I have installed windows 10 from windows 7 and now I have problems with my laptop keyboard, it affects all keys. The keys have to be pressed very slowly to work. I rebooted yesterday and it was ok for a while then the problem returned. It has taken me 6 minutes to type this in.
View 5 RepliesI recently upgraded to win10 and reformatted everything, since then all I have installed is this [URL] ..... (And of course chrome) ...
Now around a week after the install, this friday, what i thought was my keyboard holding down +, but even after unplugging it, it still kept going. After a restart it was gone, but only to come back after a couple of hours. Then saturday and today it has been delete thats being held randomly. I have ran Malwarebytes, Malwarebytes anti-rootkit, avast and avast anti-rootkit which all found nothing, I have also tried removing all my mouse and keyboard drivers, but it just keeps going. My keyboard is a Razer Black widow ultimate (2012) And my mouse is a Zowie FK1.
I have Windows 10 (upgraded from Win 7.1) installed on an iMac on a Bootcamp partition. When I was running Windows 7.1, all the function keys (to control brightness, volume, music playing) worked perfectly. Now under Windows 10 none of them work. And yes, I did go into the setup and try turning on and off the check box for whether or not the keys performed as Function keys with and without holding the FN key. If I go into Bluetooth devices, the keyboard is shown properly as an Apple Bluetooth Keyboard.
View 2 RepliesStarted experiencing this problem like 3 days back.When I click icons on the taskbar (including Cortana, Network, Battery, and Action Center) in Windows 10 Pro Build 10586 , the expected flyout does not open or sometimes it opens too slowly like 2 or 4 minutes after i clicked. Cortana is not at all responsive even after clicking...Start button is working fine right now but seems to have started a bit lag..
View 7 RepliesSometimes suddenly the keyboard behaves as if the Windows key is pressed, so when pressing "P" the window to choose the monitor opens. After a minute or so this behavior automatically stops and the keys can be used like usual.
View 4 RepliesAfter upgrading my Dell Inspiron 15 3521 to windows 10, my number keys stopped working.
I have updated the touchpad and keyboard drivers but they are still not working.
After upgrading my Dell Inspiron 15 3521 to windows 10, my number keys stopped working.
I have updated the touchpad and keyboard drivers but they are still not working.
i upgraded windows 8 to windows 10.now the mouse cursor and keyboard function keys is not working
View 3 RepliesHave a clean install of W10 and by the day it seems to get slower, if i open this pc or even another folder the progress/search bar takes ages to respond. also some programs cant seem to find relative paths set also takes forever.
i had this problem years ago with vista and cannot think how i solved it.
so far have tried virus scan, indexing on/off, sfc /scannow all to no avail, even though it is my older pc it worked perfect under W7. i only have 20gb on HD and std defender a/v
After installing windows 10 on my HP laptop PC, some keyboard keys have stopped working. The keys that don't work are: { 'escape' 'g' 'h' 'backspace' }. I am sure it is not a hardware problem because on occasion, all the keys that previously did not work, start working again. In fact, as I am typing this thread, my keys are working correctly. When they stop working, I try to uninstall or update the driver in device manager but that does not work. Keep in mind this started happening after installing Windows 10. I have not had this problem in Windows 8.1.
View 9 RepliesI was installing win10 on my pc with media create and got to the screen where it asks you for the keyboard layout. The computer does not respond and the hdd light stops blinking.When I kill the power and reboot, the computer loads properly into windows 7 desktop then says that windows 10 could not be installed and says this:
Error 0xC1900101-0x20017. The installation failed in the SAFE_OS phase with an error during BOOT operation.
I am past the "Working on it message". The system told me it was preparing the upgrade but this might take a couple of hours so sit back!! I now have a black screen with a blue window in the middle and the pc has frozen for 90 minutes so far. I have a Dell Studio pc with windows 7 home premium. The pc will not respond to any mouse clicks or keyboard strokes.
View 1 RepliesJust upgraded (via Windows Update) from Win 7 Pro to Windows 10.Upgrade generally went smoothly, but....My PC now shuts down very slowly and oddly. The screen and keyboard turn off normally, in a few seconds, but the system box (fans, etc.) remain on for about 2-3 minutes longer. What the system is doing while this is going on!
View 9 RepliesI have a new problem, and it is with keyboard input. I have to type very slowly to get my keystrokes to actually get entered. I need to hold down each key for at least one full second or press the key several times to type each keystroke. This occurs on all four keyboards I tried including a wireless Logitech that I'm using to type this. PC is Dell 560, OS Windows 10 Home. The PC is practically useless like this.
View 4 RepliesI'm facing a very weird problem with Windows 10 on my new laptop. Every time I boot up or even wake from hibernate, my keyboard repeat rate gets reset to the slowest setting. I notice this only when I start using word or email.
The weirder thing is, in the keyboard settings window the setting would always be shown as "Fast", but actually it would be slow. To make it fast, I have to drag it to slow and then to fast again.
i keep some rdp windows open for work all day and at some point the keyboard just stops working on the remote desktops, only the mouse works, to get it working again i have to close the rdp session and reopen it many times, sometimes even this doesn't work, so i have to reboot my win 10 and then it normally works. I must say that in all my years of windows 7 i have never had a similar issue.
View 1 RepliesI recently dual-booted my Windows 8 notebook with Windows 10. But the touchpad and keyboard won't work even after installing the appropriate drivers. This problem did happened before this in Windows 8 but solved by using Windows Update.My notebook is an Aspire E5-411-C4TN. I even downloaded Elan and Synaptics driver from Acer. Tried Googled around, found nothing...
View 1 RepliesI have a Dell XPS 17 laptop. Worked great under Windows 7. Tried Windows 10 but was unable to get the wireless LAN driver to work, so I went back to Win 7 via the official "Go Back to Windows 7" option in Windows 10 - now the keyboard and mouse won't respond after start up. They work fine in the bios, but are completely unresponsive on the login screen - even when I boot in safe mode. No USB ports work, so I can't try another keyboard/mouse. Was going to reinstall but I'll lose the existing data. Now I'm going to have to pull the drive and copy over manually, then reinstall. Last thing I was going to try was disabling EVERYTHING in the BIOS just in case there was some kind of weird IRQ conflict, etc.
View 1 Repliesturned my computer on yesterday and it loaded up fine, apart from there was no cursor and my keyboard wouldn't work. I have a R.A.T. 5 mouse and a Coolermaster QuickFire keyboard. I know that they're on and working because their LED's are on. I decided to plug in my old ps2 keyboard and restart my PC to enter BIOS. I checked and it recognises that the keyboard and the mouse are connected into the USB hub and says they're working. Another thing, even my ps2 keyboard doesn't work when my computer gets past the start screen!
View 1 RepliesI just went from Windows 7 to 10 and now my USB keyboard and mouse are unresponsive.
View 5 RepliesHaving recently got Windows 10 what ever I press comes up element not found . And browser home page reads something went wrong try again...
View 1 RepliesStart button, keyboard windows button and Microsoft Edge do not work any more.
View 9 RepliesI have two desktops using a single keyboard, monitor and mouse via a KVM device. One desktop is running Windows 7 but I've just upgraded the other from Windows 8 to Windows 10.
All was 100% well on both machines before the upgrade. The Windows 7 machine is still fine (as you'd expect!) but on the Windows 10 machine hitting the key on the keyboard has no effect whatsoever. On Windows 10 set up I chose "UK keyboard" as usual; I think I've always done whenever I've loaded any version of Windows.
(The sharper ones amongst you will have realised that I'm typing this on the Windows 7 machine!!!)
I recently tried windows 10... didnt like it. Did the recall back to windows 7 option. Let it do its thing. Came back and my computer was trying to rapair itself... said could not reboot windows is checking for a solution.. I let it go.. it said no solution found. And just turned off..So I restarted spammed f8. Tried to start in safemode.
Got to password screen and mouse and keyboard won't work...So I restart, spam f8 again. I select repair windows this time, cancel the repair process then clicm.advanced options. Try to look at restore points... and it says none exist... that is bs. I did restore points twice a week. when. I try to start normally it loads her goes to a blue screen with tons of writing and letters and errorrs but no time to read any...
I'm guessing it doesn't recognize the 10 drvers. And without the keyboard I can't log in because I have a password. Keyboard does work in bios though but not in safe mode.I really don't want reinstall and lose all my data
View 1 RepliesMy mouse and keyboard (both are USB) don't work, but they are lit up. I tried replugging them, but that doesn't work. I tried using F8, but that doesn't work. I also don't have a PS/2 port, as I am running BootCamp on a Mac. I even tried using the Apple Keyboard.
Before this problem, I had issues with BAD_POOL_HEADER (BSoD) on Windows 10 after updating drivers. Checking if I had any system restores, it didn't have any that I made before the update. So, I reset my computer, with all files intact. Then my problem arises; keyboard and mouse do not work, and I'm pretty much stuck on the login screen.