Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 RepliesI received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
I have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
Cannot upgrade to windows 10 from windows 7, Fails at 25% with error 0XC1900101 - 0X20004. How can I get around this error and what is causing error.
View 3 RepliesI have tried and tried to upgrade from WIN 8.1 to 10 with no success.
The error that comes up is "0x80070004 - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."
I have removed all 3rd party antivirus, and a bunch of other fixes. A
I tried to upgrade to Windows 10 from pro 7. When going online I get this message....
explorer. exe - Application Error
The instruction at 0x60B52556 referenced memory at 0x60B52556. The memory could not be written. Click ok to terminate the program.
If I close with the "x" I can continue. But when I close Firefox I get a black screen and have to restart. Anytime I use a program it does this. What to do.
Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
Anti virus is just Windows Security.
I guess the title says what my problem is. So, I finaly got to install KB3081444 without any issues, and now, this update is doing infinite restarts on Windows Update. I tried:
1. Installing from offline downloaded installer - the same error code.
2. Did DISM, both commands failed.
3. SFC says no issues.
Windows Update files will be shortly.
I had upgraded from W8.1 and Windows 10 was activated. I was under the impression that I didn't need a product key and that my PC would be recognized after doing a clean install. Now I have W10 installed fresh, but get the error code: Error code: 0xC004C003
View 9 RepliesWhen I try to install games with Installshield Wizard, it doesn't install. It acts like it does but doesn't. The progress bar doesn't move at all and it will be like that as long as you let it. No error code or message.
View 1 RepliesSo i did a BIOS Update on my Msi Mobo. I Have an Activate Windows Watermark on the bottom right corner. But it only just came up randomly after the pc being online and on desktop for 4-5 hours. But if i would to restart my pc my windows would be activated when i first start upp but if i stay online and keep pc online on desktop the activate windows will pop upp again. My key works if I am starting windows with it activated.
Updated 2-3 hour later. So i restart pc the minute i posted this and got into windows and the activate windows wasn't there. But after playing The Division for like 2-3 hours the windows activate came across my screen. And i look up error and theres nothing on google.
Error Code: 0xD000000272
I can download windows ten but when the pc restarts and boots back up it shows the installing screen for a split sec then restarts again and gives me this error.
View 1 RepliesI have a Surface Pro 2 and recently got the Windows 10 upgrade invite. However, the upgrade refuses to download. Every time it comes to 30-40%, there is some or the other error msg. I have tried the system support options. No change in situation...App
View 4 RepliesGetting this Error code: 0xC004F034 after upgrade to windows 10?
View 9 RepliesI've successfully updated to Windows 10 on my two Surfaces, but there is some kind of issue on my desktop PC. The upgrade process from Windows 8 fails at about 71% total (Installing features and drivers at 91%), and the error I get is:
C1900101-40017 Windows Update ran into a problem.
When I click on "Get help with this error" I'm directed to a page with some general troubleshooting with Windows Update. I've run Windows update repair tool and it fixed some issues, but the installation failed again.
I have now tried freeing up more disk space which I admit was a bit tight and I'm preparing to run the update again. Still, I'd prefer if there was a more detailed error message or a log file where I could see what exactly went wrong, but there are no indications where I might find one (either in the error message, the troubleshooter, or Google). As it is, I'm shooting blind here and this will now be my fifth upgrade attempt.
Upgrade to Windows 10 Pro, version 1511, 10586. has been installed but the Restart Now button did not work. It says
We're having trouble restarting to finish the install. Try again in a little while. If you keep seeing this, try searching the web or contacting support. This error code : (0x80070032)
I manually restart the PC but the update did not applied.
I have reserved my copy of Windows 10 and have attempted five times to upgrade but it just keeps failing.
The error code is: 80240020.
I have made sure that my laptop meets the specification, which is does, and also the disk space on my harddrive too.
I've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times.
Windows 7 Ultimate 64bit SP1
Intel Core i7-2600 CPU
16gb Ram
AMD Radeon R9 380 Series
Single monitor
Upgrade of Win7 HP laptop -- not usual failure code. Upgrade done through Windows Update (copy was reserved). Gets to 24%, restarts, bring up Recovery screen, fails with 0xc0000f -- a required device isn't connected.
Only one physical drive in the laptop -- works fine under Win7.
Have seen threads about problems with System Reserved being too small for Win10 (200MB for Win7 vs. 450MB for Win8). Tried shrinking C: and resizing System Reserved.
Repeats above problems -- plus, leaves laptop in weird mode with Win10 partially installed, a new Recovery partition, and nothing working (meaning, Win7 won't boot anymore).
Am now trying option of installing from DVD, after merging boot stuff into C: partition and removing System Reserved -- figuring that if Win10 requires a System Reserved partition, it knows how to create one the right size.
I tried updating my Win8.1 to Win10 twice.
The first time, it hung at 26% total, 89% copying files. Then it bricked my system completely so I made a clean install of Windows 8.1. There was nothing else installed than Windows & Updates.
Tried to update it with a stick made by the Media Creation Tool --> Stuck at 23%, 77% copying files.
I tried everything: Disabled Network Adapter, pulled all Cables (only mouse left) out, I also detached my second HDD.
I am trying to install Win10 on my SSD (Samsung 830 Pro, 130GB). I am running a Z77 Chipset.
I'd love to install completely new with the Image but that doesn't work because of the activation later on..
I'm stuck with a fresh Windows 8.1 install now, that's not really what I wanted. I'd love to update to 10 since I had it as a Insider too.
Have followed instructions & downloaded upgrade only to find every time it gets to 32% it fails & will not go any further, have done this four times outcome always the same, I have 74gb of hard drive free so there should be enough to accommodate the upgrade.
View 9 RepliesI have made 3 attempts at upgrading my Toshiba Satellite notebook from Windows 7 home premium to windows 10. Have tried both the upgrade sent via the Microsoft message and using the media creation tool. All 3 times it stopped in configuring devices at 38%, 47% overall progress. The setuperrlog.txt is:
2015-08-01 11:36:02, Error MOUPG CInstallUI::GetDefaultLanguage(1527): Result = 0x80070002[gle=0x00000002]
2015-08-01 11:36:02, Error MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
2015-08-01 12:34:18, Error MOUPG CSetupManager::GetDUSetupResults(4955): Result = 0x80070490
2015-08-01 12:34:19, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]
[Code] .....
How I should try to proceed?
Download of the installer fails 3 times with error 80240020 on Windows Update
System on Pc is Windows 7 Starter with update SP1 .Enough Ram 2G
how to solve this error, I have an asus p8z77-v lk mother board and an intel i7 32 bit processor. Windows10 seems to complete the installation then exits with the error "Does not support the processor configuration. error # '0xc1900101-0x30017' It then reverts back to win7.
View 1 RepliesI can't upgrade to windows 10 and it displays the message as in the attached image.
I have Windows 8.1
Just installed Win10 on a Win7 machine. Started it up and walked away.
Came back 3hrs later and all that was on the screen was this message:
Cannot Display this Video Mode. Optimum Resolution 1280 x 1024 60Hz
I can restart the machine and the normal Dell start up stuff happens. The Win10 logo comes up and then the screen goes black with the above message. No cursor. No nothing.
I cant even get the monitor settings to function once the black screen appears.
I can get into the monitor settings during boot up but cant make any changes before the black screen comes up.