The time i have installed windows 10 my wifi & audio started creating some problems. Everytime I switch on me laptop i have restart it again to connect it to a LAN or a network & the same thing happens with the audio too, it automatically gets disabled & to enable it i have to troubleshoot the problems to fix it.
View 1 Replies
Since I upgrade to Windows 10 (coming from 8.1) in my friend's Dell Optiplex 3011 All-In-One computer, with built-in speakers, the audio has been disabled, and I see the Windows speaker icon is with an "x". In Windows 8.1, the audio was working normally, so it's not a hardware issue.
However, if I plug in an earphone, the audio output is enabled and the Windows speaker icon changes to normal one. I installed the latest version of Realtek HD Audio driver (R2.79), and restarted, but the audio continues disabled unless an earphone is connected.
I first upgraded to Windows 10 and installed the Realtek audio drivers. Then, I performed did a clean install and installed the Realtek audio driver again, but audio is still disabled. When I open the Realtek Audio Manager in Control Panel, only the microphone tab appears. When I plug an earphone, the speaker/earphone tab is visible as it should be, disappearing after I unplug it.
I reinstalled Windows 8.1 in his system hoping to have audio working again, but the problem persists. I've tried installing the Realtek HD Audio driver from Dell supporte page for my product (entering the service tag to be 100% sure), but no luck. Windows troubleshooting is useless as usual, only asking me to plug in an earphone, like I didn't know it. I even upgraded Dell BIOS/UEFI firmware to latest version (A07), but it didn't fix anything.
Info:
System: Dell Optiplex 3011 All-in-One
OS: Windows 10 Home Single Language
Realtek version: R.279
I have a Windows 10 server with an incoming VPN connection created. Right now it specifies a range of IP addresses for the client to use. The alternative is to set it to have your DHCP assign the client's IP address instead. This is what I would like to do, but when I set the connection to ask like this, clients can't connect. On iOS and OS X they both say that they both cannot establish a connection to the VPN server.
My purpose for doing this is to allow all the clients to still browse the internet while connected to the VPN, which normally they cannot do (even when setting to send all traffic). I have to specify the DNS (my router's IP) on each computer, and on iOS this isn't working/possible.
After updating from windows 7 to 10 I faced a problem, my laptop's wifi does not auto connect when i turn it on, instead i have to reset my wifi adapter to connect to my wifi, this was not an issue on windows 7. My drivers are all up to date i even tried to reinstall them but still no result. It feels annoying to reset my adapter all the time when i turn on my laptop
View 2 RepliesThe generic PnP monitor driver in the device manager keeps reenabling/reinstalling itself whenever I restart Windows 10 on my early 2011 MBP (Boot Camp). I want to leave it disabled so the brightness controls on the keyboard work, otherwise they don't.
I do not want to disable automatic driver update checking by Windows 10. I know that if I turn off automatic driver installation via device installation settings and enabling "Prevent installation of other devices not described by other policy settings" will keep the "Generic PnP Monitor" driver uninstalled, and this is certainly one solution that works, but disabling these features interferes with the installation of other devices (one example is the TAP driver for the Private Internet Access Windows client).
There is no available apple display driver I can install over the generic driver that I have found, but the brightness controls work perfectly when the Generic PnP driver is disabled/uninstalled. I just wish it'd stay that way after a restart.
My computer just won't sleep for longer than 15 minutes, I've disabled wake-timer in the advanced power options. I also disabled my keyboard, mouse, network, adapter, and everything else in my device manager that could possibly be waking my computer up without me wanting to do so. I also checked my cmd logs for devices armed to turn my PC on.Checked the Event Viewer aswell but in the log it says whatever keeps turning my PC on is 'Unknown'.
View 1 RepliesThe internet functionality works fine on his PC after upgrading from Win 8 to Win 10, though there is one problem that we cannot seem to figure out. Whenever the computer is restarted, it somehow cannot connect to the internet. This is especially weird because it will connect after being booted up from a full shutdown.
I should also mention that this is connected via Ethernet cable, not WiFi.
I've got a little issue, whenever I plugin headphones (usb) I dont get sound and the sound is still going through speakers, I didn't had problem with this until the latest update on Windows, its really annoying cause everytime I want to switch to headphones I need to restart my PC. Yes I checked sound settings, the headphones are there when I plug them, there's just no sound.
View 2 RepliesI recently upgraded to windows 10 from windows 7 and have been encountering problems since then.When I try to access any website using my mobile's hotspot all the browsers except firefox show the same message that is "Can’t connect to the proxy server".
So I went into proxy setting and saw that whole area was grayed out and at the top was a message saying "Some setting are managed by your organisation ". The first option in proxy settings is "Automatically detect setting" and it was turned on but because it was grayed out, I couldn't change it.Then I typed internet options in the search bar and clicked on it and a dialogue box appeared and in it I click connections tab and right at the bottom was a message saying "Some settings are managed by your system administrator.
I went into LAN settings and there too everything was grayed out and the automatically detect settings box was checked here too.This problem is not confined only to browsers but my in my Steam account I cannot update my games and also when I try to access news from the steam client it gives and error code.I did a bit of research about that code and found that it was related to proxy.Even my windows update is not working. Every time I try to update it it just stucks at 0% for hours.
My windows 10 laptop acts really weird with the the audio devices. I am using a tascam audio card for some audio editing and the internal realtek for everything else. Since i installed windows 10, the audio playback will stop whenever i am playing a game or talking on skype. It might do it or might not, but it happens everyday usually about 20 minutes of using the computer. Then, i have to restart the laptop so that everything goes back to normal. Thats it, the sound stops, and i have to restart.
I am attaching a DXDiag here.
------------------
System Information
------------------
Time of this report: 12/17/2015, 16:00:35
Machine name: GEORGEK-PC
Operating System: Windows 10 Pro 64-bit (10.0, Build 10586) (10586.th2_release.151121-2308)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Inspiron 3543
[Code] .....
Is this strange. When I change my desktop wallpaper on one PC it changes to the same picture on my second PC. and I haven't even downloaded the wallpaper on the second machine.
what is going on?
How do I automatically mirror files from a hard disk drive to a network folder?
In this case I want to mirror the contents of an entire disk containing photos (no system files) to a shared folder on an OpenMediaVault server running on my home network.
This is separate from the regular backup of the rest of my system which is done with backup software. For the contents of this disk, I don't want them compressed into a backup container file. I want them to be exact duplicates of the original files, kept up to date in that shared network location (login required).
Also, it doesn't matter if they update in real time. Once a day is fine, for example.
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
Can see the hot spot but when try to connect comes back with can't connect to this network
View 1 RepliesI started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
I have a Windows 10 Pro 64bit box as my NAS
Storage Spaces, ReFS, 2 drives mirrored
HomeGroup
HDD sleep on idle
Hibernate/Sleep disabled
My problem is when I typically save or open a file with the Windows file dialog on any Windows 10 machine, and I try to go to that machine through the network path //MyNAS/MyFiles, it initially gives me a cannot connect or find error.Is this due to the dialog not waking up the drives on the NAS? Something is obviously asleep here, and I usually end up opening Total Commander or Windows Explorer to "wake up" the connection and then everything works. I don't mind waiting, but I'd like the dialogs to hold tight until it connects, not give me not found or cannot connect.
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035
the network path was not found
upon clicking troubleshooting the problem says
the remote device or resource wont accept the connection..
I have a Dell Latitute E5530 laptop that won't connect to my secured home SSID. I have 2 other laptops connected to it wireless, plus phones, plus 2 TV's (via a Roku and a Chromecast). I thought there might be a limit to what I can connect (i.e., 5 devices), however I brought home a 2nd laptop from work and that connected with no issue while the Dell Latitude still cannot. I don't even get the option to type in the Password Key, it simply says "Cannot connect to the network". I'm able to connect to an unsecured network with this same machine, no problem. I've tried reset the network adapter, I'm just stumped at this as to why this computer won't connect.
View 3 RepliesAfter kb 3081449 update i can't access internet.trbl info is
"windows couldn't automatically bind the ip protocol stack to network adapter."
I have updated Ethernet adapter and have latest wireless adapter.
How do I connect to a shared network drive I have setup on my Windows 2012 R2 standard server at home, from my Windows 10 pro laptop is at work?
Do I have to setup a vpn on windows 2012 server and connect to it from my laptop?
I have 2 new PC's set up and running, connected to a NAS via a Switch. Internet is available via a router.
I need to be able to access folders on and from both machines. I have shared C: on both, given permissions on both (everyone = Full control)
I can see the relevant machines in the network section of Windows Explorer (master & backoffice). Sometimes I can see C: on the other machine but I can not connect to it. If I Double click I get "path not found" error ( 80070035 I think )..... masterc
If I type in using the IPaddress it connects and works fine.... 192.168.1.69c
It seems that once I've used the IPaddress method, it can sometimes use the name method ( But this is hit and miss )
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom
Model Number F@ST2304
Firmware Version 7.16a4N
ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
Nov 7 15:09:11 (none) user.alert kernel: Intrusion -> IN=pppoa0 OUT= MAC= SRC=136.159.181.168 DST=2.125.174.9 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=40139 DF PROTO=TCP SPT=45482 DPT=23 WINDOW=5840 RES=0x00 SYN URGP=0 MARK=0x8000000
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
My aunt did the free Windows 10 update from Windows 7. After the update she had no internet connection so she decided to roll back to Windows 7. After the roll back, she still has no connection. Her connection icon says "unidentified network" and will not connect to the internet. It is plugged directly into the modem.
View 5 Repliesyou could connect to an hidden wifi network? or it's just my laptop?
View 9 RepliesI'm running WiFi on my desktop since a couple of months but tonight(since 2 days ago) I suddenly "can't connect to this network". I live in an apartment building for students and we share a Wi-Fi connection in the house. I've asked my neighbor and her connection works.
My smartphone can connect to the network as usual, my chromecast can connect but not my PC.
I run win 10 and use an ASUS PCE-AC68 network card.
ATM I'm connected to my smartphone hotspot so it seems like there's nothing physically wrong with my equipment.
Smartphone connected to the wifi network
Full signal can't connect!?
Desktop can't connect
I think I've tried all the obvious stuff. Checking for new drivers for my ASUS card, firewall is completely off, telling Win 10 to forget the connection and rebooting, waiting... I just get that annoying message "can't connect to this network" "close"...
Here is a wireless network report(netsh wlan show wlanreport) ....
I recently upgraded one of my laptops from Win7 Pro to Win10 Pro. Ever since then it has been taking a much longer time for the laptop to connect to either of my home networks (two different homes). This is with either WiFi or Ethernet.
When it was running Win7 it would connect to either home's network in a few seconds. Now it usually takes over a minute, as much as two minutes. Once it does connect everything works fine.
