Drivers/Hardware :: Elan Touchpad Since Update No Two Finger Options In Settings
Dec 5, 2015
i have a acer aspire 1v , windows ten just updated with cortana in australia , since the update my touch pad has no options for two finger functions
when i was running windows 8.1 i had options for three finger functions , that went when i installed windows ten for the first time and i could only get two finger options available , now with the latest install there is only options for one finger functions
I am have synaptics pointing device but i though i had elan pointing device...
what is also weird is when i open the synaptics pointing device in the tray manager , i have an option for accessories with pressure graph and moonpad options , not sure what they are but clicked on them and i get a message this option requires a synaptics pointing device and synaptics pointing device driver
I've tried device manager check driver update and it says working properly and driver is using the latest update.
View 2 Replies
Similar Messages:
Mar 31, 2015
Been reading here and using win 10 from the outset. On latest build, updated this morning. This Elan touchpad driver keeps coming in through windows update and it just screws up my touchpad more than anything. When it loads up I can no longer use right or left click functions on the touchpad. I can find no way to stop the update.
Is there any method for stopping a particular windows update from loading? I keep uninstalling it but it comes back all the time. I am on an Asus G750J laptop.
View 9 Replies
Aug 27, 2015
Prior to installing Windows 10, I would disable the touchpad on my PC (hate it!) by going to Settings - Mouse Properties - ELAN - Stop Device. Since installing Windows 10, the ELAN device does not show up under devices and I cannot disable.
View 1 Replies
Apr 14, 2016
I just got a second hand laptop - Acer V3-771G with an Elan touchpad and I put a new SSHD hard drive in it and installed Windows 10 fresh.
I see lots of issues with ELAN touchpads but it seems as though Microsoft has produce one that installs and fixes most scrolling issues.
However, I have a strange one. When I enable vertical scrolling in the driver, it works as long as the mouse is active - and for up to 5 seconds after. But when I stop using the touchpad and go to scroll again after 5 seconds, it doesn't work anymore! It's like it disables it after inactivity - but only 5 seconds?
I've uninstalled and reinstalled drivers, tried various versions - but of course Acer doesn't support Windows 10 on this older model laptop (circa 2012) so there are no specific drivers for it on their site. Everything works except for this scrolling after 5 seconds - which I can recreate every single time.
View 2 Replies
Sep 29, 2015
I have an Acer Aspire E1-572 running Windows 10. The computer has an Elan smart pad drivers. I recently updated to windows 10 but after it was installed, my touchpad settings changed. I tried to change the settings to how they were before, now i can no longer adjust the sensativity or have the inertia " momentum" settings enabled. Those are no longer options listed on the driver settings.
I am disabled with limited mobiity and I rely on the ability to flick the mouse and have the cursor travel across the screen. Without these settings I am struggling to use the computer.
View 3 Replies
Aug 14, 2015
The settings windows for my ELAN pad is empty. When I change the registry settings then the entrys are visible, but after restarting windows these settings were reset and th window is empty again. What to do, to prevent these changes?
View 4 Replies
Sep 10, 2015
I am using a dell inspiron n5010. the original synaptics driver keeps crashing every few days. I tried replacing it with microsoft drivers but 2 finger scrolling doesn't work with this. I need 2 finger scrolling since i dont have a separate mouse. Is there a solution?
View 5 Replies
Aug 30, 2015
I've just upgraded to Win10 and the ability to open a new tab with a two-finger click seems to have disappeared. I used this a lot in Win8.1 so it would be nice to get it back. I've not been able to find anything about it on the net yet....
View 7 Replies
Mar 19, 2016
Ever since I upgraded my Dell Inspiron 15-3521 laptop to Windows 10 from Windows 8.1 last year I've had intermittent issues with the touchpad. Specifically, about 25% of the times that I turn on the computer I'm completely unable to scroll up or down using two finger multi-touch gestures (putting two fingers on the touchpad and moving them up or down to make a webpage scroll up or down, for example). The mouse cursor will also randomly stop responding for a few seconds at a time when the scrolling issue is occuring. Usually I just restart the computer to get around it but I'd like to fix the problem once and for all.
I've tried fixing the issue a number of times over the past few months by upgrading the drivers from Dell's website as well as attempting other fixes suggested on other forum posts describing the same issues but haven't had any luck. I'm ready to try anything you suggest, including things I may have done already (ex: downloading the latest drivers), preferably saving more drastic measures for last. In addition, I should mention that after upgrading to Windows 10 I also began having intermittent issues with sound quality (bass is very low) when using headphones.
View 2 Replies
Aug 25, 2015
I decided to make the jump to Windows 10 from Windows 8.1, and I have to say, the design looks simpler to use, but this new OS software has done something with my touchpad. Originally, on my Windows 8.1, I was able to scroll through whatever web pages or folders in my computer with one finger using my touchpad. With this new update, initially, I thought it broke my touchpad completely, but the problem has been narrowed down to having to now use two fingers to scroll in the most awkward way as this touchpad doesn't seemed to be designed for two finger scrolling. Is there a way for me to change this back? Would I have to revert back to Windows 8.1 to get my one finger scrolling back?
The laptop I am using is a Gateway NE56R34u, and the touchpad is an ELAN.
View 1 Replies
Jul 31, 2015
i just upgraded to Windows 10, and everything is working fine exept for my Elan touchpad.
I have never experienced it not working for Windows 8.
View 9 Replies
Oct 6, 2015
I updated my laptop(HP envy m6 notebook) a few days ago from windows 8.1 to 10 and since then my touchpad/pointer has been freezing for 4-5 seconds after I touch any button on the keypad. eg. if i hit enter then i cannot move the pointer for a few seconds.. I can still use the left and right click even while the pointer will not move.
Everything worked perfectly before i upgraded to windows 10 and everything else apart from the freezing mouse seems to be working just fine after the upgrade.
View 2 Replies
Oct 12, 2015
just today my touchpad on my Asus laptop was working perfectly and for some reason stopped working. I can move the cursor with it and perform dragging gesture but two finger gestures aren't working, all drivers are installed so i don't know what to do...
View 1 Replies
Jul 30, 2015
So I'm wondering how I can get the trackpad to behave the way it did in Win7, with scrolling being controlled by one finger on the side and bottom of the trackpad, instead of a 2 finger gesture in the center. It seems like I have all the settings set properly, however it hasn't changed. Am I missing something?
View 1 Replies
May 4, 2015
After installing build 10074 followed by Windows Update, I got the following report, "ELAN DRIVER UPDATE FOR ELAN INPUT DEVICE FAILED - ERROR CODE 0x80070103"
View 1 Replies
Dec 12, 2015
I want to change the three finger action on my laptop touchpad. I have win 8.1 driver synaptics driver installed. The three finger gestures can't be changed, only enabled or disbaled. Now, the gestures do the forward and backward navigation on left/right three finger swipe and pageup and pagedown action on up/down swipe. I want to change the up/down or if possible left/right gestures to the new actions introduced in win 10.
researched a bit online and I think that maybe they can be changed through registry edits.
Secondly, I also want to change three finger press to Notification centre. I have a option to launch any program with this gesture so I want to know that if an executable shortcut can be created to windows notification centre (shortcut: Win+A).
View 6 Replies
Aug 30, 2015
For some reason two finger scroll just stopped working even though it was working about an hour ago. Why it changed or what i did to change it. I tried entering the control panel, mouse, then synaptics settings, and enabling vertical scrolling, but that didn't seem to fix the problem.
View 1 Replies
Aug 29, 2015
I have all the setting I can find that when I close lid to laptop it does nothing when plugged in. I have it set to do not sleep unless I tell it too period. Yes went through 'all' settings. So it will run scans, maintenance etc during night but like lid closed. But when I get up and open lid it wants me to sign back in and scan say it couldn't run.
View 1 Replies
Sep 14, 2015
You know how when you click on the 3 dots you get a options list. Well all of a sudden from the change size tool and the next 4 are greyed out will no longer work.
View 2 Replies
Nov 25, 2015
1. Initially I couldn't open photos on Laptop after I installed Windows 10 3 days ago.
2. Told in Account Settings to Verify account, Clicked on Verify and no response every time.
3. Changed to User account and now cannot change back to Administrator Account.
4. Nothing in my settings will respond when clicked.
Tried troubleshooting links and all sorts though to no avail.
View 1 Replies
Jan 10, 2016
I added a registry tweak that unlocked the power option to park the CPU...I am running a PC so battery life or power use is not an issue..just want to be clear about the min and max settings....thought it would be just ON or OFF...its the %s that confuse me....So if i set the min to 100% I assume that turns oof parking completely ?If I set max to 100% this allows the CPU to go to the max it can ? So is the min setting for parking ? and the max to just restrict the max the CPU will run ?If these assumptions are correct....what are the %s in between for ?
View 3 Replies
Oct 31, 2015
When I try and access sign-in options in the settings account screen, I get the dreaded dots that shoot across the screen but the sign-in options don't open.
Also i cannot access my microsoft account, when I try I just get the circle of dots.
View 3 Replies
Mar 13, 2016
When I go to Settings > Network and Internet i have very few option unlike most peoples windows 10 I've seen.
I have:
Data usage
Ethernet
Dial-Up
VPN
Proxy
But in videos and friends I've seen many more options...
View 1 Replies
Feb 29, 2016
I am the only owner of my computer. And all the proxy options are grayed out.. ! "Some settings are managed by your organization" . I am using Windows 10 Pro.
View 10 Replies
Nov 6, 2015
I just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
View 2 Replies
Aug 24, 2015
When I start up my computer the lock screen shows 2 accounts. One has just my name, which I am trying to remove because it default tries to log into. The second is my microsoft @live account which Ive used from day one. When I go into accounts it shows I have 1 account on this computer, its the one I use @live to sign in. Really confusing and Im not sure that to do.
View 5 Replies
