Networking :: Driver Support For PCI Network Adapter

Oct 21, 2015

I recently bought a TP LINK TF-3200 card because my Lan port got fried :P. But, it id getting detected but is not working as I am not able to find new drivers for it.

View 8 Replies

Similar Messages:

Networking :: Realtek RTL8723BS Does Not Support Hosted Network

Dec 13, 2015

I am trying to start a hosted network on my Windows 10 system, but every time I got something like "The group or resource is not in the correct state." I then ran "netsh wlan show driver" and see that it is using a Realtek RTL8723BS driver which says it does not support hosted network. I also don't see any "Microsoft hosted network virtual driver" in my Device Manager, even if I turn on the showing of hidden devices. Does that mean there is no way I can get a hosted network to run on this device? Is there some way I can get the driver to support hosted network? (I already updated to the latest version of the driver and rebooted, and that did not work).

View 9 Replies

Networking :: Wireless Network Adapter Disappeared After Upgrade

Aug 8, 2015

So after 2 failed attempts at installing Windows 10 on an Acer Aspire Z5801 PC, I finally managed to succeed. However, a new problem appeared after installation.The Wireless network adapter went completely missing. Windows does not detect its existence at all, it's like the PC doesn't have one installed. It doesn't appear in Device manager + isn't listed as an "unknown device". It's simply not there at all.The wired network adapter is there, but not wireless.

Installing the driver from Acer's website - I had to select Windows 7 64-bit as the version is all that's available for my adapter.I used a USB stick to transfer the setup files to the Acer PC. It said it successfully installed but still didn't appear, even after a reboot.Used a USB wireless adapter (Netgear) to see if it was an issue with how Windows 10 handles Wi-Fi - nope, that installed and worked fine.Scanning for Windows updates after using the USB adapter. Some updates were found and installed (no driver ones though), but still no Wi-Fi.

In the end, I reverted back to Windows 7 and what do you know? The adapter got recognised again.The USB adapter isn't a viable solution since it's required by another PC. I just used it for testing purposes.

View 9 Replies

Networking :: USB Wireless Network Adapter - Connection Unstable

Oct 6, 2015

I recently brought a new wireless network adapter for usb (Asus usb N14) and since I've started using it the connection is really unstable, I'm on the same connection on my iphone and it's just fine but on my pc it's really struggling, I've ran speed tests and it'll work fine when randomly it'll just go down, I'll still be connected to the router but have no internet. Right now looking at the wifi graph in task manager it literally going straight up for a few seconds then straight back to 0 when downloading a file, and I'm unable to download any large files because it'll just fail after about 30 seconds.

I've updated it to the latest version with no change in performance or reliability. One other thing I'm at Uni so other people will be using the connection and I've no access to the router unfortunately.

View 1 Replies

Networking :: Microsoft Hosted Network Virtual Adapter Is Missing

Sep 12, 2015

I cant create a virtual wifi network using this command : netsh wlan start hostednetwork (the "set" command works)

the solution is to enable Microsoft Hosted Network Virtual Adapter which is missing , and yes i tried to show hidden devices ..

View 3 Replies

Networking :: No Network Adapter Detected - Deep Sleep Mode

May 5, 2015

I decided to take the plunge and install win 10 on one of my machines. Used windows update to install build 10074 from windows 7.

Everything seems to have worked fine except my network adapter (onboard Realtek thing) isn't being detected.

Figured this might be a driver thing so I installed various versions of the realtek drivers both win 7 and win 8 ones and these seem to install fine but then cannot detect the card. The installer gives an error that the card may be in "Deep Sleep mode".

Once installed the Device "REaltek PCIe GBE Family Controller" appears in device manager with no issues or conflicts, but nothing is in the Network Connections window when I go through Network and Sharing centre.

I have tried booting to the trouble shooting menu and selecting load unsigned drivers but this has not worked.

I rolled back to Win 7 and the card came back and all connectivity was restored. Re-installed win10 and back to the same issue.

View 9 Replies

Networking :: Wired Network Adapter Is Not Showing After Automatic Upgrade

Sep 15, 2015

I have DELL Inspiron 14R N4010. Automatic upgraded to Windows 10 Home. Previously I have Windows 7 Home Premium. After upgrade I didn't see the wired network adapter. However my wifi is working fine and can access Internet. I tried to re-install the LAN driver (Atheros AR8152 PCI-E Fast Ethernet Controller Driver); it ask for upgrade/repair/de-install means driver is already present in the system. In spite of that upgraded the dirver (got the upgraded driver setup from Dell). Unfortunately, the device is still not visible in device manager.

View 4 Replies

Networking :: Network Driver Stopped Working

Oct 5, 2015

i have a killer e2400 network adaptor over a wired connection on my msi motherboard. Unfortunately, out of the blue it has stopped working. I constantly get the error message "Ethernet doesn't have a valid IP configuration." I have tried a number of things such as stopping and restarting the services in computer management. Nothing appears to work. I know my router works as I'm using it now on another computer.

View 2 Replies

Will AMD 15.7 Driver Support 1280x1024 Resolution

Aug 16, 2015

i would want to know if i should upgrade to win 10 since only drivers that support win 10 are amds 15.7 drivers and i dont plan on upgrading my monitor.

View 1 Replies

Networking :: How To Get PC To Support Miracast

Jan 9, 2016

So I just got a new LG smart TV that has a screen share mode. I wanted to use it but apparently my PC doesn't support miracast.

How do I get miracast support? I'm sure all my drivers are up to date, but i'll check again. Here's my dxdiag, I couldn't get much info from it. I'm not sure why it's not supported, and I don't have much knowledge on the issue.

I can get the TV to show up in Devices under settings, but I can't project to it. Does my second monitor have anything to do with it?

View 9 Replies

USB Wireless Network Adapter

Oct 22, 2015

My Dell laptop which is windows 10 only has a chronic problem with the adapter constantly needing to be reset. Searching for similar problems led me to the possibility of a USB adapter.

View 1 Replies

Network Adapter Is Missing - No WiFi

Sep 19, 2015

Whats going on with my tablet (WinBook). I've installed W10 few weeks ago since then never had any problems with it, but today I noticed I cannot connect to wifi. it's gone from Network settings, if I open "connection" icon on task bar I only see Airplane mode..Network adapter from Device manager is also gone. What to do now...

I did try this - connect to internet via Bluetooth from Lumia phone and with Intel Driver Update Utility scanned tablet, only thing it found is update for Graphics driver.. what else can I do?

View 11 Replies

Networking :: Support For Reverse Tethering Via Bluetooth?

Nov 18, 2015

I know that you can use Linux to connect to Internet via bluetooth on your Android phone, and it runs smoothly, more less, but Windows seems to be far more problematic when it comes to this. Is there such a possibility? And if so, how?

View 4 Replies

Drivers/Hardware :: Must Reinstall Ethernet Adapter Driver After Every Restart

Oct 1, 2015

I recently upgraded directly from Windows 8.1 64-bit to Windows 10 and I am having some problem with my Ethernet Adapter. My Ethernet Adapter is a Killer e2200 Gigabit Ethernet Controller, which is built in to my motherboard (MSI Z87M GAMING). When I first installed Windows 10, I found both a software suite and just the drivers themselves on the Killer website. I first tried the whole suite, but it didn't really work very well, felt unnecessary, and basically didn't seem to actually install any drivers. I then used the actual .inf file for my Ethernet Adapter to install manually. I uninstalled the driver and software, and then installed the driver manually through Device Manager by saying "have disk" and navigating to the folder and selecting the .inf file I downloaded. This works, but I have to repeat the process of uninstalling and reinstalling the driver every time I restart Windows.

There are additional variables that could also contribute to the problem. I am using one of those adapters that plug into the electrical outlet to extend the Ethernet line to reach my basement. I don't know if this really should have any effect on my problems, but I figured I should mention it. The product is made by TP-LINK. I also have VPN software on my computer, and part of running the VPN software is having it install a "TAP-Win32 Adapter V9" driver under Network adapters in Device Manager. This could be contributing to my problems, but I do need to have access to my VPN. I did not experience this problem at all under Windows 8.1 using the driver install disc that came with my motherboard.

View 2 Replies

Network Adapter Missing After Automatic Update

Jul 30, 2015

I have updated to windows 10 automatic update , Every thing working fine except network adapter. Network adapter is missing , i can see realtek device in device manager, Mine is Dell CPU.

View 19 Replies

Always Loses Connection And Network Adapter Fails

Mar 25, 2016

This is all after upgrading from Windows 7 three days ago.

After two days of enjoying Windows 10, my internet just started going out. The pc would freeze for a sec and then id get a red x in the bottom and my wifi would be gone. In device manager, it always shows my wifi network adapter operation was unsuccessful. I switched to a different adapter and installed the latest drivers, which say are compatible with windows 10, and the same issue still happens. I also tried some CMD command I found online related to old VPNs and that didn't work.

Usually it only fixes if i unplug and replug the adapter. Disabling and enabling doesn't work. I repaired winsock and renewed tcp/ icp and that didn't work.. What can I do? I cant go 20 minutes without losing internet.

View 14 Replies

Disabled Keyboard / Mouse / Network / Adapter

Sep 23, 2015

My computer just won't sleep for longer than 15 minutes, I've disabled wake-timer in the advanced power options. I also disabled my keyboard, mouse, network, adapter, and everything else in my device manager that could possibly be waking my computer up without me wanting to do so. I also checked my cmd logs for devices armed to turn my PC on.Checked the Event Viewer aswell but in the log it says whatever keeps turning my PC on is 'Unknown'.

View 1 Replies

WiFi USB Adapter Not Showing In Network Connections

Sep 2, 2015

Ok so got a new usb WiFi adapter. I installed the driver first which I downloaded on my phone then transferred to my pc via usb cable. Have tried reinstalling multiple times, still won't work. I'm guessing the problem is there's no win 10 drivers for it. NOTE: I did have a old usb adapter working with no driver before but not even that's working even with drivers uninstalled. The new adapter shows up in device manager with a problem indicated with a code 10.But not in network devices.

View 1 Replies

Network Adapter Causing CPU Usage Spike

Jun 17, 2015

I'm using a Linksys AE2500 network adapter on Windows 10 technical preview and when ever the adapter is plugged in, my CPU usage nearly hits 100%. I've checked for malware and that doesn't seem to be the problem.

View 1 Replies

Network Sharing Not Working Properly - IP Address Already Assigned To Another Adapter

Sep 16, 2015

I have a problem with Windows 10 Network Sharing feature. It assigns fine the IP address 192.168.137.1 to the network card that acts as the bridge to connect other computers to the Internet. But it's not working, and when one goes to the share NIC adapter and right-click on it and select PROPERTIES, and then from the list of it shows one select :

"Internet Protocol Version 4 (TCP/IPv4) then you see that everything is fine, the IP address 192.168.137.1 shows there and the subnet 255.255.255.0 also there. BUT ONCE YOU CLICK ON OK in that window, another Window POPS UP and a message saying:

"The IP address 192.168.137.1 you have entered for this network adapter has already being assigned to another adapter (in parenthesis it shows the same adapter that it's assigned in the SHARING tab in the main adapter), so there is not way to get out of that 'network card properties'. further down the message in that window says: DO YOU WANT TO FIX THE PROBLEM BY CHANGING THE IP ADDRESS FOR THIS ADAPTER? and the choices are: YES or NO

The command Line in an MSDOS window run as administrator: IPCONFIG /ALL doesn't shows any other virtual or real NIC with the IP address 192.168.137.1 except for the one that was assigned in the "Sharing" tab in the properties of the real NIC that connects directly to the ISP box.

I don't know if I have explained well this issue, but all I can say it's that no other network adapter has that IP address. I have a VirtualBox virtual adapter that it has an IP address totally different, the same as another Virtual VMWare adapter.

I even went to control panel > Device Manager > Delete both NIC's (the one that connects directly to the Internet and the one that acts as the SHARING network, and the issue remains the same.

I cannot use the Wireless Router to connect my tablets or WI-FI Cellphones.

I have several Operating Systems in the Same Computer to boot with, and Windows 8.1 for instance Network Sharing works fine in the same computer.

I'm running Windows 10 PRO 64bits

View 1 Replies

HP Pavillion G6 Notebook / WiFi Network Adapter Losing Connection?

Dec 5, 2015

OS: Windows 10 Home, 64-bit
PC: HP Pavillion g6 notebook

Network adapters: Ralink RT5390R 8-2.11bgn Wi-Fi Adapter (Date: 5/18/2015, Version: 5.0.57.0), and Realtek PCle FE Family Controller (Date: 4/01/2015, Version: 9.1.401.2015)

Problem: Every once in a while, I'll lose my internet connection. When I click the wifi icon on the taskbar, there will be no networks listed. The only way to fix the problem is to go the Device Manager, disable the Ralink Wi-Fi Adapter and then re-enable it. This fixes the problem anywhere from a of couple minutes to a couple of hours, then it happens again.

Solutions I've tried: I've tried doing a system restore but it failed and there are no more restore points. I've tried uninstalling the Ralink driver, downloading a new copy, and reinstalling it.

View 10 Replies

Windows Couldn't Automatically Bind IP Protocol Stack To Network Adapter

Sep 14, 2015

After kb 3081449 update i can't access internet.trbl info is

"windows couldn't automatically bind the ip protocol stack to network adapter."

I have updated Ethernet adapter and have latest wireless adapter.

View 7 Replies

Computer Freezing - Processor 100% Network Adapter Turned Off / Occasional WHEA Blue Screens

Oct 16, 2015

My laptop, an Acer, has been freezing multiple times a day recently. Sometimes I get a blue screen eventually that tells me there's been a WHEA error, sometimes none of that. Yesterday, I kept staring at the screen for a while instead of restarting, and eventually it recovered. I could see the processor activity climb to 100%, and that interrupts claimed up to 14% of the activity. Afterwards, the network adapter (Qualcomm Atheros AR956x) was turned off, apparently because of a 'code 12' - 'insufficient available resources'.

That problem was only resolved after a restart. When I shut the computer down, I got a screen telling the computer was being 'prepared' for a long time - sometimes I also see a blue screen showing the installation of updates at start-up, even if none were waiting to be installed. The drivers for the network adapter are up to date, version 10.0.0.318 (apparently dating from May 2015). I'm quite sure this is a software issue - 'chkdsk' doesn't find any problems, nor does 'sfc /scannow'. And a friend of mine with an Apple laptop running Windows 10 (we've never exchanged USB sticks or anything) has exactly the same problem since installing Windows 10 (different network adapter however, and seems to have improved recently).

View 1 Replies

Networking :: How To Remove TAP-Win32 Adapter

Aug 9, 2015

I had this issue on Windows 8.1, but never resolved it. It's not a massive issue, but when I boot up these adapters slow down the network connecting to the internet for around 30 seconds. I only use an Ethernet connection so, do not need these adapters.

I've tried disabling them and uninstalling them, but they always reappear!

View 2 Replies

Networking :: Adding A Netgear Wireless Adapter To PC

Oct 19, 2015

I have been connecting my PC to my router via a Ethernet cable and have had no issues but I want to move the PC to another room and run it off a wireless adapter. I tried a TP-Link USB adapter but it didn't work so I switched it for a Netgear one. That doesn't work either which makes me think there is something not right with my PC. I have installed and uninstalled multiple times, tired different USB ports but the Wireless Adapter doesn't seem to get an IP address and there are no Wireless settings in the control panel.But there are no Wireless setting and no connectivity to the Adapter.