Performance :: CPU Parking Options In Power Settings
Jan 10, 2016
I added a registry tweak that unlocked the power option to park the CPU...I am running a PC so battery life or power use is not an issue..just want to be clear about the min and max settings....thought it would be just ON or OFF...its the %s that confuse me....So if i set the min to 100% I assume that turns oof parking completely ?If I set max to 100% this allows the CPU to go to the max it can ? So is the min setting for parking ? and the max to just restrict the max the CPU will run ?If these assumptions are correct....what are the %s in between for ?
I have all the setting I can find that when I close lid to laptop it does nothing when plugged in. I have it set to do not sleep unless I tell it too period. Yes went through 'all' settings. So it will run scans, maintenance etc during night but like lid closed. But when I get up and open lid it wants me to sign back in and scan say it couldn't run.
Have been running Windows 10 on a Packard Bell laptop since August and suddenly the login screen password box is disabled on start up. None of the sign in screen options (power options, language, etc.) are enabled. I can't get to any safe mode boot options either so at the moment I'm stuck.
The Power options on the Start Menu has 3 items: Sleep, Shut down and Restart. I've created a shortcut to lock the screen, which is on the desktop. Is it possible to include it in the Power options?
I recently upgraded Windows 7 to Windows 10. When I power down the system from the menu, my computer does not completely turn off. The procedure I use is described below:
Click Windows_Start_button > Power > Shutdown
The system closes applications and appears to initiate a shutdown procedure. Everything appears to be shut off, but my mouse is still lit up. I do notice that the fan stops and everything else appears to be completely shut down. When I was running Windows 7 before my upgrade, my system completely powered down.
I have a dual boot system with Linux, and when I power down from Linux, the shutdown is complete, so I don't think I accidentally did anything to the hardware or BIOS.
Ugraded from windows 10 rtm to windows 10 th2 and lost the option to restore a power plan to its default settings, so when i edit a power plan, i cant reset it to the defaults, is this normal with th2??? The first screenshot is of the option being there, well what its supposed to be and the other two are of my setup, as you can see i change a setting to see if it would pop up to restore defaults and it just doesnt....
With Windows 8,1 I was able to sign out of my account and then put the PC to sleep (or shutdown, restart or hibernate) by selecting the option in the sign-in screen. But there is no power icon or any power options on the Windows 10 sign-in screen. I can only put the PC into sleep mode while signed in.
I apparently have Fast Startup enabled after upgrading to Win10. I would like to turn it off so I am not automatically logged on when I power up. (We don't have the IDs password protected on this desktop PC.) There are very simple instructions given in a TenForums tutorial, but my Power Options don't match what is shown in the tutorial. In particular, under Shutdown Settings I have only Sleep and Lock - no "Turn on fast startup"; no "Hibernate". Since this is a desktop there is also no "On battery" options, but that is obviously not a concern. But is the option of turning on and off Hibernate available only on laptops?
In Windows 8, I could right click on the task bar's battery icon and then swap between pre-set power settings. In Windows 10 this is no longer possible. I need to right click on it, then click on power options and then there select the new power plan. so one EXTRA step. I know it does not sound like much, but it is 50% slower...
Power & Sleep settings won't save my screen brightness settings. On my plugged in HP laptop default the screen brightness is set to maximum despite making changes in the Power & Sleep menu screen. I've even tried creating my own Power Plan but the next time it restarts it changes to the HP recommended power plan which sets the screen brightness to maximum.
I installed an application "Clone File Checker" and uninstalled that using "iObit Uninstaller" with Power Unistall" option. After that, i am not able to open Control Panel, Programs & Features, Power Options and System from the Start Menu. Clicking on each of these gives an error in the enclosed screenshots, but all of them display the error message "This file does not have an program associated with it to perform this action. Please install a program, or if one is already installed, create an association in the Defaults Program Control Panel". Only the file names are different. When I try to set the Default Applications, I do get a similar error message.
Moreover, clicking on the File Explorer from the Start Menu opens the Explorer screen, but when I pin to the Taskbar and subsequently attempt to open tit from Task Bar, I get an error message.
I've notice that on windows 10 and 8.1, task manager would show the my max cpu core speed is 2.3-2.4 ghz. However, my Core 2 Quad q8400 is rated at 2.66 ghz. I tried changing the power settings in windows and try lowering my cpu temperature, but my speed would never reach 2.66 ghz.
You know how when you click on the 3 dots you get a options list. Well all of a sudden from the change size tool and the next 4 are greyed out will no longer work.
I have been having some really annoying performance problems after upgrading my laptop from win8 to win 10.
My laptop is a asus ux32vd, with an Intel i7-3517U cpu.(normal core speed: 1.7ghz, turbo: 2.4ghz)
CPU-Z is showing ~990mhz constantly, no matter how high load there is on the cpu, and what temperature it is(usually around 50-60C).
I just cant figure out what is going on, and why it keeps throttling. Everything is running really slow, chrome is slow, facebook is tough to scroll through. Tried resetting the power plans to default, that didnt work. sometimes it works for changing power plan, and the restarting, but its not consistent at all. What it could be?
When I try and access sign-in options in the settings account screen, I get the dreaded dots that shoot across the screen but the sign-in options don't open.
Also i cannot access my microsoft account, when I try I just get the circle of dots.
I have an Acer Aspire E1-572 running Windows 10. The computer has an Elan smart pad drivers. I recently updated to windows 10 but after it was installed, my touchpad settings changed. I tried to change the settings to how they were before, now i can no longer adjust the sensativity or have the inertia " momentum" settings enabled. Those are no longer options listed on the driver settings.
I am disabled with limited mobiity and I rely on the ability to flick the mouse and have the cursor travel across the screen. Without these settings I am struggling to use the computer.
I am the only owner of my computer. And all the proxy options are grayed out.. ! "Some settings are managed by your organization" . I am using Windows 10 Pro.
When I start up my computer the lock screen shows 2 accounts. One has just my name, which I am trying to remove because it default tries to log into. The second is my microsoft @live account which Ive used from day one. When I go into accounts it shows I have 1 account on this computer, its the one I use @live to sign in. Really confusing and Im not sure that to do.
i have a acer aspire 1v , windows ten just updated with cortana in australia , since the update my touch pad has no options for two finger functions
when i was running windows 8.1 i had options for three finger functions , that went when i installed windows ten for the first time and i could only get two finger options available , now with the latest install there is only options for one finger functions
I am have synaptics pointing device but i though i had elan pointing device...
what is also weird is when i open the synaptics pointing device in the tray manager , i have an option for accessories with pressure graph and moonpad options , not sure what they are but clicked on them and i get a message this option requires a synaptics pointing device and synaptics pointing device driver
I've tried device manager check driver update and it says working properly and driver is using the latest update.
I am running Win 10 on a laptop. I have changed all the power settings to "NEVER" for everything. The laptop is on AC (not battery). No power outages.
But when I come back after being away from the laptop for an hour or so. It is in sleep mode (I think) - I have to turn the button on and it comes on (to the way it was when I left but loses the connect to 2 of my USB ports. SO I have to restart the computer to be able to do anything.
