Display Monitor Setting Changes On Startup
Aug 16, 2015
I have a Toshiba laptop running Windows 10. My main display monitor is a LG 24 widescreen plugged into the laptop.
With Windows 7, I had no problems in using Fn key f5 to set the display to only the LG (showing as "CRT" on the screen). This did not change when I re-booted the laptop.
With windows 10, it reverts back to to the default setting and I get the laptop screen and the monitor lit up.. I frequently get a different resolution on the display too, until I open the laptop and re-set the display with the Fn key. This is annoying, as I use an external keyboard (which doesn't flip the Fn key) with the laptop lip down.
I've also tried via Control Panel (Display) but that doesn't hold the setting either.
View 3 Replies
Similar Messages:
Aug 14, 2015
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
View 1 Replies
Aug 10, 2015
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
View 1 Replies
Sep 26, 2015
I would like to make a global setting on my PC for ALL accounts. I have English (Australia) installed and also United Kingdom.
I would like to set this to my Current User setting but, as can be seen in the pic, it directs Windows to make any NEW user accounts to American display??
View 3 Replies
Aug 4, 2015
Using the same settings and programs as in my 8.1 installation. Nothing funny, or game-related running in the background (also tried disabling everything possible). The problem is that the monitor will not turn off, either from the Power/Display power-off options (nothing happens after set time passes), or with a program like ScreenOff and Monitor Off.
Using one of these apps, will start turning the monitor off, but it will turn itself back on automatically almost immediately. Something is interfering but I cannot figure out what. No security software installed (using Defender, tried disabling it). The only way this works as intended, is in Safe Mode.
View 9 Replies
Sep 1, 2015
I upgraded my Windows 8.1 computer to 10 over a month ago. Although I like Windows 10 a lot, there is a problem I've been having with the monitor not turning off automatically.
The display is set to turn off after 5 minutes of inactivity, but it never does. No matter how long I set the wait time. I set up a hot key to automatically turn the monitor off. It worked in 8.1 but in Windows 10 the monitor turns off for a half second and then turns right back on.
I did not change any hardware settings when I went from 8.1 to 10. I've tried unplugging various things connected via USB but nothing so far has solved this problem.
The monitor I have is the Dell E2414Hx 24-Inch Screen LED-Lit Monitor.
View 11 Replies
Aug 9, 2015
For the last 2 months since I got my new PC, I have been using my TV as a monitor for my PC. I had a few issues with resolution due to my TV overscanning the display but I used the resize feature in the NVidia control panel. However, yesterday when I downloaded Windows 10, it installed fine but when my computer opened up again it was trying to use my TV's native resolution which was a problem because of the overscanning. So I went to the NVidia control panel, and when I clicked the resize button (before choosing the new resolution) the TV just said it was receiving no input. Whenever I then tried booting my PC, it would display to my TV until Windows had loaded, then it would say no input.
The same thing happened when I connected to the TV through my motherboard rather than my GPU. So I spent ages trying to get it to work and eventually connected it to an old monitor. However the monitor only has a DVI input slot, which my GPU doesn't have, so I had to connect it through my motherboard and it worked fine. I then uninstalled all NVidia stuff from my computer, including the gpu from my device manager, and manually installed the new GTX 970 windows 10 driver from their website.
When this was done, I connected my graphics card to the tv through the HDMI, keeping the computer connected to the monitor through the motherboard. Both displays then worked as a dual display setup. However, even now whenever I try booting up my PC with only my gpu connected to the TV the same thing happens that was happening before and the TV will only display through the GPU when the motherboard is also connected to the monitor. I have ordered a DVI to HDMI cable so I can attach my monitor directly to the GPU, which will hopefully work, and then I will stop using my TV, but I would rather fix this problem and carry on using the TV until I can buy a better monitor.
View 1 Replies
Dec 20, 2015
I have three PC's all running the same OS setup but one no matter what I try after 2 minutes the display goes blank, move the mouse and the desktop is there! I found in link but for Windows 7 with the term called "System unattended sleep timeout" added to Advanced Power Settings" but cant find anything like this in Windows 10. And I do not know even if this feature is part of Windows 10 it could be something totally different.
View 5 Replies
Aug 19, 2015
Now have two 1" black bars on monitor. Am not a computer wizard - just switch and use ...
View 2 Replies
Aug 12, 2015
Today I upgraded to windows 10, and the first thing I noticed was that the display on my main monitor was out of bounds(1920x1080 btw). I know the task-bar and icons on the desktop are there, but they aren't in the frame of the monitor. My other display is flawless, but the main one isn't. I turned down the refresh rate from 60 to 30 on the main monitor, and that let me see everything on my desktop, however, there is a flicker when I go over stuff. Also, I feel that there is somewhat of an input lag with the mouse.
View 1 Replies
Aug 10, 2015
Since upgrading from Windows 7 x64 to Windows 10, my monitor/display on my desktop will no longer go to sleep/turn off after the scheduled 5 minutes. I had no issues with this in Windows 7. I have updated the BIOS, video drivers, USB wireless mouse driver and anything that could be related and no change. All i want is for the monitor to turn off after the set time. I don't use a screensaver. There is no driver update for the monitor (Viewsonic VX2450). I've also tried uninstalling the monitor driving and reinstalling but no change. Seems like the system also will not sleep when set to sleep.
View 3 Replies
Oct 10, 2015
i got my new Benq 2411z and its really nice, configured everything.But my problem is the following:
The monitor does not show the windows startup anymore, so i cannot see windows loading and cant access bios menu at start.
Somehow in device manager there is a non-pnp monitor listed which is listed as standard, if i uninstall or deactivate it, it does not affect my problem and its back after restart.
Furthermore i cant disconnect this non existing monitor via windows control panel.
I need to set the benq monitor (shown as monitor 2) as main monitor in windows 10 settings, but it does not change anything about my problem with the start up.
When i start the computer the displays says: "no device found"
When the computer booted and is finally on desktop it says: "input: dvi" and the desktop shows
Moreover my CCleaner says i have "microsoft basic display driver", but i have got a gtx980..
View 9 Replies
Dec 3, 2015
I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
View 6 Replies
Aug 15, 2015
Start up after installing Windows 10 and the final loading of start ups hangs up on NEC SpectraView II my monitor software color calibration as it continues to loop.
View 1 Replies
Nov 22, 2015
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
View 9 Replies
Nov 27, 2015
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
View 6 Replies
Feb 10, 2016
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
View 3 Replies
Sep 23, 2015
I am running Windows 10
MSI R9 390 GPU
AMD Catalyst version 15.7.1
Main monitor is CrossOver QHD270 via Dual Link DVI
Second display is a Vizio TV via HDMI/DisplayPort
So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.
View 1 Replies
Jan 1, 2016
I have three entries (among others) that are slated to startup when I logon. Each of them are featured twice in the start up tab of program manager.
On checking with autoruns I found that they occurred twice in the registry under
HKLMSOFTWAREMicrosoftWindowsCurrentVersionRun
and
HKLMSOFTWAREWow6432NodeMicrosoftWindowsCurrentVersionRun 14-12-2015 02:23
Is this normal?
My laptop is running windows 10 64 bit.
View 1 Replies
Jul 31, 2015
I am in the process of attempting to install Windows 10 on the system listed in my profile. I have downloaded Windows 10 as an ISO and transferred this to an NTFS formatted memory stick. The installation process works ok but I am having problems getting the SSD setup for UEFI mode and secure boot. what settings I need to apply under CSM to get the SSD running in UEFI mode? And if there are any other settings needed?
View 2 Replies
Feb 10, 2016
So at my work and home I have been setting up Bitlocker. Today at work I was setting up Bitlocker on a PC and we could not get a password for a option to unlock the device. The only option we get is to either use a USB or a pin. As per the compliance officer we have to require an encryption passphrase upon boot and I am not big on pins. How do I get my passphrase ability back?
View 6 Replies
Sep 11, 2015
So I thought I'd give Cortana a try since I can turn it off again if I don't want it, however I get to the point where it makes me login, I enter my email address and password and then it takes me to the next step where it tells me something like you need to enter your current password just one more time.
I enter the same password one last time and it tells me it's wrong.
I go through it all over again and reset my password and try again, go though the first login and get to the second stage where it asks me to enter my password one "last" time, and I do and it tells me it's wrong again.
Try a third time, this time leaving the password blank on the 2nd step and still fails.
Edit: I know the password is correct as I've used it to login to live this morning, so not sure why it's not accepting it in the 2nd stage of the Cortana setup.
View 3 Replies
Aug 13, 2015
I use a VPN and Cortana and the OS thinks I'm somewhere else. Is there anyplace to put a zip code to force the OS to think you're in a specific location?
View 2 Replies
Oct 10, 2015
I've been using Windows 10 set up exactly as I wanted it since my original installation. Today I wanted to set up Cortana. It was suggested that I use a PIN instead of a password. I thought this was just for Cortana so I agreed. Now my whole system has been changed. I have to log in with my Microsoft account which I never had to do and don't want to do. How can I get back to my original name with no long-in at startup.
View 9 Replies
Aug 23, 2015
What is the deal with windows and contrast? For many years windows has been lowering the contrast to the point that now with windows ten it is often impossible to see. The box I'm typing this in is basically invisible. The scroll bars are gone and I have to find them by waving my mouse around until I cross it. The selected link in my side bar is reduced to a then slightly grey line that simply cannot be located. This is just silly.
Is there any setting that can get some contrast back? And I don't mean the text contrast. I can read text fine. It is the controls, gadgets and highlighting that needs to be fixed.
View 9 Replies
Feb 6, 2016
I got a new laptop (Pavilion 17) and first time using windows 10.
Problem 1 - I originally had to turn on scrolling for the click pad which was yesterday. Now today scrolling was turned off and I had to turn it back on again. Stopped using computer last night while it was copying files over (via network). Computer was left open and running.
Problem 2 - This morning the network was completely disconnected and I had to go in and 'join the network' again. I did have to 2 this 3 times yesterday while I was using the computer as well.
Problem 3 - This morning all my windows had been closed? Explorer windows that were being used to copy and firefox also.
View 1 Replies
