?
View 1 RepliesI cant upgrade to windows 10, i tried using media creation tool also but didn't work.
View 9 RepliesTrying to update to windows 10. Failed over a dozen times. The update is free for me.
View 2 RepliesI'm updating from 10041 to 10061 and every time get the "oops something went wrong..." message with no error code around 30~40% into installation. Any remedy or am I not the only one?
View 6 RepliesMy backup is failing ( three times) with 0x80780065.
There are three backup sets
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2015-06-01 070022 98,038 Files, 536 Folders
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2016-01-21 181147 691 Files, 7 Folders
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2016-03-04 160552 376 Files, 5 Folders
I would like to delete all three backups and start over using the windows 7 backup and restore offered by win 10 backup. Is this a viable plan?
I got the little 'Get Windows 10' icon and reserved my copy, all fine. But it still doesn't actually say it can install, not sure why. But my laptop has now tried to install W10 5 times, without telling me it was going to or asking my permission. And all five times it has failed with error code 80240020. This is not my area of expertise and I don't know why it keeps doing this. I'm not even sure I want to install it; I only reserved it to see what everyone else thought and I figured I'd have some kind of say in the matter. Basically, is it supposed to do this? And what can I do to fix it, either by stopping it trying or installing it properly?
View 2 RepliesNo luck in installing Win 10 Home to their HP Stream 8? When I forced an upgrade I got Error 80240020 when installing. Using iso was a no go also. Maybe because it has a compressed OS? I have enough free space on drive c.
View 1 RepliesThe upgrade to Windows 10 from Windows 7 x64 keeps failing. I get this error code: C1900204.
I have tried removing the folder and executing the command. Keep getting this error: C1900204.
I tried to upgrade to Windows 10 from pro 7. When going online I get this message....
explorer. exe - Application Error
The instruction at 0x60B52556 referenced memory at 0x60B52556. The memory could not be written. Click ok to terminate the program.
If I close with the "x" I can continue. But when I close Firefox I get a black screen and have to restart. Anytime I use a program it does this. What to do.
Getting this Error code: 0xC004F034 after upgrade to windows 10?
View 9 RepliesI received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
Anti virus is just Windows Security.
Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 RepliesUpgrade to Windows 10 Pro, version 1511, 10586. has been installed but the Restart Now button did not work. It says
We're having trouble restarting to finish the install. Try again in a little while. If you keep seeing this, try searching the web or contacting support. This error code : (0x80070032)
I manually restart the PC but the update did not applied.
Windows 10 download has been trying to update and failed at least 25 times, same error 80240020.
I have tried deleting files in the C;/windows/softwaredistribution/download and running wuauclt.exe/updatenow but no luck.
Download got to around 75% last night and failed.
I upgraded to windows 10 today. but the update failed and I got a boot phase error. soon after my system reverted back to windows 7, but it took 4 minutes for my system to actually get to the welcome screen, and it's been doing that since my attempt at upgrading, could this be a result of hard drive falliure or just the OS? should I do a clean install?
View 1 RepliesI don't really know whats going on but I wiped my old system, re installed win 7 and then upgraded to win 10 and now my oc motherboard bundle keeps failing. I can use the computer for 10 to 20 mins and then it powers itself down resets and comes up with a message saying the settings have failed, if I re load the profile and reboot the comp will work until I turn it off for the night and then the same problem following day.
The bundle worked fine since I purchased it at the beginning of the year and is oc through bios by overclockers uk so I thought it didn't make any difference what os I used....
breeze msi z97 intel i5 4690k @ 4.2 overclock bundle
16G Ram
Zotac 780ti sli
500gb Samsung ssd
win 10 64 bit
Upgraded to W10 on Surface Pro3 and it seems Outlook 2013 SMTP emails failing to send. emails send OK on other devices and all OK via Outlook web.
When testing the setting in Outlook test email send OK but when going back into the email account email fails to send with following error:
Task 'email address' - Sending' reported error (0x800CCC13) : 'Cannot connect to the network. Verify your network connection or modem.' Used different network connections with no success.
Have had home builds for years with no big issues before windows 8.1 and now windows 10. I thought i had issues with memory or graphic card on my previous computer so i ended up buying new parts for a new build.
But nothing changed. Not so frequent as before but up to several times a day my computers gets an BSOD. I must say it is random for me what i am doing while this happens.
Different messages before restarting. The 2 last one while trying to create this thread and making the dump zip file was Kernel check failure and DPC watchdog violation.
KONTORPC-08_11_2015_14_13_22,16.zip
Okay so i have download threw windows installer, it gets to about 60% on the install (its in the installer not windows update)and gives me an error message (i have not been quick enough to catch it yet) and then reverts right back to windows 8.1. Then MAKES ME re download windows 10 AGAIN!! I am going to try to catch the error the next time, but crashing during install and then reverting back to 8.1 just to redownload it.
Also according to windows update it has failed to install 16 times!!!
I just bought a custom rig and the BSOD keep popping out every now and then. The BSOD are different every time.
Other than that, I noticed that Firefox and Origin program keep crashing as well....
Attached is my dump file for your comment.
Within an hour or so, there are crashes on Mozilla Firefox and several BSODs. The second attachment is the latest dump file
I recently managed to get a cryptowall/cryptolocker virus. I wiped everything, formatted c: and reinstalled windows 7 home premium. Was getting constant, seemingly random BSODs 10+ times daily. Tried a bunch of things, didn't work, so recently upgraded to windows 10. The BSOD's are a lot rarer but still occur at annoying times.
I've had the PC for nearly 3 years now. Prior to the reinstalls there was never 1 BSOD and the machine would stay stable for weeks on end without a restart or issue.
I have already upgraded to WIN10 from WIN7 on my experimental desktop and then reverted back using the built in facility. Can you do this more than once if you keep on wanting to give it a go to see if bugs have been fixed or is this eventually going to cause issues with the license?
View 3 RepliesI have an H/P Pavilion g6 lap top. Tried to upgrade to Window 10 twice today. It seems to down load fine, and starts the install phase, when it gets to the black screen where it say it will restart many times, it starts copying files. It gets to 85/87% it shuts the power off to the computer. When you push the power button, it starts up, saying it is restoring previous version of Windows (8.1). Gives a dialog block with Red Shield and an (X) saying some updates were not installed, Error found C1900101-2004...
View 1 Replies
