The upgrade to Windows 10 from Windows 7 x64 keeps failing. I get this error code: C1900204.
I have tried removing the folder and executing the command. Keep getting this error: C1900204.
I have reserved my copy of Windows 10 and have attempted five times to upgrade but it just keeps failing.
The error code is: 80240020.
I have made sure that my laptop meets the specification, which is does, and also the disk space on my harddrive too.
I upgraded to windows 10 today. but the update failed and I got a boot phase error. soon after my system reverted back to windows 7, but it took 4 minutes for my system to actually get to the welcome screen, and it's been doing that since my attempt at upgrading, could this be a result of hard drive falliure or just the OS? should I do a clean install?
View 1 RepliesI don't really know whats going on but I wiped my old system, re installed win 7 and then upgraded to win 10 and now my oc motherboard bundle keeps failing. I can use the computer for 10 to 20 mins and then it powers itself down resets and comes up with a message saying the settings have failed, if I re load the profile and reboot the comp will work until I turn it off for the night and then the same problem following day.
The bundle worked fine since I purchased it at the beginning of the year and is oc through bios by overclockers uk so I thought it didn't make any difference what os I used....
breeze msi z97 intel i5 4690k @ 4.2 overclock bundle
16G Ram
Zotac 780ti sli
500gb Samsung ssd
win 10 64 bit
Trying to update to windows 10. Failed over a dozen times. The update is free for me.
View 2 RepliesI'm updating from 10041 to 10061 and every time get the "oops something went wrong..." message with no error code around 30~40% into installation. Any remedy or am I not the only one?
View 6 RepliesMy backup is failing ( three times) with 0x80780065.
There are three backup sets
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2015-06-01 070022 98,038 Files, 536 Folders
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2016-01-21 181147 691 Files, 7 Folders
EXTERNALDRIVEFranksBackupsFRANKSPCBackup Set 2016-03-04 160552 376 Files, 5 Folders
I would like to delete all three backups and start over using the windows 7 backup and restore offered by win 10 backup. Is this a viable plan?
Upgraded to W10 on Surface Pro3 and it seems Outlook 2013 SMTP emails failing to send. emails send OK on other devices and all OK via Outlook web.
When testing the setting in Outlook test email send OK but when going back into the email account email fails to send with following error:
Task 'email address' - Sending' reported error (0x800CCC13) : 'Cannot connect to the network. Verify your network connection or modem.' Used different network connections with no success.
So I've had this computer for about a year now. I made it from used parts but in very good condition. Recently, I just turned it off, and when I turned it back on, an error popped up, something like winboot.exe, it doesn't really matter.
I tried to do a clean install of win 10 and win 7, and both times my SSD didn't have a partition.
I didn't delete it beforehand so it was weird.. And when I try to create a new one, an error pops up and I can't create it.. I did a clean install on a new HDD and the windows works, I just miss the boot speed..
My wife's Samsung laptop gets a failure whenever trying to do an image backup. Actually, this has been happening for quite a while - even before she installed Windows 10 when she had W7. I was hoping that the problem would go away with W10 but it hasn't. Backup runs almost to the end and then fails with the attached message. The message says to run dskchk on both her drive and on the backup drive which I did. No problems were found. (I backup my desktop on that drive all the time with no problems.) I tried backing it up on another external drive that also tests good but got the same error message.
View 9 RepliesI cannot start Windows my laptop. I can get into safe mode. I've tried to system restore and clean boot. I have tried verifier which gives the error iastor.sys
Attached are the zip files.
KEN-PC-07-Sep-15_233134_66.zip
I clicked on the "View download progress" button and I get the message; "Something went wrong. Please try again later".
I should note that I got an error message earlier when upgrading that said I was getting the "update error 0x80080008". I eventually fixed that using a .bat file I learned from another site but now I'm getting this new error.
I received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
I'm getting this error while trying to preview a PDF in Outlook 2013, using Adobe Acrobat Pro 9.0 as the default.
This file cannot be previewed because of an error with the following previewer:
PDF Preview Handler for Vista
Hp 255 failing to open desktop, gives this notification -" C:Windowssystem32configsystemprofileDesktop is unavailable. or Desktop and Cotana is not available".
View 1 RepliesI pretty much gave up trying to install this thing after 3 days of trying. Keeps trying to install and fails.
View 2 Replieswhenever I try to install the AMD drivers either via running the installer or auto detect, in the end I'm getting a message saying files did not install and to check the log file. I've got an Asus r9 280x. Control panel says "microsoft basic display adapter" under display adapters.
View 1 RepliesI have 3 drives. A 60GB Intel SSD which my OS is installed on, a Samsung 120GB SSD which has just games, and a 1TB HDD for all my other media and documents. A while back my power cut out and when trying to reboot it would fail until I tried booting from my 120GB SSD, which didn't make much sense as my OS is my 60GB Intel SSD. After that I had no issues for a long time until recently where my computer (after updating overnight is my guess) wasn't booting until I tried booting from my 1TB HDD, which confused me even more as again my OS is not installed on my HDD. And now I'm basically in a situation where my PC will boot every once in a while FROM the 1TB, today it wasn't booting from any drive for a while until I unplugged and replugged the SATA cables from all of them then tried again. I have a backup of my OS on a hard drive and made a system repair disk for windows 10.
View 1 RepliesI have Windows 7 Pro on a Dell 5420 laptop. I've tried the upgrade multiple times and it always gets to 84% and then the screen goes black/blank. It sits there for upwards of a couple hours. After that it reboots and says Restoring previous version of Windows and I end up back at Windows 7.
I don't know if there's any logs somewhere I could check to try to figure out what the problem is.
Do I have any options for upgrading this laptop if the update from 7 to 10 won't work? From what I've read I need to get the in place update to work in order to get a valid Win 10 key so I might be screwed...?
I have attempted to download windows 10 around 4/5 times, the download completes and states that my computer needs to restart upon which it claims it is configuring the windows 10 upgrade. I would assume from this point it would restart into the windows 10 configuration however each time I have tried it it restarts back into windows 8 as if nothing had happened.
My laptop then opens up windows update and says I am able to download windows 10. This is really frustrating as I can't even seem to get into the windows 10 setup.
As you can see I am attempting to download again but there is no trace at all of it attempting to install windows other than this failed update that you can see here.
I am using an HP Pavillion 15-n268a laptop.
Im trying to install windows 10 final on my ASUS x205ta, but the problem being that it has a 32GB ssd, and there is nothing on it but the OS, yet i still have the error of it saying there is not enough space, what should i do?If i get the ISO and install it that way will i still run into these problems? Plus i dont know my product key since it is a free upgrade and windows offered it to me? Is there any way to do this? I hate windows 8 and much prefer windows 10,
View 1 RepliesOn Window 8.1. Boosted the install which a lot of people are doing by clearing SoftwareDistribution/Download and running the cmd prompt.
Downloaded the Windows 10 update, as soon as the Preparing to Install dialogue was done, the computer restart, trying to install a normal Windows 8.1 update instead.
Once I am booted up again, I get this error [URL] .... and try the fix.
Once I try and redownload the update again, it skips to 100%, then fails the update with the error 80070643 being reported.
I have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
I am now getting a new error. The error i am now getting is error C1420127 windows 10 now installs almost but towards the end it stops and says error and then when i go to look at it that is what the error is.
View 9 RepliesUsing the media creation tool (both usb and ISO) I get an error. Something like "installation has encountered an error during first_boot with sysprep." In not at my toshiba laptop at the moment so the wording may be a little off. Upgrading from my 8.1 current os. I just read about removing my eset antivirus before upgrading so I will remove that and my malwarebytes program as well and try again.
View 2 RepliesI have a domain based on samba 4.1.17-Debian ... I bought 10 laptops with W7 preinstalled .... With some fiddling in the registry the can successfully join my domain and everything works perfectly.....
But ... after upgrading those PC to W10 ( with automatic upgrade) i cannot logon anymore on domain. (local logon is ok) ... I get the message " no access server is currently available to open the session " ( translated from french , so the english message can be slightly different...)
Note that with a local session I can see and access the shared folders (mydomainsharedfolder )on the domain pdc, meaning that i can eliminate an authentication or dns problem ...) Same behaviour on all laptops...
