Can't Enter BIOS Menu After System Image Restore
Mar 5, 2016
I have an Asus UEFI mobo on my custom-built desktop, a few months old.
B150M-K D3
It has American Megatrends firmware
Today I restored my system from a macrium reflect system image. I went back only 2-3 hours in time. After rebooting, windows started up fine. But the bios reverted to its default settings, although I had previously tweaked it a bit.
What's more, I can't get to the bios menu at all. I mash the delete key at startup, and I just see a blank screen. Even an hour later, just a blank screen.
This happened to me not so long ago, but that time, the bios screen did eventually appear, and with a little patience I was able to tweak the bios again. But this time it is more stubborn.
I also feel that the boot process is slow. I see the asus advert, and it coughs a couple times and drags on until I get to the windows boot menu where I choose if I want windows 10 or macrium reflect recovery environment.
I very often restore from a system image, and every time, it makes a new bios boot entry. I have dozens of boot entries by now in the bios boot menu. Maybe that's causing a problem?
The fan is unusually loud, although cpu usage is low, just 0-2 %
View 9 Replies
Similar Messages:
Sep 21, 2015
Windows 10 Home.
I created system image backup file at least once a week. I did one yesterday, and today I needed to run it to restore my system. To my horror, I cannot find way to run it. I ran system image backup restore multiple times. I know how to do it...... until today. Today, by the time I clicked Troubleshoot option, there is no Advanced Options to choose from. Instead it sent me to Startup Settings option where I could go to safe mode etc,
I ended up running a system restore. Good thing I do create restore point religiously. But, after system restore, I still have the same problem.......... cannot restore image by using system image backup.
adding............... I went to my other laptop running Win 10 Pro, I had no trouble running system image restore.
View 15 Replies
Aug 20, 2015
I created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.
View 9 Replies
Sep 19, 2015
A couple of days ago I made a system image backup (there were no error messages that it was unsuccessful), now I need to restore it, I boot Windows 10 DVD, point to a network location and start the restore, but after an hour or so, at the end it errors with "0x80070057: Parameter is incorrect". After that Windows boots to diagnostic mode but fails to repair anything. Diskpart shows that the partition which used to be C is RAW, I also have an impression that the order of partitions is different (C was 3rd, after restore it seems to be 1st).
I checked and I'm able to mount VHDX with C partition and access all files, chkdsk doesn't find any errors on it.
It's a UEFI computer with GPT installation. Is there some way to restore it with some 3rd party tool, or manually? What can I do?
PS: there's a lot of clues on the internet about fixing similar problem when such error popups at the beginning of restore from a USB thumb drive. The solution is to unplug the thumb before starting so the restore doesn't get confused with the additional drive. It's not the case here, I'm not using USB thumb and I get the error at the end of restore.
Update: I managed to restore an older backup of Windows 8.1 from before upgrade to Windows 10. I used Windows 8.1 DVD for the restore.
The difference between an old image and the new one is that after upgrade to Windows 10 I removed an optical drive and replaced it with a SSD which I was using for page file and ReadyBoost. Also, Windows 8.1 had 3 partitions, while after upgrade to Windows 10 I noticed that there's some additional 4th partition (so there were 2 restore or EFI partitions, not sure which), but the backup image of Windows 10 still consists of 3 VHDX files. The image of Windows 10 isn't an image made from a scratch - when I was setting up the backup I simply pointed to the old 8.1 image and Windows 10 was making its images on top of the old one (I wanted it to backup the differences only, to avoid huge transfer of the whole drive).
Anyway, as I already stated I'm sure that VHDX of Windows 10 isn't corrupted. It's probably some problem with XML metadata so the restore procedure can't recreate proper partition layout corresponding with images, or something. A
View 3 Replies
Jan 22, 2016
Question; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files from it. and the folders are there but I do not want to screw things up, as I don't know what I am doing.
View 9 Replies
Dec 23, 2015
I have entered BIOS many times but now I can not. Previously, tapping the delete key or F2 on start up would open BIOS. Now it will not I have tried many times. I have tried from restart as well as from shut down. I wish to change the boot order but am stymied.
View 3 Replies
Sep 5, 2015
After updating both of my Toshiba laptops when I first boot my laptops they show the Toshiba but I can't press F2 to enter BIOS.
View 3 Replies
Aug 20, 2015
when fast start up is activated, I cannot enter the BIOS by tapping a designated key .
If windows can be loaded, I may disable the fast start up, or simple click the Restart, then tap the designated key during next start up.
How do I enter the BIOS, when Windows cannot be loaded?
View 5 Replies
Mar 11, 2016
I've trying to update an Advent netbook to windows 10 from 7. It's been a hassle all the way with hangs on 'checking for updates'. However, I got through that but now it's stuck on 'Get going fast' screen.
I had selected 'use express settings' and now it's stuck on that screen. The mouse still works but nothing happens. I left it on all night. It's still on the 'get going fast' screen.
If I reboot (even remove battery) I get the initial advent boot screen but no bios info. Del, f12, f11, f2 etc do nothing. The blue 'win 10' logo appears briefly then back to the 'get going fast' screen.
I also tried the usb flash drive that had the old os on it but it won't boot from it despite that being the initial boot setting in the bios. Has win 10 bricked my netbook?
View 1 Replies
Dec 2, 2015
My System Specs: available
i cant find "UEFI FirmWare Settings"
View 4 Replies
Jan 7, 2016
I have a Linx 8 tablet running Windows 10, and despite several hours of web/forum trawling I cannot access my BIOS settings to view my boot manager, either through the Settings/Restart method, or in Safe Mode. I can get to a screen that lets me choose between either UEFI Settings or Boot Manager (by holding the power and the volume up buttons together at start up). Selecting the UEFI option takes me to the expected prompt, but choosing Boot Manager just starts Windows as normal. I simply cannot access my Boot Manager; I have disabled Fast Boot.
View 9 Replies
Aug 9, 2015
In case Windows fails to load, can you still enter BIOS in order to change boot device priority etc. Yes or no.
View 9 Replies
Apr 5, 2016
I just bought an ssd. i installed it then windows didn't detect it so i format it and everything now its working. So I decided to go into the bios to make my win10 boot off of the ssd then the hard drive as a secondary then i save and exit and turn my pc off to test the boot. i get a message saying change the boot device and when i kept restarting it it kept popping up. so i had to unplug the sata data on my ssd. not since its connected, win10 will boot off of the hdd. then i notice after i unplug it and turn it on it wont even give me an opportunity to enter the bios windows automatically starts up; there is no logo of my mobo brand with controls on how to enter the bios under it. i still press the button that would let me enter but nothing happens but win10 starts up. so after that i plug in the ssd and now its not detected and it wont let me format it as if its not even installed in my system! NOW I CANT ENTER THE BIOS AND A USELESS BRAND NEW 250GB SSD...
View 1 Replies
Aug 24, 2015
Installed Windows 10 on HP Pavillion p7-1262 about 2 weeks ago. Worked fine up until last Friday, screen went black, no keyboard entry, no mouse cursor. Can't enter BIOS. Whats wrong?
View 3 Replies
Apr 9, 2015
I installed windows 10 technical preview yesterday . I found a problem with system restore. It goes through everything normally but after it reboots I get an error. In the details it says:
System restore failed to extract the original copy of the directory from the restore point.
Source: %ProgramFiles%WindowsApps
Destination: Appxstaging
An unspecified error occurred during system restore. (0x80070057)
View 1 Replies
Dec 16, 2015
Maybe I have a misunderstanding of how System Restore works. Yesterday I uninstalled a program that I'd like to now get back. The company that made the program no longer offers archive downloads for that program in particular. Today it occurred to me that I could do a System Restore to when the program was still on this laptop & all would be returned as it was.
The first 2 times I tried was a total fail for returning the program but when I went back to a week ago it was there. Something is missing & it errors asking for the old install software that doesn't exist anymore (the program was purchased it 2008).
View 4 Replies
Feb 3, 2016
Recently I've changed my Mobo, CPU and RAM. Installed Windows 8 Pro Retail and upgraded to Windows 10 Pro. Worked perfectly and no problems
But I've noticed that if I need to restart the system I will get the usual Blue screen saying "Restarting", this will then goto a Black screen.
Nothing happens after the black screen, I never see my BIOS image or any text whatsoever (Which I usually see on a normal boot). IF I then press and hold the power button to force shutdown the computer and then press it again it will perform a normal boot, I see the BIOS Image etc.
View 7 Replies
Jan 28, 2016
Is it possible to restore a Windows 10 system image taken from a 60Gb SSD to a new 240gb SSD on the same computer?
I am thinking of using the windows 10 installation USB to boot then repair to recover the image onto the 240Gb SSD.
Would this work? Does partition size affect the new 240Gb SSD?
The system is already licenced for Windows 10 and nothing has changed other than the SSD volume size..
The VERY last resort is to install over again with all programs, tweaks, etc..but, I'd rather not.
View 5 Replies
Aug 19, 2015
How do I reinstall Windows 10 from a USB Disk Image
View 2 Replies
Jul 31, 2015
I completed upgrade from Win 7 to Win 10. So far everything seems to be working great. I have a Macrium image of my C drive with Win 7 on an external HD. Can I create a new partition on my C drive and restore my Win 7 image there? That way I can dual boot to either OS. I have done some research and it appears to be a relatively easy thing to do, even for a computer dummy like myself.
View 8 Replies
Jan 18, 2016
I have an unallocated 1Mb partition as the first partition (according to Easus) on my laptop drive, in addition to the recommended reserved, system and EFI partitions. Could this extraneous partition be the reason for my inability to restore from an image backup? (Restores fail after making my laptop unbootable)...
View 9 Replies
Oct 29, 2015
I Created an image backup using Windows 10. I burned the repair CD. I booted from cd. Options are most recent backup [but it only shows D:, the factory backup partition]. No browse capability. Other option does not let me browse to the folder the system created, "F:WindowsImageBackup". How do I restore from this image instead of the factory image?
View 8 Replies
Aug 5, 2015
I have 3 HDD's (2 internals (1 SSD 120 GB and 1 HDD-Sata 200 GB) and 1 external USB HDD (2 TB)). I have installed Windows 10 Pro x64 final οn the SSD 120 GB without problems and i have installed the extra programs that i use, also without problems. Then i decided to make an image backup to the external USB HDD. The image created succesfully. After that, i have removed the SSD 120 GB, installed the HDD-Sata 200 GB and tried to check to the HDD-Sata 200 GB if the Windows image recovery works. I used the Windows installation DVD and the external USB HDD to do the recovery.
The image recovered normally and the HDD works like as if i was using the SSD 120 GB. So my problem now is with the capacity of the HDD-Sata 200 GB which is shown as 120 GB. So any way to restore the capacity of that HDD again back to 200 GB? I don't want to format the disk now, just continue to use it as a backup disk just in case of failure of my SSD one. I know that i cannot use the HDD Capacity Restore Tool, because it is working only with 32-bit systems (which i currently don't have one right now) and even if i use it i don't know if it will restore my disk to full capacity but in a state that requires format from the begin (something that i am trying to avoid).
So in general, my question is how to restore the capacity of a hard disk after image recovery (when you backup to a new hard disk with capacity bigger than the capacity of the disk that i want to backup).
View 6 Replies
Feb 10, 2016
I tried one again to use Macrium to backup only C:, clean install then restore only C:.
Once again it did more that I asked it to and removed the 16MB partition created by the clean install.
After clean install I had this, 4 partitions on Disk 0 (SSD):
After restore I had this, 3 partitions o n Disk 0 (SSD):
I did not run the Macrium fix boot option after the restore so when I rebooted Win 10 ran Auto repair then the system booted up normally.
Why is Macrium doing this?
Guess I'll ask in the Macrium forum and see what I can find out.
The reason I'm doing this is is Shift Restart from Power is not working, it just boots normally.
I just redid the steps in Brink's tutorial to setup Recimage, then ran reagentc /setosimage /path "locationResetRecoveryImage" /index 1
I'll try Shift restart again now and see what happens.
View 9 Replies
Aug 13, 2015
Do i have to remove windows 7 from my computer before i can system image W10 ?
View 1 Replies
Sep 18, 2015
My windows is completely frozen. Key strokes don't work. The cursor moves around the screen but clicking things doesn't work. ctr+alt+del doesn't do anything.
When I shut down manually and restart the system stays frozen on restart. F-8 isn't working to enter safe mode.
How can I unfreeze the system, or how can I enter safe mode while everything is frozen?
View 9 Replies
