Mastercook 15 not Compatible Windows 10 ver 1511 bld 10586.11 ... Since update Mastercook 15 fails to print. Windows error and program shuts down. Contacted Mastercook support and this is apparently a windows compatibility problem now. Note when using Mastercook 11 when trying to print receive error can't locate print drivers.
View 4 RepliesI received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
Ever since i upgraded to windows 10 pro, ive been unable to print because whenever i press ctrl-p, in any program like word, excel, pdf viewer, anything the print dialog doesnt show up, instead the cursor changes to the busy sign and it just freezes there. i have to manually close the app via task manager. However, I've noticed on one occasion that if i wait really really long ( > 15 min) the print dialog eventually pops up. ctrl p works in chrome, but when it loads the default print dialog the same problem repeats.
Using system spec:
Item Details
Windows: Windows Version 6.2 (Build 9200)
Internet Explorer: 9.11.10240.16384
Memory (RAM): 8112 MB
CPU Info: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz
CPU Speed: 2499.4 MHz
Sound Card: Speakers (VIA HD Audio) |
SPDIF Interface (TX0) (VIA HD A |
[Code] ....
After installing visual basics dlls.. After some minutes my windows Explorer started showing error.. This file does not have a program association with it for performing this action. Please install a program or l, if one is already installed, create an association in the default program control panel.. . This error pop ups whenever i tries to open Explorer directly from Taskbar. ..
View 1 Repliesthere doesn't seem to be a way to print a standard 6x4 photo using the Windows print function for pictures. how to do this as it was possible on earlier versions of Windows.
View 3 RepliesI have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
This issue's surfaced for me since this morning. Whenever I put Windows to sleep, either manually or closing my lid, it shuts down the instant I start it back up.
View 4 RepliesI have a home build desk top and upgraded to MS10 when it came out. Very few problems. Was printing ok and them all of a sudden when I try to print a photo from the computer I get a error code -20. I have googled error code -20 and mainly come up with companies wanting to sale their fix all software.
View 3 RepliesCannot upgrade to windows 10 from windows 7, Fails at 25% with error 0XC1900101 - 0X20004. How can I get around this error and what is causing error.
View 3 RepliesI guess the title says what my problem is. So, I finaly got to install KB3081444 without any issues, and now, this update is doing infinite restarts on Windows Update. I tried:
1. Installing from offline downloaded installer - the same error code.
2. Did DISM, both commands failed.
3. SFC says no issues.
Windows Update files will be shortly.
I attempted to update my desktop with Windows 10 x64 build 10240 to 10586 using the ISO. The update gets as far as the second section and stalls at 32% - I left it for hours with no change. Fortunately powering off the system resulted in 10240 being restored. After the system booted to the desktop the error 0x1900101-0x30018 was given as the reason for the update failure. I'm not sure how to proceed. I've been able to install all other updates since the release of 10240 and the system has no issues with hardware or drivers as far as I can tell. I also have a laptop running identical security software and it updated to 10586 without incident.
View 2 RepliesNVIDIA driver update for NVIDIA GeForce GT 620 fails to update in Windows 10 - Error 0x80070002 - After upgrading, I lost my 2nd monitor.
View 2 RepliesThis problem happened for me last week but after a system restore it was seemingly fixed. After having to restart my computer again however, it's come back: every time I put Windows in sleep mode and turn it back on, it instantly shuts off. Not even a blue screen, it just turns off before the screen has a chance to even turn on.
View 1 RepliesI have tried and tried to upgrade from WIN 8.1 to 10 with no success.
The error that comes up is "0x80070004 - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."
I have removed all 3rd party antivirus, and a bunch of other fixes. A
Download of the installer fails 3 times with error 80240020 on Windows Update
System on Pc is Windows 7 Starter with update SP1 .Enough Ram 2G
I had upgraded from W8.1 and Windows 10 was activated. I was under the impression that I didn't need a product key and that my PC would be recognized after doing a clean install. Now I have W10 installed fresh, but get the error code: Error code: 0xC004C003
View 9 RepliesAlthough I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 Replieshow to solve this error, I have an asus p8z77-v lk mother board and an intel i7 32 bit processor. Windows10 seems to complete the installation then exits with the error "Does not support the processor configuration. error # '0xc1900101-0x30017' It then reverts back to win7.
View 1 RepliesI can't print due to the "print queue full" error.
I have uninstalled an re-installed my printer drivers several times and had no luck.
Printer says its ready but I cannot print from any application. Printing troubleshooter finds no problems.
Upgraded to Windows 10 about three days ago, and now my HP Laserjet P1006 printer won't print.......keeps saying "error" .Went to HP's website and down loaded what I thought I needed to get it to print but still not printing.
View 9 RepliesExactly as it says on the title. When I power it on, the GPU fans go full blast, it stays that way for a little while and shuts down automatically. There's no splash screens or anything either so I can't go into safe mode. Sometimes it shuts down almost immediately and then starts up again by itself. Sometimes it seems to start fine, the fans spin at their usual speed, but nothing appears on the monitor and eventually it just shuts down again, it's not properly booting up though because my drawing tablet's lights don't go on when I plug it in.
All this after the latest update. I restarted the thing so it would install the updates, but it got stuck on "Restarting" screen with the dot things spinning. I left it for several hours until I forced the shutdown and it has done this stuff since. I do recall the task manager not starting up from the security screen though.
What I've attempted so far:
Taken the battery and power cable off and held the power button for atleast 2 minutes.
Taken the second graphics card off. And reset the battery again.
Left it overnight like that to see if it would actually do anything (As if).
Started it up without the battery.
Tried to get into safe mode, nope.
I was using Windows 10 from Last 2 months . Yesterday I did a clean install of windows 10 .everything went well. But now when I try to shut down or restart , windows shuts down. display goes off but laptop power doesn't. Fan and all power indicators stay on.
{I have tried setting the BIOS to default settings. No solution.)
I am using Lenovo Z570(corei5, NVidia 520m)
I have windows 8.1 installed on my laptop and when I try to upgrade to windows 10, it overheats, shuts down and when I restart it, goes back to windows 8.1.
My fans are clean and everything works just fine with the laptop, I don't understand why is this happening. I also have a friend with a similar laptop model who is having the same overheating problem when upgrading to windows 10 (in his case, from windows 7).
I've successfully updated to Windows 10 on my two Surfaces, but there is some kind of issue on my desktop PC. The upgrade process from Windows 8 fails at about 71% total (Installing features and drivers at 91%), and the error I get is:
C1900101-40017 Windows Update ran into a problem.
When I click on "Get help with this error" I'm directed to a page with some general troubleshooting with Windows Update. I've run Windows update repair tool and it fixed some issues, but the installation failed again.
I have now tried freeing up more disk space which I admit was a bit tight and I'm preparing to run the update again. Still, I'd prefer if there was a more detailed error message or a log file where I could see what exactly went wrong, but there are no indications where I might find one (either in the error message, the troubleshooter, or Google). As it is, I'm shooting blind here and this will now be my fifth upgrade attempt.
I have just built a new gaming PC and everything works fine, windows installed correctly, all drives are recognized programs are installed etc.
But I have a small problem... When I shut down, power off and leave my PC for a while, upon startup, windows wont boot. It goes onto the motherboard screen and then says ''starting automatic repair''. It gives me a list of options, and the only option which gets me back to windows is to restore to a windows recovery backup which I created. Every time I shut down, I have to restore and then add a few programs that got removed which is very annoying.
The PC is stable and all my programs which are installed are working fine, but for some reason, it enters this recovery mode when I start up from a shutdown.
I am running windows 10 64bit, my motherboard is an Asus VII Hero and I have installed all the drivers which are needed along with a few programs. I am thinking I may need to do a re-installation of windows, would that fix the problem?
When I download a pdf file from another source and view using Windows Edge, there's no way I can find to print it. No menu or file box. When I right click there's no print prompt.
View 2 Replies